Pull arm64 fixes (and cleanups) from Catalin Marinas:
 "Various arm64 fixes:

   - suspicious RCU usage warning
   - BPF (out of bounds array read and endianness conversion)
   - perf (of_node usage after of_node_put, cpu_pmu->plat_device
     assignment)
   - huge pmd/pud check for value 0
   - rate-limiting should only take unhandled signals into account

  Clean-up:

   - incorrect use of pgprot_t type
   - unused header include
   - __init annotation to arm_cpuidle_init
   - pr_debug instead of pr_error for disabled GICC entries in
     ACPI/MADT"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: Fix show_unhandled_signal_ratelimited usage
  ARM64 / SMP: Switch pr_err() to pr_debug() for disabled GICC entry
  arm64: cpuidle: add __init section marker to arm_cpuidle_init
  arm64: Don't report clear pmds and puds as huge
  arm64: perf: fix unassigned cpu_pmu->plat_device when probing PMU PPIs
  arm64: perf: Don't use of_node after putting it
  arm64: fix incorrect use of pgprot_t variable
  arm64/hw_breakpoint.c: remove unnecessary header
  arm64: bpf: fix endianness conversion bugs
  arm64: bpf: fix out-of-bounds read in bpf2a64_offset()
  ARM64: smp: Fix suspicious RCU usage with ipi tracepoints

Pull nios2 update from Ley Foon Tan:
 "Check number of timer instances"

* tag 'nios2-v4.2' of git://git.rocketboards.org/linux-socfpga-next:
  nios2: check number of timer instances

Pull more hwmon updates from Jean Delvare.

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (w83627ehf) Use swap() in w82627ehf_swap_tempreg()
  hwmon: Document which I2C addresses can be probed
  hwmon: (w83792d) Additional PWM outputs support

Pull block fixes from Jens Axboe:
 "Mainly sending this off now for the writeback fixes, since they fix a
  real regression introduced with the cgroup writeback changes.  The
  NVMe fix could wait for next pull for this series, but it's simple
  enough that we might as well include it.

  This contains:

   - two cgroup writeback fixes from Tejun, fixing a user reported issue
     with luks crypt devices hanging when being closed.

   - NVMe error cleanup fix from Jon Derrick, fixing a case where we'd
     attempt to free an unregistered IRQ"

* 'for-linus' of git://git.kernel.dk/linux-block:
  NVMe: Fix irq freeing when queue_request_irq fails
  writeback: don't drain bdi_writeback_congested on bdi destruction
  writeback: don't embed root bdi_writeback_congested in bdi_writeback

Pull fbdev fix from Tomi Valkeinen:
 "Fix display regression on TI AM4xxx boards"

* tag 'fbdev-fixes-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  OMAPDSS: fix probing if rfbi device is enabled

Pull EDAC fix from Borislav Petkov:
 "A build fix for octeon_edac from Aaro Koskinen"

* tag 'edac_urgent_for_4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, octeon: Fix broken build due to model helper renames

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 86dca36e introduced ratelimited usage for
'unhandled_signal' messages.
The commit checks the ratelimit irrespective of whether
the signal is handled or not, which is wrong and leads
to false reports like the below in dmesg :

__do_user_fault: 127 callbacks suppressed

Do the ratelimit check only if the signal is unhandled.

Fixes: 86dca36e ("arm64: use private ratelimit state along with show_unhandled_signals")
Cc: Vladimir Murzin <Vladimir.Murzin@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Use kernel.h macro definition.

Thanks to Julia Lawall for Coccinelle scripting support.
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

Add an item to the checklist when submitting a new hwmon driver: only
some I2C addresses can be probed, others should not for safety
reasons.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>

Add pwm[4-7] and the associated pwm[4-7]_mode attributes.
Signed-off-by: Roger Lucas <vt8231@hiddenengine.co.uk>
Signed-off-by: Jean Delvare <jdelvare@suse.de>

It is normal that firmware presents GICC entry or entries (processors)
with disabled flag in ACPI MADT, taking a system of 16 cpus for example,
ACPI firmware may present 8 ebabled first with another 8 cpus disabled
in MADT, the disabled cpus can be hot-added later.

Firmware may also present more cpus than the hardware actually has, but
disabled the unused ones, and easily enable it when the hardware has such
cpus to make the firmware code scalable.

So that's not an error for disabled cpus in MADT, we can switch pr_err()
to pr_debug() to make the boot a little quieter by default.

Since hwid for disabled cpus often are invalid, and we check invalid hwid
first in the code, for use case that hot add cpus later will be filtered
out and will not be counted in possible cups, so move this check before
the hwid one to prepare the code to count for disabeld cpus when cpu
hot-plug is introduced.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Reviewed-by: Al Stone <ahs3@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull ACPICA updates from Rafael Wysocki:
 "Additional ACPICA material for v4.2-rc1

  This will update the ACPICA code in the kernel to upstream revision
  20150619 (a bug-fix release mostly including stable-candidate fixes)
  and restore an earlier ACPICA commit that had to be reverted due to a
  regression introduced by it (the regression is addressed by
  blacklisting the only known system affected by it to date).

  The only new feature added by this update is the support for
  overriding objects in the ACPI namespace and a new ACPI table that can
  be used for that called the Override System Definition Table (OSDT).
  That should allow us to "patch" the ACPI namespace built from
  incomplete or incorrect ACPI System Definition tables (DSDT, SSDT)
  during system startup without the need to provide replacements for all
  of those tables in the future.

  Specifics:

   - Fix system resume problems related to 32-bit and 64-bit versions of
     the Firmware ACPI Control Structure (FACS) in the firmare (Lv
     Zheng)

   - Fix double initialization of the FACS (Lv Zheng)

   - Add _CLS object processing code to ACPICA (Suravee Suthikulpanit)

   - Add support for the (currently missing) new GIC version field in
     the Multiple APIC Description Table (MADT) (Hanjun Guo)

   - Add support for overriding objects in the ACPI namespace to ACPICA
     and OSDT support (Lv Zheng, Bob Moore, Zhang Rui)

   - Updates related to the TCPA and TPM2 ACPI tables (Bob Moore)

   - Restore the commit modifying _REV to always return "2" (as required
     by ACPI 6) and add a blacklisting mechanism for systems that may be
     affected by that change (Rafael J Wysocki)

   - Assorted fixes and cleanups (Bob Moore, Lv Zheng, Sascha Wildner)"

* tag 'acpica-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits)
  Revert 'Revert "ACPICA: Permanently set _REV to the value '2'."'
  ACPI / init: Make it possible to override _REV
  ACPICA: Update version to 20150619
  ACPICA: Comment update, no functional change
  ACPICA: Update TPM2 ACPI table
  ACPICA: Update definitions for the TCPA and TPM2 ACPI tables
  ACPICA: Split C library prototypes to new header
  ACPICA: De-macroize calls to standard C library functions
  ACPI / acpidump: Update acpidump manual
  ACPICA: acpidump: Convert the default behavior to dump from /sys/firmware/acpi/tables
  ACPICA: acpidump: Allow customized tables to be dumped without accessing /dev/mem
  ACPICA: Cleanup output for the ASL Debug object
  ACPICA: Update for acpi_install_table memory types
  ACPICA: Namespace: Change namespace override to avoid node deletion
  ACPICA: Namespace: Add support of OSDT table
  ACPICA: Namespace: Add support to allow overriding objects
  ACPICA: ACPI 6.0: Add values for MADT GIC version field
  ACPICA: Utilities: Add _CLS processing
  ACPICA: Add dragon_fly support to unix file mapping file
  ACPICA: EFI: Add EFI interface definitions to eliminate dependency of GNU EFI
  ...

It's a bug in our Makefile rules, make it show what the changing
certificate list was, and make it a warning so that people actually see
it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert commit ff284f37 (Revert "ACPICA: Permanently set _REV to
the value '2'.) as the regression introduced by commit b1ef2972
reverted by it is now addressed via a blacklist entry.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The platform firmware on some systems expects Linux to return "5" as
the supported ACPI revision which makes it expose system configuration
information in a special way.

For example, based on what ACPI exports as the supported revision,
Dell XPS 13 (2015) configures its audio device to either work in HDA
mode or in I2S mode, where the former is supposed to be used on Linux
until the latter is fully supported (in the kernel as well as in user
space).

Since ACPI 6 mandates that _REV should return "2" if ACPI 2 or later
is supported by the OS, a subsequent change will make that happen, so
make it possible to override that on systems where "5" is expected to
be returned for Linux to work correctly one them (such as the Dell
machine mentioned above).
Original-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull kbuild updates from Michal Marek:
 "Just a few kbuild core commits this time:

   - kallsyms fix for CONFIG_XIP_KERNEL

   - bashisms in scripts/link-vmlinux.sh fixed

   - workaround to make DEBUG_INFO_REDUCED more useful yet still space
     efficient

   - clang is not wrongly detected when cross-compiling"

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: include core debug info when DEBUG_INFO_REDUCED
  scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel
  scripts: fix link-vmlinux.sh bash-ism
  Makefile: Fix detection of clang when cross-compiling

Pull kconfig updates from Michal Marek:

 - kconfig conditions can use usual less/greater than comparisons

 - kconfig warns about stray characters in Kconfig files

 - bogus expression simplification removed

 - some minor fixes

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kconfig: re-generate *.c_shipped files after previous change
  kconfig: allow use of relations other than (in)equality
  kconfig: don't silently ignore unhandled characters
  kconfig: Wrap long "make help" text lines
  scripts/kconfig/Makefile: Cosmetic fixes
  scripts/kconfig/Makefile: Fix spelling of Qt
  Kconfig: Remove bad inference rules expr_eliminate_dups2()

Merge tag 'hwmon-for-linus-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Two patches headed for stable:
   - Fix broken output scaling in mcp3021 driver
   - Fix attribute visibility in nct7802 driver

  One regression:
   - Fix name attribute in dell-smm-hwmon driver"

* tag 'hwmon-for-linus-v4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (mcp3021) Fix broken output scaling
  hwmon: (nct7802) fix visibility of temp3
  hwmon: (dell-smm-hwmon) Use a valid name attribute

Pull ia64 boot noise reduction fix from Tony Luck:
 "Remove some boot noise from a now-invalid check that pages are
  reserved"

* tag 'please-pull-put_kernel_page' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Drop debug test/printk that some special pages are marked reserved

Pull ARM SoC late fixes and dependencies from Kevin Hilman:
 "This is a collection of a few late fixes and other misc stuff that had
  dependencies on things being merged from other trees.

  Other than the fixes, the primary feature being added is the
  conversion of some OMAP drivers to the new generic wakeirq interface"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Enable BRCMNAND driver
  ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNAND
  ARM: at91/dt: update udc compatible strings
  ARM: at91/dt: trivial: fix USB udc compatible string
  arm64: dts: Add APM X-Gene standby GPIO controller DTS entries
  soc: qcom: spm: Fix idle on THUMB2 kernels
  ARM: dove: fix legacy dove IRQ numbers
  ARM: mvebu: fix suspend to RAM on big-endian configurations
  ARM: mvebu: adjust Armada XP DT spi muxing after pinctrl function rename
  serial: 8250_omap: Move wake-up interrupt to generic wakeirq
  serial: omap: Switch wake-up interrupt to generic wakeirq
  mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq

Pull radeon and amdgpu fixes from Alex Deucher:
 "First round of fixes for 4.2 for radeon and amdgpu.  Stuff all over
  the place:

   - hibernation, suspend fixes for radeon and amdgpu
   - radeon audio fix
   - amdgpu ioctl optimzations and fixes
   - amdgpu VCE cs checker improvements
   - misc bug fixes"

[ Dave on vacation, pulling directly ]

* 'drm-next-4.2' of git://people.freedesktop.org/~agd5f/linux: (30 commits)
  drm/radeon: only check the sink type on DP connectors
  drm/amdgpu: add flag to delay VM updates
  drm/amdgpu: add optional dependencies to the CS IOCTL v2
  drm/amdgpu: recreate fence from user seq
  gpu/drm/amdgpu: Fix build when CONFIG_DEBUG_FS is not set
  Revert "drm/radeon: dont switch vt on suspend"
  drm/amdgpu: disable enable_nb_ps_policy temporarily
  drm/amdgpu: correct define SMU_EnabledFeatureScoreboard_SclkDpmOn
  drm/amdgpu: allocate ip_block_enabled memory in common code
  drm/amdgpu: remove unnecessary check before kfree
  drm/amdgpu: use kzalloc for allocating one thing
  drm/radeon: fix adding all VAs to the freed list on remove v2
  drm/amdgpu: add chunk id validity check
  drm/amdgpu: fix crash on invalid CS IOCTL
  drm/amdgpu: reset wptr at cp compute resume (v2)
  drm/amdgpu: check VCE feedback and bitstream index
  drm/amdgpu: make VCE handle check more strict
  drm/amdgpu: check VCE relocation buffer range
  drm/amdgpu: silence invalid error message
  drm/amdgpu: fix wrong type
  ...

Pull intel drm fixes from Jani Nikula:
 "Almost all of it is regression fixes all around, with cc: stable, and
  then there's Ander's fix for one of the warnings you reported.  We're
  still working on the rest"

[ Dave is on vacation, and Jani is heading out on vacation too ]

* tag 'drm-intel-next-fixes-2015-07-02' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Clear pipe's pll hw state in hsw_dp_set_ddi_pll_sel()
  drm/i915: fix backlight after resume on 855gm
  agp/intel: Fix typo in needs_ilk_vtd_wa()
  drm/i915/ppgtt: Break loop in gen8_ppgtt_clear_range failure path
  drm/i915: Fix IPS related flicker

In commit 92923ca3 "mm: meminit: only set page reserved in the memblock region"
we dropped setting the reserved bits for all pages. This results in some warnings
on ia64:

put_kernel_page: page at 0xe000000005588000 not in reserved memory
put_kernel_page: page at 0xe000000005588000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory
put_kernel_page: page at 0xe000000005580000 not in reserved memory

the two different pages match up with two objects from the loaded kernel
that get mapped by arch/ia64/mm/init.c:setup_gate()

a000000101588000 D __start_gate_section
a000000101580000 D empty_zero_page

In a discussion with Mel Gorman:
  http://lkml.kernel.org/r/20150526102219.GB13750%40suse.de
he suggested that while the preferred approach might be to
set the reserved bit for these pages, it would also be OK
to just drop the test:
   "as it's a debugging check that is ia-64 specific"

After hunting around a bit and failin to find a good place to mark these
pages as reserved - I decided to just delete the test.
Signed-off-by: Tony Luck <tony.luck@intel.com>

Pull Ceph updates from Sage Weil:
 "We have a pile of bug fixes from Ilya, including a few patches that
  sync up the CRUSH code with the latest from userspace.

  There is also a long series from Zheng that fixes various issues with
  snapshots, inline data, and directory fsync, some simplification and
  improvement in the cap release code, and a rework of the caching of
  directory contents.

  To top it off there are a few small fixes and cleanups from Benoit and
  Hong"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits)
  rbd: use GFP_NOIO in rbd_obj_request_create()
  crush: fix a bug in tree bucket decode
  libceph: Fix ceph_tcp_sendpage()'s more boolean usage
  libceph: Remove spurious kunmap() of the zero page
  rbd: queue_depth map option
  rbd: store rbd_options in rbd_device
  rbd: terminate rbd_opts_tokens with Opt_err
  ceph: fix ceph_writepages_start()
  rbd: bump queue_max_segments
  ceph: rework dcache readdir
  crush: sync up with userspace
  crush: fix crash from invalid 'take' argument
  ceph: switch some GFP_NOFS memory allocation to GFP_KERNEL
  ceph: pre-allocate data structure that tracks caps flushing
  ceph: re-send flushing caps (which are revoked) in reconnect stage
  ceph: send TID of the oldest pending caps flush to MDS
  ceph: track pending caps flushing globally
  ceph: track pending caps flushing accurately
  libceph: fix wrong name "Ceph filesystem for Linux"
  ceph: fix directory fsync
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable patches:
   - Fix a crash in the NFSv4 file locking code.
   - Fix an fsync() regression, where we were failing to retry I/O in
     some circumstances.
   - Fix an infinite loop in NFSv4.0 OPEN stateid recovery
   - Fix a memory leak when an attempted pnfs fails.
   - Fix a memory leak in the backchannel code
   - Large hostnames were not supported correctly in NFSv4.1
   - Fix a pNFS/flexfiles bug that was impeding error reporting on I/O.
   - Fix a couple of credential issues in pNFS/flexfiles

  Bugfixes + cleanups:
   - Open flag sanity checks in the NFSv4 atomic open codepath
   - More NFSv4 delegation related bugfixes
   - Various NFSv4.1 backchannel bugfixes and cleanups
   - Fix the NFS swap socket code
   - Various cleanups of the NFSv4 SETCLIENTID and EXCHANGE_ID code
   - Fix a UDP transport deadlock issue

  Features:
   - More RDMA client transport improvements
   - NFSv4.2 LAYOUTSTATS functionality for pnfs flexfiles"

* tag 'nfs-for-4.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (87 commits)
  nfs: Remove invalid tk_pid from debug message
  nfs: Remove invalid NFS_ATTR_FATTR_V4_REFERRAL checking in nfs4_get_rootfh
  nfs: Drop bad comment in nfs41_walk_client_list()
  nfs: Remove unneeded micro checking of CONFIG_PROC_FS
  nfs: Don't setting FILE_CREATED flags always
  nfs: Use remove_proc_subtree() instead remove_proc_entry()
  nfs: Remove unused argument in nfs_server_set_fsinfo()
  nfs: Fix a memory leak when meeting an unsupported state protect
  nfs: take extra reference to fl->fl_file when running a LOCKU operation
  NFSv4: When returning a delegation, don't reclaim an incompatible open mode.
  NFSv4.2: LAYOUTSTATS is optional to implement
  NFSv4.2: Fix up a decoding error in layoutstats
  pNFS/flexfiles: Fix the reset of struct pgio_header when resending
  pNFS/flexfiles: Turn off layoutcommit for servers that don't need it
  pnfs/flexfiles: protect ktime manipulation with mirror lock
  nfs: provide pnfs_report_layoutstat when NFS42 is disabled
  nfs: verify open flags before allowing open
  nfs: always update creds in mirror, even when we have an already connected ds
  nfs: fix potential credential leak in ff_layout_update_mirror_cred
  pnfs/flexfiles: report layoutstat regularly
  ...

Pull overlayfs updates from Miklos Szeredi:
 "This relaxes the requirements on the lower layer filesystem: now ones
  that implement .d_revalidate, such as NFS, can be used.

  Upper layer filesystems still has the "no .d_revalidate" requirement.

  Also a bad interaction with jffs2 locking has been fixed"

* 'overlayfs-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: lookup whiteouts outside iterate_dir()
  ovl: allow distributed fs as lower layer
  ovl: don't traverse automount points

Pull fuse updates from Miklos Szeredi:
 "This is the start of improving fuse scalability.

  An input queue and a processing queue is split out from the monolithic
  fuse connection, each of those having their own spinlock.  The end of
  the patchset adds the ability to clone a fuse connection.  This means,
  that instead of having to read/write requests/answers on a single fuse
  device fd, the fuse daemon can have multiple distinct file descriptors
  open.  Each of those can be used to receive requests and send answers,
  currently the only constraint is that a request must be answered on
  the same fd as it was read from.

  This can be extended further to allow binding a device clone to a
  specific CPU or NUMA node.

  Based on a patchset by Srinivas Eeda and Ashish Samant.  Thanks to
  Ashish for the review of this series"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (40 commits)
  fuse: update MAINTAINERS entry
  fuse: separate pqueue for clones
  fuse: introduce per-instance fuse_dev structure
  fuse: device fd clone
  fuse: abort: no fc->lock needed for request ending
  fuse: no fc->lock for pqueue parts
  fuse: no fc->lock in request_end()
  fuse: cleanup request_end()
  fuse: request_end(): do once
  fuse: add req flag for private list
  fuse: pqueue locking
  fuse: abort: group pqueue accesses
  fuse: cleanup fuse_dev_do_read()
  fuse: move list_del_init() from request_end() into callers
  fuse: duplicate ->connected in pqueue
  fuse: separate out processing queue
  fuse: simplify request_wait()
  fuse: no fc->lock for iqueue parts
  fuse: allow interrupt queuing without fc->lock
  fuse: iqueue locking
  ...

Pull init.h/module.h fragility fixes from Paul Gortmaker:
 "Fixup various init.h misuses that are fragile wrt code moving to
  module.h

  What started as a removal of no longer required include <linux/init.h>
  due to the earlier __cpuinit and __devinit removal led to the
  observation that some module specfic support was living in init.h
  itself, thus preventing the full removal from introducing compile
  regressions.

  This series includes a few final fixups needed prior to the relocation
  of the modular init code from <init.h> to <module.h>.  These are
  things that weren't easily categorized into any of the other previous
  series categories already requested for pull.

  That said, each fixup branch (including this one) is independent and
  there are no ordering constraints.  Only the final code relocation
  (which is NOT in this pull) requires that all my cleanup branches be
  merged first"

* tag 'module-misc-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  tile: add init.h to usb.c to avoid compile failure
  arm: fix implicit #include <linux/init.h> in entry asm.
  x86: replace __init_or_module with __init in non-modular vsmp_64.c

Merge tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_platform_driver replacement from Paul Gortmaker:
 "Replace module_platform_driver with builtin_platform driver in non
  modules.

  We see an increasing number of non-modular drivers using
  modular_driver() type register functions.  There are several downsides
  to letting this continue unchecked:

   - The code can appear modular to a reader of the code, and they won't
     know if the code really is modular without checking the Makefile
     and Kconfig to see if compilation is governed by a bool or
     tristate.

   - Coders of drivers may be tempted to code up an __exit function that
     is never used, just in order to satisfy the required three args of
     the modular registration function.

   - Non-modular code ends up including the <module.h> which increases
     CPP overhead that they don't need.

   - It hinders us from performing better separation of the module init
     code and the generic init code.

  So here we introduce similar macros for builtin drivers.  Then we
  convert builtin drivers (controlled by a bool Kconfig) by making the
  following type of mapping:

    module_platform_driver()       --->  builtin_platform_driver()
    module_platform_driver_probe() --->  builtin_platform_driver_probe().

  The set of drivers that are converted here are just the ones that
  showed up as relying on an implicit include of <module.h> during a
  pending header cleanup.  So we convert them here vs adding an include
  of <module.h> to non-modular code to avoid compile fails.  Additonal
  conversions can be done asynchronously at any time.

  Once again, an unused module_exit function that is removed here
  appears in the diffstat as an outlier wrt all the other changes"

* tag 'module-builtin_driver-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  drivers/clk: convert sunxi/clk-mod0.c to use builtin_platform_driver
  drivers/power: Convert non-modular syscon-reboot to use builtin_platform_driver
  drivers/soc: Convert non-modular soc-realview to use builtin_platform_driver
  drivers/soc: Convert non-modular tegra/pmc to use builtin_platform_driver
  drivers/cpufreq: Convert non-modular s5pv210-cpufreq.c to use builtin_platform_driver
  drivers/cpuidle: Convert non-modular drivers to use builtin_platform_driver
  drivers/platform: Convert non-modular pdev_bus to use builtin_platform_driver
  platform_device: better support builtin boilerplate avoidance

Merge tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_init replacement part two from Paul Gortmaker:
 "Replace module_init with appropriate alternate initcall in non
  modules.

  This series converts non-modular code that is using the module_init()
  call to hook itself into the system to instead use one of our
  alternate priority initcalls.

  Unlike the previous series that used device_initcall and hence was a
  runtime no-op, these commits change to one of the alternate initcalls,
  because (a) we have them and (b) it seems like the right thing to do.

  For example, it would seem logical to use arch_initcall for arch
  specific setup code and fs_initcall for filesystem setup code.

  This does mean however, that changes in the init ordering will be
  taking place, and so there is a small risk that some kind of implicit
  init ordering issue may lie uncovered.  But I think it is still better
  to give these ones sensible priorities than to just assign them all to
  device_initcall in order to exactly preserve the old ordering.

  Thad said, we have already made similar changes in core kernel code in
  commit c96d6660 ("kernel: audit/fix non-modular users of
  module_init in core code") without any regressions reported, so this
  type of change isn't without precedent.  It has also got the same
  local testing and linux-next coverage as all the other pull requests
  that I'm sending for this merge window have got.

  Once again, there is an unused module_exit function removal that shows
  up as an outlier upon casual inspection of the diffstat"

* tag 'module_init-alternate_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  x86: perf_event_intel_pt.c: use arch_initcall to hook in enabling
  x86: perf_event_intel_bts.c: use arch_initcall to hook in enabling
  mm/page_owner.c: use late_initcall to hook in enabling
  lib/list_sort: use late_initcall to hook in self tests
  arm: use subsys_initcall in non-modular pl320 IPC code
  powerpc: don't use module_init for non-modular core hugetlb code
  powerpc: use subsys_initcall for Freescale Local Bus
  x86: don't use module_init for non-modular core bootflag code
  netfilter: don't use module_init/exit in core IPV4 code
  fs/notify: don't use module_init for non-modular inotify_user code
  mm: replace module_init usages with subsys_initcall in nommu.c

Merge tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

Pull module_init replacement part one from Paul Gortmaker:
 "Replace module_init with equivalent device_initcall in non modules.

  This series of commits converts non-modular code that is using the
  module_init() call to hook itself into the system to instead use
  device_initcall().

  The conversion is a runtime no-op, since module_init actually becomes
  __initcall in the non-modular case, and that in turn gets mapped onto
  device_initcall.  A couple files show a larger negative diffstat,
  representing ones that had a module_exit function that we remove here
  vs previously relying on the linker to dispose of it.

  We make this conversion now, so that we can relocate module_init from
  init.h into module.h in the future.

  The files changed here are just limited to those that would otherwise
  have to add module.h to obviously non-modular code, in order to avoid
  a compile fail, as testing has shown"

* tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  MIPS: don't use module_init in non-modular cobalt/mtd.c file
  drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c
  cris: don't use module_init for non-modular core eeprom.c code
  tty/metag_da: Avoid module_init/module_exit in non-modular code
  drivers/clk: don't use module_init in clk-nomadik.c which is non-modular
  xtensa: don't use module_init for non-modular core network.c code
  sh: don't use module_init in non-modular psw.c code
  mn10300: don't use module_init in non-modular flash.c code
  parisc64: don't use module_init for non-modular core perf code
  parisc: don't use module_init for non-modular core pdc_cons code
  cris: don't use module_init for non-modular core intmem.c code
  ia64: don't use module_init in non-modular sim/simscsi.c code
  ia64: don't use module_init for non-modular core kernel/mca.c code
  arm: don't use module_init in non-modular mach-vexpress/spc.c code
  powerpc: don't use module_init in non-modular 83xx suspend code
  powerpc: use device_initcall for registering rtc devices
  x86: don't use module_init in non-modular devicetree.c code
  x86: don't use module_init in non-modular intel_mid_vrtc.c

Pull implicit module.h fixes from Paul Gortmaker:
 "Fix up implicit <module.h> users that will break later.

  The files changed here are simply modular source files that are
  implicitly relying on <module.h> being present.  We fix them up now,
  so that we can decouple some of the module related init code from the
  core init code in the future.

  The addition of the module.h include to several files here is also a
  no-op from a code generation point of view, else there would already
  be compile issues with these files today.

  There may be lots more implicit includes of <module.h> in tree, but
  these are the ones that extensive build test coverage has shown that
  must be fixed in order to avoid build breakage fallout for the pending
  module.h <---> init.h code relocation we desire to complete"

* tag 'module-implicit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  frv: add module.h to mb93090-mb00/flash.c to avoid compile fail
  drivers/cpufreq: include <module.h> for modular exynos-cpufreq.c code
  drivers/staging: include <module.h> for modular android tegra_ion code
  crypto/asymmetric_keys: pkcs7_key_type needs module.h
  sh: mach-highlander/psw.c is tristate and should use module.h
  drivers/regulator: include <module.h> for modular max77802 code
  drivers/pcmcia: include <module.h> for modular xxs1500_ss code
  drivers/hsi: include <module.h> for modular omap_ssi code
  drivers/gpu: include <module.h> for modular rockchip code
  drivers/gpio: include <module.h> for modular crystalcove code
  drivers/clk: include <module.h> for clk-max77xxx modular code

Pull __cpuinit removal from Paul Gortmaker:
 "Remove __cpuinit macros and users.

  We removed the __cpuinit stuff in 3.11-rc1 with commit 22f0a273
  ("init.h: remove __cpuinit sections from the kernel") but we left some
  no-op stubs as a courtesy to unmerged code.

  Here we get rid of the stubs as well, since (as can be seen in these
  changes) they are enabling use cases to sneak back in, primarily from
  older BSP code that has been living out of tree for some time prior to
  getting mainlined.  So we get rid of these "new" users 1st and then
  get rid of the stubs.

  Obviously, getting rid of the stubs can't happen until all the users
  are gone, so I had to keep this together as a series, even though some
  of these commits since got picked up into maintainers trees as well.

  The nature of this change is such that it should have zero impact on
  the generated runtime.

  This is one of several independent cleanup branches aimed at enabling
  better organization in the init.h and module.h code.  They have been
  getting coverage in the linux-next tree for the last month, in
  addition to my local testing, which also covers approximately a half
  dozen or more architectures"

* tag 'cpuinit-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux:
  init: delete the __cpuinit related stubs
  kernel/cpu.c: remove new instance of __cpuinit that crept back in
  sched/core: remove __cpuinit section tag that crept back in.
  mips/mm/tlbex: remove new instance of __cpuinit that crept back in
  mips/c-r4k: remove legacy __cpuinit section that crept in
  mips/bcm77xx: remove legacy __cpuinit sections that crept in
  mips/ath25: remove legacy __cpuinit section that crept in
  arm/mach-hisi: remove legacy __CPUINIT section that crept in
  arm/mach-rockchip: remove legacy __cpuinit section that crept in
  arm/mach-mvebu: remove legacy __cpuinit sections that crept in
  arm/mach-keystone: remove legacy __cpuinit sections that crept in

It is not needed after booting, this patch moves the arm_cpuidle_init()
function to the __init section.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Fixes an issue when queue_reuest_irq fails in nvme_setup_io_queues. This
patch initializes all vectors to -1 and resets the vector to -1 in the
case of a failure in queue_request_irq. This avoids the free_irq in
nvme_suspend_queue if the queue did not get an irq.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

52ebea74 ("writeback: make backing_dev_info host cgroup-specific
bdi_writebacks") made bdi (backing_dev_info) host per-cgroup wb's
(bdi_writeback's).  As the congested state needs to be per-wb and
referenced from blkcg side and multiple wbs, the patch made all
non-root cong's (bdi_writeback_congested's) reference counted and
indexed on bdi.

When a bdi is destroyed, cgwb_bdi_destroy() tries to drain all
non-root cong's; however, this can hang indefinitely because wb's can
also be referenced from blkcg_gq's which are destroyed after bdi
destruction is complete.

This patch fixes the bug by updating bdi destruction to not wait for
cong's to drain.  A cong is unlinked from bdi->cgwb_congested_tree on
bdi destuction regardless of its reference count as the bdi may go
away any point after destruction.  wb_congested_put() checks whether
the cong is already unlinked on release.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jon Christopherson <jon@jons.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100681
Fixes: 52ebea74 ("writeback: make backing_dev_info host cgroup-specific bdi_writebacks")
Tested-by: Jon Christopherson <jon@jons.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

52ebea74 ("writeback: make backing_dev_info host cgroup-specific
bdi_writebacks") made bdi (backing_dev_info) host per-cgroup wb's
(bdi_writeback's).  As the congested state needs to be per-wb and
referenced from blkcg side and multiple wbs, the patch made all
non-root cong's (bdi_writeback_congested's) reference counted and
indexed on bdi.

When a bdi is destroyed, cgwb_bdi_destroy() tries to drain all
non-root cong's; however, this can hang indefinitely because wb's can
also be referenced from blkcg_gq's which are destroyed after bdi
destruction is complete.

To fix the bug, bdi destruction will be updated to not wait for cong's
to drain, which naturally means that cong's may outlive the associated
bdi.  This is fine for non-root cong's but is problematic for the root
cong's which are embedded in their bdi's as they may end up getting
dereferenced after the containing bdi's are freed.

This patch makes root cong's behave the same as non-root cong's.  They
are no longer embedded in their bdi's but allocated separately during
bdi initialization, indexed and reference counted the same way.

* As cong handling is the same for all wb's, wb->congested
  initialization is moved into wb_init().

* When !CONFIG_CGROUP_WRITEBACK, there was no indexing or refcnting.
  bdi->wb_congested is now a pointer pointing to the root cong
  allocated during bdi init and minimal refcnting operations are
  implemented.

* The above makes root wb init paths diverge depending on
  CONFIG_CGROUP_WRITEBACK.  root wb init is moved to cgwb_bdi_init().

This patch in itself shouldn't cause any consequential behavior
differences but prepares for the actual fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jon Christopherson <jon@jons.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100681Tested-by: Jon Christopherson <jon@jons.org>

Added <linux/slab.h> include to backing-dev.h for kfree() definition.
Signed-off-by: Jens Axboe <axboe@fb.com>

After the commit 736e60dd ("OMAPDSS:
componentize omapdss") the dss core device will wait until all the
subdevices have been successfully probed. However, we don't have a
working driver for RFBI, so if RFBI device exists, omapdss will never
get probed.

All the .dtsi files set RFBI as disabled, except am4372.dtsi. This
causes omapdss probe to not finish on AM4 devices.

This patch makes omapdss driver skip adding rfbi device as a
subcomponent, solving the issue.

This should be reverted when we have a working RFBI driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Felipe Balbi <balbi@ti.com>

Commit

  debe6a62 ("MIPS: OCTEON: Update octeon-model.h code for new SoCs.")

renamed some SoC model helper functions, but forgot to update the EDAC
drivers resulting in build failures. Fix that.

Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/1435747132-10954-1-git-send-email-aaro.koskinen@nokia.comSigned-off-by: Borislav Petkov <bp@suse.de>