- 30 Oct, 2013 15 commits
-
-
Geyslan G. Bem authored
In xlog_verify_iclog a debug check of the incore log buffers prints an error if icptr is null and then goes on to dereference the pointer regardless. Convert this to an assert so that the intention is clear. This was reported by Coverty. Signed-off-by:
Ben Myers <bpm@sgi.com> Reviewed-by:
Eric Sandeen <sandeen@redhat.com>
-
Denis Efremov authored
ASSERT on args takes place after args dereference. This assertion is redundant since we are going to panic anyway. Found by Linux Driver Verification project (linuxtesting.org) - PVS-Studio analyzer. Signed-off-by:
Denis Efremov <yefremov.denis@gmail.com> Reviewed-by:
-
Dave Chinner authored
Page cache allocation doesn't always go through ->begin_write and hence we don't always get the opportunity to set the allocation context to GFP_NOFS. Failing to do this means we open up the direct relcaim stack to recurse into the filesystem and consume a significant amount of stack. On RHEL6.4 kernels we are seeing ra_submit() and generic_file_splice_read() from an nfsd context recursing into the filesystem via the inode cache shrinker and evicting inodes. This is causing truncation to be run (e.g EOF block freeing) and causing bmap btree block merges and free space btree block splits to occur. These btree manipulations are occurring with the call chain already 30 functions deep and hence there is not enough stack space to complete such operations. To avoid these specific overruns, we need to prevent the page cache allocation from recursing via direct reclaim. We can do that because the allocation functions take the allocation context from that which is stored in the mapping for the inode. We don't set that right now, so the default is GFP_HIGHUSER_MOVABLE, which is effectively a GFP_KERNEL context. We need it to be the equivalent of GFP_NOFS, so when we initialise an inode, set the mapping gfp mask appropriately. This makes the use of AOP_FLAG_NOFS redundant from other parts of the XFS IO path, so get rid of it. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Dave Chinner authored
The kbuild test robot indicated that there were some new sparse warnings in fs/xfs/xfs_dquot_buf.c. Actually, there were a lot more that is wasn't warning about, so fix them all up. Reported-by: kbuild test robot Signed-off-by:
-
Dave Chinner authored
The directory block format verifier fails to check that the leaf entry count is in a valid range, and so if it is corrupted then it can lead to derefencing a pointer outside the block buffer. While we can't exactly validate the count without first walking the directory block, we can ensure the count lands in the valid area within the directory block and hence avoid out-of-block references. Signed-off-by:
-
Dave Chinner authored
Rather than hiding the ftype field size accounting inside the dirent padding for the ".." and first entry offset functions for v2 directory formats, add explicit functions that calculate it correctly. Signed-off-by:
-
Dave Chinner authored
Many of the vectorised function calls now take no parameters and return a constant value. There is no reason for these to be vectored functions, so convert them to constants Binary sizes: text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4 789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5 789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6 791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7 791701 96802 1096 889599 d92ff fs/xfs/xfs.o.p8 791205 96802 1096 889103 d91cf fs/xfs/xfs.o.p9 Signed-off-by:
-
Dave Chinner authored
Next step in the vectorisation process is the directory free block encode/decode operations. There are relatively few of these, though there are quite a number of calls to them. Binary sizes: text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4 789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5 789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6 791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7 791701 96802 1096 889599 d92ff fs/xfs/xfs.o.p8 Signed-off-by:
-
Dave Chinner authored
Conversion from on-disk structures to in-core header structures currently relies on magic number checks. If the magic number is wrong, but one of the supported values, we do the wrong thing with the encode/decode operation. Split these functions so that there are discrete operations for the specific directory format we are handling. In doing this, move all the header encode/decode functions to xfs_da_format.c as they are directly manipulating the on-disk format. It should be noted that all the growth in binary size is from xfs_da_format.c - the rest of the code actaully shrinks. text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4 789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5 789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6 791421 96802 1096 889319 d91e7 fs/xfs/xfs.o.p7 Signed-off-by:
-
Dave Chinner authored
The remaining non-vectorised code for the directory structure is the node format blocks. This is shared with the attribute tree, and so is slightly more complex to vectorise. Introduce a "non-directory" directory ops structure that is attached to all non-directory inodes so that attribute operations can be vectorised for all inodes. Once we do this, we can vectorise all the da btree operations. Because this patch adds more infrastructure than it removes the binary size does not decrease: text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4 789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5 789733 96802 1096 887631 d8b4f fs/xfs/xfs.o.p6 Signed-off-by:
-
Dave Chinner authored
Next step in the vectorisation process is the leaf block encode/decode operations. Most of the operations on leaves are handled by the data block vectors, so there are relatively few of them here. Because of all the shuffling of code and having to pass more state to some functions, this patch doesn't directly reduce the size of the binary. It does open up many more opportunities for factoring and optimisation, however. text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4 789061 96802 1096 886959 d88af fs/xfs/xfs.o.p5 Signed-off-by:
-
Dave Chinner authored
Convert the rest of the directory data block encode/decode operations to vector format. This further reduces the size of the built binary: text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 789005 96802 1096 886903 d8997 fs/xfs/xfs.o.p4 Signed-off-by:
-
Dave Chinner authored
Following from the initial patches to vectorise the shortform directory encode/decode operations, convert half the data block operations to use the vector. The rest will be done in a second patch. This further reduces the size of the built binary: text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 789293 96802 1096 887191 d8997 fs/xfs/xfs.o.p3 Signed-off-by:
-
Dave Chinner authored
Following from the initial patch to introduce the directory operations vector, convert the rest of the shortform directory operations to use vectored ops rather than superblock feature checks. This further reduces the size of the built binary: text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 792350 96802 1096 890248 d9588 fs/xfs/xfs.o.p2 Signed-off-by:
-
Dave Chinner authored
Lots of the dir code now goes through switches to determine what is the correct on-disk format to parse. It generally involves a "xfs_sbversion_hasfoo" check, deferencing the superblock version and feature fields and hence touching several cache lines per operation in the process. Some operations do multiple checks because they nest conditional operations and they don't pass the information in a direct fashion between each other. Hence, add an ops vector to the xfs_inode structure that is configured when the inode is initialised to point to all the correct decode and encoding operations. This will significantly reduce the branchiness and cacheline footprint of the directory object decoding and encoding. This is the first patch in a series of conversion patches. It will introduce the ops structure, the setup of it and add the first operation to the vector. Subsequent patches will convert directory ops one at a time to keep the changes simple and obvious. Just this patch shows the benefit of such an approach on code size. Just converting the two shortform dir operations as this patch does decreases the built binary size by ~1500 bytes: $ size fs/xfs/xfs.o.orig fs/xfs/xfs.o.p1 text data bss dec hex filename 794490 96802 1096 892388 d9de4 fs/xfs/xfs.o.orig 792986 96802 1096 890884 d9804 fs/xfs/xfs.o.p1 $ That's a significant decrease in the instruction cache footprint of the directory code for such a simple change, and indicates that this approach is definitely worth pursuing further. Signed-off-by:
-
- 23 Oct, 2013 7 commits
-
-
Dave Chinner authored
xfs_rtalloc.c is partially shared with userspace. Split the file up into two parts - one that is kernel private and the other which is wholly shared with userspace. Signed-off-by:
-
Dave Chinner authored
Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by:
-
Dave Chinner authored
xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by:
-
Dave Chinner authored
We don't do callbacks at transaction commit time, no do we have any infrastructure to set up or run such callbacks, so remove the variables and typedefs for these operations. If we ever need to add callbacks, we can reintroduce the variables at that time. Signed-off-by:
-
Dave Chinner authored
Parts of userspace want to be able to read and modify dquot buffers (e.g. xfs_db) so we need to split out the reading and writing of these buffers so it is easy to shared code with libxfs in userspace. Signed-off-by:
-
Dave Chinner authored
The on-disk format definitions for the directory and attribute structures are spread across 3 header files right now, only one of which is dedicated to defining on-disk structures and their manipulation (xfs_dir2_format.h). Pull all the format definitions into a single header file - xfs_da_format.h - and switch all the code over to point at that. Signed-off-by:
-
Dave Chinner authored
All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by:
-
- 21 Oct, 2013 5 commits
-
-
Christoph Hellwig authored
Now that only one caller of xfs_change_file_space is left it can be merged into said caller. Signed-off-by:
-
Christoph Hellwig authored
Call xfs_alloc_file_space or xfs_free_file_space directly from xfs_file_fallocate instead of going through xfs_change_file_space. This simplified the code by removing the unessecary marshalling of the arguments into an xfs_flock64_t structure and allows removing checks that are already done in the VFS code. Signed-off-by:
-
Christoph Hellwig authored
Currently fallocate always holds the iolock when calling into xfs_change_file_space, while the ioctl path lets some of the lower level functions take it, but leave it out in others. This patch makes sure the ioctl path also always holds the iolock and thus introduces consistent locking for the preallocation operations while simplifying the code and allowing to kill the now unused XFS_ATTR_NOLOCK flag. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
There is no reason to conditionally take the iolock inside xfs_setattr_size when we can let the caller handle it unconditionally, which just incrases the lock hold time for the case where it was previously taken internally by a few instructions. Signed-off-by:
-
- 17 Oct, 2013 4 commits
-
-
Eric Sandeen authored
When xfs_growfs_data_private() is updating backup superblocks, it bails out on the first error encountered, whether reading or writing: * If we get an error writing out the alternate superblocks, * just issue a warning and continue. The real work is * already done and committed. This can cause a problem later during repair, because repair looks at all superblocks, and picks the most prevalent one as correct. If we bail out early in the backup superblock loop, we can end up with more "bad" matching superblocks than good, and a post-growfs repair may revert the filesystem to the old geometry. With the combination of superblock verifiers and old bugs, we're more likely to encounter read errors due to verification. And perhaps even worse, we don't even properly write any of the newly-added superblocks in the new AGs. Even with this change, growfs will still say: xfs_growfs: XFS_IOC_FSGROWFSDATA xfsctl failed: Structure needs cleaning data blocks changed from 319815680 to 335216640 which might be confusing to the user, but it at least communicates that something has gone wrong, and dmesg will probably highlight the need for an xfs_repair. And this is still best-effort; if verifiers fail on more than half the backup supers, they may still "win" - but that's probably best left to repair to more gracefully handle by doing its own strict verification as part of the backup super "voting." Signed-off-by:
Dave Chinner <david@fromorbit.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by:
-
Eric Sandeen authored
If we get EWRONGFS due to probing of non-xfs filesystems, there's no need to issue the scary corruption error and backtrace. Signed-off-by:
Mark Tinguely <tinguely@sgi.com> Reviewed-by:
-
Eric Sandeen authored
__xfs_printk adds its own "\n". Having it in the original string leads to unintentional blank lines from these messages. Most format strings have no newline, but a few do, leading to i.e.: [ 7347.119911] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05 [ 7347.119911] [ 7347.119919] XFS (sdb2): Access to block zero in inode 132 start_block: 0 start_off: 0 blkcnt: 0 extent-state: 0 lastx: 1a05 [ 7347.119919] Fix them all. Signed-off-by:
-
Dave Chinner authored
Recent analysis of a deadlocked XFS filesystem from a kernel crash dump indicated that the filesystem was stuck waiting for log space. The short story of the hang on the RHEL6 kernel is this: - the tail of the log is pinned by an inode - the inode has been pushed by the xfsaild - the inode has been flushed to it's backing buffer and is currently flush locked and hence waiting for backing buffer IO to complete and remove it from the AIL - the backing buffer is marked for write - it is on the delayed write queue - the inode buffer has been modified directly and logged recently due to unlinked inode list modification - the backing buffer is pinned in memory as it is in the active CIL context. - the xfsbufd won't start buffer writeback because it is pinned - xfssyncd won't force the log because it sees the log as needing to be covered and hence wants to issue a dummy transaction to move the log covering state machine along. Hence there is no trigger to force the CIL to the log and hence unpin the inode buffer and therefore complete the inode IO, remove it from the AIL and hence move the tail of the log along, allowing transactions to start again. Mainline kernels also have the same deadlock, though the signature is slightly different - the inode buffer never reaches the delayed write lists because xfs_buf_item_push() sees that it is pinned and hence never adds it to the delayed write list that the xfsaild flushes. There are two possible solutions here. The first is to simply force the log before trying to cover the log and so ensure that the CIL is emptied before we try to reserve space for the dummy transaction in the xfs_log_worker(). While this might work most of the time, it is still racy and is no guarantee that we don't get stuck in xfs_trans_reserve waiting for log space to come free. Hence it's not the best way to solve the problem. The second solution is to modify xfs_log_need_covered() to be aware of the CIL. We only should be attempting to cover the log if there is no current activity in the log - covering the log is the process of ensuring that the head and tail in the log on disk are identical (i.e. the log is clean and at idle). Hence, by definition, if there are items in the CIL then the log is not at idle and so we don't need to attempt to cover it. When we don't need to cover the log because it is active or idle, we issue a log force from xfs_log_worker() - if the log is idle, then this does nothing. However, if the log is active due to there being items in the CIL, it will force the items in the CIL to the log and unpin them. In the case of the above deadlock scenario, instead of xfs_log_worker() getting stuck in xfs_trans_reserve() attempting to cover the log, it will instead force the log, thereby unpinning the inode buffer, allowing IO to be issued and complete and hence removing the inode that was pinning the tail of the log from the AIL. At that point, everything will start moving along again. i.e. the xfs_log_worker turns back into a watchdog that can alleviate deadlocks based around pinned items that prevent the tail of the log from being moved... Signed-off-by:
-
- 08 Oct, 2013 5 commits
-
-
Brian Foster authored
The xfs_inactive() return value is meaningless. Turn xfs_inactive() into a void function and clean up the error handling appropriately. Kill the VN_INACTIVE_[NO]CACHE directives as they are not relevant to Linux. Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
-
Brian Foster authored
Push the inode free work performed during xfs_inactive() down into a new xfs_inactive_ifree() helper. This clears xfs_inactive() from all inode locking and transaction management more directly associated with freeing the inode xattrs, extents and the inode itself. Signed-off-by:
-
Brian Foster authored
Create the new xfs_inactive_truncate() function to handle the truncate portion of xfs_inactive(). Push the locking and transaction management into the new function. Signed-off-by:
-
Brian Foster authored
Push down the transaction management for remote symlinks from xfs_inactive() down to xfs_inactive_symlink_rmt(). The latter is cleaned up to avoid transaction management intended for the calling context (i.e., trans duplication, reservation, item attachment). Signed-off-by:
-
Mark Tinguely authored
Add the inode type directory type support to XFS_IOC_FSGEOM so that xfs_repair/xfs_info knows if the superblock v4 filesystem enabled the feature. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
- 01 Oct, 2013 4 commits
-
-
Ben Myers authored
XFS never calls mark_inode_bad or iget_failed, so it will never see a bad inode. Remove all checks for is_bad_inode because they are unnecessary. Signed-off-by:
-
Jie Liu authored
At xfs_iext_realloc_direct(), the new_size is changed by adding if_bytes if originally the extent records are stored at the inline extent buffer, and we have to switch from it to a direct extent list for those new allocated extents, this is wrong. e.g, Create a file with three extents which was showing as following, xfs_io -f -c "truncate 100m" /xfs/testme for i in $(seq 0 5 10); do offset=$(($i * $((1 << 20)))) xfs_io -c "pwrite $offset 1m" /xfs/testme done Inline ------ irec: if_bytes bytes_diff new_size 1st 0 16 16 2nd 16 16 32 Switching --------- rnew_size 3rd 32 16 48 + 32 = 80 roundup=128 In this case, the desired value of new_size should be 48, and then it will be roundup to 64 and be assigned to rnew_size. However, this issue has been covered by resetting the if_bytes to the new_size which is calculated at the begnning of xfs_iext_add() before leaving out this function, and in turn make the rnew_size correctly again. Hence, this can not be detected via xfstestes. This patch fix above problem and revise the new_size comments at xfs_iext_realloc_direct() to make it more readable. Also, fix the comments while switching from the inline extent buffer to a direct extent list to reflect this change. Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Reviewed-by:
-
Jie Liu authored
Get rid of function variable count from xfs_iomap_write_allocate() as it is unused. Additionally, checkpatch warn me of the following for this change: WARNING: extern prototypes should be avoided in .h files +extern int xfs_iomap_write_allocate(struct xfs_inode *, xfs_off_t, So this patch also remove all extern function prototypes at xfs_iomap.h to suppress it to make this code style in consistent manner in this file. Signed-off-by:
-
Thierry Reding authored
This fixes a build failure caused by calling the free() function which does not exist in the Linux kernel. Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
