Update NO_SLEW macro to LPI_NO_SLEW macro as this driver lpi specific.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1650285427-19752-4-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree binding Documentation details for Qualcomm SC7280
LPASS LPI pinctrl driver.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1650285427-19752-3-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Change generic lpass lpi pincotrol bindings file to SoC specific file,
to distinguish and accomadate other SoC specific dt bindings.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1650285427-19752-2-git-send-email-quic_srivasam@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add compatible string for rk3588 pin controller. No other changes
are required, since the new controller can use the old binding.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20220422170920.401914-12-sebastian.reichel@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The MC2 MMC interface can be configured with the FBCLK
(feedback clock) unconnected, leaving the pin available
for reuse for something else. Add a group mc2_a_2 for
this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220418164317.864418-1-linus.walleij@linaro.org

Use the devm_platform_ioremap_resource() helper instead of calling
platform_get_resource() and devm_ioremap_resource() separately.Make the
code simpler without functional changes.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220418020238.2556989-1-lv.ruyi@zte.com.cnSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

By being a bit smarter about how the SoC version checks are performed,
it is possible to have all the code paths that correspond to SoCs
disabled in the kernel config automatically marked as dead code by the
compiler, and therefore garbage-collected.

With this patch, when compiling a kernel that only targets the JZ4760
for instance, the driver is now about 4.5 KiB smaller.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220412162218.32509-1-paul@crapouillou.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the compatible string "rockchip,rk3036-pinctrl" in already
in use in rk3036.dtsi to rockchip,pinctrl.yaml.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220330133952.1949-1-jbx6244@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Convert the i.MX7D pinctrl binding to DT schema format using json-schema
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20220303150653.1903910-1-alexander.stein@ew.tq-group.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The MODULE_DEVICE_TABLE already creates proper alias for platform
driver.  Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220407202509.23228-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The kernel test robot reported a warning as below:
>> drivers/pinctrl/meson/pinctrl-meson-s4.c:178:27: warning: unused variable 'tdm_sclk1_c_pins' [-Wunused-const-variable]
   static const unsigned int tdm_sclk1_c_pins[]            = { GPIOC_3 };

Fix it by adding missing description about this pins

Fixes: 775214d3 ("pinctrl: meson: add pinctrl driver support for Meson-S4 Soc")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20220330023720.18238-1-qianggui.song@amlogic.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Set the pinctrl driver as built-in by default if
ARM64 and ARCH_MEDIATEK are enabled.

Fixes: 6cf5e9ef ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Miles Chen <miles.chen@mediatek.com>
Link: https://lore.kernel.org/r/20220327160813.2978637-1-fparent@baylibre.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for deferred PIN_CONFIG_INPUT_ENABLE handling.
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220328005005.72492-4-kc@postmarketos.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Handle the PIN_CONFIG_INPUT_ENABLE param for configuring GPIOs as input.
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-3-kc@postmarketos.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for deferring other params like PIN_CONFIG_INPUT_ENABLE.
This will be used to add support for PIN_CONFIG_INPUT_ENABLE to the
driver.

Fixes: e7165b1d ("pinctrl/rockchip: add a queue for deferred pin output settings on probe")
Fixes: 59dd178e ("gpio/rockchip: fetch deferred output settings on probe")
Signed-off-by: Caleb Connolly <kc@postmarketos.org>
Link: https://lore.kernel.org/r/20220328005005.72492-2-kc@postmarketos.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The SoC supports a debug clock output of its internal clocks. Depending
on the clk_sel input (GPIO_31) clk_mon (GPIO_30) will output either
cpu_clk/64 or sys_clk/64. This is very useful for debugging and is
missing in the pinmux table. Add it.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220326192848.2944519-2-michael@walle.ccSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

According to the reference manual, you can mux the PWM output on GPIO27
and GPIO51. This was missing in the pinmux table. Add it.

Tested on a LAN9668 on GPIO51.
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20220326192848.2944519-1-michael@walle.ccSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Convert the ocelot-pinctrl device tree binding to the new YAML format.

Additionally to the original binding documentation, add interrupt
properties which are optional and already used on several SoCs like
SparX-5, Luton, Ocelot and LAN966x but were not documented before.

Also, on the sparx5 and the lan966x SoCs there are two items for the
reg property.
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220319204628.1759635-7-michael@walle.ccSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

PMX65 pmic support gpio controller so add compatible.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1649048650-14059-3-git-send-email-quic_rohiagar@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PMX65 GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1649048650-14059-2-git-send-email-quic_rohiagar@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The commit c8013355 ("ARM: dts: gpio-ranges property is now required")
fixed the GPIO probing issues caused by "pinctrl: bcm2835: Change init
order for gpio hogs". This changed only the kernel DTS files. Unfortunately
it isn't guaranteed that these files are shipped to all users.

So implement the necessary backward compatibility for BCM2835 and
BCM2711 platform.

Fixes: 266423e6 ("pinctrl: bcm2835: Change init order for gpio hogs")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220409095129.45786-3-stefan.wahren@i2se.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Since commit 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges")
the device tree nodes of GPIO controller need the gpio-ranges property to
handle gpio-hogs. Unfortunately it's impossible to guarantee that every new
kernel is shipped with an updated device tree binary.

In order to provide backward compatibility with those older DTB, we need a
callback within of_gpiochip_add_pin_range() so the relevant platform driver
can handle this case.

Fixes: 2ab73c6d ("gpio: Support GPIO controllers without pin-ranges")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Link: https://lore.kernel.org/r/20220409095129.45786-2-stefan.wahren@i2se.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the gpio-line-names optional property to the pinctrl-mt8192 binding
to prevent dt_binding_check warnings when it is present in the pinctrl
node in the Devicetree.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220315211936.442708-5-nfraprado@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the mediatek,pull-up-adv property to the pinctrl-mt8192 dt-binding
to allow configuring pull-up resistors on the pins of MT8192. It is the
same as in mt8183-pinctrl.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220315211936.442708-4-nfraprado@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the mediatek,drive-strength-adv property to the pinctrl-mt8192
dt-binding to allow further drive current adjustments for I2C nodes on
MT8192. It is the same as in mt8183-pinctrl.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220315211936.442708-3-nfraprado@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

On mt8192, the pinctrl node has pinctrl groups to group pin
configurations. Each pinctrl group contains one or more pinmux subnodes
to list needed pins and their configurations. By supporting multiple
subnodes, we can configure different pin characteristics
(driving/pull-up/pull-down/etc.) in a pinctrl group.

Update the mt8192 pinctrl dt-binding to add the missing pinctrl group
node that wraps the pinmux subnodes and update the example at the end.
While at it, also remove the example embedded in the description since
it is redundant to the already supplied example at the end.

This same change was done for mt8195 in commit 79dcd4e8 ("dt-bindings:
pinctrl: mt8195: add wrapping node of pin configurations").
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220315211936.442708-2-nfraprado@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add FWQSPI function/group to support QSPI mode on the dedicated
FWSPI interface.
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220329173932.2588289-6-quic_jaehyoo@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add FWSPIDQ2 (AE12) and FWSPIDQ3 (AF12) function-group to support
AST2600 FW SPI quad mode. These pins can be used with dedicated FW
SPI pins - FWSPICS0# (AB14), FWSPICK (AF13), FWSPIMOSI (AC14)
and FWSPIMISO (AB13).
Signed-off-by: Johnny Huang <johnny_huang@aspeedtech.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-5-quic_jaehyoo@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

FWQSPID is not a group of FWSPID so remove it.

Fixes: 7488838f ("dt-bindings: pinctrl: aspeed: Document AST2600 pinmux")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220329173932.2588289-4-quic_jaehyoo@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

FWSPIDQ2 and FWSPIDQ3 are not part of FWSPI18 interface so remove
FWQSPID group in pinctrl. These pins must be used with the FWSPI
pins that are dedicated for boot SPI interface which provides
same 3.3v logic level.

Fixes: 2eda1cde ("pinctrl: aspeed: Add AST2600 pinmux support")
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20220329173932.2588289-3-quic_jaehyoo@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This pinctrl driver supports the 98DX25xx and 98DX35xx family of chips
from Marvell. It is based on the Marvell SDK with additions for various
(non-gpio) pin configurations based on the datasheet.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220414233055.586962-3-chris.packham@alliedtelesis.co.nzSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add JSON schema for marvell,ac5-pinctrl present on the Marvell 98DX2530
SoC.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220414233055.586962-2-chris.packham@alliedtelesis.co.nzSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Specify the PDC mapping for SM8150, so that gpio interrupts are
properly mapped to the wakeup IRQs of the PDC.

Cc: Maulik Shah <quic_mkshah@quicinc.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220226184028.111566-3-bhupesh.sharma@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the compatible string for SM8150 SoC from Qualcomm.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20220226184028.111566-2-bhupesh.sharma@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull more tracing updates from Steven Rostedt:

 - Rename the staging files to give them some meaning. Just
   stage1,stag2,etc, does not show what they are for

 - Check for NULL from allocation in bootconfig

 - Hold event mutex for dyn_event call in user events

 - Mark user events to broken (to work on the API)

 - Remove eBPF updates from user events

 - Remove user events from uapi header to keep it from being installed.

 - Move ftrace_graph_is_dead() into inline as it is called from hot
   paths and also convert it into a static branch.

* tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Move user_events.h temporarily out of include/uapi
  ftrace: Make ftrace_graph_is_dead() a static branch
  tracing: Set user_events to BROKEN
  tracing/user_events: Remove eBPF interfaces
  tracing/user_events: Hold event_mutex during dyn_event_add
  proc: bootconfig: Add null pointer check
  tracing: Rename the staging files for trace_events

Pull clk fix from Stephen Boyd:
 "A single revert to fix a boot regression seen when clk_put() started
  dropping rate range requests. It's best to keep various systems
  booting so we'll kick this out and try again next time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  Revert "clk: Drop the rate range on clk_put()"

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes and updates:

   - Make the prctl() for enabling dynamic XSTATE components correct so
     it adds the newly requested feature to the permission bitmap
     instead of overwriting it. Add a selftest which validates that.

   - Unroll string MMIO for encrypted SEV guests as the hypervisor
     cannot emulate it.

   - Handle supervisor states correctly in the FPU/XSTATE code so it
     takes the feature set of the fpstate buffer into account. The
     feature sets can differ between host and guest buffers. Guest
     buffers do not contain supervisor states. So far this was not an
     issue, but with enabling PASID it needs to be handled in the buffer
     offset calculation and in the permission bitmaps.

   - Avoid a gazillion of repeated CPUID invocations in by caching the
     values early in the FPU/XSTATE code.

   - Enable CONFIG_WERROR in x86 defconfig.

   - Make the X86 defconfigs more useful by adapting them to Y2022
     reality"

* tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Consolidate size calculations
  x86/fpu/xstate: Handle supervisor states in XSTATE permissions
  x86/fpu/xsave: Handle compacted offsets correctly with supervisor states
  x86/fpu: Cache xfeature flags from CPUID
  x86/fpu/xsave: Initialize offset/size cache early
  x86/fpu: Remove unused supervisor only offsets
  x86/fpu: Remove redundant XCOMP_BV initialization
  x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO
  x86/config: Make the x86 defconfigs a bit more usable
  x86/defconfig: Enable WERROR
  selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test
  x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation

Pull RT signal fix from Thomas Gleixner:
 "Revert the RT related signal changes. They need to be reworked and
  generalized"

* tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"

Pull more dma-mapping updates from Christoph Hellwig:

 - fix a regression in dma remap handling vs AMD memory encryption (me)

 - finally kill off the legacy PCI DMA API (Christophe JAILLET)

* tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move pgprot_decrypted out of dma_pgprot
  PCI/doc: cleanup references to the legacy PCI DMA API
  PCI: Remove the deprecated "pci-dma-compat.h" API