Remove hp_pin = 0 return. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc256_init() and alc256_shutup() must run delay when headset jack
was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.

[ NOTE: this is a quite quite similar change for ALC295 by commit
  d3ba58bb ("ALSA: hda/realtek - Support low power consumption for
  ALC295"), but applied to ALC256 codec instead -- tiwai ]

Fixes: 8983eb60 ("ALSA: hda/realtek - Move to ACT_INIT state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.2

A bunch of driver specific fixes that came in since the initial pull
request for v5.2, mainly warning fixes for the newly added Sound Open
Firmware code which people appeared to only start looking at after I'd
sent the pull request.

The existing code mistakenly uses IS_ENABLED in C code instead of as
in conditional compilation, leading to the following error:

ld: sound/soc/sof/core.o: in function `sof_machine_check':
sound/soc/sof/core.c:279: undefined reference to `sof_nocodec_setup'

Fix by using #if !IS_ENABLED()
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The SND_SOC_INTEL_COMMON Kconfig was removed months ago from SOF
Kconfig files but is still selected instead of the correct
SND_SOC_SOF_INTEL_COMMON kconfig which does select xtensa stuff,
leading to the following errors.

ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x120): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x180): undefined reference
to `sof_xtensa_arch_ops'
ld: sound/soc/sof/sof-acpi-dev.o:(.rodata+0x1e0): undefined reference
to `sof_xtensa_arch_ops'
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This fixes a compile warning below by properly handling the error code
from sof_get_ctrl_copy_params():
  include/linux/kernel.h:843:43: warning: 'sparams.pl_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
  sound/soc/sof/ipc.c:639:34: note: 'sparams.pl_size' was declared here

The function returns an error before setting sparams.pl_size, so it'd
assign an uninitialized value at a later point.

Fixes: 53e0c72d ("ASoC: SOF: Add support for IPC IO between DSP and Host")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

On the System76 Gazelle (gaze14), there is a headset microphone input
attached to 0x1a that does not have a jack detect. In order to get it
working, the pin configuration needs to be set correctly, and the
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is
identical to the patch already applied for the System76 Darter Pro
(darp5).
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add PCI IDs for LP and H skews.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Enter to close more power control widgets at suspend.
Remove hp_pin check. Add the default pin 0x21 as headphone.
Supported low power consumption, it must do depop procedure when
headset jack was plugged or unplugged.
So, alc225_init() and alc225_shutup() must run delay when headset
jack was plugged or unplugged.
If depop procedure not run with delay, it will have a chance to let
power consumption raise high.

[ A few compile fixes by tiwai ]

Fixes: 8983eb60 ("ALSA: hda/realtek - Move to ACT_INIT state")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Paper over a trivial case leading to an uninitialized variable compile
warning:
  sound/soc/rockchip/rockchip_pdm.c:179:3: warning: ‘clk_out’ may be used uninitialized in this function [-Wmaybe-uninitialized]

Fixes: 624e8e00 ("ASoC: rockchip: pdm: fixup pdm fractional div")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

A trivial fix for the randconfig build error:
  sound/soc/sof/ops.c:20:6: warning: ‘ret’ is used uninitialized in this function [-Wuninitialized]

Fixes: d1d95fcb ("ASoC: SOF: Add DSP HW abstraction operations")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

A trivial fix for the randconfig build error:
  sound/soc/codecs/da7219.c:2366:6: warning: unused variable ‘i’ [-Wunused-variable]

Fixes: d90ba6c8 ("ASoC: da7219: Expose BCLK and WCLK control through CCF")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fix kconfig warning for unmet dependency for IOSF_MBI when
PCI is not set/enabled.  Fixes this warning:

WARNING: unmet direct dependencies detected for IOSF_MBI
  Depends on [n]: PCI [=n]
  Selected by [y]:
  - SND_SOC_SOF_ACPI [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] && (ACPI [=y] || COMPILE_TEST [=n]) && X86 [=y]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Change trace level to debug to avoid spurious messages.
Return quietly when accessing iec958 control, while no
S/PDIF signal is available.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

- Set period minimum size. Ensure at least 5ms period
up to 48kHz/16 bits to prevent underrun/overrun.
- Remove MDMA constraints on period maximum size and
set period maximum to half the buffer maximum size.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The max98090 driver defines 3 DAPM muxes; one for the right line output
(LINMOD Mux), one for the left headphone mixer source (MIXHPLSEL Mux)
and one for the right headphone mixer source (MIXHPRSEL Mux). The same
bit is used for the mux as well as the DAPM enable, and although the mux
can be correctly configured, after playback has completed, the mux will
be reset during the disable phase. This is preventing the state of these
muxes from being saved and restored correctly on system reboot. Fix this
by marking these muxes as SND_SOC_NOPM.

Note this has been verified this on the Tegra124 Nyan Big which features
the MAX98090 codec.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The current algorithm allows 3 types of transfers, 16bit, 32bit and
burst. According to Realtek, 16bit transfers have a special restriction
in that it is restricted to the memory region of
0x18020000 ~ 0x18021000. This region is the memory location of the I2C
registers. The current algorithm does not uphold this restriction and
therefore fails to complete writes.

Since this has been broken for some time it likely no one is using it.
Better to simply disable the 16 bit writes. This will allow users to
properly load firmware over SPI without data corruption.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ben Zhang <benzh@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

On the machines with AMD GPU or Nvidia GPU, we often meet this issue:
after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting
even there is no any monitors plugged.

When this problem happens, we check the /proc/asound/cardX/eld#N.M, we
will find the monitor_present=1, eld_valid=0.

The root cause is BIOS or GPU driver makes the PRESENCE valid even no
monitor plugged, and of course the driver will not get the valid
eld_data subsequently.

In this situation, we should not report the jack_plugged event, to do
so, let us change the function hdmi_present_sense_via_verbs(). In this
function, it reads the pin_sense via snd_hda_pin_sense(), after
calling this function, the jack_dirty is 0, and before exiting
via_verbs(), we change the shadow pin_sense according to both
monitor_present and eld_valid, then in the snd_hda_jack_report_sync(),
since the jack_dirty is still 0, it will report jack event according
to this modified shadow pin_sense.

After this change, the driver will not report Jack_is_plugged event
through hdmi_present_sense_via_verbs() if monitor_present is 1 and
eld_valid is 0.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The driver will check the monitor presence when resuming from suspend,
starting poll or interrupt triggers. In these 3 situations, the
jack_dirty will be set to 1 first, then the hda_jack.c reads the
pin_sense from register, after reading the register, the jack_dirty
will be set to 0. But hdmi_repoll_work() is enabled in these 3
situations, It will read the pin_sense a couple of times subsequently,
since the jack_dirty is 0 now, It does not read the register anymore,
instead it uses the shadow pin_sense which is read at the first time.

It is meaningless to check the shadow pin_sense a couple of times,
we need to read the register to check the real plugging state, so
we set the jack_dirty to 1 in the hdmi_repoll_work().
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.2

This is a pretty huge set of changes, it's been a pretty active release
all round but the big thing with this release is the Sound Open Firmware
changes from Intel, providing another DSP framework for use with the
DSPs in their SoCs.  This one works with the firmware of the same name
which is free software (unlike the previous DSP firmwares and framework)
and there has been some interest in adoption by other systems already so
hopefully we will see adoption by other vendors in the future.

Other highlights include:

 - Support for MCLK/sample rate ratio setting in the generic cards.
 - Support for pin switches in the generic cards.
 - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
   McDermond.
 - New drivers for Freescale audio mixers, several Intel machines,
   several Mediatek machines, Meson G12A, Sound Open Firmware and
   Spreadtrum compressed audio and DMA devices.

For Spreadtrum audio platform driver, it need allocate a larger DMA buffer
dynamically to copy audio data between userspace and kernel space, but that
will increase the risk of memory allocation failure especially the system
is under heavy load situation.

To make sure the audio can work in this scenario, we usually reserve one
region of memory to be used as a shared pool of DMA buffers for the
platform component. So add of_reserved_mem_device_init_by_idx() function
to initialize the shared pool of DMA buffers to be used by the platform
component.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This function is called from load_guspatch() and the rate is specified
by the user.  If they accidentally selected zero then it would crash the
kernel.  I've just changed the zero to a one.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull perf fixes from Ingo Molnar:
 "I'd like to apologize for this very late pull request: I was dithering
  through the week whether to send the fixes, and then yesterday Jiri's
  crash fix for a regression introduced in this cycle clearly marked
  perf/urgent as 'must merge now'.

  Most of the commits are tooling fixes, plus there's three kernel fixes
  via four commits:

    - race fix in the Intel PEBS code

    - fix an AUX bug and roll back a previous attempt

    - fix AMD family 17h generic HW cache-event perf counters

  The largest diffstat contribution comes from the AMD fix - a new event
  table is introduced, which is a fairly low risk change but has a large
  linecount"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Fix race in intel_pmu_disable_event()
  perf/x86/intel/pt: Remove software double buffering PMU capability
  perf/ring_buffer: Fix AUX software double buffering
  perf tools: Remove needless asm/unistd.h include fixing build in some places
  tools arch uapi: Copy missing unistd.h headers for arc, hexagon and riscv
  tools build: Add -ldl to the disassembler-four-args feature test
  perf cs-etm: Always allocate memory for cs_etm_queue::prev_packet
  perf cs-etm: Don't check cs_etm_queue::prev_packet validity
  perf report: Report OOM in status line in the GTK UI
  perf bench numa: Add define for RUSAGE_THREAD if not present
  tools lib traceevent: Change tag string for error
  perf annotate: Fix build on 32 bit for BPF annotation
  tools uapi x86: Sync vmx.h with the kernel
  perf bpf: Return value with unlocking in perf_env__find_btf()
  MAINTAINERS: Include vendor specific files under arch/*/events/*
  perf/x86/amd: Update generic hardware cache events for Family 17h

Pull scheduler fix from Ingo Molnar:
 "Fix a kobject memory leak in the cpufreq code"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cpufreq: Fix kobject memleak

Pull x86 fix from Ingo Molnar:
 "Disable function tracing during early SME setup to fix a boot crash on
  SME-enabled kernels running distro kernels (some of which have
  function tracing enabled)"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/mem_encrypt: Disable all instrumentation for early SME setup

Pull vfs fixes from Al Viro:

 - a couple of ->i_link use-after-free fixes

 - regression fix for wrong errno on absent device name in mount(2)
   (this cycle stuff)

 - ancient UFS braino in large GID handling on Solaris UFS images (bogus
   cut'n'paste from large UID handling; wrong field checked to decide
   whether we should look at old (16bit) or new (32bit) field)

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour
  Abort file_remove_privs() for non-reg. files
  [fix] get rid of checking for absent device name in vfs_get_tree()
  apparmorfs: fix use-after-free on symlink traversal
  securityfs: fix use-after-free on symlink traversal

New race in x86_pmu_stop() was introduced by replacing the
atomic __test_and_clear_bit() of cpuc->active_mask by separate
test_bit() and __clear_bit() calls in the following commit:

  3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler")

The race causes panic for PEBS events with enabled callchains:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  ...
  RIP: 0010:perf_prepare_sample+0x8c/0x530
  Call Trace:
   <NMI>
   perf_event_output_forward+0x2a/0x80
   __perf_event_overflow+0x51/0xe0
   handle_pmi_common+0x19e/0x240
   intel_pmu_handle_irq+0xad/0x170
   perf_event_nmi_handler+0x2e/0x50
   nmi_handle+0x69/0x110
   default_do_nmi+0x3e/0x100
   do_nmi+0x11a/0x180
   end_repeat_nmi+0x16/0x1a
  RIP: 0010:native_write_msr+0x6/0x20
  ...
   </NMI>
   intel_pmu_disable_event+0x98/0xf0
   x86_pmu_stop+0x6e/0xb0
   x86_pmu_del+0x46/0x140
   event_sched_out.isra.97+0x7e/0x160
  ...

The event is configured to make samples from PEBS drain code,
but when it's disabled, we'll go through NMI path instead,
where data->callchain will not get allocated and we'll crash:

          x86_pmu_stop
            test_bit(hwc->idx, cpuc->active_mask)
            intel_pmu_disable_event(event)
            {
              ...
              intel_pmu_pebs_disable(event);
              ...

EVENT OVERFLOW ->  <NMI>
                     intel_pmu_handle_irq
                       handle_pmi_common
   TEST PASSES ->        test_bit(bit, cpuc->active_mask))
                           perf_event_overflow
                             perf_prepare_sample
                             {
                               ...
                               if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY))
                                     data->callchain = perf_callchain(event, regs);

         CRASH ->              size += data->callchain->nr;
                             }
                   </NMI>
              ...
              x86_pmu_disable_event(event)
            }

            __clear_bit(hwc->idx, cpuc->active_mask);

Fixing this by disabling the event itself before setting
off the PEBS bit.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Lendacky Thomas <Thomas.Lendacky@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 3966c3fe ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull powerpc fix from Michael Ellerman:
 "One regression fix.

  Changes we merged to STRICT_KERNEL_RWX on 32-bit were causing crashes
  under load on some machines depending on memory layout.

  Thanks to Christophe Leroy"

* tag 'powerpc-5.1-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/32s: Fix BATs setting with CONFIG_STRICT_KERNEL_RWX

Pull KVM fixes from Paolo Bonzini:

 - PPC and ARM bugfixes from submaintainers

 - Fix old Windows versions on AMD (recent regression)

 - Fix old Linux versions on processors without EPT

 - Fixes for LAPIC timer optimizations

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: nVMX: Fix size checks in vmx_set_nested_state
  KVM: selftests: make hyperv_cpuid test pass on AMD
  KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer
  KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size
  x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE
  KVM: x86: Whitelist port 0x7e for pre-incrementing %rip
  Documentation: kvm: fix dirty log ioctl arch lists
  KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit
  KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls
  kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP
  KVM: arm/arm64: Ensure vcpu target is unset on reset failure
  KVM: lapic: Convert guest TSC to host time domain if necessary
  KVM: lapic: Allow user to disable adaptive tuning of timer advancement
  KVM: lapic: Track lapic timer advance per vCPU
  KVM: lapic: Disable timer advancement if adaptive tuning goes haywire
  x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012
  KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short
  KVM: PPC: Book3S: Protect memslots while validating user address
  KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit
  KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs
  ...

Merge branch 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
 "I2C driver bugfixes and a MAINTAINERS update for you"

* 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: Prevent runtime suspend of adapter when Host Notify is required
  i2c: synquacer: fix enumeration of slave devices
  MAINTAINERS: friendly takeover of i2c-gpio driver
  i2c: designware: ratelimit 'transfer when suspended' errors
  i2c: imx: correct the method of getting private data in notifier_call

Pull drm fix from Dave Airlie:
 "Just a single qxl revert"

* tag 'drm-fixes-2019-05-03' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/qxl: drop prime import/export callbacks"

Pull clk fixes from Stephen Boyd:
 "Two fixes for the NKMP clks on Allwinner SoCs, a locking fix for
  clkdev where we forgot to hold a lock while iterating a list that can
  change, and finally a build fix that adds some stubs for clk APIs that
  are used by devfreq drivers on platforms without the clk APIs"

* tag 'clk-fixes-for-linus' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: Add missing stubs for a few functions
  clkdev: Hold clocks_mutex while iterating clocks list
  clk: sunxi-ng: nkmp: Explain why zero width check is needed
  clk: sunxi-ng: nkmp: Avoid GENMASK(-1, 0)

Pull sound fixes from Takashi Iwai:
 "A few stable fixes at this round.

  The USB Line6 audio fixes are a bit large, but they are rather trivial
  and pretty much device-specific, so should be safe to apply at this
  late stage. Ditto for other HD-audio quirks"

* tag 'sound-5.1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Apply the fixup for ASUS Q325UAR
  ALSA: line6: use dynamic buffers
  ALSA: hda/realtek - Fixed Dell AIO speaker noise
  ALSA: hda/realtek - Add new Dell platform for headset mode

Several sound related entries in MAINTAINERS refer to the old git tree
at "git://git.alsa-project.org/alsa-kernel.git".  This is no longer used
for development, and Takashi Iwai's kernel.org tree is used instead.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Now that all AUX allocations are high-order by default, the software
double buffering PMU capability doesn't make sense any more, get rid
of it. In case some PMUs choose to opt out, we can re-introduce it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Link: http://lkml.kernel.org/r/20190503085536.24119-3-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

This recent commit:

  5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically")

overlooked the fact that the previous one page granularity of the AUX buffer
provided an implicit double buffering capability to the PMU driver, which
went away when the entire buffer became one high-order page.

Always make the full-trace mode AUX allocation at least two-part to preserve
the previous behavior and allow the implicit double buffering to continue.
Reported-by: Ammy Yi <ammy.yi@intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: adrian.hunter@intel.com
Fixes: 5768402f ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically")
Link: http://lkml.kernel.org/r/20190503085536.24119-2-alexander.shishkin@linux.intel.comSigned-off-by: Ingo Molnar <mingo@kernel.org>

On kbl_rt5663_max98927, commit 38a5882e
    ("ASoC: Intel: kbl_rt5663_max98927: Map BTN_0 to KEY_PLAYPAUSE")
    This key pair mapping to play/pause when playing Youtube

The Android 3.5mm Headset jack specification mentions that BTN_0 should
be mapped to KEY_MEDIA, but this is less logical than KEY_PLAYPAUSE,
which has much broader userspace support.

For example, the Chrome OS userspace now supports KEY_PLAYPAUSE to toggle
play/pause of videos and audio, but does not handle KEY_MEDIA.

Furthermore, Android itself now supports KEY_PLAYPAUSE equivalently, as the
new USB headset spec requires KEY_PLAYPAUSE for BTN_0.
https://source.android.com/devices/accessories/headset/usb-headset-spec

The same fix is required on Chrome kbl_da7219_max98357a.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>