- 19 Sep, 2022 22 commits
-
-
Dmytro Laktyushkin authored
[Why & How] Correctly set ddr5 channel width to 8 bytes Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Wayne Lin <wayne.lin@amd.com> Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Leo Li authored
[Why] DC makes use of layer_index (zpos) when picking the HW plane to enable HW cursor on. However, some compositors will not attach zpos information to each DRM plane. Consequently, in amdgpu, we default layer_index to 0 and do not update it. This causes said DC logic to enable HW cursor on all planes of the same layer_index, which manifests as a double cursor issue if one of the planes is scaled (and hence scaling the cursor as well). [How] Use DRM core helpers to calculate a normalized_zpos value for each drm_plane_state under each crtc, within the atomic state. This helper will first consider existing zpos values, and if identical/unset, fallback to plane ID ordering. The normalized_zpos is then passed to dc_plane_info during atomic check for later use by the cursor logic. Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Tested-by:
-
Alvin Lee authored
[Why and How] - Only consider pixel rate div policy for DCN32+ Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Tested-by:
-
Leo Chen authored
[Why & How] Added logs for panel delays, spread_spectrum_percentage, and gpuclk_ss_percentage to facilitate debugging. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Leo Chen <sancchen@amd.com> Tested-by:
-
Charlene Liu authored
[Why & How] Support dramclk change latency change via debug option and add some code isolation. Reviewed-by:
-
Alvin Lee authored
[Why & How] - Pipe split prediction previously only took into account MPC split. We must also consider when ODM combine is required, and when we apply ODM combine by policy. - Also re-work DET allocation function as it wasn't properly splitting the DET per stream, per plane. Reviewed-by:
-
Aurabindo Pillai authored
[Why&How] After reg offset initialization was switched to runtime rather than compile time, some of the defintions are not needed anymore and can be removed. Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by:
-
Chris Park authored
[Why] 420 modes are limited by FMT buffer width of 4096 which requires multi-pipe support in form of ODM combine. If 420 modes have greater HActive than 4096, the DML logic should accomodate whether it should be rejected, or ODM combine 2:1 or 4:1 is triggered accordingly. [How] FMT Buffer limit of 4096 in DCN32. Force ODM combine depending on HActive and FMT Buffer limit. Reject modes if TMDS 420 and above 4096. Acked-by:
Chris Park <chris.park@amd.com> Tested-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2182Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2181Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2180Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2179Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2178Reported-by:
-
Yang Li authored
clean up some inconsistent indentings Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2177Reported-by:
-
Colin Ian King authored
There is a spelling mistake in a pr_debug message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Hawking Zhang authored
amdgpu_firmware_info debugfs will show rlcv/rlcp ucode version info Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Hawking Zhang authored
To support query rlcp and rlcv firmware version from existing AMDGPU_INFO_FW_VERSION interface Signed-off-by:
-
Hawking Zhang authored
add rlc v2_x support to print_rlc_hdr helper Signed-off-by:
-
Hawking Zhang authored
cache rlcv/rlcvp ucode version info in amdgpu_gfx structure Signed-off-by:
-
Shiwu Zhang authored
To remove duplication for GFX11 as well, use the common MQD manager functions defined in kfd_mqd_manager.c for all version of managers Signed-off-by:
Shiwu Zhang <shiwu.zhang@amd.com> Acked-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
Mukul Joshi <mukul.joshi@amd.com> Signed-off-by:
-
Mukul Joshi authored
This patch updates the PTE flags when translate further (TF) is enabled: - With translate_further enabled, invalid PTEs can be 0. Reading consecutive invalid PTEs as 0 is considered a fault. To prevent this, ensure invalid PTEs have at least 1 bit set. - The current invalid PTE flags settings to translate a retry fault into a no-retry fault, doesn't work with TF enabled. As a result, update invalid PTE flags settings which works for both TF enabled and disabled case. Fixes: 352e683b ("drm/amdgpu: Enable translate_further to extend UTCL2 reach") Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Philip Yang authored
SDMA update page table may be called from unlocked context, this generate below warning. Use unlocked iterator to handle this case. WARNING: CPU: 0 PID: 1475 at drivers/dma-buf/dma-resv.c:483 dma_resv_iter_next Call Trace: dma_resv_iter_first+0x43/0xa0 amdgpu_vm_sdma_update+0x69/0x2d0 [amdgpu] amdgpu_vm_ptes_update+0x29c/0x870 [amdgpu] amdgpu_vm_update_range+0x2f6/0x6c0 [amdgpu] svm_range_unmap_from_gpus+0x115/0x300 [amdgpu] svm_range_cpu_invalidate_pagetables+0x510/0x5e0 [amdgpu] __mmu_notifier_invalidate_range_start+0x1d3/0x230 unmap_vmas+0x140/0x150 unmap_region+0xa8/0x110 Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Suggested-by:
-
- 14 Sep, 2022 13 commits
-
-
Yihao Han authored
./drivers/gpu/drm/amd/display/dc/dcn32/dcn32_mpc.c:729:63-68: WARNING: conversion to bool not needed here Generated by: scripts/coccinelle/misc/boolconv.cocci Signed-off-by:
Yihao Han <hanyihao@vivo.com> Signed-off-by:
-
Jiapeng Chong authored
drm/amd/display: make optc32_phantom_crtc_post_enable, optc32_setup_manual_trigger and optc32_set_drr static These three functions are not used outside the function dcn32_optc.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:159:6: warning: no previous prototype for function 'optc32_phantom_crtc_post_enable'. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:218:6: warning: no previous prototype for ‘optc32_set_drr’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_optc.c:193:6: warning: no previous prototype for ‘optc32_setup_manual_trigger’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2140Reported-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn32_dccg.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:257:6: warning: no previous prototype for ‘dccg32_otg_drop_pixel’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:248:6: warning: no previous prototype for ‘dccg32_otg_add_pixel’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:211:6: warning: no previous prototype for ‘dccg32_set_dpstreamclk’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dccg.c:136:6: warning: no previous prototype for ‘dccg32_set_dtbclk_dto’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2142Reported-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn32_hubbub.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:912:6: warning: no previous prototype for ‘hubbub32_force_wm_propagate_to_pipes’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:823:6: warning: no previous prototype for ‘hubbub32_wm_read_state’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:772:6: warning: no previous prototype for ‘hubbub32_init_watermarks’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_hubbub.c:712:6: warning: no previous prototype for ‘hubbub32_force_usr_retraining_allow’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2141Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn32_mmhubbub.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:103:6: warning: no previous prototype for ‘mmhubbub32_config_mcif_buf’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2145Reported-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn32_hubbub.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:223:6: warning: no previous prototype for ‘dccg314_set_valid_pixel_rate’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:184:6: warning: no previous prototype for ‘dccg314_set_dpstreamclk’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dccg.c:140:6: warning: no previous prototype for ‘dccg314_set_dtbclk_dto’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2144Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn314_optc.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_optc.c:153:6: warning: no previous prototype for ‘optc314_phantom_crtc_post_enable’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2147Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn314_dio_stream_encoder.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn314/dcn314_dio_stream_encoder.c:84:6: warning: no previous prototype for ‘enc314_stream_encoder_dvi_set_stream_attribute’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2146Reported-by:
-
Jiapeng Chong authored
These functions are not used outside the file dcn30_resource.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1949:6: warning: no previous prototype for ‘is_refresh_rate_support_mclk_switch_using_fw_based_vblank_stretch’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_resource.c:1919:5: warning: no previous prototype for ‘get_frame_rate_at_max_stretch_100hz’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2143Reported-by:
-
Alex Deucher authored
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
Alex Deucher authored
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by:
-
Li Ma authored
Add new gpu_metrics_v2_3 to acquire average temperature info from SMU metrics. To acquire average temp info from gpu_metrics interface, but gpu_metrics_v2_2 only has members to show current temp info. --- v1: Only add average_temperature_gfx in gpu_metrics_v2_3. v2: Add average temp members for soc, core and l3 in gpu_metrics_v2_3 and put these new members at the end of gpu_metrics_v2_3. Add operation to read average temp info from metrics table. v3: Merge v1 and v2 and rename the patch. v4: Merge v3. Add firmware version judgment in vangogh_common_get_gpu_metrics to maintain backward compatibility and rename the patch. "return ret" on error scenario in smu_cmn_get_smc_version. Signed-off-by:
Li Ma <li.ma@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
- 13 Sep, 2022 5 commits
-
-
Xu Panda authored
soc15_common.h is included more than once. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Xu Panda <xu.panda@zte.com.cn> Signed-off-by:
-
Jiapeng Chong authored
The function copy_stream_update_to_stream() is defined in the notif.c file, but not called elsewhere, so delete this unused function. drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:2852:6: warning: no previous prototype for ‘dc_reset_state’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2113Reported-by:
-
Jiapeng Chong authored
These two functions are not used outside the function dcn32_mpc.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:704:6: warning: no previous prototype for ‘mpc32_program_shaper’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:900:6: warning: no previous prototype for ‘mpc32_program_3dlut’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2115Reported-by:
-
Jiapeng Chong authored
drm/amd/display: make dcn32_link_encoder_is_in_alt_mode and dcn32_link_encoder_get_max_link_cap static These two functions are not used outside the function dcn32_dio_link_encoder.c, so the modification is defined as static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_link_encoder.c:121:6: warning: no previous prototype for ‘dcn32_link_encoder_is_in_alt_mode’. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dio_link_encoder.c:136:6: warning: no previous prototype for ‘dcn32_link_encoder_get_max_link_cap’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2117Reported-by:
-
Jiapeng Chong authored
This symbol is not used outside of dcn32_dpp.c, so marks it static. drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_dpp.c:34:6: warning: no previous prototype for ‘dscl32_calc_lb_num_partitions’. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2118Reported-by:
-
