- 05 Oct, 2017 22 commits
-
-
Marc Zyngier authored
commit 5371513f upstream. When the kernel is entered at EL2 on an ARMv8.0 system, we construct the EL1 pstate and make sure this uses the the EL1 stack pointer (we perform an exception return to EL1h). But if the kernel is either entered at EL1 or stays at EL2 (because we're on a VHE-capable system), we fail to set SPsel, and use whatever stack selection the higher exception level has choosen for us. Let's not take any chance, and make sure that SPsel is set to one before we decide the mode we're going to run in. Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oleg Nesterov authored
commit 66a733ea upstream. As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end up using different filters. Once we drop ->siglock it is possible for task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC. Fixes: f8e529ed ("seccomp, ptrace: add support for dumping seccomp filters") Reported-by:
Chris Salls <chrissalls5@gmail.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> [tycho: add __get_seccomp_filter vs. open coding refcount_inc()] Signed-off-by:
Tycho Andersen <tycho@docker.com> [kees: tweak commit log] Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Christoph Hellwig authored
commit f507b54d upstream. The job structure is allocated as part of the request, so we should not free it in the error path of bsg_prepare_job. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vladis Dronov authored
commit e785fa0a upstream. nl80211_set_rekey_data() does not check if the required attributes NL80211_REKEY_DATA_{REPLAY_CTR,KEK,KCK} are present when processing NL80211_CMD_SET_REKEY_OFFLOAD request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attributes presence. This patch is based on the patch by bo Zhang. This fixes CVE-2017-12153. References: https://bugzilla.redhat.com/show_bug.cgi?id=1491046 Fixes: e5497d76 ("cfg80211/nl80211: support GTK rekey offload") Reported-by:
bo Zhang <zhangbo5891001@gmail.com> Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Andreas Gruenbacher authored
commit fc46820b upstream. In generic_file_llseek_size, return -ENXIO for negative offsets as well as offsets beyond EOF. This affects filesystems which don't implement SEEK_HOLE / SEEK_DATA internally, possibly because they don't support holes. Fixes xfstest generic/448. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steve French authored
commit 1013e760 upstream. Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
-
Steve French authored
commit 0603c96f upstream. As long as signing is supported (ie not a guest user connection) and connection is SMB3 or SMB3.02, then validate negotiate (protect against man in the middle downgrade attacks). We had been doing this only when signing was required, not when signing was just enabled, but this more closely matches recommended SMB3 behavior and is better security. Suggested by Metze. Signed-off-by:
Jeremy Allison <jra@samba.org> Acked-by:
Stefan Metzmacher <metze@samba.org> Reviewed-by:
-
Steve French authored
commit 23586b66 upstream. Samba rejects SMB3.1.1 dialect (vers=3.1.1) negotiate requests from the kernel client due to the two byte pad at the end of the negotiate contexts. Signed-off-by:
-
Tyrel Datwyler authored
commit b537ca6f upstream. A reference to the parent device node is held by add_dt_node() for the node to be added. If the call to dlpar_configure_connector() fails add_dt_node() returns ENOENT and that reference is not freed. Add a call to of_node_put(parent_dn) prior to bailing out after a failed dlpar_configure_connector() call. Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Eric Biggers authored
commit 37863c43 upstream. Because keyctl_read_key() looks up the key with no permissions requested, it may find a negatively instantiated key. If the key is also possessed, we went ahead and called ->read() on the key. But the key payload will actually contain the ->reject_error rather than the normal payload. Thus, the kernel oopses trying to read the user_key_payload from memory address (int)-ENOKEY = 0x00000000ffffff82. Fortunately the payload data is stored inline, so it shouldn't be possible to abuse this as an arbitrary memory read primitive... Reproducer: keyctl new_session keyctl request2 user desc '' @s keyctl read $(keyctl show | awk '/user: desc/ {print $1}') It causes a crash like the following: BUG: unable to handle kernel paging request at 00000000ffffff92 IP: user_read+0x33/0xa0 PGD 36a54067 P4D 36a54067 PUD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 211 Comm: keyctl Not tainted 4.14.0-rc1 #337 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 task: ffff90aa3b74c3c0 task.stack: ffff9878c0478000 RIP: 0010:user_read+0x33/0xa0 RSP: 0018:ffff9878c047bee8 EFLAGS: 00010246 RAX: 0000000000000001 RBX: ffff90aa3d7da340 RCX: 0000000000000017 RDX: 0000000000000000 RSI: 00000000ffffff82 RDI: ffff90aa3d7da340 RBP: ffff9878c047bf00 R08: 00000024f95da94f R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f58ece69740(0000) GS:ffff90aa3e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000ffffff92 CR3: 0000000036adc001 CR4: 00000000003606f0 Call Trace: keyctl_read_key+0xac/0xe0 SyS_keyctl+0x99/0x120 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x7f58ec787bb9 RSP: 002b:00007ffc8d401678 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa RAX: ffffffffffffffda RBX: 00007ffc8d402800 RCX: 00007f58ec787bb9 RDX: 0000000000000000 RSI: 00000000174a63ac RDI: 000000000000000b RBP: 0000000000000004 R08: 00007ffc8d402809 R09: 0000000000000020 R10: 0000000000000000 R11: 0000000000000206 R12: 00007ffc8d402800 R13: 00007ffc8d4016e0 R14: 0000000000000000 R15: 0000000000000000 Code: e5 41 55 49 89 f5 41 54 49 89 d4 53 48 89 fb e8 a4 b4 ad ff 85 c0 74 09 80 3d b9 4c 96 00 00 74 43 48 8b b3 20 01 00 00 4d 85 ed <0f> b7 5e 10 74 29 4d 85 e4 74 24 4c 39 e3 4c 89 e2 4c 89 ef 48 RIP: user_read+0x33/0xa0 RSP: ffff9878c047bee8 CR2: 00000000ffffff92 Fixes: 61ea0c0b ("KEYS: Skip key state checks when checking for possession") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 237bbd29 upstream. It was possible for an unprivileged user to create the user and user session keyrings for another user. For example: sudo -u '#3000' sh -c 'keyctl add keyring _uid.4000 "" @u keyctl add keyring _uid_ses.4000 "" @u sleep 15' & sleep 1 sudo -u '#4000' keyctl describe @u sudo -u '#4000' keyctl describe @us This is problematic because these "fake" keyrings won't have the right permissions. In particular, the user who created them first will own them and will have full access to them via the possessor permissions, which can be used to compromise the security of a user's keys: -4: alswrv-----v------------ 3000 0 keyring: _uid.4000 -5: alswrv-----v------------ 3000 0 keyring: _uid_ses.4000 Fix it by marking user and user session keyrings with a flag KEY_FLAG_UID_KEYRING. Then, when searching for a user or user session keyring by name, skip all keyrings that don't have the flag set. Fixes: 69664cf1 ("keys: don't generate user and user session keyrings unless they're accessed") Signed-off-by:
-
Eric Biggers authored
commit e645016a upstream. Userspace can call keyctl_read() on a keyring to get the list of IDs of keys in the keyring. But if the user-supplied buffer is too small, the kernel would write the full list anyway --- which will corrupt whatever userspace memory happened to be past the end of the buffer. Fix it by only filling the space that is available. Fixes: b2a4df20 ("KEYS: Expand the capacity of a keyring") Signed-off-by:
-
LEROY Christophe authored
commit afd62fa2 upstream. Kernel crypto tests report the following error at startup [ 2.752626] alg: hash: Test 4 failed for sha224-talitos [ 2.757907] 00000000: 30 e2 86 e2 e7 8a dd 0d d7 eb 9f d5 83 fe f1 b0 00000010: 2d 5a 6c a5 f9 55 ea fd 0e 72 05 22 This patch fixes it Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
LEROY Christophe authored
commit 56136631 upstream. Today, md5sum fails with error -ENOKEY because a setkey function is set for non hmac hashing algs, see strace output below: mmap(NULL, 378880, PROT_READ, MAP_SHARED, 6, 0) = 0x77f50000 accept(3, 0, NULL) = 7 vmsplice(5, [{"bin/\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 378880}], 1, SPLICE_F_MORE|SPLICE_F_GIFT) = 262144 splice(4, NULL, 7, NULL, 262144, SPLICE_F_MORE) = -1 ENOKEY (Required key not available) write(2, "Generation of hash for file kcap"..., 50) = 50 munmap(0x77f50000, 378880) = 0 This patch ensures that setkey() function is set only for hmac hashing. Signed-off-by:
-
Xin Long authored
commit c88f0e6b upstream. ChunYu found a kernel crash by syzkaller: [ 651.617875] kasan: CONFIG_KASAN_INLINE enabled [ 651.618217] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 651.618731] general protection fault: 0000 [#1] SMP KASAN [ 651.621543] CPU: 1 PID: 9539 Comm: scsi Not tainted 4.11.0.cov #32 [ 651.621938] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 651.622309] task: ffff880117780000 task.stack: ffff8800a3188000 [ 651.622762] RIP: 0010:skb_release_data+0x26c/0x590 [...] [ 651.627260] Call Trace: [ 651.629156] skb_release_all+0x4f/0x60 [ 651.629450] consume_skb+0x1a5/0x600 [ 651.630705] netlink_unicast+0x505/0x720 [ 651.632345] netlink_sendmsg+0xab2/0xe70 [ 651.633704] sock_sendmsg+0xcf/0x110 [ 651.633942] ___sys_sendmsg+0x833/0x980 [ 651.637117] __sys_sendmsg+0xf3/0x240 [ 651.638820] SyS_sendmsg+0x32/0x50 [ 651.639048] entry_SYSCALL_64_fastpath+0x1f/0xc2 It's caused by skb_shared_info at the end of sk_buff was overwritten by ISCSI_KEVENT_IF_ERROR when parsing nlmsg info from skb in iscsi_if_rx. During the loop if skb->len == nlh->nlmsg_len and both are sizeof(*nlh), ev = nlmsg_data(nlh) will acutally get skb_shinfo(SKB) instead and set a new value to skb_shinfo(SKB)->nr_frags by ev->type. This patch is to fix it by checking nlh->nlmsg_len properly there to avoid over accessing sk_buff. Reported-by:
ChunYu Wang <chunwang@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Dennis Yang authored
commit 184a09eb upstream. In release_stripe_plug(), if a stripe_head has its STRIPE_ON_UNPLUG_LIST set, it indicates that this stripe_head is already in the raid5_plug_cb list and release_stripe() would be called instead to drop a reference count. Otherwise, the STRIPE_ON_UNPLUG_LIST bit would be set for this stripe_head and it will get queued into the raid5_plug_cb list. Since break_stripe_batch_list() did not preserve STRIPE_ON_UNPLUG_LIST, A stripe could be re-added to plug list while it is still on that list in the following situation. If stripe_head A is added to another stripe_head B's batch list, in this case A will have its batch_head != NULL and be added into the plug list. After that, stripe_head B gets handled and called break_stripe_batch_list() to reset all the batched stripe_head(including A which is still on the plug list)'s state and reset their batch_head to NULL. Before the plug list gets processed, if there is another write request comes in and get stripe_head A, A will have its batch_head == NULL (cleared by calling break_stripe_batch_list() on B) and be added to plug list once again. Signed-off-by:
Dennis Yang <dennisyang@qnap.com> Signed-off-by:
Shaohua Li <shli@fb.com> Signed-off-by:
-
Shaohua Li authored
commit 3664847d upstream. We have a race condition in below scenario, say have 3 continuous stripes, sh1, sh2 and sh3, sh1 is the stripe_head of sh2 and sh3: CPU1 CPU2 CPU3 handle_stripe(sh3) stripe_add_to_batch_list(sh3) -> lock(sh2, sh3) -> lock batch_lock(sh1) -> add sh3 to batch_list of sh1 -> unlock batch_lock(sh1) clear_batch_ready(sh1) -> lock(sh1) and batch_lock(sh1) -> clear STRIPE_BATCH_READY for all stripes in batch_list -> unlock(sh1) and batch_lock(sh1) ->clear_batch_ready(sh3) -->test_and_clear_bit(STRIPE_BATCH_READY, sh3) --->return 0 as sh->batch == NULL -> sh3->batch_head = sh1 -> unlock (sh2, sh3) In CPU1, handle_stripe will continue handle sh3 even it's in batch stripe list of sh1. By moving sh3->batch_head assignment in to batch_lock, we make it impossible to clear STRIPE_BATCH_READY before batch_head is set. Thanks Stephane for helping debug this tricky issue. Reported-and-tested-by:
Stephane Thiell <sthiell@stanford.edu> Signed-off-by:
-
Bo Yan authored
commit 8dd33bcb upstream. One convenient way to erase trace is "echo > trace". However, this is currently broken if the current tracer is irqsoff tracer. This is because irqsoff tracer use max_buffer as the default trace buffer. Set the max_buffer as the one to be cleared when it's the trace buffer currently in use. Link: http://lkml.kernel.org/r/1505754215-29411-1-git-send-email-byan@nvidia.com Cc: <mingo@redhat.com> Fixes: 4acd4d00 ("tracing: give easy way to clear trace buffer") Signed-off-by:
Bo Yan <byan@nvidia.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Tahsin Erdogan authored
commit 75df6e68 upstream. When reading data from trace_pipe, tracing_wait_pipe() performs a check to see if tracing has been turned off after some data was read. Currently, this check always looks at global trace state, but it should be checking the trace instance where trace_pipe is located at. Because of this bug, cat instances/i1/trace_pipe in the following script will immediately exit instead of waiting for data: cd /sys/kernel/debug/tracing echo 0 > tracing_on mkdir -p instances/i1 echo 1 > instances/i1/tracing_on echo 1 > instances/i1/events/sched/sched_process_exec/enable cat instances/i1/trace_pipe Link: http://lkml.kernel.org/r/20170917102348.1615-1-tahsin@google.com Fixes: 10246fa3 ("tracing: give easy way to clear trace buffer") Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Signed-off-by:
-
Paul Mackerras authored
commit 47c5310a upstream, with part of commit edd03602 folded in. Nixiaoming pointed out that there is a memory leak in kvm_vm_ioctl_create_spapr_tce() if the call to anon_inode_getfd() fails; the memory allocated for the kvmppc_spapr_tce_table struct is not freed, and nor are the pages allocated for the iommu tables. David Hildenbrand pointed out that there is a race in that the function checks early on that there is not already an entry in the stt->iommu_tables list with the same LIOBN, but an entry with the same LIOBN could get added between then and when the new entry is added to the list. This fixes both problems. To simplify things, we now call anon_inode_getfd() before placing the new entry in the list. The check for an existing entry is done while holding the kvm->lock mutex, immediately before adding the new entry to the list. [paulus@ozlabs.org - folded in that part of edd03602 ("KVM: PPC: Book3S HV: Protect updates to spapr_tce_tables list", 2017-08-28) which restructured the code that 47c5310a modified, to avoid a build failure caused by the absence of put_unused_fd(). Also removed the locked memory accounting, since it doesn't exist in this version, and adjusted the commit message.] Fixes: 54738c09 ("KVM: PPC: Accelerate H_PUT_TCE by implementing it in real mode") Reported-by:
Nixiaoming <nixiaoming@huawei.com> Reported-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Avraham Stern authored
commit 6e46d8ce upstream. When HW ROC is supported it is possible that after the HW notified that the ROC has started, the ROC was cancelled and another ROC was added while the hw_roc_start worker is waiting on the mutex (since cancelling the ROC and adding another one also holds the same mutex). As a result, the hw_roc_start worker will continue to run after the new ROC is added but before it is actually started by the HW. This may result in notifying userspace that the ROC has started before it actually does, or in case of management tx ROC, in an attempt to tx while not on the right channel. In addition, when the driver will notify mac80211 that the second ROC has started, mac80211 will warn that this ROC has already been notified. Fix this by flushing the hw_roc_start work before cancelling an ROC. Signed-off-by:
Avraham Stern <avraham.stern@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Shu Wang authored
commit f5c4ba81 upstream. There is a race that cause cifs reconnect in cifs_mount, - cifs_mount - cifs_get_tcp_session - [ start thread cifs_demultiplex_thread - cifs_read_from_socket: -ECONNABORTED - DELAY_WORK smb2_reconnect_server ] - cifs_setup_session - [ smb2_reconnect_server ] auth_key.response was allocated in cifs_setup_session, and will release when the session destoried. So when session re- connect, auth_key.response should be check and released. Tested with my system: CIFS VFS: Free previous auth_key.response = ffff8800320bbf80 A simple auth_key.response allocation call trace: - cifs_setup_session - SMB2_sess_setup - SMB2_sess_auth_rawntlmssp_authenticate - build_ntlmssp_auth_blob - setup_ntlmv2_rsp Signed-off-by:
Shu Wang <shuwang@redhat.com> Signed-off-by:
-
- 27 Sep, 2017 18 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt (VMware) authored
commit edb096e0 upstream. If function tracing is disabled by the user via the function-trace option or the proc sysctl file, and a ftrace_ops that was allocated on the heap is unregistered, then the shutdown code exits out without doing the proper clean up. This was found via kmemleak and running the ftrace selftests, as one of the tests unregisters with function tracing disabled. # cat kmemleak unreferenced object 0xffffffffa0020000 (size 4096): comm "swapper/0", pid 1, jiffies 4294668889 (age 569.209s) hex dump (first 32 bytes): 55 ff 74 24 10 55 48 89 e5 ff 74 24 18 55 48 89 U.t$.UH...t$.UH. e5 48 81 ec a8 00 00 00 48 89 44 24 50 48 89 4c .H......H.D$PH.L backtrace: [<ffffffff81d64665>] kmemleak_vmalloc+0x85/0xf0 [<ffffffff81355631>] __vmalloc_node_range+0x281/0x3e0 [<ffffffff8109697f>] module_alloc+0x4f/0x90 [<ffffffff81091170>] arch_ftrace_update_trampoline+0x160/0x420 [<ffffffff81249947>] ftrace_startup+0xe7/0x300 [<ffffffff81249bd2>] register_ftrace_function+0x72/0x90 [<ffffffff81263786>] trace_selftest_ops+0x204/0x397 [<ffffffff82bb8971>] trace_selftest_startup_function+0x394/0x624 [<ffffffff81263a75>] run_tracer_selftest+0x15c/0x1d7 [<ffffffff82bb83f1>] init_trace_selftests+0x75/0x192 [<ffffffff81002230>] do_one_initcall+0x90/0x1e2 [<ffffffff82b7d620>] kernel_init_freeable+0x350/0x3fe [<ffffffff81d61ec3>] kernel_init+0x13/0x122 [<ffffffff81d72c6a>] ret_from_fork+0x2a/0x40 [<ffffffffffffffff>] 0xffffffffffffffff Fixes: 12cce594 ("ftrace/x86: Allow !CONFIG_PREEMPT dynamic ops to use allocated trampolines") Signed-off-by:
-
Michael Lyle authored
commit 9276717b upstream. Most importantly, solve a crash where %llu was used to format signed numbers. This would cause a buffer overflow when reading sysfs writeback_rate_debug, as only 20 bytes were allocated for this and %llu writes 20 characters plus a null. Always use the units mechanism rather than having different output paths for simplicity. Also, correct problems with display output where 1.10 was a larger number than 1.09, by multiplying by 10 and then dividing by 1024 instead of dividing by 100. (Remainders of >= 1000 would print as .10). Minor changes: Always display the decimal point instead of trying to omit it based on number of digits shown. Decide what units to use based on 1000 as a threshold, not 1024 (in other words, always print at most 3 digits before the decimal point). Signed-off-by:
Michael Lyle <mlyle@lyle.org> Reported-by:
Dmitry Yu Okunev <dyokunev@ut.mephi.ru> Acked-by:
Kent Overstreet <kent.overstreet@gmail.com> Reviewed-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Tang Junhui authored
commit 9baf3097 upstream. gc and write-back get raced (see the email "bcache get stucked" I sended before): gc thread write-back thread | |bch_writeback_thread() |bch_gc_thread() | | |==>read_dirty() |==>bch_btree_gc() | |==>btree_root() //get btree root | | //node write locker | |==>bch_btree_gc_root() | | |==>read_dirty_submit() | |==>write_dirty() | |==>continue_at(cl, | | write_dirty_finish, | | system_wq); | |==>write_dirty_finish()//excute | | //in system_wq | |==>bch_btree_insert() | |==>bch_btree_map_leaf_nodes() | |==>__bch_btree_map_nodes() | |==>btree_root //try to get btree | | //root node read | | //lock | |-----stuck here |==>bch_btree_set_root() |==>bch_journal_meta() |==>bch_journal() |==>journal_try_write() |==>journal_write_unlocked() //journal_full(&c->journal) | //condition satisfied |==>continue_at(cl, journal_write, system_wq); //try to excute | //journal_write in system_wq | //but work queue is excuting | //write_dirty_finish() |==>closure_sync(); //wait journal_write execute | //over and wake up gc, |-------------stuck here |==>release root node write locker This patch alloc a separate work-queue for write-back thread to avoid such race. (Commit log re-organized by Coly Li to pass checkpatch.pl checking) Signed-off-by:
Tang Junhui <tang.junhui@zte.com.cn> Acked-by:
-
Tony Asleson authored
commit 77fa100f upstream. If you encounter any errors in bch_cached_dev_attach it will return a negative error code. The variable 'v' which stores the result is unsigned, thus user space sees a very large value returned for bytes written which can cause incorrect user space behavior. Utilize 1 signed variable to use throughout the function to preserve error return capability. Signed-off-by:
Tony Asleson <tasleson@redhat.com> Acked-by:
-
Tang Junhui authored
commit a8394090 upstream. __update_write_rate() uses a Proportion-Differentiation Controller algorithm to control writeback rate. A dirty target number is used in this PD controller to control writeback rate. A larger target number will make the writeback rate smaller, on the versus, a smaller target number will make the writeback rate larger. bcache uses the following steps to calculate the target number, 1) cache_sectors = all-buckets-of-cache-set * buckets-size 2) cache_dirty_target = cache_sectors * cached-device-writeback_percent 3) target = cache_dirty_target * (sectors-of-cached-device/sectors-of-all-cached-devices-of-this-cache-set) The calculation at step 1) for cache_sectors is incorrect, which does not consider dirty blocks occupied by flash only volume. A flash only volume can be took as a bcache device without cached device. All data sectors allocated for it are persistent on cache device and marked dirty, they are not touched by bcache writeback and garbage collection code. So data blocks of flash only volume should be ignore when calculating cache_sectors of cache set. Current code does not subtract dirty sectors of flash only volume, which results a larger target number from the above 3 steps. And in sequence the cache device's writeback rate is smaller then a correct value, writeback speed is slower on all cached devices. This patch fixes the incorrect slower writeback rate by subtracting dirty sectors of flash only volumes in __update_writeback_rate(). (Commit log composed by Coly Li to pass checkpatch.pl checking) Signed-off-by:
-
Tang Junhui authored
commit 69daf03a upstream. Since bypassed IOs use no bucket, so do not subtract sectors_to_gc to trigger gc thread. Signed-off-by:
Eric Wheeler <bcache@linux.ewheeler.net> Reviewed-by:
-
Jan Kara authored
commit 4b758df2 upstream. If blkdev_get_by_path() in register_bcache() fails, we try to lookup the block device using lookup_bdev() to detect which situation we are in to properly report error. However we never drop the reference returned to us from lookup_bdev(). Fix that. Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
-
Tang Junhui authored
commit 175206cf upstream. bcache uses a Proportion-Differentiation Controller algorithm to control writeback rate to cached devices. In the PD controller algorithm, dirty stripes of thin flash device should not be counted in, because flash only volumes never write back dirty data. Currently dirty stripe counter for thin flash device is not initialized when the thin flash device starts. Which means the following calculation in PD controller will reference an undefined dirty stripes number, and all cached devices attached to the same cache set where the thin flash device lies on may have an inaccurate writeback rate. This patch calles bch_sectors_dirty_init() in flash_dev_run(), to correctly initialize dirty stripe counter when the thin flash device starts to run. This patch also does following parameter data type change, -void bch_sectors_dirty_init(struct cached_dev *dc); +void bch_sectors_dirty_init(struct bcache_device *); to call this function conveniently in flash_dev_run(). (Commit log is composed by Coly Li) Signed-off-by:
-
Guenter Roeck authored
commit 7e09f7d5 upstream. The size of uvc_control_mapping is user controlled leading to a potential heap overflow in the uvc driver. This adds a check to verify the user provided size fits within the bounds of the defined buffer size. Originally-from: Richard Simmons <rssimmo@amazon.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Daniel Mentz authored
commit 9c7ba1d7 upstream. Certain syscalls like recvmmsg support 64 bit timespec values for the X32 ABI. The helper function compat_put_timespec converts a timespec value to a 32 bit or 64 bit value depending on what ABI is used. The v4l2 compat layer, however, is not designed to support 64 bit timespec values and always uses 32 bit values. Hence, compat_put_timespec must not be used. Without this patch, user space will be provided with bad timestamp values from the VIDIOC_DQEVENT ioctl. Also, fields of the struct v4l2_event32 that come immediately after timestamp get overwritten, namely the field named id. Fixes: 81993e81 ("compat: Get rid of (get|put)_compat_time(val|spec)") Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Tiffany Lin <tiffany.lin@mediatek.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Daniel Mentz <danielmentz@google.com> Signed-off-by:
-
Aleksandr Bezzubikov authored
commit 48b79a14 upstream. An SHPC may generate MSIs to notify software about slot or controller events (SHPC spec r1.0, sec 4.7). A PCI device can only generate an MSI if it has bus mastering enabled. Enable bus mastering if the bridge contains an SHPC that uses MSI for event notifications. Signed-off-by:
Aleksandr Bezzubikov <zuban32s@gmail.com> [bhelgaas: changelog] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Marcel Apfelbaum <marcel@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Jose Abreu authored
commit 1ee55a8f upstream. I recently came upon a scenario where I would get a double fault machine check exception tiriggered by a kernel module. However the ensuing crash stacktrace (ksym lookup) was not working correctly. Turns out that machine check auto-disables MMU while modules are allocated in kernel vaddr spapce. This patch re-enables the MMU before start printing the stacktrace making stacktracing of modules work upon a fatal exception. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Reviewed-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> [vgupta: moved code into low level handler to avoid in 2 places] Signed-off-by:
-
Baohong Liu authored
commit 170b3b10 upstream. Currently trace_clock timestamps are applied to both regular and max buffers only for global trace. For instance trace, trace_clock timestamps are applied only to regular buffer. But, regular and max buffers can be swapped, for example, following a snapshot. So, for instance trace, bad timestamps can be seen following a snapshot. Let's apply trace_clock timestamps to instance max buffer as well. Link: http://lkml.kernel.org/r/ebdb168d0be042dcdf51f81e696b17fabe3609c1.1504642143.git.tom.zanussi@linux.intel.com Fixes: 277ba044 ("tracing: Add interface to allow multiple trace buffers") Signed-off-by:
Baohong Liu <baohong.liu@intel.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 46320a6a upstream. In the second iteration of trace_selftest_ops(), the error goto label is wrong in the case where trace_selftest_test_global_cnt is off. In the case of error, it leaks the dynamic ops that was allocated. Fixes: 95950c2e ("ftrace: Add self-tests for multiple function trace users") Signed-off-by:
-
Dan Carpenter authored
commit e6f77540 upstream. The value of "size" comes from the user. When we add "start + size" it could lead to an integer overflow bug. It means we vmalloc() a lot more memory than we had intended. I believe that on 64 bit systems vmalloc() can succeed even if we ask it to allocate huge 4GB buffers. So we would get memory corruption and likely a crash when we call ha->isp_ops->write_optrom() and ->read_optrom(). Only root can trigger this bug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194061 Fixes: b7cc176c ("[SCSI] qla2xxx: Allow region-based flash-part accesses.") Reported-by:
shqking <shqking@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hannes Reinecke authored
commit 3e009749 upstream. When calling SG_GET_REQUEST_TABLE ioctl only a half-filled table is returned; the remaining part will then contain stale kernel memory information. This patch zeroes out the entire table to avoid this issue. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Reinecke authored
commit 4759df90 upstream. Factor out sg_fill_request_table() for better readability. [mkp: typos, applied by hand] Signed-off-by:
-
