- 26 Apr, 2016 17 commits
-
-
Tom Herbert authored
Change model of xlat to be used only for input where lookup is done on the locator part of an address (comparing to locator_match as key in rhashtable). This is needed for checksum neutral translation which obfuscates the low order 16 bits of the identifier. It also permits hosts to be in muliple ILA domains (each locator can map to a different SIR address). A check is also added to disallow translating non-ILA addresses (check of type in identifier). Signed-off-by:
Tom Herbert <tom@herbertland.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tom Herbert authored
Add structures for identifiers, locators, and an ila address which is composed of a locator and identifier and in6_addr can be cast to it. This includes a three bit type field and enums for the types defined in ILA I-D. In ILA lwt don't allow user to set a translation for a non-ILA address (type of identifier is zero meaning it is an IID). This also requires that the destination prefix is at least 65 bytes (64 bit locator and first byte of identifier). Signed-off-by:
-
Julia Lawall authored
The first argument of pci_free_consistent has type struct pci_dev *, so use NULL instead of 0. The semantic patch that performs this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ @@ pci_free_consistent( - 0 + NULL , ...) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
David S. Miller authored
Yisen Zhuang says: ==================== net: hns: add support of debug dsaf device There are two kinds of dsaf device in hns, one is for service ports, contains crossbar in it, can work under different mode. Another is for debug port, only can work under single port mode. The current code only declares a dsaf device for both service ports and debug ports.It is not so readability. This patch separates it to three platform devices to make the code more simple and readability. The diagram of all port in one platform device(old): CPU | | DSAF(one platform device) -------------------------------------------------------------- / | | | | | / | PPE PPE PPE | / | | | | | / | | | | | / | crossbar | | | / | | | | |/ | ----------------------------------- | | | | | | | | | | | | | | | | | | | | | | | | MAC MAC MAC MAC MAC MAC MAC MAC | | | | | | | | | | | -------------------------------------------------------------- | | | | | | | | PHY PHY PHY PHY PHY PHY PHY PHY The diagram of separating ports to three platform(new): CPU | ----------------------------------- | | | ---------------------------------------------- --------- --------- | | | | | | | | | PPE | | PPE | | PPE | | | | | | | | | | | | | | | | | | | | crossbar | | | | | | | | | | | | | | | | | ---------------------------------- | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MAC MAC MAC MAC MAC MAC | | MAC | | MAC | | | | | | | | | | | | | | | ---------------------------------------------- --------- --------- | | | | | | \ / | / | PHY PHY PHY PHY PHY PHY \ / PHY / PHY \ / / \ / / DSAF(three platform device) We take the compatibility into consideration, and it works well by using the old dts file(tested on d02 board). For more details, please see individual patches. ==================== Signed-off-by: -
Yisen.Zhuang\(Zhuangyuzeng\) authored
Because debug dsaf port was separated from service dsaf port, this patch updates the related configurations of hns dts, changes it to match with the new binding files. This also removes enet nodes which don't exist in d02 board. Signed-off-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
This patch adds description for port-idx-in-ae attribute. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Because debug dsaf port was separated from service dsaf port, this patch updates the related information of DT binding. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Port mode offset for each dsaf port is different. The current code is not so readability. This patch adds configuration named port-mode-offset to make the code simple and more readability. If port-mode-offset isn't exists, default value 0 will be used. Signed-off-by:
Daode Huang <huangdaode@hisilicon.com> Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
The reset offset for each port in a dsaf is different. The current code is not so readability. This patch adds configuration named port-rst-offset to make the code simple and more readability. If this attribute doesn't exist, default value of this attribute is equal to its port index. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
This patch adds attribute cpld_ctrl for dsaf port node, parses the syscon for mac_cb from dts, and changes the method of access the cpld related registers through syscon. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
There are two kinds of dsaf device in hns, one is for service ports, contains crossbar in it, can work under different mode. Another is for debug port, only can work under "single-port" mode. The current code only declared a dsaf device for both service ports and debug ports. This patch separate it to three platform devices. Here is the diagram of all port in one platform device(old): CPU | | DSAF(one platform device) -------------------------------------------------------------- / | | | | | / | PPE PPE PPE | / | | | | | / | | | | | / | crossbar | | | / | | | | |/ | ----------------------------------- | | | | | | | | | | | | | | | | | | | | | | | | MAC MAC MAC MAC MAC MAC MAC MAC | | | | | | | | | | | -------------------------------------------------------------- | | | | | | | | PHY PHY PHY PHY PHY PHY PHY PHY Here is the diagram of separate all ports to three platform(new): CPU | ----------------------------------- | | | ---------------------------------------------- --------- --------- | | | | | | | | | PPE | | PPE | | PPE | | | | | | | | | | | | | | | | | | | | crossbar | | | | | | | | | | | | | | | | | ---------------------------------- | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MAC MAC MAC MAC MAC MAC | | MAC | | MAC | | | | | | | | | | | | | | | ---------------------------------------------- --------- --------- | | | | | | \ / | / | PHY PHY PHY PHY PHY PHY \ / PHY / PHY \ / / \ / / DSAF(three platform device) Signed-off-by: -
Daode Huang authored
This patch tunes the header file by the alphabetical order. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
This patch provides the read/write function for dsaf to access the registers through syscon methods. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
Add the subctrl reset offset for dsaf, this property is used to reset xge/ge ports for different dsaf. If this attribute is not present, default value 0 will be used. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
This patch parse port-idx-in-ae in enet node. In NIC mode of DSAF, all 6 PHYs of service DSAF are taken as ethernet ports to the CPU. The port-idx-in-ae can be 0 to 5. Here is the diagram: +-----+---------------+ | CPU | +-+-+-+---+-+-+-+-+-+-+ | | | | | | | | debug debug service port port port (0) (0) (0-5) In Switch mode of DSAF, all 6 PHYs of service DSAF are taken as physical ports connect to a LAN Switch while the CPU side assume itself have one single NIC connect to this switch. In this case, the port-idx-in-ae will be 0 only. +-----+-----+------+------+ | CPU | +-+-+-+-+-+-+-+-+-+-+-+-+-+ | | service| port(0) debug debug +------------+ port port | switch | (0) (0) +-+-+-+-+-+-++ | | | | | | external port when port-idx-in-ae is not exists, old attribute port-id will be used (only for compatible purpose, not recommended to use port-id in new code). Signed-off-by: -
Daode Huang authored
As debug ports are moved from service dsaf to debug dsaf, the interrupts offset should start from 0, So this patch re-defines the offset index of debug ports. Signed-off-by:
-
Yisen.Zhuang\(Zhuangyuzeng\) authored
This patch adds a new dsaf mode named "single-port" mode for debug port. This mode only contains one debug port. This patch also changes the method of distinguishing the port type. Signed-off-by:
-
- 25 Apr, 2016 23 commits
-
-
David S. Miller authored
Sowmini Varadhan says: ==================== pskb_extract() helper function. This patchset follows up on the discussion in https://www.mail-archive.com/netdev@vger.kernel.org/msg105090.html For RDS-TCP, we have to deal with the full gamut of nonlinear sk_buffs, including all the frag_list variants. Also, the parent skb has to remain unchanged, while the clone is queued for Rx on the PF_RDS socket. Patch 1 of this patchset adds a pskb_extract() function that does all this without the redundant memcpy's in pskb_expand_head() and __pskb_pull_tail(). v2: Marcelo Leitner review comments ==================== Signed-off-by:
-
Sowmini Varadhan authored
rds-stress experiments with request size 256 bytes, 8K acks, using 16 threads show a 40% improvment when pskb_extract() replaces the {skb_clone(..); pskb_pull(..); pskb_trim(..);} pattern in the Rx path, so we leverage the perf gain with this commit. Signed-off-by:Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
-
Sowmini Varadhan authored
A pattern of skb usage seen in modules such as RDS-TCP is to extract `to_copy' bytes from the received TCP segment, starting at some offset `off' into a new skb `clone'. This is done in the ->data_ready callback, where the clone skb is queued up for rx on the PF_RDS socket, while the parent TCP segment is returned unchanged back to the TCP engine. The existing code uses the sequence clone = skb_clone(..); pskb_pull(clone, off, ..); pskb_trim(clone, to_copy, ..); with the intention of discarding the first `off' bytes. However, skb_clone() + pskb_pull() implies pksb_expand_head(), which ends up doing a redundant memcpy of bytes that will then get discarded in __pskb_pull_tail(). To avoid this inefficiency, this commit adds pskb_extract() that creates the clone, and memcpy's only the relevant header/frag/frag_list to the start of `clone'. pskb_trim() is then invoked to trim clone down to the requested to_copy bytes. Signed-off-by:
-
Michal Kazior authored
This works on the same implementation principle as codel*.h, i.e. there's a generic header with structures and macros and a implementation header carrying function definitions to include in given, e.g. driver or module. The fairness logic comes from net/sched/sch_fq_codel.c but is generalized so it is more flexible and easier to re-use. Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
-
David S. Miller authored
Michal Kazior says: ==================== codel: make it reuseable beyond qdiscs There's an ongoing effort in fixing wireless bufferbloat. As part of that fq_codel is being ported into mac80211. To prevent code duplication codel.h needs to be slightly modified before it can be used in mac80211 (or other drivers FWIW). For more background please see: https://www.spinics.net/lists/linux-wireless/msg149976.html ==================== Signed-off-by:
-
Michal Kazior authored
It was impossible to include codel.h for the purpose of having access to codel_params or codel_vars structure definitions and using them for embedding in other more complex structures. This splits allows codel.h itself to be treated like any other header file while codel_qdisc.h and codel_impl.h contain function definitions with logic that was previously in codel.h. This copies over copyrights and doesn't involve code changes other than adding a few additional include directives to net/sched/sch*codel.c. Signed-off-by:
-
Michal Kazior authored
This strips out qdisc specific bits from the code and makes it slightly more reusable. Codel will be used by wireless/mac80211 in the future. Signed-off-by:
-
Phil Sutter authored
Signed-off-by:
Phil Sutter <phil@nwl.cc> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Jiri Benc authored
Commit 751a587a ("route: fix breakage after moving lwtunnel state") moved lwtstate to the end of dst_entry for 32bit archs. This makes it share the cacheline with __refcnt which had an unkown effect on performance. For this reason, the pointer was kept in place for 64bit archs. However, later performance measurements showed this is of no concern. It turns out that every performance sensitive path that accesses lwtstate accesses also struct rtable or struct rt6_info which share the same cache line. Thus, to get rid of a few #ifdefs, move the field to the end of the struct also for 64bit. Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
David S. Miller authored
Yuval Mintz says: ==================== qed*: driver updates [Was previous termed 'eeprom access et al.', but seemed a bit inappropriate given we've dropped the eeprom patch for now. Still waiting for some inputs on that one, BTW] This patch series contains some ethtool-related enhancements. ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
The APIs for making this sort of configuration [e.g., via ethtool] are already present in qede, but the current configuration flow in qed doesn't respect it. Signed-off-by:
Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Yuval Mintz authored
There's some inconsistency in current logic determining whether the link settings of a given interface can be changed; I.e., in all modes other than the so-called `deault' mode the interfaces are forbidden from changing the configuration - but even this rule is not applied to all user APIs that may change the configuration. Instead, let the core-module [qed] decide whether an interface can change the configuration by supporting a new API function. We also revise the current rule, allowing all interfaces to change their configurations while laying the infrastructure for future modes where an interface would be blocked from making such a configuration. Signed-off-by:
-
Yuval Mintz authored
Adds a getter for the interfaces private flags. The only parameter currently supported is whether the interface is a coupled function [required for supporting 100g]. Signed-off-by:
-
Yuval Mintz authored
There's a difference in statsitics' names starting at qed and propagating to qede, where egress counters indicate ranges while ingress counters indiciate high-end. Align all statistcs to follow the same conventions - name indicates range. Signed-off-by:
-
Eric Dumazet authored
We should call consume_skb(skb) when skb is properly consumed, or kfree_skb(skb) when skb must be dropped in error case. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
We now have proper per-listener but also per network namespace counters for SYN packets that might be dropped. We replace the kfree_skb() by consume_skb() to be drop monitor [1] friendly, and remove an obsolete comment. FastOpen SYN packets can carry payload in them just fine. [1] perf record -a -g -e skb:kfree_skb sleep 1; perf report Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2016-04-25 This series contains updates to ixgbe and ixgbevf. Emil provides several patches, starting with the consolidation of the logic behind configuring spoof checking. Fixed an issue which was causing link issues for backplane devices because x550em_a/x devices did not have a default value for mac->ops.setup_link. Refactored the ethtool stats to bring the logic closer to how ixgbe handles stats and sets up per-queue stats for ixgbevf. Mark adds a new register to wait for previous register writes to complete before issuing a register read, which is needed when slower links are in use. Fixed the flow control setup for x550em_a, the incorrect fc_setup function was being used. Don added a workaround for empty SFP+ cage crosstalk, since on some systems the crosstalk could lead to link flap on empty SFP+ cages. Jake converts ixgbe and ixgbevf to use the BIT() macro. Alex Duyck adds support for partial GSO segmentation in the case of tunnels for ixgbe and ixgbevf. Then preps for HyperV by moving the API negotiation into mac_ops. Arnd Bergmann provides a fix for the ARM compile warnings in linux-next by converting the use of a udelay() to msleep(). ==================== Signed-off-by: -
David S. Miller authored
Nicolas Dichtel says: ==================== netlink: align attributes when needed (patchset #2) This is the continuation (series #2) of the work done to align netlink attributes when these attributes contain some 64-bit fields. In patch #3, I didn't modify the function ila_encap_nlsize(). I was waiting feedback for this patch: http://patchwork.ozlabs.org/patch/613766/ If it's approved, there will be an update to switch nla_total_size() to nla_total_size_64bit() after the merge of net in net-next. ==================== Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
Nicolas Dichtel authored
Signed-off-by:
-
