Pull ext4 fixes from Ted Ts'o:
 "Fix two regressions in ext4, one report by syzkaller[1], and reported
  by multiple users (and tracked by regzbot[2])"

[1] https://syzkaller.appspot.com/bug?extid=4acc7d910e617b360859
[2] https://linux-regtracking.leemhuis.info/regzbot/regression/ZIauBR7YiV3rVAHL@glitch/

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: drop the call to ext4_error() from ext4_get_group_info()
  Revert "ext4: remove unnecessary check in ext4_bg_num_gdb_nometa"

Pull smb client fixes from Steve French:
 "Eight, mostly small, smb3 client fixes:

   - important fix for deferred close oops (race with unmount) found
     with xfstest generic/098 to some servers

   - important reconnect fix

   - fix problem with max_credits mount option

   - two multichannel (interface related) fixes

   - one trivial removal of confusing comment

   - two small debugging improvements (to better spot crediting
     problems)"

* tag '6.4-rc6-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add a warning when the in-flight count goes negative
  cifs: fix lease break oops in xfstest generic/098
  cifs: fix max_credits implementation
  cifs: fix sockaddr comparison in iface_cmp
  smb/client: print "Unknown" instead of bogus link speed value
  cifs: print all credit counters in DebugData
  cifs: fix status checks in cifs_tree_connect
  smb: remove obsolete comment

A recent patch added a call to ext4_error() which is problematic since
some callers of the ext4_get_group_info() function may be holding a
spinlock, whereas ext4_error() must never be called in atomic context.

This triggered a report from Syzbot: "BUG: sleeping function called from
invalid context in ext4_update_super" (see the link below).

Therefore, drop the call to ext4_error() from ext4_get_group_info(). In
the meantime use eight characters tabs instead of nine characters ones.

Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/
Fixes: 5354b2af ("ext4: allow ext4_get_group_info() to fail")
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com

This reverts commit ad3f09be.

The reverted commit was intended to simpfy the code to get group
descriptor block number in non-meta block group by assuming
s_gdb_count is block number used for all non-meta block group descriptors.
However s_gdb_count is block number used for all meta *and* non-meta
group descriptors. So s_gdb_group will be > actual group descriptor block
number used for all non-meta block group which should be "total non-meta
block group" / "group descriptors per block", e.g. s_first_meta_bg.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230613225025.3859522-1-shikemeng@huaweicloud.com
Fixes: ad3f09be ("ext4: remove unnecessary check in ext4_bg_num_gdb_nometa")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

We've seen the in-flight count go into negative with some
internal stress testing in Microsoft.

Adding a WARN when this happens, in hope of understanding
why this happens when it happens.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

umount can race with lease break so need to check if
tcon->ses->server is still valid to send the lease
break response.
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Fixes: 59a556ae ("SMB3: drop reference to cfile before sending oplock break")
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull NIOS2 dts fix from Dinh Nguyen:

 - Fix tse_mac "max-frame-size" property

* tag 'nios2_fix_v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  nios2: dts: Fix tse_mac "max-frame-size" property

The given value of 1518 seems to refer to the layer 2 ethernet frame
size without 802.1Q tag. Actual use of the "max-frame-size" including in
the consumer of the "altr,tse-1.0" compatible is the MTU.

Fixes: 95acd4c7 ("nios2: Device tree support")
Fixes: 61c610ec ("nios2: Add Max10 device tree")
Cc: <stable@vger.kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Pull devicetree fixes from Rob Herring:

 - Fix missing of_node_put() in init_overlay_changeset()

 - Fix schema for qcom,pmic-mpp "qcom,paired" property

 - Fix 'additionalProperties' in silvaco,i3c-master binding

 - usage-model.rst: Use documented "arm,primecell" compatible string

 - Update Damien Le Moal's email address

 - Fixes in Realtek Bluetooth binding

* tag 'devicetree-fixes-for-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pinctrl: qcom,pmic-mpp: Fix schema for "qcom,paired"
  dt-bindings: i3c: silvaco,i3c-master: fix missing schema restriction
  of: overlay: Fix missing of_node_put() in error case of init_overlay_changeset()
  docs: zh_CN/devicetree: sync usage-model fix
  docs: dt: fix documented Primecell compatible string
  dt-bindings: Change Damien Le Moal's contact email
  dt-bindings: net: realtek-bluetooth: Fix double RTL8723CS in desc
  dt-bindings: net: realtek-bluetooth: Fix RTL8821CS binding

The "qcom,paired" schema is all wrong. First, it's a list rather than an
object(dictionary). Second, it is missing a required type. The meta-schema
normally catches this, but schemas under "$defs" was not getting checked.
A fix for that is pending.

Fixes: f9a06b81 ("dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230418150606.1528107-1-robh@kernel.orgSigned-off-by: Rob Herring <robh@kernel.org>

Merge tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "19 hotfixes. 14 are cc:stable and the remainder address issues which
  were introduced during this development cycle or which were considered
  inappropriate for a backport"

* tag 'mm-hotfixes-stable-2023-06-12-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  zswap: do not shrink if cgroup may not zswap
  page cache: fix page_cache_next/prev_miss off by one
  ocfs2: check new file size on fallocate call
  mailmap: add entry for John Keeping
  mm/damon/core: fix divide error in damon_nr_accesses_to_accesses_bp()
  epoll: ep_autoremove_wake_function should use list_del_init_careful
  mm/gup_test: fix ioctl fail for compat task
  nilfs2: reject devices with insufficient block count
  ocfs2: fix use-after-free when unmounting read-only filesystem
  lib/test_vmalloc.c: avoid garbage in page array
  nilfs2: fix possible out-of-bounds segment allocation in resize ioctl
  riscv/purgatory: remove PGO flags
  powerpc/purgatory: remove PGO flags
  x86/purgatory: remove PGO flags
  kexec: support purgatories with .text.hot sections
  mm/uffd: allow vma to merge as much as possible
  mm/uffd: fix vma operation where start addr cuts part of vma
  radix-tree: move declarations to header
  nilfs2: fix incomplete buffer cleanup in nilfs_btnode_abort_change_key()

Before storing a page, zswap first checks if the number of stored pages
exceeds the limit specified by memory.zswap.max, for each cgroup in the
hierarchy.  If this limit is reached or exceeded, then zswap shrinking is
triggered and short-circuits the store attempt.

However, since the zswap's LRU is not memcg-aware, this can create the
following pathological behavior: the cgroup whose zswap limit is 0 will
evict pages from other cgroups continually, without lowering its own zswap
usage.  This means the shrinking will continue until the need for swap
ceases or the pool becomes empty.

As a result of this, we observe a disproportionate amount of zswap
writeback and a perpetually small zswap pool in our experiments, even
though the pool limit is never hit.

More generally, a cgroup might unnecessarily evict pages from other
cgroups before we drive the memcg back below its limit.

This patch fixes the issue by rejecting zswap store attempt without
shrinking the pool when obj_cgroup_may_zswap() returns false.

[akpm@linux-foundation.org: fix return of unintialized value]
[akpm@linux-foundation.org: s/ENOSPC/ENOMEM/]
Link: https://lkml.kernel.org/r/20230530222440.2777700-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20230530232435.3097106-1-nphamcs@gmail.com
Fixes: f4840ccf ("zswap: memcg accounting")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Ackerley Tng reported an issue with hugetlbfs fallocate here[1].  The
issue showed up after the conversion of hugetlb page cache lookup code to
use page_cache_next_miss.  Code in hugetlb fallocate, userfaultfd and GUP
is now using page_cache_next_miss to determine if a page is present the
page cache.  The following statement is used.

	present = page_cache_next_miss(mapping, index, 1) != index;

There are two issues with page_cache_next_miss when used in this way.
1) If the passed value for index is equal to the 'wrap-around' value,
   the same index will always be returned.  This wrap-around value is 0,
   so 0 will be returned even if page is present at index 0.
2) If there is no gap in the range passed, the last index in the range
   will be returned.  When passed a range of 1 as above, the passed
   index value will be returned even if the page is present.
The end result is the statement above will NEVER indicate a page is
present in the cache, even if it is.

As noted by Ackerley in [1], users can see this by hugetlb fallocate
incorrectly returning EEXIST if pages are already present in the file.  In
addition, hugetlb pages will not be included in core dumps if they need to
be brought in via GUP.  userfaultfd UFFDIO_COPY also uses this code and
will not notice pages already present in the cache.  It may try to
allocate a new page and potentially return ENOMEM as opposed to EEXIST.

Both page_cache_next_miss and page_cache_prev_miss have similar issues.
Fix by:
- Check for index equal to 'wrap-around' value and do not exit early.
- If no gap is found in range, return index outside range.
- Update function description to say 'wrap-around' value could be
  returned if passed as index.

[1] https://lore.kernel.org/linux-mm/cover.1683069252.git.ackerleytng@google.com/

Link: https://lkml.kernel.org/r/20230602225747.103865-2-mike.kravetz@oracle.com
Fixes: d0ce0e47 ("mm/hugetlb: convert hugetlb fault paths to use alloc_hugetlb_folio()")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Cc: Erdem Aktas <erdemaktas@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Vishal Annapurve <vannapurve@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When changing a file size with fallocate() the new size isn't being
checked.  In particular, the FSIZE ulimit isn't being checked, which makes
fstest generic/228 fail.  Simply adding a call to inode_newsize_ok() fixes
this issue.

Link: https://lkml.kernel.org/r/20230529152645.32680-1-lhenriques@suse.deSigned-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Mark Fasheh <mark@fasheh.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Map my corporate address to my personal one, as I am leaving the
company.

Link: https://lkml.kernel.org/r/20230531144839.1157112-1-john@keeping.me.ukSigned-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If 'aggr_interval' is smaller than 'sample_interval', max_nr_accesses in
damon_nr_accesses_to_accesses_bp() becomes zero which leads to divide
error, let's validate the values of them in damon_set_attrs() to fix it,
which similar to others attrs check.

Link: https://lkml.kernel.org/r/20230527032101.167788-1-wangkefeng.wang@huawei.com
Fixes: 2f5bef5a ("mm/damon/core: update monitoring results for new monitoring attributes")
Reported-by: syzbot+841a46899768ec7bec67@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=841a46899768ec7bec67
Link: https://lore.kernel.org/damon/00000000000055fc4e05fc975bc2@google.com/Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

autoremove_wake_function uses list_del_init_careful, so should epoll's
more aggressive variant.  It only doesn't because it was copied from an
older wait.c rather than the most recent.

[bsegall@google.com: add comment]
  Link: https://lkml.kernel.org/r/xm26bki0ulsr.fsf_-_@google.com
Link: https://lkml.kernel.org/r/xm26pm6hvfer.fsf@google.com
Fixes: a16ceb13 ("epoll: autoremove wakers even more aggressively")
Signed-off-by: Ben Segall <bsegall@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When tools/testing/selftests/mm/gup_test.c is compiled as 32bit, then run
on arm64 kernel, it reports "ioctl: Inappropriate ioctl for device".

Fix it by filling compat_ioctl in gup_test_fops

Link: https://lkml.kernel.org/r/20230526022125.175728-1-haibo.li@mediatek.comSigned-off-by: Haibo Li <haibo.li@mediatek.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The current sanity check for nilfs2 geometry information lacks checks for
the number of segments stored in superblocks, so even for device images
that have been destructively truncated or have an unusually high number of
segments, the mount operation may succeed.

This causes out-of-bounds block I/O on file system block reads or log
writes to the segments, the latter in particular causing
"a_ops->writepages" to repeatedly fail, resulting in sync_inodes_sb() to
hang.

Fix this issue by checking the number of segments stored in the superblock
and avoiding mounting devices that can cause out-of-bounds accesses.  To
eliminate the possibility of overflow when calculating the number of
blocks required for the device from the number of segments, this also adds
a helper function to calculate the upper bound on the number of segments
and inserts a check using it.

Link: https://lkml.kernel.org/r/20230526021332.3431-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+7d50f1e54a12ba3aeae2@syzkaller.appspotmail.com
  Link: https://syzkaller.appspot.com/bug?extid=7d50f1e54a12ba3aeae2Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It's trivial to trigger a use-after-free bug in the ocfs2 quotas code using
fstest generic/452.  After a read-only remount, quotas are suspended and
ocfs2_mem_dqinfo is freed through ->ocfs2_local_free_info().  When unmounting
the filesystem, an UAF access to the oinfo will eventually cause a crash.
 
BUG: KASAN: slab-use-after-free in timer_delete+0x54/0xc0
Read of size 8 at addr ffff8880389a8208 by task umount/669
...
Call Trace:
 <TASK>
 ...
 timer_delete+0x54/0xc0
 try_to_grab_pending+0x31/0x230
 __cancel_work_timer+0x6c/0x270
 ocfs2_disable_quotas.isra.0+0x3e/0xf0 [ocfs2]
 ocfs2_dismount_volume+0xdd/0x450 [ocfs2]
 generic_shutdown_super+0xaa/0x280
 kill_block_super+0x46/0x70
 deactivate_locked_super+0x4d/0xb0
 cleanup_mnt+0x135/0x1f0
 ...
 </TASK>

Allocated by task 632:
 kasan_save_stack+0x1c/0x40
 kasan_set_track+0x21/0x30
 __kasan_kmalloc+0x8b/0x90
 ocfs2_local_read_info+0xe3/0x9a0 [ocfs2]
 dquot_load_quota_sb+0x34b/0x680
 dquot_load_quota_inode+0xfe/0x1a0
 ocfs2_enable_quotas+0x190/0x2f0 [ocfs2]
 ocfs2_fill_super+0x14ef/0x2120 [ocfs2]
 mount_bdev+0x1be/0x200
 legacy_get_tree+0x6c/0xb0
 vfs_get_tree+0x3e/0x110
 path_mount+0xa90/0xe10
 __x64_sys_mount+0x16f/0x1a0
 do_syscall_64+0x43/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 650:
 kasan_save_stack+0x1c/0x40
 kasan_set_track+0x21/0x30
 kasan_save_free_info+0x2a/0x50
 __kasan_slab_free+0xf9/0x150
 __kmem_cache_free+0x89/0x180
 ocfs2_local_free_info+0x2ba/0x3f0 [ocfs2]
 dquot_disable+0x35f/0xa70
 ocfs2_susp_quotas.isra.0+0x159/0x1a0 [ocfs2]
 ocfs2_remount+0x150/0x580 [ocfs2]
 reconfigure_super+0x1a5/0x3a0
 path_mount+0xc8a/0xe10
 __x64_sys_mount+0x16f/0x1a0
 do_syscall_64+0x43/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Link: https://lkml.kernel.org/r/20230522102112.9031-1-lhenriques@suse.deSigned-off-by: Luís Henriques <lhenriques@suse.de>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It turns out that alloc_pages_bulk_array() does not treat the page_array
parameter as an output parameter, but rather reads the array and skips any
entries that have already been allocated.

This is somewhat unexpected and breaks this test, as we allocate the pages
array uninitialised on the assumption it will be overwritten.

As a result, the test was referencing uninitialised data and causing the
PFN to not be valid and thus a WARN_ON() followed by a null pointer deref
and panic.

In addition, this is an array of pointers not of struct page objects, so we
need only allocate an array with elements of pointer size.

We solve both problems by simply using kcalloc() and referencing
sizeof(struct page *) rather than sizeof(struct page).

Link: https://lkml.kernel.org/r/20230524082424.10022-1-lstoakes@gmail.com
Fixes: 869cb29a ("lib/test_vmalloc.c: add vm_map_ram()/vm_unmap_ram() test case")
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Syzbot reports that in its stress test for resize ioctl, the log writing
function nilfs_segctor_do_construct hits a WARN_ON in
nilfs_segctor_truncate_segments().

It turned out that there is a problem with the current implementation of
the resize ioctl, which changes the writable range on the device (the
range of allocatable segments) at the end of the resize process.

This order is necessary for file system expansion to avoid corrupting the
superblock at trailing edge.  However, in the case of a file system
shrink, if log writes occur after truncating out-of-bounds trailing
segments and before the resize is complete, segments may be allocated from
the truncated space.

The userspace resize tool was fine as it limits the range of allocatable
segments before performing the resize, but it can run into this issue if
the resize ioctl is called alone.

Fix this issue by changing nilfs_sufile_resize() to update the range of
allocatable segments immediately after successful truncation of segment
space in case of file system shrink.

Link: https://lkml.kernel.org/r/20230524094348.3784-1-konishi.ryusuke@gmail.com
Fixes: 4e33f9ea ("nilfs2: implement resize ioctl")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+33494cd0df2ec2931851@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/0000000000005434c405fbbafdc5@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-4-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-3-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

If profile-guided optimization is enabled, the purgatory ends up with
multiple .text sections.  This is not supported by kexec and crashes the
system.

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-2-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Cc: <stable@vger.kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "kexec: Fix kexec_file_load for llvm16 with PGO", v7.

When upreving llvm I realised that kexec stopped working on my test
platform.

The reason seems to be that due to PGO there are multiple .text sections
on the purgatory, and kexec does not supports that.


This patch (of 4):

Clang16 links the purgatory text in two sections when PGO is in use:

  [ 1] .text             PROGBITS         0000000000000000  00000040
       00000000000011a1  0000000000000000  AX       0     0     16
  [ 2] .rela.text        RELA             0000000000000000  00003498
       0000000000000648  0000000000000018   I      24     1     8
  ...
  [17] .text.hot.        PROGBITS         0000000000000000  00003220
       000000000000020b  0000000000000000  AX       0     0     1
  [18] .rela.text.hot.   RELA             0000000000000000  00004428
       0000000000000078  0000000000000018   I      24    17     8

And both of them have their range [sh_addr ... sh_addr+sh_size] on the
area pointed by `e_entry`.

This causes that image->start is calculated twice, once for .text and
another time for .text.hot. The second calculation leaves image->start
in a random location.

Because of this, the system crashes immediately after:

kexec_core: Starting new kernel

Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-0-b05c520b7296@chromium.org
Link: https://lkml.kernel.org/r/20230321-kexec_clang16-v7-1-b05c520b7296@chromium.org
Fixes: 93045705 ("kernel/kexec_file.c: split up __kexec_load_puragory")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Philipp Rudo <prudo@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

We used to not pass in the pgoff correctly when register/unregister uffd
regions, it caused incorrect behavior on vma merging and can cause
mergeable vmas being separate after ioctls return.

For example, when we have:

  vma1(range 0-9, with uffd), vma2(range 10-19, no uffd)

Then someone unregisters uffd on range (5-9), it should logically become:

  vma1(range 0-4, with uffd), vma2(range 5-19, no uffd)

But with current code we'll have:

  vma1(range 0-4, with uffd), vma3(range 5-9, no uffd), vma2(range 10-19, no uffd)

This patch allows such merge to happen correctly before ioctl returns.

This behavior seems to have existed since the 1st day of uffd.  Since
pgoff for vma_merge() is only used to identify the possibility of vma
merging, meanwhile here what we did was always passing in a pgoff smaller
than what we should, so there should have no other side effect besides not
merging it.  Let's still tentatively copy stable for this, even though I
don't see anything will go wrong besides vma being split (which is mostly
not user visible).

Link: https://lkml.kernel.org/r/20230517190916.3429499-3-peterx@redhat.com
Fixes: 86039bd3 ("userfaultfd: add new syscall to provide memory externalization")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "mm/uffd: Fix vma merge/split", v2.

This series contains two patches that fix vma merge/split for userfaultfd
on two separate issues.

Patch 1 fixes a regression since 6.1+ due to something we overlooked when
converting to maple tree apis.  The plan is we use patch 1 to replace the
commit "2f628010799e (mm: userfaultfd: avoid passing an invalid range to
vma_merge())" in mm-hostfixes-unstable tree if possible, so as to bring
uffd vma operations back aligned with the rest code again.

Patch 2 fixes a long standing issue that vma can be left unmerged even if
we can for either uffd register or unregister.

Many thanks to Lorenzo on either noticing this issue from the assert
movement patch, looking at this problem, and also provided a reproducer on
the unmerged vma issue [1].

[1] https://gist.github.com/lorenzo-stoakes/a11a10f5f479e7a977fc456331266e0e


This patch (of 2):

It seems vma merging with uffd paths is broken with either
register/unregister, where right now we can feed wrong parameters to
vma_merge() and it's found by recent patch which moved asserts upwards in
vma_merge() by Lorenzo Stoakes:

https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/

It's possible that "start" is contained within vma but not clamped to its
start.  We need to convert this into either "cannot merge" case or "can
merge" case 4 which permits subdivision of prev by assigning vma to prev. 
As we loop, each subsequent VMA will be clamped to the start.

This patch will eliminate the report and make sure vma_merge() calls will
become legal again.

One thing to mention is that the "Fixes: 29417d29" below is there only
to help explain where the warning can start to trigger, the real commit to
fix should be 69dbe6da.  Commit 29417d29 helps us to identify the
issue, but unfortunately we may want to keep it in Fixes too just to ease
kernel backporters for easier tracking.

Link: https://lkml.kernel.org/r/20230517190916.3429499-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230517190916.3429499-2-peterx@redhat.com
Fixes: 69dbe6da ("userfaultfd: use maple tree iterator to iterate VMAs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Closes: https://lore.kernel.org/all/ZFunF7DmMdK05MoF@FVFF77S0Q05N.cambridge.arm.com/
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it.  This means the
function definition causes a missing-prototype warning:

lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]

Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.

[zhangpeng.00@bytedance.com: fix building radix tree test suite]
  Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A syzbot fault injection test reported that nilfs_btnode_create_block, a
helper function that allocates a new node block for b-trees, causes a
kernel BUG for disk images where the file system block size is smaller
than the page size.

This was due to unexpected flags on the newly allocated buffer head, and
it turned out to be because the buffer flags were not cleared by
nilfs_btnode_abort_change_key() after an error occurred during a b-tree
update operation and the buffer was later reused in that state.

Fix this issue by using nilfs_btnode_delete() to abandon the unused
preallocated buffer in nilfs_btnode_abort_change_key().

Link: https://lkml.kernel.org/r/20230513102428.10223-1-konishi.ryusuke@gmail.comSigned-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b0a35a5c1f7e846d3b09@syzkaller.appspotmail.com
Closes: https://lkml.kernel.org/r/000000000000d1d6c205ebc4d512@google.comTested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A recent commit gated the core dumping task exit logic on current->flags
remaining consistent in terms of PF_{IO,USER}_WORKER at task exit time.
This exposed a problem with the io-wq handling of that, which explicitly
clears PF_IO_WORKER before calling do_exit().

The reasons for this manual clear of PF_IO_WORKER is historical, where
io-wq used to potentially trigger a sleep on exit. As the io-wq thread
is exiting, it should not participate any further accounting. But these
days we don't need to rely on current->flags anymore, so we can safely
remove the PF_IO_WORKER clearing.
Reported-by: Zorro Lang <zlang@redhat.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Link: https://lore.kernel.org/all/ZIZSPyzReZkGBEFy@dread.disaster.area/
Fixes: f9010dbd ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull btrfs fixes from David Sterba:
 "A  more fixes and regression fixes:

   - in subpage mode, fix crash when repairing metadata at the end of
     a stripe

   - properly enable async discard when remounting from read-only to
     read-write

   - scrub regression fixes:
      - respect read-only scrub when attempting to do a repair
      - fix reporting of found errors, the stats don't get properly
        accounted after a stripe repair"

* tag 'for-6.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: scrub: also report errors hit during the initial read
  btrfs: scrub: respect the read-only flag during repair
  btrfs: properly enable async discard when switching from RO->RW
  btrfs: subpage: fix a crash in metadata repair path

The current implementation of max_credits on the client does
not work because the CreditRequest logic for several commands
does not take max_credits into account.

Still, we can end up asking the server for more credits, depending
on the number of credits in flight. For this, we need to
limit the credits while parsing the responses too.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

iface_cmp used to simply do a memcmp of the two
provided struct sockaddrs. The comparison needs to do more
based on the address family. Similar logic was already
present in cifs_match_ipaddr. Doing something similar now.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The virtio driver for Linux guests will not set a link speed to its
paravirtualized NICs.  This will be seen as -1 in the ethernet layer, and
when some servers (e.g. samba) fetches it, it's converted to an unsigned
value (and multiplied by 1000 * 1000), so in client side we end up with:

1)      Speed: 4294967295000000 bps

in DebugData.

This patch introduces a helper that returns a speed string (in Mbps or
Gbps) if interface speed is valid (>= SPEED_10 and <= SPEED_800000), or
"Unknown" otherwise.

The reason to not change the value in iface->speed is because we don't
know the real speed of the HW backing the server NIC, so let's keep
considering these as the fastest NICs available.

Also print "Capabilities: None" when the interface doesn't support any.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Output of /proc/fs/cifs/DebugData shows only the per-connection
counter for the number of credits of regular type. i.e. the
credits reserved for echo and oplocks are not displayed.

There have been situations recently where having this info
would have been useful. This change prints the credit counters
of all three types: regular, echo, oplocks.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The ordering of status checks at the beginning of
cifs_tree_connect is wrong. As a result, a tcon
which is good may stay marked as needing reconnect
infinitely.

Fixes: 2f0e4f03 ("cifs: check only tcon status on tcon related functions")
Cc: stable@vger.kernel.org # 6.3
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Because do_gettimeofday has been removed and replaced by ktime_get_real_ts64,
So just remove the comment as it's not needed now.
Signed-off-by: 鑫华 <jixianghua@xfusion.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull x86 fix from Borislav Petkov:

 - Set up the kernel CS earlier in the boot process in case EFI boots
   the kernel after bypassing the decompressor and the CS descriptor
   used ends up being the EFI one which is not mapped in the identity
   page table, leading to early SEV/SNP guest communication exceptions
   resulting in the guest crashing

* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed