- 03 Dec, 2020 40 commits
-
-
Hans Verkuil authored
Add 'struct' to clarify that these are pointers to structs. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Hans Verkuil authored
Drop the 'bullets' for the HEVC stateless codec documentation. It doesn't work, and they just show up as asterisks. Signed-off-by:
-
Hans Verkuil authored
Move the documentation for the stateless FWHT codec to ext-ctrls-codec-stateless.rst since that is the proper place for the stable stateless API documentation. Signed-off-by:
-
Hans Verkuil authored
The FWHT stateless 'uAPI' was staging and marked explicitly in the V4L2 specification that it will change and is unstable. Note that these control IDs were never exported as a public API, they were only defined in kernel-local headers (fwht-ctrls.h). Now, the FWHT stateless controls is ready to be part of the stable uAPI. While not too late: - Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS. - Move the contents of fwht-ctrls.h to v4l2-controls.h. - Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h to v4l2-controls.h. - Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation. - Add p_fwht_params to struct v4l2_ext_control. Signed-off-by:
-
Hans Verkuil authored
The FWHT stateless 'uAPI' was staging and marked explicitly in the V4L2 specification that it will change and is unstable. Note that these control IDs were never exported as a public API, they were only defined at the driver's code. While not too late, let's rename them is preparation for promoting the stateless FWHT codec API as a public API. Signed-off-by:
-
Hans Verkuil authored
The v4l2_area struct was not documented in the media documentation, which meant that references to that struct elsewhere in the documentation never linked to anything. [mchehab: remove .. cssclass:: longtable] Signed-off-by:
-
Helen Koike authored
Fix warnings from make htmlddocs: Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-params (if the link has no caption the label must precede a section header) Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-meta-fmt-rk-isp1-stat-3a (if the link has no caption the label must precede a section header) Fixes: df22026a ("media: videodev2.h, v4l2-ioctl: add rkisp1 meta buffer format") Signed-off-by:
Helen Koike <helen.koike@collabora.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Ezequiel Garcia authored
Now that we've destaged the H264 stateless codec controls, and with all the pieces in place, update the documentation and move it to its own section. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
The H.264 stateless 'uAPI' was staging and marked explicitly in the V4L2 specification that it will change and is unstable. Note that these control IDs were never exported as a public API, they were only defined in kernel-local headers (h264-ctrls.h). Now, the H264 stateless controls is ready to be part of the stable uAPI. While not too late, let's rename them and re-number their control IDs, moving them to the newly created stateless control class, and updating all the drivers accordingly. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Ezequiel Garcia authored
For now, only print the type of the control. In the future, we might want to be able to print the values of all the stateless codec controls currently set in the control handler, which should be useful for debugging reasons. Signed-off-by:
-
Ezequiel Garcia authored
Move the H264 stateless control types out of staging, and re-number them to avoid any confusion. Signed-off-by:
-
Ezequiel Garcia authored
When V4L2_CTRL_TYPE_H264_PRED_WEIGHTS was added, adding a replace symbol directive in videodev2.h.rst.exceptions was missed. Now that the control type is destaged, it's important to fix this. Signed-off-by:
-
Ezequiel Garcia authored
Since we are ready to stabilize the H264 stateless API, start by first moving the parsed H264 pixel format. Signed-off-by:
-
Ezequiel Garcia authored
Add a new control class to hold the stateless codecs controls that are ready to be moved out of staging. Signed-off-by:
-
Ezequiel Garcia authored
Check that all the fields that correspond or are related to a H264 specification syntax element have legal values. Signed-off-by:
-
Ezequiel Garcia authored
Avoid including h264-ctrls.h, vp8-ctrls.h, etc, and instead just include v4l2-ctrls.h which does the right thing. This is in preparation for moving the stateless controls out of staging, which will mean removing some of these headers. Signed-off-by:
-
Ezequiel Garcia authored
For historical reasons, stateful codec controls are named as {}_MPEG_{}. While we can't at this point sanely change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER), we can least change the more meaningful macros such as classes macros. Signed-off-by: -
Ezequiel Garcia authored
Cedrus supports H.264 profiles from Baseline to High, except for the Extended profile Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE so that userspace can query the driver for the supported profiles and levels. Signed-off-by:
-
Jonas Karlman authored
The Rockchip Video Decoder used in RK3399 supports H.264 profiles from Baseline to High 4:2:2 up to Level 5.1, except for the Extended profile. Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE and the V4L2_CID_MPEG_VIDEO_H264_LEVEL control, so that userspace can query the driver for the list of supported profiles and level. For now, we don't expose 4:2:2 since the driver doesn't implement the required support. [Ezequiel: Don't expose 4:2:2 profile for now] Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Ezequiel Garcia authored
Add a debug message for control validation (validate_new) failures. This is useful to debug issues with ioctls such as VIDIOC_TRY_EXT_CTRLS and VIDIOC_S_EXT_CTRLS. Signed-off-by:
-
Hans Verkuil authored
V4L2_CTRL_CLASS_DETECT was never documented here, add it. Signed-off-by:
-
Ezequiel Garcia authored
The VP8_FRAME_HEADER control type is validated, so it needs a corresponding initialization to produce default legal values. For now, only add the minimum required initialization to satisfy current validation. Signed-off-by:
-
Sakari Ailus authored
Use regulators vio and vcore besides vana. The regulators were always there but on many boards they've been hard wired. Control them explicitly now. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
Vcore and vio supplies are also part of the spec and used by many sensors. Do not specify the voltages as they are generally sensor dependent. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
It was mentioned vana voltage is typically 2,8 volts. This is truly sensor dependent, and nowadays 2,8 volts is a lot. Signed-off-by:
-
Sakari Ailus authored
SMIA nor CCS need these delays; remove them. Signed-off-by:
-
Sakari Ailus authored
Longer idle period is required on I²C bus before the first transaction after lifting xshutdown. Signed-off-by:
-
Sakari Ailus authored
Over the years (and renaming) some lines that may well be wrapped ended up being over 80 characters, likewise there are shorter lines that can be merged. Do that. Signed-off-by:
-
Sakari Ailus authored
If pm_runtime_get_sync() fails, there's no need to set the device active again. Also, in the same case to return the usage_count to zero, pm_runtime_put_noidle() is enough. Signed-off-by:
-
Sakari Ailus authored
Access read-only registers from CCS static data. Signed-off-by:
-
Sakari Ailus authored
Write manufacturer specific registers (MSRs) from file to the sensor on sensor power-on. Signed-off-by:
-
Sakari Ailus authored
Make the delay between I²C access retries a range between 1 and 2 ms. Also make the number of retries 10 instead of 5, in order not to reduce the total amount of time. Signed-off-by:
-
Sakari Ailus authored
Use my @linux.intel.com e-mail address in the CCS driver. Signed-off-by:
-
Sakari Ailus authored
Change MODULE_LICENSE to "GPL v2" as indicated by the SPDX tag. Signed-off-by:
-
Sakari Ailus authored
MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new features while existing functionality will be supported. Rename the smiapp-pll as ccs-pll accordingly. Also add Intel copyright to the files. Signed-off-by:
-
Sakari Ailus authored
Some limit values are available in q16.q16 format, referred to as 32-bit unsigned ireal in CCS. Read these correctly. Signed-off-by:
-
Sakari Ailus authored
Instead of converting the limit values at register read time, do that at access time instead. Signed-off-by:
-
Sakari Ailus authored
The limit values will be raw soon, and the conversion takes place later on. Prepare for that. Signed-off-by:
-
Sakari Ailus authored
Rework quirk and 8-bit only access functions with a single function that takes arguments. This is later extensible to support yet more flags. Signed-off-by:
-
Sakari Ailus authored
If an internal driver error was encountered, BUG was issued. Instead, do less harsh WARN_ON_ONCE and try to manage with the consequences. Signed-off-by:
-
