- 04 Apr, 2017 14 commits
-
-
Parav Pandit authored
This patch introduces helper function for checking controller status during admin and io command processing which returns u16 status. As to bring consistency on returning status, other friend functions also now return u16 status instead of int to match the spec. As part of the theseerror log prints in also prints qid on which command error occured. Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Parav Pandit authored
This patch avoids printing "nvmet:" twice in error logs as its already coming through pr_fmt macro. Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Sagi Grimberg authored
Instead of parsing address strings, use a generic helper. Acked-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Sagi Grimberg authored
Both the destination and the host addresses are now parsed using inet_pton_with_scope helper. We also get ipv6 (with address scopes support). Reviewed-by:
-
Sagi Grimberg authored
Instead of parsing address strings, use a generic helper. This also adds ipv6 (with address scopes) support. Reviewed-by:
-
Sagi Grimberg authored
Several locations in the stack need to handle ipv4/ipv6 (with scope) and port strings conversion to sockaddr. Add a helper that takes either AF_INET, AF_INET6 or AF_UNSPEC (for wildcard) to centralize this handling. Suggested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Sagi Grimberg authored
Signed-off-by:
-
Sagi Grimberg authored
The target might be occupied with multiple hosts so lets give it some more grace before failing the connection establishment. Signed-off-by:
-
Sagi Grimberg authored
If we are attacked with establishments/teradowns we need to make sure we do not consume too much system memory. Thus let ongoing controller teardowns complete before accepting new controller establishments. Signed-off-by:
-
Sagi Grimberg authored
If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by:
-
Sagi Grimberg authored
When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it. Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables. Reported-by:
Yi Zhang <yizhan@redhat.com> Reported-by:
Raju Rangoju <rajur@chelsio.com> Reviewed-by:
-
Sagi Grimberg authored
percpu_ref_kill is not enough to prevent subsequent percpu_ref_tryget_live from failing. Hence call perfcpu_ref_kill_confirm to make it safe. Reviewed-by:
-
Sagi Grimberg authored
If a cpu unplug event has occured, we need to take the minimum of the provided nr_io_queues and the number of online cpus, otherwise we won't be able to connect them as blk-mq mapping won't dispatch to those queues. Reviewed-by:
-
Sagi Grimberg authored
we need to destroy the nvmet sq and let it finish gracefully before continue to cleanup the queue. Reviewed-by:
-
- 31 Mar, 2017 1 commit
-
-
Eric Biggers authored
Constify all instances of blk_mq_ops, as they are never modified. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
- 30 Mar, 2017 4 commits
-
-
Jens Axboe authored
This adds a new module parameter to null_blk, blocking. If set, null_blk will set the BLK_MQ_F_BLOCKING flag, indicating that it sometimes/always needs to block in its ->queue_rq() function. The intent is to help find regressions in blocking drivers, since not many of them exist. If null_blk is loaded with submit_queues > 1 and blocking=1, this shows the regression recently fixed by bf4907c0. Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Jens Axboe authored
Commit a4d907b6 unified the single and multi queue request handlers, but in the process, it also screwed up the locking balance and calls blk_mq_try_issue_directly() with the ctx preempt lock held. This is a problem for drivers that have set BLK_MQ_F_BLOCKING, since now they can't reliably sleep. While in there, protect against similar issues in the future, by adding a might_sleep() trigger in the BLOCKING path for direct issue or queue run. Reported-by:
Josef Bacik <josef@toxicpanda.com> Tested-by:
-
Colin Ian King authored
trivial fix to spelling mistake in pr_err error message Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Minchan Kim authored
In blk_mq_alloc_request_hctx, blk_mq_sched_get_request doesn't get sw context so we don't need to put the context with blk_mq_put_ctx. Unless, we will see preempt counter underflow. Cc: Omar Sandoval <osandov@fb.com> Signed-off-by:
Minchan Kim <minchan@kernel.org> Reviewed-by:
-
- 29 Mar, 2017 14 commits
-
-
Jens Axboe authored
Currently we return true in blk_mq_dispatch_rq_list() if we queued IO successfully, but we really want to return whether or not the we made progress. Progress includes if we got an error return. If we don't, this can lead to a hang in blk_mq_sched_dispatch_requests() when a driver is draining IO by returning BLK_MQ_QUEUE_ERROR instead of manually ending the IO in error and return BLK_MQ_QUEUE_OK. Tested-by:
Omar Sandoval <osandov@fb.com> Signed-off-by:
-
Josef Bacik authored
When try to issue a request directly and we fail we will requeue the request, but call blk_mq_end_request() as well. This leads to the completed request being on a queuelist and getting ended twice, which causes list corruption in schedulers and other shenanigans. Signed-off-by:
Josef Bacik <jbacik@fb.com> Reviewed-by:
Ming Lei <tom.leiming@gmail.com> Reviewed-by:
-
Tahsin Erdogan authored
blkg_conf_prep() currently calls blkg_lookup_create() while holding request queue spinlock. This means allocating memory for struct blkcg_gq has to be made non-blocking. This causes occasional -ENOMEM failures in call paths like below: pcpu_alloc+0x68f/0x710 __alloc_percpu_gfp+0xd/0x10 __percpu_counter_init+0x55/0xc0 cfq_pd_alloc+0x3b2/0x4e0 blkg_alloc+0x187/0x230 blkg_create+0x489/0x670 blkg_lookup_create+0x9a/0x230 blkg_conf_prep+0x1fb/0x240 __cfqg_set_weight_device.isra.105+0x5c/0x180 cfq_set_weight_on_dfl+0x69/0xc0 cgroup_file_write+0x39/0x1c0 kernfs_fop_write+0x13f/0x1d0 __vfs_write+0x23/0x120 vfs_write+0xc2/0x1f0 SyS_write+0x44/0xb0 entry_SYSCALL_64_fastpath+0x18/0xad In the code path above, percpu allocator cannot call vmalloc() due to queue spinlock. A failure in this call path gives grief to tools which are trying to configure io weights. We see occasional failures happen shortly after reboots even when system is not under any memory pressure. Machines with a lot of cpus are more vulnerable to this condition. Do struct blkcg_gq allocations outside the queue spinlock to allow blocking during memory allocations. Suggested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Tahsin Erdogan <tahsin@google.com> Acked-by:
-
Jens Axboe authored
I inadvertently applied the v5 version of this patch, whereas the agreed upon version was v5. Revert this one so we can apply the right one. This reverts commit 7fc6b87a.
-
Jens Axboe authored
Signed-off-by: -
Sagi Grimberg authored
Signed-off-by:
-
Omar Sandoval authored
CONFIG_DEBUG_TEST_DRIVER_REMOVE found a possible leak of q->rq_wb when a request queue is reregistered. This has been a problem since wbt was introduced, but the WARN_ON(!list_empty(&stats->callbacks)) in the blk-stat rework exposed it. Fix it by cleaning up wbt when we unregister the queue. Fixes: 87760e5e ("block: hook up writeback throttling") Signed-off-by:
-
Omar Sandoval authored
blk_alloc_queue_node() already allocates q->stats, so blk_mq_init_allocated_queue() is overwriting it with a new allocation. Fixes: a83b576c ("block: fix stacked driver stats init and free") Reviewed-by:
-
Omar Sandoval authored
Now that the remaining drivers have been converted to one request queue per gendisk, let's warn if a request queue gets registered more than once. This will catch future drivers which might do it inadvertently or any old drivers that I may have missed. Signed-off-by:
-
Ming Lei authored
Before commit 780db207(blk-mq: decouble blk-mq freezing from generic bypassing), the dying flag is checked before entering queue, and Tejun converts the checking into .mq_freeze_depth, and assumes the counter is increased just after dying flag is set. Unfortunately we doesn't do that in blk_set_queue_dying(). This patch calls blk_freeze_queue_start() in blk_set_queue_dying(), so that we can block new I/O coming once the queue is set as dying. Given blk_set_queue_dying() is always called in remove path of block device, and queue will be cleaned up later, we don't need to worry about undoing the counter. Cc: Tejun Heo <tj@kernel.org> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Ming Lei authored
As the .q_usage_counter is used by both legacy and mq path, we need to block new I/O if queue becomes dead in blk_queue_enter(). So rename it and we can use this function in both paths. Reviewed-by:
-
Ming Lei authored
Without the barrier, reading DEAD flag of .q_usage_counter and reading .mq_freeze_depth may be reordered, then the following wait_event_interruptible() may never return. Reviewed-by:
-
Ming Lei authored
This patch adds comment on two races related with timeout handler: - requeue from queue busy vs. timeout - rq free & reallocation vs. timeout Both the races themselves and current solution aren't explicit enough, so add comments on them. Cc: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
-
Ming Lei authored
When iterating busy requests in timeout handler, if the STARTED flag of one request isn't set, that means the request is being processed in block layer or driver, and isn't submitted to hardware yet. In current implementation of blk_mq_check_expired(), if the request queue becomes dying, un-started requests are handled as being completed/freed immediately. This way is wrong, and can cause rq corruption or double allocation[1][2], when doing I/O and removing&resetting NVMe device at the sametime. This patch fixes several issues reported by Yi Zhang. [1]. oops log 1 [ 581.789754] ------------[ cut here ]------------ [ 581.789758] kernel BUG at block/blk-mq.c:374! [ 581.789760] invalid opcode: 0000 [#1] SMP [ 581.789761] Modules linked in: vfat fat ipmi_ssif intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm nvme irqbypass crct10dif_pclmul nvme_core crc32_pclmul ghash_clmulni_intel intel_cstate ipmi_si mei_me ipmi_devintf intel_uncore sg ipmi_msghandler intel_rapl_perf iTCO_wdt mei iTCO_vendor_support mxm_wmi lpc_ich dcdbas shpchp pcspkr acpi_power_meter wmi nfsd auth_rpcgss nfs_acl lockd dm_multipath grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ahci libahci crc32c_intel tg3 libata megaraid_sas i2c_core ptp fjes pps_core dm_mirror dm_region_hash dm_log dm_mod [ 581.789796] CPU: 1 PID: 1617 Comm: kworker/1:1H Not tainted 4.10.0.bz1420297+ #4 [ 581.789797] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 581.789804] Workqueue: kblockd blk_mq_timeout_work [ 581.789806] task: ffff8804721c8000 task.stack: ffffc90006ee4000 [ 581.789809] RIP: 0010:blk_mq_end_request+0x58/0x70 [ 581.789810] RSP: 0018:ffffc90006ee7d50 EFLAGS: 00010202 [ 581.789811] RAX: 0000000000000001 RBX: ffff8802e4195340 RCX: ffff88028e2f4b88 [ 581.789812] RDX: 0000000000001000 RSI: 0000000000001000 RDI: 0000000000000000 [ 581.789813] RBP: ffffc90006ee7d60 R08: 0000000000000003 R09: ffff88028e2f4b00 [ 581.789814] R10: 0000000000001000 R11: 0000000000000001 R12: 00000000fffffffb [ 581.789815] R13: ffff88042abe5780 R14: 000000000000002d R15: ffff88046fbdff80 [ 581.789817] FS: 0000000000000000(0000) GS:ffff88047fc00000(0000) knlGS:0000000000000000 [ 581.789818] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 581.789819] CR2: 00007f64f403a008 CR3: 000000014d078000 CR4: 00000000001406e0 [ 581.789820] Call Trace: [ 581.789825] blk_mq_check_expired+0x76/0x80 [ 581.789828] bt_iter+0x45/0x50 [ 581.789830] blk_mq_queue_tag_busy_iter+0xdd/0x1f0 [ 581.789832] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789833] ? blk_mq_rq_timed_out+0x70/0x70 [ 581.789840] ? __switch_to+0x140/0x450 [ 581.789841] blk_mq_timeout_work+0x88/0x170 [ 581.789845] process_one_work+0x165/0x410 [ 581.789847] worker_thread+0x137/0x4c0 [ 581.789851] kthread+0x101/0x140 [ 581.789853] ? rescuer_thread+0x3b0/0x3b0 [ 581.789855] ? kthread_park+0x90/0x90 [ 581.789860] ret_from_fork+0x2c/0x40 [ 581.789861] Code: 48 85 c0 74 0d 44 89 e6 48 89 df ff d0 5b 41 5c 5d c3 48 8b bb 70 01 00 00 48 85 ff 75 0f 48 89 df e8 7d f0 ff ff 5b 41 5c 5d c3 <0f> 0b e8 71 f0 ff ff 90 eb e9 0f 1f 40 00 66 2e 0f 1f 84 00 00 [ 581.789882] RIP: blk_mq_end_request+0x58/0x70 RSP: ffffc90006ee7d50 [ 581.789889] ---[ end trace bcaf03d9a14a0a70 ]--- [2]. oops log2 [ 6984.857362] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 6984.857372] IP: nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857373] PGD 0 [ 6984.857374] [ 6984.857376] Oops: 0000 [#1] SMP [ 6984.857379] Modules linked in: ipmi_ssif vfat fat intel_rapl sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ipmi_si iTCO_wdt iTCO_vendor_support mxm_wmi ipmi_devintf intel_cstate sg dcdbas intel_uncore mei_me intel_rapl_perf mei pcspkr lpc_ich ipmi_msghandler shpchp acpi_power_meter wmi nfsd auth_rpcgss dm_multipath nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect crc32c_intel sysimgblt fb_sys_fops ttm nvme drm nvme_core ahci libahci i2c_core tg3 libata ptp megaraid_sas pps_core fjes dm_mirror dm_region_hash dm_log dm_mod [ 6984.857416] CPU: 7 PID: 1635 Comm: kworker/7:1H Not tainted 4.10.0-2.el7.bz1420297.x86_64 #1 [ 6984.857417] Hardware name: Dell Inc. PowerEdge R730xd/072T6D, BIOS 2.2.5 09/06/2016 [ 6984.857427] Workqueue: kblockd blk_mq_run_work_fn [ 6984.857429] task: ffff880476e3da00 task.stack: ffffc90002e90000 [ 6984.857432] RIP: 0010:nvme_queue_rq+0x6e6/0x8cd [nvme] [ 6984.857433] RSP: 0018:ffffc90002e93c50 EFLAGS: 00010246 [ 6984.857434] RAX: 0000000000000000 RBX: ffff880275646600 RCX: 0000000000001000 [ 6984.857435] RDX: 0000000000000fff RSI: 00000002fba2a000 RDI: ffff8804734e6950 [ 6984.857436] RBP: ffffc90002e93d30 R08: 0000000000002000 R09: 0000000000001000 [ 6984.857437] R10: 0000000000001000 R11: 0000000000000000 R12: ffff8804741d8000 [ 6984.857438] R13: 0000000000000040 R14: ffff880475649f80 R15: ffff8804734e6780 [ 6984.857439] FS: 0000000000000000(0000) GS:ffff88047fcc0000(0000) knlGS:0000000000000000 [ 6984.857440] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6984.857442] CR2: 0000000000000010 CR3: 0000000001c09000 CR4: 00000000001406e0 [ 6984.857443] Call Trace: [ 6984.857451] ? mempool_free+0x2b/0x80 [ 6984.857455] ? bio_free+0x4e/0x60 [ 6984.857459] blk_mq_dispatch_rq_list+0xf5/0x230 [ 6984.857462] blk_mq_process_rq_list+0x133/0x170 [ 6984.857465] __blk_mq_run_hw_queue+0x8c/0xa0 [ 6984.857467] blk_mq_run_work_fn+0x12/0x20 [ 6984.857473] process_one_work+0x165/0x410 [ 6984.857475] worker_thread+0x137/0x4c0 [ 6984.857478] kthread+0x101/0x140 [ 6984.857480] ? rescuer_thread+0x3b0/0x3b0 [ 6984.857481] ? kthread_park+0x90/0x90 [ 6984.857489] ret_from_fork+0x2c/0x40 [ 6984.857490] Code: 8b bd 70 ff ff ff 89 95 50 ff ff ff 89 8d 58 ff ff ff 44 89 95 60 ff ff ff e8 b7 dd 12 e1 8b 95 50 ff ff ff 48 89 85 68 ff ff ff <4c> 8b 48 10 44 8b 58 18 8b 8d 58 ff ff ff 44 8b 95 60 ff ff ff [ 6984.857511] RIP: nvme_queue_rq+0x6e6/0x8cd [nvme] RSP: ffffc90002e93c50 [ 6984.857512] CR2: 0000000000000010 [ 6984.895359] ---[ end trace 2d7ceb528432bf83 ]--- Cc: stable@vger.kernel.org Reported-by:
-
- 28 Mar, 2017 7 commits
-
-
Tahsin Erdogan authored
blkg_conf_prep() currently calls blkg_lookup_create() while holding request queue spinlock. This means allocating memory for struct blkcg_gq has to be made non-blocking. This causes occasional -ENOMEM failures in call paths like below: pcpu_alloc+0x68f/0x710 __alloc_percpu_gfp+0xd/0x10 __percpu_counter_init+0x55/0xc0 cfq_pd_alloc+0x3b2/0x4e0 blkg_alloc+0x187/0x230 blkg_create+0x489/0x670 blkg_lookup_create+0x9a/0x230 blkg_conf_prep+0x1fb/0x240 __cfqg_set_weight_device.isra.105+0x5c/0x180 cfq_set_weight_on_dfl+0x69/0xc0 cgroup_file_write+0x39/0x1c0 kernfs_fop_write+0x13f/0x1d0 __vfs_write+0x23/0x120 vfs_write+0xc2/0x1f0 SyS_write+0x44/0xb0 entry_SYSCALL_64_fastpath+0x18/0xad In the code path above, percpu allocator cannot call vmalloc() due to queue spinlock. A failure in this call path gives grief to tools which are trying to configure io weights. We see occasional failures happen shortly after reboots even when system is not under any memory pressure. Machines with a lot of cpus are more vulnerable to this condition. Update blkg_create() function to temporarily drop the rcu and queue locks when it is allowed by gfp mask. Suggested-by:
-
Omar Sandoval authored
Compile-tested only (by hacking it to compile on x86). Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Omar Sandoval authored
Compile-tested only (by hacking it to compile on x86). Signed-off-by:
-
Omar Sandoval authored
Compile-tested only. Cc: Tim Waugh <tim@cyberelk.net> Signed-off-by:
-
Omar Sandoval authored
Compile-tested only. Cc: Tim Waugh <tim@cyberelk.net> Signed-off-by:
-
Omar Sandoval authored
Compile-tested only. Cc: Tim Waugh <tim@cyberelk.net> Signed-off-by:
-
Omar Sandoval authored
Compile-tested only. Signed-off-by:
-
