- 09 Feb, 2024 2 commits
-
-
Li RongQing authored
virtqueue_enable_cb() will call virtqueue_poll() which will check if queue is broken at beginning, so remove the virtqueue_is_broken() call Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
Li RongQing <lirongqing@baidu.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Quanyang Wang authored
When calling crypto_finalize_request, BH should be disabled to avoid triggering the following calltrace: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 74 at crypto/crypto_engine.c:58 crypto_finalize_request+0xa0/0x118 Modules linked in: cryptodev(O) CPU: 2 PID: 74 Comm: firmware:zynqmp Tainted: G O 6.8.0-rc1-yocto-standard #323 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : crypto_finalize_request+0xa0/0x118 lr : crypto_finalize_request+0x104/0x118 sp : ffffffc085353ce0 x29: ffffffc085353ce0 x28: 0000000000000000 x27: ffffff8808ea8688 x26: ffffffc081715038 x25: 0000000000000000 x24: ffffff880100db00 x23: ffffff880100da80 x22: 0000000000000000 x21: 0000000000000000 x20: ffffff8805b14000 x19: ffffff880100da80 x18: 0000000000010450 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: ffffff880100dad0 x11: 0000000000000000 x10: ffffffc0832dcd08 x9 : ffffffc0812416d8 x8 : 00000000000001f4 x7 : ffffffc0830d2830 x6 : 0000000000000001 x5 : ffffffc082091000 x4 : ffffffc082091658 x3 : 0000000000000000 x2 : ffffffc7f9653000 x1 : 0000000000000000 x0 : ffffff8802d20000 Call trace: crypto_finalize_request+0xa0/0x118 crypto_finalize_aead_request+0x18/0x30 zynqmp_handle_aes_req+0xcc/0x388 crypto_pump_work+0x168/0x2d8 kthread_worker_fn+0xfc/0x3a0 kthread+0x118/0x138 ret_from_fork+0x10/0x20 irq event stamp: 40 hardirqs last enabled at (39): [<ffffffc0812416f8>] _raw_spin_unlock_irqrestore+0x70/0xb0 hardirqs last disabled at (40): [<ffffffc08122d208>] el1_dbg+0x28/0x90 softirqs last enabled at (36): [<ffffffc080017dec>] kernel_neon_begin+0x8c/0xf0 softirqs last disabled at (34): [<ffffffc080017dc0>] kernel_neon_begin+0x60/0xf0 ---[ end trace 0000000000000000 ]--- Fixes: 4d96f7d4 ("crypto: xilinx - Add Xilinx AES driver") Signed-off-by:Quanyang Wang <quanyang.wang@windriver.com> Signed-off-by:
-
- 02 Feb, 2024 5 commits
-
-
Eric Biggers authored
Since crypto_hash_alg_has_setkey() is only called from ahash.c itself, make it a static function. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Wenkai Lin authored
Unused parameter of static functions should be removed. Signed-off-by:
Wenkai Lin <linwenkai6@hisilicon.com> Signed-off-by:
-
Qi Tao authored
This patch fixes following cleanup issues: - The return value of the function is inconsistent with the actual return type. - After the pointer type is directly converted to the `__le64` type, the program may crash or produce unexpected results. Signed-off-by:
Qi Tao <taoqi10@huawei.com> Signed-off-by:
-
Qi Tao authored
Nested macros are integrated into a single macro, making the code simpler. Signed-off-by:
-
Qi Tao authored
As the sec DFX function is enhanced, some RAS registers are added to the original DFX registers to enhance the DFX positioning function. Signed-off-by:
-
- 26 Jan, 2024 26 commits
-
-
David Wronek authored
Document the compatible used for the inline crypto engine found on SC7180. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
David Wronek <davidwronek@gmail.com> Signed-off-by:
-
Joachim Vandersmissen authored
Commit a93492ca ("crypto: ccree - remove data unit size support") removed support for the xts512 and xts4096 algorithms, but left them defined in testmgr.c. This patch removes those definitions. Signed-off-by:
Joachim Vandersmissen <git@jvdsn.com> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
-
Erick Archer authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc_node() function instead of the argument count * size in the kzalloc_node() function. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/162Signed-off-by:
Erick Archer <erick.archer@gmx.com> Reviewed-by:
Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
-
Erick Archer authored
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the purpose specific kcalloc() function instead of the argument size * count in the kzalloc() function. Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1] Link: https://github.com/KSPP/linux/issues/162Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
Wenkai Lin authored
Switch to raw_smp_processor_id() to prevent a number of warnings from kernel debugging. We do not care about preemption here, as the CPU number is only used as a poor mans load balancing or device selection. If preemption happens during an encrypt/decrypt operation a small performance hit will occur but everything will continue to work, so just ignore it. This commit is similar to e7a9b05c ("crypto: cavium - Fix smp_processor_id() warnings"). [ 7538.874350] BUG: using smp_processor_id() in preemptible [00000000] code: af_alg06/8438 [ 7538.874368] caller is debug_smp_processor_id+0x1c/0x28 [ 7538.874373] CPU: 50 PID: 8438 Comm: af_alg06 Kdump: loaded Not tainted 5.10.0.pc+ #18 [ 7538.874377] Call trace: [ 7538.874387] dump_backtrace+0x0/0x210 [ 7538.874389] show_stack+0x2c/0x38 [ 7538.874392] dump_stack+0x110/0x164 [ 7538.874394] check_preemption_disabled+0xf4/0x108 [ 7538.874396] debug_smp_processor_id+0x1c/0x28 [ 7538.874406] sec_create_qps+0x24/0xe8 [hisi_sec2] [ 7538.874408] sec_ctx_base_init+0x20/0x4d8 [hisi_sec2] [ 7538.874411] sec_aead_ctx_init+0x68/0x180 [hisi_sec2] [ 7538.874413] sec_aead_sha256_ctx_init+0x28/0x38 [hisi_sec2] [ 7538.874421] crypto_aead_init_tfm+0x54/0x68 [ 7538.874423] crypto_create_tfm_node+0x6c/0x110 [ 7538.874424] crypto_alloc_tfm_node+0x74/0x288 [ 7538.874426] crypto_alloc_aead+0x40/0x50 [ 7538.874431] aead_bind+0x50/0xd0 [ 7538.874433] alg_bind+0x94/0x148 [ 7538.874439] __sys_bind+0x98/0x118 [ 7538.874441] __arm64_sys_bind+0x28/0x38 [ 7538.874445] do_el0_svc+0x88/0x258 [ 7538.874447] el0_svc+0x1c/0x28 [ 7538.874449] el0_sync_handler+0x8c/0xb8 [ 7538.874452] el0_sync+0x148/0x180 Signed-off-by:
-
Ard Biesheuvel authored
The C glue code already infers whether or not the current iteration is the final one, by comparing walk.nbytes with walk.total. This means we can easily inform the asm helpers of this as well, by conditionally passing a pointer to the original IV, which is used in the finalization of the MAC. This removes the need for a separate call into the asm code to perform the finalization. Signed-off-by:
-
Ard Biesheuvel authored
The encryption and decryption code paths are mostly identical, except for a small difference where the plaintext input into the MAC is taken from either the input or the output block. We can factor this in quite easily using a vector bit select, and a few additional XORs, without the need for branches. This way, we can use the same tail handling logic on the encrypt and decrypt code paths, allowing further consolidation of the asm helpers in a subsequent patch. (In the main loop, adding just a handful of ALU instructions results in a noticeable performance hit [around 5% on Apple M2], so those routines are kept separate) Signed-off-by:
-
Ard Biesheuvel authored
The CCM code as originally written attempted to use as few NEON registers as possible, to avoid having to eagerly preserve/restore the entire NEON register file at every call to kernel_neon_begin/end. At that time, this API took a number of NEON registers as a parameter, and only preserved that many registers. Today, the NEON register file is restored lazily, and the old API is long gone. This means we can use as many NEON registers as we can make meaningful use of, which means in the AES case that we can keep all round keys in registers rather than reloading each of them for each AES block processed. On Cortex-A53, this results in a speedup of more than 50%. (From 4 cycles per byte to 2.6 cycles per byte) Signed-off-by:
-
Ard Biesheuvel authored
CCM combines the counter (CTR) encryption mode with a MAC based on the same block cipher. This MAC construction is a bit clunky: it invokes the block cipher in a way that cannot be parallelized, resulting in poor CPU pipeline efficiency. The arm64 CCM code mitigates this by interleaving the encryption and MAC at the AES round level, resulting in a substantial speedup. But this approach does not apply to the additional authenticated data (AAD) which is not encrypted. This means the special asm routine dealing with the AAD is not any better than the MAC update routine used by the arm64 AES block encryption driver, so let's reuse that, and drop the special AES-CCM version. Signed-off-by:
-
Ard Biesheuvel authored
Implement the CCM tail handling using a single sequence that uses permute vectors and overlapping loads and stores, rather than going over the tail byte by byte in a loop, and using scalar operations. This is more efficient, even though the measured speedup is only around 1-2% on the CPUs I have tried. Signed-off-by:
-
Ard Biesheuvel authored
In preparation for optimizing the CCM core asm code using permutation vectors and overlapping loads and stores, ensure that inputs shorter than the size of a AES block are passed via a buffer on the stack, in a way that positions the data at the end of a 16 byte buffer. This removes the need for the asm code to reason about a rare corner case where the tail of the data cannot be read/written using a single NEON load/store instruction. While at it, tweak the copyright header and authorship to bring it up to date. Signed-off-by:
-
Ard Biesheuvel authored
Now that kernel mode NEON no longer disables preemption, we no longer have to take care to disable and re-enable use of the NEON when calling into the skcipher walk API. So just keep it enabled until done. Signed-off-by:
-
Ard Biesheuvel authored
This reverts commit 57ead1bf, which updated the CCM code to only rely on walk.nbytes to check for failures returned from the skcipher walk API, mostly for the common good rather than to fix a particular problem in the code. This change introduces a problem of its own: the skcipher walk is started with the 'atomic' argument set to false, which means that the skcipher walk API is permitted to sleep. Subsequently, it invokes skcipher_walk_done() with preemption disabled on the final iteration of the loop. This appears to work by accident, but it is arguably a bad example, and providing a better example was the point of the original patch. Given that future changes to the CCM code will rely on the original behavior of entering the loop even for zero sized inputs, let's just revert this change entirely, and proceed from there. Signed-off-by:
-
Colin Ian King authored
The pointer secs is being assigned a value however secs is never read afterwards. The pointer secs is redundant and can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'secs' is used in the enclosing expression, the value is never actually read from 'secs' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by:
-
Colin Ian King authored
The assignment to nbytes is redundant, the while loop needs to just refer to the value in walk.nbytes and the value of nbytes is being re-assigned inside the loop on both paths of the following if-statement. Remove redundant assignment. Cleans up clang scan build warning: warning: Although the value stored to 'nbytes' is used in the enclosing expression, the value is never actually read from 'nbytes' [deadcode.DeadStores] Signed-off-by:
-
Weili Qian authored
Read the values of some device registers before the device is reset, these values help analyze the cause of the device exception. Signed-off-by:
Weili Qian <qianweili@huawei.com> Signed-off-by:
-
Weili Qian authored
Support get device current state. The value 0 indicates that the device is busy, and the value 1 indicates that the device is idle. When the device is in suspended, 1 is returned. Signed-off-by:
-
Minjie Du authored
This patch removes the debugfs_create_dir() error checking in iaa_crypto_debugfs_init(). Because the debugfs_create_dir() is developed in a way that the caller can safely handle the errors that occur during the creation of DebugFS nodes. Signed-off-by:
Minjie Du <duminjie@vivo.com> Acked-by:
Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by:
-
Tom Zanussi authored
The header table and related code is currently unused - it was included and used for canned mode, but canned mode has been removed, so this code can be safely removed as well. This indirectly fixes a bug reported by Dan Carpenter. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/linux-crypto/b2e0bd974981291e16882686a2b9b1db3986abe4.camel@linux.intel.com/T/#m4403253d6a4347a925fab4fc1cdb4ef7c095fb86Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Signed-off-by:
-
Clay Chang authored
This patch includes linux/errno.h to address the issue of 'EINVAL' being undeclared. Signed-off-by:
Clay Chang <clayc@hpe.com> Signed-off-by:
-
Luca Weiss authored
Add a compatible for the crypto block found on the SM6350 SoC. Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
The use of array_size() leads gcc to assume the memcpy() can have a larger limit than actually possible, which triggers a string fortification warning: In file included from include/linux/string.h:296, from include/linux/bitmap.h:12, from include/linux/cpumask.h:12, from include/linux/sched.h:16, from include/linux/delay.h:23, from include/linux/iopoll.h:12, from drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:3: In function 'fortify_memcpy_chk', inlined from 'adf_gen4_init_thd2arb_map' at drivers/crypto/intel/qat/qat_common/adf_gen4_hw_data.c:401:3: include/linux/fortify-string.h:579:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 579 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/fortify-string.h:588:4: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning] 588 | __read_overflow2_field(q_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Add an explicit range check to avoid this. Fixes: 5da6a2d5 ("crypto: qat - generate dynamically arbiter mappings") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Danny Tsen authored
Relocate all crypto files in vmx driver to arch/powerpc/crypto directory and remove vmx directory. drivers/crypto/vmx/aes.c rename to arch/powerpc/crypto/aes.c drivers/crypto/vmx/aes_cbc.c rename to arch/powerpc/crypto/aes_cbc.c drivers/crypto/vmx/aes_ctr.c rename to arch/powerpc/crypto/aes_ctr.c drivers/crypto/vmx/aes_xts.c rename to arch/powerpc/crypto/aes_xts.c drivers/crypto/vmx/aesp8-ppc.h rename to arch/powerpc/crypto/aesp8-ppc.h drivers/crypto/vmx/aesp8-ppc.pl rename to arch/powerpc/crypto/aesp8-ppc.pl drivers/crypto/vmx/ghash.c rename to arch/powerpc/crypto/ghash.c drivers/crypto/vmx/ghashp8-ppc.pl rename to arch/powerpc/crypto/ghashp8-ppc.pl drivers/crypto/vmx/vmx.c rename to arch/powerpc/crypto/vmx.c deleted files: drivers/crypto/vmx/Makefile drivers/crypto/vmx/Kconfig drivers/crypto/vmx/ppc-xlate.pl This patch has been tested has passed the selftest. The patch is also tested with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS enabled. Signed-off-by:
Danny Tsen <dtsen@linux.ibm.com> Signed-off-by:
-
Markus Elfring authored
The kfree() function was called in up to two cases by the __virtio_crypto_akcipher_do_req() function during error handling even if the passed variable contained a null pointer. This issue was detected by using the Coccinelle software. * Adjust jump targets. * Delete two initialisations which became unnecessary with this refactoring. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Gonglei <arei.gonglei@huawei.com> Reviewed-by:
Justin Stitt <justinstitt@google.com> Signed-off-by:
-
Gaurav Jain authored
ahash_alg->setkey is updated to ahash_nosetkey in ahash.c so checking setkey() function to determine hmac algorithm is not valid. to fix this added is_hmac variable in structure caam_hash_alg to determine whether the algorithm is hmac or not. Fixes: 2f1f34c1 ("crypto: ahash - optimize performance when wrapping shash") Signed-off-by:
Gaurav Jain <gaurav.jain@nxp.com> Reviewed-by:
-
Damian Muszynski authored
The commit "crypto: qat - generate dynamically arbiter mappings" introduced a regression on qat_402xx devices. This is reported when the driver probes the device, as indicated by the following error messages: 4xxx 0000:0b:00.0: enabling device (0140 -> 0142) 4xxx 0000:0b:00.0: Generate of the thread to arbiter map failed 4xxx 0000:0b:00.0: Direct firmware load for qat_402xx_mmp.bin failed with error -2 The root cause of this issue was the omission of a necessary function pointer required by the mapping algorithm during the implementation. Fix it by adding the missing function pointer. Fixes: 5da6a2d5 ("crypto: qat - generate dynamically arbiter mappings") Signed-off-by:
Damian Muszynski <damian.muszynski@intel.com> Reviewed-by:
-
- 21 Jan, 2024 7 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by:
-
