Pull more documentation updates from Jonathan Corbet:
 "A handful of late-arriving documentation fixes, plus one Spanish
  translation that has been ready for some time but got applied late"

* tag 'docs-6.4-2' of git://git.lwn.net/linux:
  docs/sp_SP: Add translation of process/adding-syscalls
  CREDITS: Update email address for Mat Martineau
  Documentation: update kernel stack for x86_64
  docs: Remove unnecessary unicode character
  docs: fix "Reviewd" typo
  Documentation: timers: hrtimers: Make hybrid union historical
  docs/admin-guide/mm/ksm.rst fix intraface -> interface typo
  doc:it_IT: fix some typos

Pull more tracing updates from Steven Rostedt:

 - Make buffer_percent read/write.

   The buffer_percent file is how users can state how long to block on
   the tracing buffer depending on how much is in the buffer. When it
   hits the "buffer_percent" it will wake the task waiting on the
   buffer. For some reason it was set to read-only.

   This was not noticed because testing was done as root without
   SELinux, but with SELinux it will prevent even root to write to it
   without having CAP_DAC_OVERRIDE.

 - The "touched_functions" was added this merge window, but one of the
   reasons for adding it was not implemented.

   That was to show what functions were not only touched, but had either
   a direct trampoline attached to it, or a kprobe or live kernel
   patching that can "hijack" the function to run a different function.
   The point is to know if there's functions in the kernel that may not
   be behaving as the kernel code shows. This can be used for debugging.

   TODO: Add this information to kernel oops too.

* tag 'trace-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ftrace: Add MODIFIED flag to show if IPMODIFY or direct was attached
  tracing: Fix permissions for the buffer_percent file

Pull locking updates from Ingo Molnar:

 - Introduce local{,64}_try_cmpxchg() - a slightly more optimal
   primitive, which will be used in perf events ring-buffer code

 - Simplify/modify rwsems on PREEMPT_RT, to address writer starvation

 - Misc cleanups/fixes

* tag 'locking-core-2023-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: Correct (cmp)xchg() instrumentation
  locking/x86: Define arch_try_cmpxchg_local()
  locking/arch: Wire up local_try_cmpxchg()
  locking/generic: Wire up local{,64}_try_cmpxchg()
  locking/atomic: Add generic try_cmpxchg{,64}_local() support
  locking/rwbase: Mitigate indefinite writer starvation
  locking/arch: Rename all internal __xchg() names to __arch_xchg()

Merge my x86 uaccess updates branch.

The LAM ("Linear Address Masking") updates in this release made me
unhappy about how "access_ok()" was done, and it actually turned out to
have a couple of small bugs in it too.  This is my cleanup of the code:

 - use the sign bit of the __user pointer rather than masking the
   address and checking it against the TASK_SIZE range.

   We already did this part for the get/put_user() side, but
   'access_ok()' did the naïve "mask and range check" thing, which not
   only generates nasty code, but also ended up meaning that __access_ok
   itself didn't do a good job, and so copy_from_user_nmi() didn't get
   the check right.

 - move all the code that is 64-bit only into the 64-bit version of the
   header file, so that we don't unnecessarily pollute the shared x86
   code and make it look like LAM might work in 32-bit too.

 - fix a bug in the address masking (that doesn't end up mattering: in
   this case the fix was to just remove the buggy code entirely).

 - a couple of trivial cleanups and added commentary about the
   access_ok() rules.

* x86-uaccess-cleanup:
  x86-64: mm: clarify the 'positive addresses' user address rules
  x86: mm: remove 'sign' games from LAM untagged_addr*() macros
  x86: uaccess: move 32-bit and 64-bit parts into proper <asm/uaccess_N.h> header
  x86: mm: remove architecture-specific 'access_ok()' define
  x86-64: make access_ok() independent of LAM

Pull more RISC-V updates from Palmer Dabbelt:

 - Support for hibernation

 - The .rela.dyn section has been moved to the init area

 - A fix for the SBI probing to allow for implementation-defined
   behavior

 - Various other fixes and cleanups throughout the tree

* tag 'riscv-for-linus-6.4-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: include cpufeature.h in cpufeature.c
  riscv: Move .rela.dyn to the init sections
  dt-bindings: riscv: explicitly mention assumption of Zicsr & Zifencei support
  riscv: compat_syscall_table: Fixup compile warning
  RISC-V: fixup in-flight collision with ARCH_WANT_OPTIMIZE_VMEMMAP rename
  RISC-V: fix sifive and thead section mismatches in errata
  RISC-V: Align SBI probe implementation with spec
  riscv: mm: remove redundant parameter of create_fdt_early_page_table
  riscv: Adjust dependencies of HAVE_DYNAMIC_FTRACE selection
  RISC-V: Add arch functions to support hibernation/suspend-to-disk
  RISC-V: mm: Enable huge page support to kernel_page_present() function
  RISC-V: Factor out common code of __cpu_resume_enter()
  RISC-V: Change suspend_save_csrs and suspend_restore_csrs to public function

Pull more kvm updates from Paolo Bonzini:
 "This includes the 6.4 changes for RISC-V, and a few bugfix patches for
  other architectures. For x86, this closes a longstanding performance
  issue in the newer and (usually) more scalable page table management
  code.

  RISC-V:
   - ONE_REG interface to enable/disable SBI extensions
   - Zbb extension for Guest/VM
   - AIA CSR virtualization

  x86:
   - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU
     can result in the root being freed even though the root is
     completely valid and can be reused as-is (with a TLB flush).

  s390:
   - A couple of bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix race in gmap_make_secure()
  KVM: s390: pv: fix asynchronous teardown for small VMs
  KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated
  RISC-V: KVM: Virtualize per-HART AIA CSRs
  RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask
  RISC-V: KVM: Add ONE_REG interface for AIA CSRs
  RISC-V: KVM: Implement subtype for CSR ONE_REG interface
  RISC-V: KVM: Initial skeletal support for AIA
  RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines
  RISC-V: Detect AIA CSRs from ISA string
  RISC-V: Add AIA related CSR defines
  RISC-V: KVM: Allow Zbb extension for Guest/VM
  RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions
  RISC-V: KVM: Alphabetize selects
  KVM: RISC-V: Retry fault if vma_lookup() results become invalid

Pull ACPI fix from Rafael Wysocki:
 "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during
  the 6.3 cycle, that turned out to do more harm than help (Hans de
  Goede)"

* tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530

Pull thermal control fixes from Rafael Wysocki:
 "These fix a NULL pointer dereference in the Intel powerclamp driver
  introduced during the 6.3 cycle and update MAINTAINERS to match recent
  code changes.

  Specifics:

   - Fix NULL pointer access in the Intel powerclamp thermal driver that
     occurs on attempts to set the cooling device state to 0 in the
     default configuration (Srinivas Pandruvada)

   - Drop the stale MAINTAINERS entry for the Intel Menlow thermal
     driver that has been removed recently (Lukas Bulwahn)"

* tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER
  thermal: intel: powerclamp: Fix NULL pointer access issue

Pull phy fixes from Vinod Koul:

 - Fix for mediatek driver warning for variable used uninitialized and
   for wrong pll math

* tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: mediatek: hdmi: mt8195: fix wrong pll calculus
  phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc

Pull more drm fixes from Dave Airlie:
 "This is the fixes for the last couple of weeks for i915 and last 3
  weeks for amdgpu, lots of them but pretty scattered around and all
  pretty small.

  amdgpu:
   - SR-IOV fixes
   - DCN 3.2 fixes
   - DC mclk handling fixes
   - eDP fixes
   - SubVP fixes
   - HDCP regression fix
   - DSC fixes
   - DC FP fixes
   - DCN 3.x fixes
   - Display flickering fix when switching between vram and gtt
   - Z8 power saving fix
   - Fix hang when skipping modeset
   - GPU reset fixes
   - Doorbell fix when resizing BARs
   - Fix spurious warnings in gmc
   - Locking fix for AMDGPU_SCHED IOCTL
   - SR-IOV fix
   - DCN 3.1.4 fix
   - DCN 3.2 fix
   - Fix job cleanup when CS is aborted

  i915:
   - skl pipe source size check
   - mtl transcoder mask fix
   - DSI power on sequence fix
   - GuC versioning corner case fix"

* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
  drm/amdgpu: drop redundant sched job cleanup when cs is aborted
  drm/amd/display: filter out invalid bits in pipe_fuses
  drm/amd/display: Change default Z8 watermark values
  drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
  drm/amdgpu: add a missing lock for AMDGPU_SCHED
  drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
  drm/amdgpu: Enable doorbell selfring after resize FB BAR
  drm/amdgpu: Use the default reset when loading or reloading the driver
  drm/amdgpu: Fix mode2 reset for sienna cichlid
  drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
  drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
  drm/i915/guc: Actually return an error if GuC version range check fails
  drm/amd/display: Lowering min Z8 residency time
  drm/amd/display: fix flickering caused by S/G mode
  drm/amd/display: Set min_width and min_height capability for DCN30
  drm/amd/display: Isolate remaining FPU code in DCN32
  drm/amd/display: Update bounding box values for DCN321
  drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
  ...

If a function had ever had IPMODIFY or DIRECT attached to it, where this
is how live kernel patching and BPF overrides work, mark them and display
an "M" in the enabled_functions and touched_functions files. This can be
used for debugging. If a function had been modified and later there's a bug
in the code related to that function, this can be used to know if the cause
is possibly from a live kernel patch or a BPF program that changed the
behavior of the code.

Also update the documentation on the enabled_functions and
touched_functions output, as it was missing direct callers and CALL_OPS.
And include this new modify attribute.

Link: https://lore.kernel.org/linux-trace-kernel/20230502213233.004e3ae4@gandalf.local.home

Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Commit 2b6a7409 ("thermal: intel: menlow: Get rid of this driver")
removes the driver drivers/thermal/intel/intel_menlow.c, but misses to
remove its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS.

Fixes: 2b6a7409 ("thermal: intel: menlow: Get rid of this driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'kvm-s390-next-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

For 6.4

Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can
result in the root being freed even though the root is completely valid and
can be reused as-is (with a TLB flush).

KVM/riscv changes for 6.4

- ONE_REG interface to enable/disable SBI extensions
- Zbb extension for Guest/VM
- AIA CSR virtualization

Pull watchdog updates from Wim Van Sebroeck:

 - Add watchdog driver for StarFive JH7100 and JH7110 Soc

 - Add Rockchip RK3588 devices

 - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices

 - Add Mediatke MT8365 and MT6735 devices

 - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog

 - Convert watchdog platform drivers to return void on the remove
   callback

 - Convert to devm_clk_get_enabled() helpers

 - ... and other small fixes and improvements

* tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits)
  watchdog: dw_wdt: Simplify clk management
  watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()
  watchdog: starfive: Fix the warning of starfive_wdt_match
  watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled
  MAINTAINERS: Add fragment for Xilinx watchdog driver
  watchdog: menz069_wdt: fix timeout setting
  watchdog: menz069_wdt: fix watchdog initialisation
  dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
  watchdog: loongson1_wdt: Implement restart handler
  dt-bindings: watchdog: Document Qualcomm SM6115 watchdog
  dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names
  dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties
  dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties
  dt-bindings: watchdog: arm,sp805: drop unneeded minItems
  dt-bindings: watchdog: drop duplicated GPIO watchdog bindings
  dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT
  drivers: watchdog: Add StarFive Watchdog driver
  dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
  dt-bindings: watchdog: indentation, quotes and white-space cleanup
  watchdog: ebc-c384_wdt: Mark status as orphaned
  ...

Merge tag 'drm-intel-next-fixes-2023-05-04-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Add missing GPU transcoder masks for MTL and fix DSI power on sequence
for Nextbook Ares 8A. Fix GuC version corner case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-05-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.4-2023-05-03:

amdgpu:
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

One cc stable for pipe source size check on SKL+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.4-2023-04-26:

amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com

Pull ceph updates from Ilya Dryomov:
 "A few filesystem improvements, with a rather nasty use-after-free fix
  from Xiubo intended for stable"

* tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client:
  ceph: reorder fields in 'struct ceph_snapid_map'
  ceph: pass ino# instead of old_dentry if it's disconnected
  ceph: fix potential use-after-free bug when trimming caps
  ceph: implement writeback livelock avoidance using page tagging
  ceph: do not print the whole xattr value if it's too long

Pull 9p updates from Eric Van Hensbergen:
 "This includes a number of patches that didn't quite make the cut last
  merge window while we addressed some outstanding issues and review
  comments. It includes some new caching modes for those that only want
  readahead caches and reworks how we do writeback caching so we are not
  keeping extra references around which both causes performance problems
  and uses lots of additional resources on the server.

  It also includes a new flag to force disabling of xattrs which can
  also cause major performance issues, particularly if the underlying
  filesystem on the server doesn't support them.

  Finally it adds a couple of additional mount options to better support
  directio and enabling caches when the server doesn't support
  qid.version.

  There was one late-breaking bug report that has also been included as
  its own patch where I forgot to propagate an embarassing bit-logic fix
  to the various variations of open"

* tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Fix bit operation logic error
  fs/9p: Rework cache modes and add new options to Documentation
  fs/9p: remove writeback fid and fix per-file modes
  fs/9p: Add new mount modes
  9p: Add additional debug flags and open modes
  fs/9p: allow disable of xattr support on mount
  fs/9p: Remove unnecessary superblock flags
  fs/9p: Consolidate file operations and add readahead and writeback

Merge tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull hitfixes from Andrew Morton:
 "Five hotfixes.  Three are cc:stable, two for this -rc cycle"

* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: change per-VMA lock statistics to be disabled by default
  MAINTAINERS: update Michal Simek's email
  mm/mempolicy: correctly update prev when policy is equal on mbind
  relayfs: fix out-of-bounds access in relay_file_read
  kasan: hw_tags: avoid invalid virt_to_page()

Pull more MM updates from Andrew Morton:

 - Some DAMON cleanups from Kefeng Wang

 - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
   ioctl's behavior more similar to KSM's behavior.

[ Andrew called these "final", but I suspect we'll have a series fixing
  up the fact that the last commit in the dmapools series in the
  previous pull seems to have unintentionally just reverted all the
  other commits in the same series..   - Linus ]

* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: hwpoison: coredump: support recovery from dump_user_range()
  mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
  mm/ksm: move disabling KSM from s390/gmap code to KSM code
  selftests/ksm: ksm_functional_tests: add prctl unmerge test
  mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
  mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
  mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
  mm/damon/paddr: minor refactor of damon_pa_pageout()

Pull arm64 fixes from Will Deacon:
 "A few arm64 fixes that came in during the merge window for -rc1.

  The main thing is restoring the pointer authentication hwcaps, which
  disappeared during some recent refactoring

   - Fix regression in CPU erratum workaround when disabling the MMU

   - Fix detection of pointer authentication hwcaps

   - Avoid writeable, executable ELF sections in vmlinux"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: lds: move .got section out of .text
  arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text
  arm64: cpufeature: Fix pointer auth hwcaps
  arm64: Fix label placement in record_mmu_state()

Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Better backtraces for humanization

 - Relay BCE exceptions to userland as SIGSEGV

 - Provide kernel fpu functions

 - Optimize memory ops (memset/memcpy/memmove)

 - Optimize checksum and crc32(c) calculation

 - Add ARCH_HAS_FORTIFY_SOURCE selection

 - Add function error injection support

 - Add ftrace with direct call support

 - Add basic perf tools support

* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  tools/perf: Add basic support for LoongArch
  LoongArch: ftrace: Add direct call trampoline samples support
  LoongArch: ftrace: Add direct call support
  LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
  LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
  LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
  LoongArch: Add support for function error injection
  LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
  LoongArch: crypto: Add crc32 and crc32c hw acceleration
  LoongArch: Add checksum optimization for 64-bit system
  LoongArch: Optimize memory ops (memset/memcpy/memmove)
  LoongArch: Provide kernel fpu functions
  LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
  LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
  LoongArch: Humanize the ESTAT line when showing registers
  LoongArch: Humanize the ECFG line when showing registers
  LoongArch: Humanize the EUEN line when showing registers
  LoongArch: Humanize the PRMD line when showing registers
  LoongArch: Humanize the CRMD line when showing registers
  LoongArch: Fix format of CSR lines during show_regs()
  ...

Pull arch/csky updates from Guo Ren:

 - Remove CPU_TLB_SIZE config

 - Prevent spurious page faults

* tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux:
  csky: mmu: Prevent spurious page faults
  csky: remove obsolete config CPU_TLB_SIZE

If cur_state for the powerclamp cooling device is set to the default
minimum state of 0, without setting first to cur_state > 0, this results
in NULL pointer access.

This NULL pointer access happens in the powercap core idle-inject
function idle_inject_set_duration() as there is no NULL check for
idle_inject_device pointer. This pointer must be allocated by calling
idle_inject_register() or idle_inject_register_full().

In the function powerclamp_set_cur_state(), idle_inject_device pointer
is allocated only when the cur_state > 0. But setting 0 without changing
to any other state, idle_inject_set_duration() will be called with a
NULL idle_inject_device pointer.

To address this, just return from powerclamp_set_cur_state() if the
current cooling device state is the same as the last one. Since the
power-up default cooling device state is 0, changing the state to 0
again here will return without calling idle_inject_set_duration().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 8526eb7f ("thermal: intel: powerclamp: Use powercap idle-inject feature")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217386Tested-by: Risto A. Paju <teknohog@iki.fi>
Cc: 6.3+ <stable@kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.

This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.

The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.

Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).

Fixes: a5b2781d ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The clock rate calculus in mtk_hdmi_pll_calc() was wrong when it has
been replaced by 'div_u64'.

Fix the issue by multiplying the values in the denominator instead of
dividing them.

Fixes: 45810d48 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-2-bbad62e64321@baylibre.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
by the kernel test robot.

Fix the issue by removing the variable altogether and testing out the
return value of mtk_hdmi_pll_set_hw()

Fixes: 45810d48 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-1-bbad62e64321@baylibre.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix a potential race in gmap_make_secure() and remove the last user of
follow_page() without FOLL_GET.

The old code is locking something it doesn't have a reference to, and
as explained by Jason and David in this discussion:
https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
it can lead to all kind of bad things, including the page getting
unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the
unlock_page() would target the wrong bit.
There is also another race with the FOLL_WRITE, which could race
between the follow_page() and the get_locked_pte().

The main point is to remove the last use of follow_page() without
FOLL_GET or FOLL_PIN, removing the races can be considered a nice
bonus.

Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 214d9bbc ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230428092753.27913-2-imbrenda@linux.ibm.com>

On machines without the Destroy Secure Configuration Fast UVC, the
topmost level of page tables is set aside and freed asynchronously
as last step of the asynchronous teardown.

Each gmap has a host_to_guest radix tree mapping host (userspace)
addresses (with 1M granularity) to gmap segment table entries (pmds).

If a guest is smaller than 2GB, the topmost level of page tables is the
segment table (i.e. there are only 2 levels). Replacing it means that
the pointers in the host_to_guest mapping would become stale and cause
all kinds of nasty issues.

This patch fixes the issue by disallowing asynchronous teardown for
guests with only 2 levels of page tables. Userspace should (and already
does) try using the normal destroy if the asynchronous one fails.

Update s390_replace_asce so it refuses to replace segment type ASCEs.
This is still needed in case the normal destroy VM fails.

Fixes: fb491d55 ("KVM: s390: pv: asynchronous destroy for reboot")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230421085036.52511-2-imbrenda@linux.ibm.com>

Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
Reading pipe_fuses from register may have invalid bits set, which may
 affect the num_pipes erroneously.

[How]
Add read_pipes_fuses() call and filter bits based on expected number
 of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

mgr->ctx_handles should be protected by mgr->lock.

v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As made mention of in commit 08c677cb ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af5561
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.

[   82.340264] Call Trace:
[   82.340265]  <TASK>
[   82.340269]  gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[   82.340447]  gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[   82.340623]  amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[   82.340789]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[   82.340955]  amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[   82.341122]  amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[   82.341359]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[   82.341529]  process_one_work+0x21d/0x3f0
[   82.341535]  worker_thread+0x1fa/0x3c0
[   82.341538]  ? process_one_work+0x3f0/0x3f0
[   82.341540]  kthread+0xff/0x130
[   82.341544]  ? kthread_complete_and_exit+0x20/0x20
[   82.341547]  ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org