The flags parameter got removed in a previous commit, but some
references were overlooked.
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

Coding style cleanups:

- change __inline__ to inline;
- drop space in "* addr" parameters;
- drop space between func. name and '('

The "volatile" keywords are correct according to email from one
Linus Torvalds.

[Several other arches need some of this also.]
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use duplicated inline functions for test_and_set_bit_lock() on x86
instead of #define macros, thus avoiding a bad example.  This allows
kernel-doc to run cleanly instead of terminating with an error:

Error(linux-2.6.24-rc1//include/asm-x86/bitops_32.h:188): cannot understand prototype: 'test_and_set_bit_lock test_and_set_bit '
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (40 commits)
  USB: open disconnect race in usblcd
  USB: disconnect open race in legousbtower
  USB: open disconnect race in iowarrior
  USB: missing error check in emi62
  USB: missing error check in emi26
  USB: usb_serial_resume bug fix
  USB: remove new OHCI build warnings
  USB: amd5536udc - remove set_mwi() compiler warning
  USB: usbserial - fix potential deadlock between write() and IRQ
  usb: serial/pl2303: support for IO Data Device RSAQ5
  USB: fix read vs. disconnect race in cytherm driver
  USB: fix locking in idmouse
  USB: fix interface sysfs file-creation bug
  USB: fix ssb_ohci_probe() build bug
  USB: pl2303: remove can't happen checks, set speed properly and report baud rate
  USB: mos7840: Clean up old checks and stuff
  USB rio500.c: fix check-after-use
  USB iowarrior.c: fix check-after-use
  USB: add URB_FREE_BUFFER to permissible flags
  USB: isd200: sort out USB/IDE dependancy mess
  ...

* 'warnings-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6:
  ISDN/sc: fix longstanding warning

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: pass correct addr in get_fb_unmapped_area(MAP_FIXED)

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV4]: Explicitly call fib_get_table() in fib_frontend.c
  [NET]: Use BUILD_BUG_ON in net/core/flowi.c
  [NET]: Remove in-code externs for some functions from net/core/dev.c
  [NET]: Don't declare extern variables in net/core/sysctl_net_core.c
  [TCP]: Remove unneeded implicit type cast when calling tcp_minshall_update()
  [NET]: Treat the sign of the result of skb_headroom() consistently
  [9P]: Fix missing unlock before return in p9_mux_poll_start
  [PKT_SCHED]: Fix sch_prio.c build with CONFIG_NETDEVICES_MULTIQUEUE
  [IPV4] ip_gre: sendto/recvfrom NBMA address
  [SCTP]: Consolidate sctp_ulpq_renege_xxx functions
  [NETLINK]: Fix ACK processing after netlink_dump_start
  [VLAN]: MAINTAINERS update
  [DCCP]: Implement SIOCINQ/FIONREAD
  [NET]: Validate device addr prior to interface-up

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
  x86: fix bogus KERN_ALERT on oops
  x86: lguest build fix
  x86: fix CONFIG_KEXEC build breakage

* 'sg' of git://git.kernel.dk/linux-2.6-block:
  fix sg_phys to use dma_addr_t
  ub: add sg_init_table for sense and read capacity commands
  x86: pci-gart fix
  blackfin: fix sg fallout
  xtensa: dma-mapping.h is using linux/scatterlist.h functions, so include it
  SG: audit of drivers that use blk_rq_map_sg()
  arch/um/drivers/ubd_kern.c: fix a building error
  SG: Change sg_set_page() to take length and offset argument
  AVR32: Fix sg_page breakage
  mmc: sg fallout
  m68k: sg fallout
  More SG build fixes
  sg: add missing sg_init_table calls to zfcp
  SG build fix

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-lguest:
  lguest: documentation update
  lguest: Add to maintainers file.
  lguest: build fix
  lguest: clean up lguest_launcher.h
  lguest: remove unused "wake" element from struct lguest
  lguest: use defines from x86 headers instead of magic numbers
  lguest: example launcher header cleanup.

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] sata_nv: SWNCQ should not apply to MCP61
  libata-core: Be a bit more relaxed about early DMA zero devices
  ahci: ahci: implement workaround for ASUS P5W-DH Deluxe ahci_broken_hardreset(), take #2
  Fix pata_icside build for recent libata API changes
  libata: cosmetic clean up in ata_eh_reset()
  libata-core.c: make 2 functions static
  [libata] Create internal helper ata_dev_set_feature()

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  [netdrvr] forcedeth: add MCP77 device IDs
  rndis_host: reduce MTU instead of refusing to talk to devices with low max packet size
  cpmac: update to new fixed phy driver interface
  cpmac: convert to napi_struct interface
  cpmac: use print_mac() instead of MAC_FMT
  natsemi: fix oops, link back netdevice from private-struct
  ehea: fix port_napi_disable/enable
  bonding/bond_main.c: fix cut'n'paste error
  make bonding/bond_main.c:bond_deinit() static
  drivers/net/ipg.c: cleanups
  remove Documentation/networking/net-modules.txt

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  sched: mark CONFIG_FAIR_GROUP_SCHED as !EXPERIMENTAL
  sched: isolate SMP balancing code a bit more
  sched: reduce balance-tasks overhead
  sched: make cpu_shares_{show,store}() static
  sched: clean up some control group code
  sched: constify sched.h
  sched: document profile=sleep requiring CONFIG_SCHEDSTATS
  sched: use show_regs() to improve __schedule_bug() output
  sched: clean up sched_domain_debug()
  sched: fix fastcall mismatch in completion APIs
  sched: fix sched_domain sysctl registration again

This patch fixes the c_entry_count counter of the mbcache. Currently
it increments the counter first & allocate the cache entry later. In
case of failure to allocate the entry due to insufficient memory this
counter is still left incremented. This patch fixes this anomaly.
Signed-off-by: Ram Gupta <ram.gupta5@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix pointer mismatches in proc_sysctl.c.  The proc_handler() method returns a
size_t through an arg pointer, but is given a pointer to a ssize_t to return
into.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The __deprecated marker is quite useful in highlighting the remnants of
old APIs that want removing.

However, it is quite normal for one or more years to pass, before the
(usually ancient, bitrotten) code in question is either updated or
deleted.

Thus, like __must_check, add a Kconfig option that permits the silencing
of this compiler warning.

This change mimics the ifdef-ery and Kconfig defaults of MUST_CHECK as
closely as possible.
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes some totally illogical and wrong code that converts things to
and from BCD mode essentially randomly, does math on values in BCD mode
etc etc.  Introduce a few helper functions to make it a bit more obvious
what is going on, and make sure that we always do all the arithmetic
(and anythign else, for that matter) in binary, not BCD.

Tested by Mark Lord, who found the problem originally, and also pushed
the patch back and reminded me about it.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

this driver has a possible use after free due to a race when disconnect
and open handle intfdata without a lock.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

again, possible use after free due to touching intfdata without lock.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

the driver sets intfdata to NULL without lock. Data structures can be
freed and accessed.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

the emi62 also lacks an error check.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this drivers lacks an error check.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Avoid potential null pointer dereference.
Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Remove various newly-introduced compiler warnings for OHCI.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Get rid of pointless pci_set_mwi() compiler warning.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

USB: usbserial - fix potential deadlock between write() and IRQ

usb_serial_generic_write() doesn't disable interrupts when taking port->lock,
and could therefore deadlock with usb_serial_generic_read_bulk_callback()
being called from interrupt, taking the same lock. Fix it.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Larry Finger <larry.finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch adds support for the IO Data Device USB-RSAQ5, PL2303 based
USB-serial converter, to pl2303 driver
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

the disconnect method of this driver set intfdata to NULL before
removing attribute files. The attributes' read methods will happily
follow the NULL pointer. Here's the correct ordering.

Signed-off-by : Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Pete caused me to lock at buggy drivers in this respect. The idmouse has
a race between open and disconnect. This patch

- solves the open/disconnect race
- switches locking to mutexes
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1005) fixes a rather subtle problem.  When
usb_set_configuration() registers the interfaces and their files in
sysfs, it doesn't expect those files to exist already.  But when an
interface is registered, its driver may call usb_set_interface() and
thereby cause the sysfs files to be created.  The result is an error
when usb_set_configuration() goes on to create those same files again.

The (not-so-great) solution is to have usb_set_configuration() remove
any existing files before creating them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

fix ssb_ohci_probe() build bug:

 drivers/built-in.o: In function `ssb_ohci_probe':
 ohci-hcd.c:(.text+0xbff39): undefined reference to `ssb_device_enable'
 ohci-hcd.c:(.text+0xbff6f): undefined reference to `ssb_admatch_base'
 ohci-hcd.c:(.text+0xbff8b): undefined reference to `ssb_admatch_size'
 ohci-hcd.c:(.text+0xbffe5): undefined reference to `ssb_device_disable'
 [...]

the reason was that this Kconfig combination was allowed:

 CONFIG_SSB=m
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_OHCI_HCD_SSB=y

the fix is to require a modular USB_OHCI_HCD build when SSB is modular.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Coverity checker spotted that we have already oops'ed if "dev"
was NULL in these places.

Since "dev" being NULL isn't possible at these places this patch removes
the NULL checks.

Additionally, I've fixed the formatting of the if's.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The Coverity checker spotted that we have already oops'ed if "dev"
was NULL.

Since "dev" being NULL doesn't seem to be possible here this patch 
removes the NULL check.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

URB_FREE_BUFFER needs to be allowed in the sanity checks to use drivers that
use that flag.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The ISD200 driver imports a single trivial routine from the IDE layer and
in doing so creates a mess of dependancies that drag in the entire old
IDE layer. Even more sad - it does this for a routine which is usually
(little endian) a null function!

- Copy the function into ISD200
- Rename it so it doesn't clash with the ide header prototype
- Remove all the depend constraints
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

FTDI Elan driver: Convert the semaphore ftdi->u132_lock to the mutex
API
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as1003) changes uhci-hcd to treat the URB_ISO_ASAP flag
the same as other host controller drivers, namely, to schedule an Iso
URB for the first available time slot that hasn't already expired.
URBs in which the flag isn't set will be scheduled for the first slot
following the last URB, even if it has expired.

This fixes a problem reported by Martin Bachem.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>