- 09 Feb, 2022 2 commits
-
-
Sagi Grimberg authored
AER is not backed by a real request, hence we should not incorrectly assume that when failing to send a nvme command, it is a normal request but rather check if this is an aer and if so complete the aer (similar to the normal completion path). Cc: stable@vger.kernel.org Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Christoph Hellwig <hch@lst.de>
-
Bean Huo authored
Add NVMe request completion trace in nvme_complete_batch_req() because nvme:nvme_complete_req tracepoint is missing in case of request batched completion. Signed-off-by:
Bean Huo <beanhuo@micron.com> Signed-off-by:
-
- 04 Feb, 2022 1 commit
-
-
Martin K. Petersen authored
Commit 309a62fa ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks. The seed value should be advanced by bio_integrity_intervals() and not the number of sectors. Cc: Dmitry Monakhov <dmonakhov@openvz.org> Cc: stable@vger.kernel.org Fixes: 309a62fa ("bio-integrity: bio_integrity_advance must update integrity seed") Tested-by:
Dmitry Ivanov <dmitry.ivanov2@hpe.com> Reported-by:
Alexey Lyashkov <alexey.lyashkov@hpe.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220204034209.4193-1-martin.petersen@oracle.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 03 Feb, 2022 3 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.17 - fix a use-after-free in rdm and tcp controller reset (Sagi Grimberg) - fix the state check in nvmf_ctlr_matches_baseopts (Uday Shankar)" * tag 'nvme-5.17-2022-02-03' of git://git.infradead.org/nvme: nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts() nvme-rdma: fix possible use-after-free in transport error_recovery work nvme-tcp: fix possible use-after-free in transport error_recovery work nvme: fix a possible use-after-free in controller reset during load
-
https://git.kernel.org/pub/scm/linux/kernel/git/song/mdJens Axboe authored
Pull MD fix from Song: "Please consider pulling the following fix on top of your block-5.17 branch. It fixes a NULL ptr deref case with nowait." * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix NULL pointer deref with nowait but no mddev->queue
-
Uday Shankar authored
Controller deletion/reset, immediately followed by or concurrent with a reconnect, is hard failing the connect attempt resulting in a complete loss of connectivity to the controller. In the connect request, fabrics looks for an existing controller with the same address components and aborts the connect if a controller already exists and the duplicate connect option isn't set. The match routine filters out controllers that are dead or dying, so they don't interfere with the new connect request. When NVME_CTRL_DELETING_NOIO was added, it missed updating the state filters in the nvmf_ctlr_matches_baseopts() routine. Thus, when in this new state, it's seen as a live controller and fails the connect request. Correct by adding the DELETING_NIO state to the match checks. Fixes: ecca390e ("nvme: fix deadlock in disconnect during scan_work and/or ana_work") Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by:
Uday Shankar <ushankar@purestorage.com> Reviewed-by:
James Smart <jsmart2021@gmail.com> Reviewed-by:
-
- 02 Feb, 2022 5 commits
-
-
Song Liu authored
Leon reported NULL pointer deref with nowait support: [ 15.123761] device-mapper: raid: Loading target version 1.15.1 [ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 15.124192] device-mapper: raid: Choosing default region size of 4MiB [ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 15.129530] #PF: supervisor write access in kernel mode [ 15.129533] #PF: error_code(0x0002) - not-present page [ 15.129535] PGD 0 P4D 0 [ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e [ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021 [ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20 [ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \ 00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \ 31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202 [ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000 [ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d [ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000 [ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070 [ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001 [ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000 [ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0 [ 15.129580] Call Trace: [ 15.129582] <TASK> [ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531] [ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63] [ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129663] __x64_sys_ioctl+0x8e/0xd0 [ 15.129667] do_syscall_64+0x5c/0x90 [ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129675] ? do_syscall_64+0x69/0x90 [ 15.129677] ? do_syscall_64+0x69/0x90 [ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129682] ? do_syscall_64+0x69/0x90 [ 15.129684] ? do_syscall_64+0x69/0x90 [ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.129689] RIP: 0033:0x7fa96ecd559b [ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \ c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \ ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48 [ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b [ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27 [ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610 [ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530 [ 15.129709] </TASK> This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check. Fixes: f51d46d0 ("md: add support for REQ_NOWAIT") Reported-by:Leon Möller <jkhsjdhjs@totally.rip> Tested-by:
Song Liu <song@kernel.org>
-
Ilya Dryomov authored
Commit ceaa7625 ("block: move direct_IO into our own read_iter handler") introduced several regressions for bdev DIO: 1. read spanning EOF always returns 0 instead of the number of bytes read. This is because "count" is assigned early and isn't updated when the iterator is truncated: $ lsblk -o name,size /dev/vdb NAME SIZE vdb 1G $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 0/4194304 bytes at offset 1070596096 0.000000 bytes, 0 ops; 0.0007 sec (0.000000 bytes/sec and 0.0000 ops/sec) instead of $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 3145728/4194304 bytes at offset 1070596096 3 MiB, 1 ops; 0.0007 sec (3.865 GiB/sec and 1319.2612 ops/sec) 2. truncated iterator isn't reexpanded 3. iterator isn't reverted on blkdev_direct_IO() error 4. zero size read no longer skips atime update Fixes: ceaa7625 ("block: move direct_IO into our own read_iter handler") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
-
Sagi Grimberg authored
While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: -
Sagi Grimberg authored
While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
-
Sagi Grimberg authored
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by:
-
- 28 Jan, 2022 3 commits
-
-
Mike Snitzer authored
Record the start_time for a bio but defer the starting block core's IO accounting until after IO is submitted using bio_start_io_acct_time(). This approach avoids the need to mess around with any of the individual IO stats in response to a bio_split() that follows bio submission. Reported-by:
Bud Brown <bubrown@redhat.com> Reviewed-by:
Mike Snitzer <snitzer@redhat.com> Link: https://lore.kernel.org/r/20220128155841.39644-4-snitzer@redhat.comSigned-off-by:
-
Mike Snitzer authored
Reverts a1e1cb72 ("dm: fix redundant IO accounting for bios that need splitting") because it was too narrow in scope (only addressed redundant 'sectors[]' accounting and not ios, nsecs[], etc). Cc: stable@vger.kernel.org Signed-off-by:
-
Mike Snitzer authored
bio_start_io_acct_time() interface is like bio_start_io_acct() that allows start_time to be passed in. This gives drivers the ability to defer starting accounting until after IO is issued (but possibily not entirely due to bio splitting). Reviewed-by:
-
- 27 Jan, 2022 4 commits
-
-
Laibin Qiu authored
Commit 180dccb0 ("blk-mq: fix tag_get wait task can't be awakened") will recalculate wake_batch when incrementing or decrementing active_queues to avoid wake_batch > hctx_max_depth. At the same time, in order to not affect performance as much as possible, the minimum wakeup batch is set to 4. But when the QD is small (such as QD=1), if inc or dec active_queues increases wakeup batch, that can lead to a hang: Fix this problem with the following strategies: QD : >= 32 | < 32 --------------------------------- wakeup batch: 8~4 | 3~1 Fixes: 180dccb0 ("blk-mq: fix tag_get wait task can't be awakened") Link: https://lore.kernel.org/linux-block/78cafe94-a787-e006-8851-69906f0c2128@huawei.com/T/#tReported-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by:
Laibin Qiu <qiulaibin@huawei.com> Tested-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.17 - add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs (Wu Zheng) - remove the unneeded ret variable in nvmf_dev_show (Changcheng Deng)" * tag 'nvme-5.17-2022-01-27' of git://git.infradead.org/nvme: nvme-fabrics: remove the unneeded ret variable in nvmf_dev_show nvme-pci: add the IGNORE_DEV_SUBNQN quirk for Intel P4500/P4600 SSDs
-
Changcheng Deng authored
Remove unneeded variable and directly return 0. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by:
-
Wu Zheng authored
The Intel P4500/P4600 SSDs do not report a subsystem NQN despite claiming compliance to a standards version where reporting one is required. Add the IGNORE_DEV_SUBNQN quirk to not fail the initialization of a second such SSDs in a system. Signed-off-by:
Zheng Wu <wu.zheng@intel.com> Signed-off-by:
Ye Jinhe <jinhe.ye@intel.com> Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
- 26 Jan, 2022 1 commit
-
-
Yu Kuai authored
If blk_mq_request_issue_directly() failed from blk_insert_cloned_request(), the request will be accounted start. Currently, blk_insert_cloned_request() is only called by dm, and such request won't be accounted done by dm. In normal path, io will be accounted start from blk_mq_bio_to_request(), when the request is allocated, and such io will be accounted done from __blk_mq_end_request_acct() whether it succeeded or failed. Thus add blk_account_io_done() to fix the problem. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
- 23 Jan, 2022 11 commits
-
-
Miaoqian Lin authored
kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add() If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Fix this issue by adding kobject_put(). Callback function blk_ia_ranges_sysfs_release() in kobject_put() can handle the pointer "iars" properly. Fixes: a2247f19 ("block: Add independent access ranges support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220120101025.22411-1-linmq006@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - A series of bpf fixes, including an oops fix and some codegen fixes. - Fix a regression in syscall_get_arch() for compat processes. - Fix boot failure on some 32-bit systems with KASAN enabled. - A couple of other build/minor fixes. Thanks to Athira Rajeev, Christophe Leroy, Dmitry V. Levin, Jiri Olsa, Johan Almbladh, Maxime Bizon, Naveen N. Rao, and Nicholas Piggin. * tag 'powerpc-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Mask SRR0 before checking against the masked NIP powerpc/perf: Only define power_pmu_wants_prompt_pmi() for CONFIG_PPC64 powerpc/32s: Fix kasan_init_region() for KASAN powerpc/time: Fix build failure due to do_hard_irq_enable() on PPC32 powerpc/audit: Fix syscall_get_arch() powerpc64/bpf: Limit 'ldbrx' to processors compliant with ISA v2.06 tools/bpf: Rename 'struct event' to avoid naming conflict powerpc/bpf: Update ldimm64 instructions during extra pass powerpc32/bpf: Fix codegen for bpf-to-bpf calls bpf: Guard against accessing NULL pt_regs in bpf_get_task_stack()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Borislav Petkov: "A single use-after-free fix in the PCI MSI irq domain allocation path" * tag 'irq_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: PCI/MSI: Prevent UAF in error path
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Borislav Petkov: "A bunch of fixes: forced idle time accounting, utilization values propagation in the sched hierarchies and other minor cleanups and improvements" * tag 'sched_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kernel/sched: Remove dl_boosted flag comment sched: Avoid double preemption in __cond_resched_*lock*() sched/fair: Fix all kernel-doc warnings sched/core: Accounting forceidle time for all tasks except idle task sched/pelt: Relax the sync of load_sum with load_avg sched/pelt: Relax the sync of runnable_sum with runnable_avg sched/pelt: Continue to relax the sync of util_sum with util_avg sched/pelt: Relax the sync of util_sum with util_avg psi: Fix uaf issue when psi trigger is destroyed while being polled
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Add support for accessing the general purpose counters on Alder Lake via MMIO - Add new LBR format v7 support which is v5 modulo TSX - Fix counter enumeration on Alder Lake hybrids - Overhaul how context time updates are done and get rid of perf_event::shadow_ctx_time. - The usual amount of fixes: event mask correction, supported event types reporting, etc. * tag 'perf_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/perf: Avoid warning for Arch LBR without XSAVE perf/x86/intel/uncore: Add IMC uncore support for ADL perf/x86/intel/lbr: Add static_branch for LBR INFO flags perf/x86/intel/lbr: Support LBR format V7 perf/x86/rapl: fix AMD event handling perf/x86/intel/uncore: Fix CAS_COUNT_WRITE issue for ICX perf/x86/intel: Add a quirk for the calculation of the number of counters on Alder Lake perf: Fix perf_event_read_local() time
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 10 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
