- 19 Mar, 2020 5 commits
-
-
Christoph Hellwig authored
We know the version is 3 if on a v5 file system. For earlier file systems formats we always upgrade the remaining v1 inodes to v2 and thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode helper to check if we deal with small or large dinodes, and thus remove the need for the di_version field in struct icdinode. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Chandan Rajendra <chandanrlinux@gmail.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Christoph Hellwig authored
Only v5 file systems can have the reflink feature, and those will always use the large dinode format. Remove the extra check for the inode version. Signed-off-by:
-
Christoph Hellwig authored
di_flags2 is initialized to zero for v4 and earlier file systems. This means di_flags2 can only be non-zero for a v5 file systems, in which case both the parent and child inodes can store the field. Remove the extra di_version check, and also remove the rather pointless local di_flags2 variable while at it. Signed-off-by:
-
Christoph Hellwig authored
The size of the dinode structure is only dependent on the file system version, so instead of checking the individual inode version just use the newly added xfs_sb_version_has_large_dinode helper, and simplify various calling conventions. Signed-off-by:
-
Christoph Hellwig authored
Add a new wrapper to check if a file system supports the v3 inode format with a larger dinode core. Previously we used xfs_sb_version_hascrc for that, which is technically correct but a little confusing to read. Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode so that we have one place that documents the superblock version to inode version relationship. Signed-off-by:
-
- 18 Mar, 2020 12 commits
-
-
Brian Foster authored
AIL removal of the quotaoff start intent and free of both quotaoff intents is currently limited to the ->iop_committed() handler of the end intent. This executes when the end intent is committed to the on-disk log and marks the completion of the operation. The problem with this is it assumes the success of the operation. If a shutdown or other error occurs during the quotaoff, it's possible for the quotaoff task to exit without removing the start intent from the AIL. This results in an unmount hang as the AIL cannot be emptied. Further, no other codepath frees the intents and so this is also a memory leak vector. First, update the high level quotaoff error path to directly remove and free the quotaoff start intent if it still exists in the AIL at the time of the error. Next, update both of the start and end quotaoff intents with an ->iop_release() callback to properly handle transaction abort. This means that If the quotaoff start transaction aborts, it frees the start intent in the transaction commit path. If the filesystem shuts down before the end transaction allocates, the quotaoff sequence removes and frees the start intent. If the end transaction aborts, it removes the start intent and frees both. This ensures that a shutdown does not result in a hung unmount and that memory is not leaked regardless of when a quotaoff error occurs. Signed-off-by:
-
Brian Foster authored
AIL removal of the quotaoff start intent and free of both intents is hardcoded to the ->iop_committed() handler of the end intent. Factor out the start intent handling code so it can be used in a future patch to properly handle quotaoff errors. Use xfs_trans_ail_remove() instead of the _delete() variant to acquire the AIL lock and also handle cases where an intent might not reside in the AIL at the time of a failure. Signed-off-by:
-
Darrick J. Wong authored
Add support for btree staging cursors for the rmap btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by:
-
Darrick J. Wong authored
Add support for btree staging cursors for the refcount btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by:
-
Darrick J. Wong authored
Add support for btree staging cursors for the inode btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by:
-
Darrick J. Wong authored
Add support for btree staging cursors for the free space btrees. This is needed both for online repair and also to convert xfs_repair to use btree bulk loading. Signed-off-by:
-
Darrick J. Wong authored
Add a new btree function that enables us to bulk load a btree cursor. This will be used by the upcoming online repair patches to generate new btrees. This avoids the programmatic inefficiency of calling xfs_btree_insert in a loop (which generates a lot of log traffic) in favor of stamping out new btree blocks with ordered buffers, and then committing both the new root and scheduling the removal of the old btree blocks in a single transaction commit. The design of this new generic code is based off the btree rebuilding code in xfs_repair's phase 5 code, with the explicit goal of enabling us to share that code between scrub and repair. It has the additional feature of being able to control btree block loading factors. Signed-off-by:
-
Darrick J. Wong authored
Create an in-core fake root for inode-rooted btree types so that callers can generate a whole new btree using the upcoming btree bulk load function without making the new tree accessible from the rest of the filesystem. It is up to the individual btree type to provide a function to create a staged cursor (presumably with the appropriate callouts to update the fakeroot) and then commit the staged root back into the filesystem. Signed-off-by:
-
Darrick J. Wong authored
Create an in-core fake root for AG-rooted btree types so that callers can generate a whole new btree using the upcoming btree bulk load function without making the new tree accessible from the rest of the filesystem. It is up to the individual btree type to provide a function to create a staged cursor (presumably with the appropriate callouts to update the fakeroot) and then commit the staged root back into the filesystem. Signed-off-by:
-
Darrick J. Wong authored
Add a xbitmap_hweight helper function so that we can get rid of the open-coded loop. Signed-off-by:
-
Darrick J. Wong authored
Shorten the name of xfs_bitmap to xbitmap since the scrub bitmap has nothing to do with the libxfs bitmap. Signed-off-by:
-
Darrick J. Wong authored
Remove the xfs_bitmap_destroy call from the end of xrep_reap_extents because this sort of violates our rule that the function initializing a structure should destroy it. Signed-off-by:
-
- 17 Mar, 2020 1 commit
-
-
Darrick J. Wong authored
When I lifted the code in xfs_alloc_ag_vextent_lastblock out of a loop, I forgot to convert all the accesses to len to be pointer dereferences. Coverity-id: 1457918 Fixes: 5113f8ec ("xfs: clean up weird while loop in xfs_alloc_ag_vextent_near") Signed-off-by:
-
- 15 Mar, 2020 1 commit
-
-
Darrick J. Wong authored
If the xfs_buf_map array allocation in xfs_dabuf_map fails for whatever reason, we bail out with error code zero. This will confuse callers, so make sure that we return ENOMEM. Allocation failure should never happen with the small size of the array, but code defensively anyway. Fixes: 45feef8f ("xfs: refactor xfs_dabuf_map") Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
-
- 13 Mar, 2020 13 commits
-
-
Christoph Hellwig authored
Move the code for verifying the iclog state on a clean unmount into a helper, and instead of checking the iclog state just rely on the shutdown check as they are equivalent. Also remove the ifdef DEBUG as the compiler is smart enough to eliminate the dead code for non-debug builds. Signed-off-by:
-
Christoph Hellwig authored
When the log is shut down all iclogs are in the XLOG_STATE_IOERROR state, which means that xlog_state_want_sync and xlog_state_release_iclog are no-ops. Remove the whole section of code. Signed-off-by:
-
Christoph Hellwig authored
Remove the ignored return value from xfs_log_unmount_write, and also remove a rather pointless assert on the return value from xfs_log_force. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
A shutdown log is a slow failure path. Add an unlikely annotation to it. Signed-off-by:
-
Dave Chinner authored
This is much less widely used than the bc_private union was, so this is done as a single patch. The named union xfs_btree_cur_private goes away and is embedded into the struct xfs_btree_cur_ag as an anonymous union, and the code is modified via this script: $ sed -i 's/priv\.\([abt|refc]\)/\1/g' fs/xfs/*[ch] fs/xfs/*/*[ch] Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
-
Dave Chinner authored
we need to name the btree cursor private structures to be able to pull them out of the deeply nested structure definition they are in now. Based on code extracted from a patchset by Darrick Wong. Signed-off-by:
-
Dave Chinner authored
Rename the union and it's internal structures to the new name and remove the temporary defines that facilitated the change. Signed-off-by:
-
Dave Chinner authored
BPRV is not longer appropriate because bc_private is going away. Script: $ sed -i 's/BTCUR_BPRV/BTCUR_BMBT/g' fs/xfs/*[ch] fs/xfs/*/*[ch] With manual cleanup to the definitions in fs/xfs/libxfs/xfs_btree.h Signed-off-by:
-
Dave Chinner authored
bc_private.b -> bc_ino conversion via script: $ sed -i 's/bc_private\.b/bc_ino/g' fs/xfs/*[ch] fs/xfs/*/*[ch] And then revert the change to the bc_ino #define in fs/xfs/libxfs/xfs_btree.h manually. Signed-off-by:
-
Dave Chinner authored
bc_private.a -> bc_ag conversion via script: `sed -i 's/bc_private\.a/bc_ag/g' fs/xfs/*[ch] fs/xfs/*/*[ch]` And then revert the change to the bc_ag #define in fs/xfs/libxfs/xfs_btree.h manually. Signed-off-by:
-
Dave Chinner authored
Just the defines of the new names - the conversion will be in scripted commits after this. Signed-off-by:
-
Tommi Rantala authored
Commit 263dde86 ("xfs: cleanup xfs_dir2_block_getdents") introduced a getdents regression, when it converted the pointer arithmetics to offset calculations: offset is updated in the loop already for the next iteration, but the updated offset value is used incorrectly in two places, where we should have used the not-yet-updated value. This caused for example "git clean -ffdx" failures to cleanup certain directory structures when running in a container. Fix the regression by making sure we use proper offset in the loop body. Thanks to Christoph Hellwig for suggestion how to best fix the code. Cc: Christoph Hellwig <hch@lst.de> Fixes: 263dde86 ("xfs: cleanup xfs_dir2_block_getdents") Signed-off-by:
Tommi Rantala <tommi.t.rantala@nokia.com> Reviewed-by:
-
- 12 Mar, 2020 8 commits
-
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Darrick J. Wong authored
In xchk_xattr_listent, we attempt to validate the extended attribute hash structures by performing a attr lookup by (hashed) name. If the lookup returns ENODATA, that means that the hash information is corrupt. The _process_error functions don't catch this, so we have to add that explicitly. Signed-off-by:
-
Darrick J. Wong authored
In xchk_dir_actor, we attempt to validate the directory hash structures by performing a directory entry lookup by (hashed) name. If the lookup returns ENOENT, that means that the hash information is corrupt. The _process_error functions don't catch this, so we have to add that explicitly. Signed-off-by:
-
Darrick J. Wong authored
Check the owner field of dir3 block headers. If it's corrupt, release the buffer and return EFSCORRUPTED. All callers handle this properly. Signed-off-by:
-
Darrick J. Wong authored
Check the owner field of dir3 data block headers. If it's corrupt, release the buffer and return EFSCORRUPTED. All callers handle this properly. Signed-off-by:
-
Darrick J. Wong authored
Check the owner field of dir3 free block headers and reject the metadata if there's something wrong with it. Signed-off-by:
Allison Collins <allison.henderson@oracle.com> Reviewed-by:
-
Darrick J. Wong authored
If we decide that a directory free block is corrupt, we must take care not to leak a buffer pointer to the caller. After xfs_trans_brelse returns, the buffer can be freed or reused, which means that we have to set *bpp back to NULL. Callers are supposed to notice the nonzero return value and not use the buffer pointer, but we should code more defensively, even if all current callers handle this situation correctly. Fixes: de14c5f5 ("xfs: verify free block header fields") Signed-off-by:
-
Darrick J. Wong authored
xfs_verifier_error is supposed to be called on a corrupt metadata buffer from within a buffer verifier function, whereas xfs_buf_mark_corrupt is the function to be called when a piece of code has read a buffer and catches something that a read verifier cannot. The first function sets b_error anticipating that the low level buffer handling code will see the nonzero b_error and clear XBF_DONE on the buffer, whereas the second function does not. Since xfs_dir3_free_header_check examines fields in the dir free block header that require more context than can be provided to read verifiers, we must call xfs_buf_mark_corrupt when it finds a problem. Switching the calls has a secondary effect that we no longer corrupt the buffer state by setting b_error and leaving XBF_DONE set. When /that/ happens, we'll trip over various state assertions (most commonly the b_error check in xfs_buf_reverify) on a subsequent attempt to read the buffer. Fixes: bc1a09b8 ("xfs: refactor verifier callers to print address of failing check") Signed-off-by:
-
