- 31 Jan, 2022 11 commits
-
-
Giovanni Cabiddu authored
The logic that detects, enables and disables pfvf interrupts was expecting a single CSR per VF. Instead, the source and mask register are two registers with a bit per VF. Due to this, the driver is reading and setting reserved CSRs and not masking the correct source of interrupts. Fix the access to the source and mask register for QAT GEN4 devices by removing the outer loop in adf_gen4_get_vf2pf_sources(), adf_gen4_enable_vf2pf_interrupts() and adf_gen4_disable_vf2pf_interrupts() and changing the helper macros ADF_4XXX_VM2PF_SOU and ADF_4XXX_VM2PF_MSK. Fixes: a9dc0d96 ("crypto: qat - add PFVF support to the GEN4 host driver") Signed-off-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Co-developed-by:
Siming Wan <siming.wan@intel.com> Signed-off-by:
Xin Zeng <xin.zeng@intel.com> Reviewed-by:
Wojciech Ziemba <wojciech.ziemba@intel.com> Reviewed-by:
Marco Chiappero <marco.chiappero@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Kevin Bracey authored
It makes no sense to leave crc32_be using the generic code while we only accelerate the little-endian ops. Even though the big-endian form doesn't fit as smoothly into the arm64, we can speed it up and avoid hitting the D cache. Tested on Cortex-A53. Without acceleration: crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 crc32: self tests passed, processed 225944 bytes in 192240 nsec crc32c: CRC_LE_BITS = 64 crc32c: self tests passed, processed 112972 bytes in 21360 nsec With acceleration: crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 crc32: self tests passed, processed 225944 bytes in 53480 nsec crc32c: CRC_LE_BITS = 64 crc32c: self tests passed, processed 112972 bytes in 21480 nsec Signed-off-by:Kevin Bracey <kevin@bracey.fi> Tested-by:
Ard Biesheuvel <ardb@kernel.org> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kevin Bracey authored
crc32c_le self test had a stray multiply by two inherited from the crc32_le+crc32_be test loop. Signed-off-by:
-
Kevin Bracey authored
crc32_le and __crc32c_le can be overridden - extend this to crc32_be. Signed-off-by:
-
Kevin Bracey authored
Casts were added in commit 8f243af4 ("sections: fix const sections for crc32 table") to cope with the tables not being const. They are no longer required since commit f5e38b92 ("lib: crc32: constify crc32 lookup table"). Signed-off-by:
-
Herbert Xu authored
In addition to sha256 we must also enable hmac for the kdf self-test to work. Reported-by:
kernel test robot <oliver.sang@intel.com> Fixes: 304b4ace ("crypto: kdf - select SHA-256 required...") Fixes: 026a733e ("crypto: kdf - add SP800-108 counter key...") Signed-off-by:
-
Corentin Labbe authored
When adding hashes support to sun8i-ss, I have added them only on A83T. But I forgot that 0 is a valid algorithm ID, so hashes are enabled on A80 but with an incorrect ID. Anyway, even with correct IDs, hashes do not work on A80 and I cannot find why. So let's disable all of them on A80. Fixes: d9b45418 ("crypto: sun8i-ss - support hash algorithms") Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Nathan Huckleberry authored
Use SPDX-License-Identifier instead of a verbose license text and update external link. Cc: James Guilford <james.guilford@intel.com> Cc: Sean Gulley <sean.m.gulley@intel.com> Cc: Chandramouli Narayanan <mouli@linux.intel.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
-
Herbert Xu authored
As testmgr is part of cryptomgr which was designed to be unloadable as a module, it shouldn't export any symbols for other crypto modules to use as that would prevent it from being unloaded. All its functionality is meant to be accessed through notifiers. The symbol crypto_simd_disabled_for_test was added to testmgr which caused it to be pinned as a module if its users were also loaded. This patch moves it out of testmgr and into crypto/algapi.c so cryptomgr can again be unloaded and replaced on demand. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Geert Uytterhoeven authored
The Cavium ThunderX Random Number Generator is only present on Cavium ThunderX SoCs, and not available as an independent PCIe endpoint. Hence add a dependency on ARCH_THUNDER, to prevent asking the user about this driver when configuring a kernel without Cavium Thunder SoC support. Fixes: cc2f1908 ("hwrng: cavium - Add Cavium HWRNG driver for ThunderX SoC.") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Minghao Chi authored
Return value from ccp_crypto_enqueue_request() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
-
- 28 Jan, 2022 12 commits
-
-
Dan Carpenter authored
The "ret" variable needs to be signed or there is an error message which will not be printed correctly. Fixes: 0cec19c7 ("crypto: qat - add support for compression for 4xxx") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
Peter Gonda authored
Initialize psp_ret inside of __sev_platform_init_locked() because there are many failure paths with PSP initialization that do not set __sev_do_cmd_locked(). Fixes: e423b9d7: ("crypto: ccp - Move SEV_INIT retry for corrupted data") Signed-off-by:
Peter Gonda <pgonda@google.com> Reported-by:
-
Tianjia Zhang authored
tcrypt supports testing of SM3 hash algorithms that use AVX instruction acceleration. In order to add the sm3 asynchronous test to the appropriate position, shift the testcase sequence number of the multi buffer backward and start from 450. Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
-
Tianjia Zhang authored
This patch adds AVX assembly accelerated implementation of SM3 secure hash algorithm. From the benchmark data, compared to pure software implementation sm3-generic, the performance increase is up to 38%. The main algorithm implementation based on SM3 AES/BMI2 accelerated work by libgcrypt at: https://gnupg.org/software/libgcrypt/index.html Benchmark on Intel i5-6200U 2.30GHz, performance data of two implementations, pure software sm3-generic and sm3-avx acceleration. The data comes from the 326 mode and 422 mode of tcrypt. The abscissas are different lengths of per update. The data is tabulated and the unit is Mb/s: update-size | 16 64 256 1024 2048 4096 8192 ------------+------------------------------------------------------- sm3-generic | 105.97 129.60 182.12 189.62 188.06 193.66 194.88 sm3-avx | 119.87 163.05 244.44 260.92 257.60 264.87 265.88 Signed-off-by:
-
Tianjia Zhang authored
SM3 generic library is stand-alone implementation, it is necessary making the sm3-generic implementation to depends on SM3 library. The functions crypto_sm3_*() provided by sm3_generic is no longer exported. Signed-off-by:
-
Tianjia Zhang authored
SM3 generic library is stand-alone implementation, it is necessary for the calculation of sm2 z digest to depends on SM3 library instead of sm3-generic. Signed-off-by:
-
Tianjia Zhang authored
SM3 generic library is stand-alone implementation, sm3-ce can depend on the SM3 library instead of sm3-generic. Signed-off-by:
-
Tianjia Zhang authored
Stand-alone implementation of the SM3 algorithm. It is designed to have as little dependencies as possible. In other cases you should generally use the hash APIs from include/crypto/hash.h. Especially when hashing large amounts of data as those APIs may be hw-accelerated. In the new SM3 stand-alone library, sm3_transform() has also been optimized, instead of simply using the code in sm3_generic. Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Kai Ye authored
Update documentation describing DebugFS for function's QoS limiting. Signed-off-by:
Kai Ye <yekai13@huawei.com> Signed-off-by:
-
Kai Ye authored
Update documentation describing DebugFS for function's QoS limiting. Signed-off-by:
-
Kai Ye authored
Update documentation describing DebugFS for function's QoS limiting. Signed-off-by:
-
Kai Ye authored
Use the tabs on all Hisilicon Accelerator documentation. including hpre, sec, zip. Signed-off-by:
-
- 23 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 11 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
Masahiro Yamada authored
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by:
-
