Grab the vCPU from vm_vcpu_add() directly instead of doing vcpu_get()
after the fact.  This will allow removing vcpu_get() entirely.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Track vCPUs by their 'struct kvm_vcpu' object, and stop assuming that a
vCPU's ID is the same as its index when referencing a vCPU's metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In preparation for taking a vCPU pointer in vCPU-scoped functions, grab
the vCPU(s) created by __vm_vcpu_add() and use the ID from the vCPU
object instead of hardcoding the ID in ioctl() invocations.

Rename init1/init2 => init0/init1 to avoid having odd/confusing code
where vcpu0 consumes init1 and vcpu1 consumes init2.

Note, this change could easily be done when the functions are converted
in the future, and/or the vcpu{0,1} vs. init{1,2} discrepancy could be
ignored, but then there would be no opportunity to poke fun at the
1-based counting scheme.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Track the vCPU's 'struct kvm_vcpu' object in get-reg-list instead of
hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Track vCPUs by their 'struct kvm_vcpu' object in kvm_binary_stats_test,
not by their ID.  The per-vCPU helpers will soon take a vCPU instead of a
VM+vcpu_id pair.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Reference vCPUs by their 'struct kvm_vcpu' object in kvm_page_table_test
instead of by their ID.  This moves selftests one step closer towards
taking a 'struct kvm_vcpu *' instead of VM+vcpu_id for vCPU helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop the @vcpuids parameter from VM creators now that there are no users.
Allowing tests to specify IDs was a gigantic mistake as it resulted in
tests with arbitrary and ultimately meaningless IDs that differed only
because the author used test X intead of test Y as the source for
copy+paste (the de facto standard way to create a KVM selftest).

Except for literally two tests, x86's set_boot_cpu_id and s390's resets,
tests do not and should not care about the vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop all vm_create_default*() helpers, the "default" naming turned out to
terrible as wasn't extensible (hard to have multiple defaults), was a lie
(half the settings were default, half weren't), and failed to capture
relationships between helpers, e.g. compared with the kernel's standard
underscores pattern.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use vm_create_with_vcpus() in max_guest_memory_test and reference vCPUs
by their 'struct kvm_vcpu' object instead of their ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use vm_create() instead of vm_create_default_with_vcpus() in
tsc_scaling_sync.  The existing call doesn't create any vCPUs, and the
guest_code() entry point is set when vm_vcpu_add_default() is invoked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert tprot to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs.  Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==1.  The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage.  If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert diag318_test_handler to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs.  Note, this is
a "functional" change in the sense that the test now creates a vCPU with
vcpu_id==0 instead of vcpu_id==6.  The non-zero VCPU_ID was 100% arbitrary
and added little to no validation coverage.  If testing non-zero vCPU IDs
is desirable for generic tests, that can be done in the future by tweaking
the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pass around a 'struct kvm_vcpu' object instead of a vCPU ID in s390's
memop test.  Pass NULL for the vCPU instead of a magic '-1' ID to
indicate that an ioctl/test should be done at VM scope.

Rename "struct test_vcpu vcpu" to "struct test_info info" in order to
avoid naming collisions (this is the bulk of the diff :-( ).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pass around a 'struct kvm_vcpu' object in the "resets" test instead of
referencing the vCPU by the global VCPU_ID.  Rename the #define for the
vCPU's ID to ARBITRARY_NON_ZERO_VCPU_ID to make it more obvious that (a)
the value matters but (b) is otherwise arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert sync_regs_test to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of passing around vCPU IDs.  Note, this
is a "functional" change in the sense that the test now creates a vCPU
with vcpu_id==0 instead of vcpu_id==5.  The non-zero VCPU_ID was 100%
arbitrary and added little to no validation coverage.  If testing
non-zero vCPU IDs is desirable for generic tests, that can be done in the
future by tweaking the VM creation helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert vm_create_with_one_vcpu to use vm_create_with_vcpus() and pass
around 'struct kvm_vcpu' objects instead of passing around vCPU IDs.
Don't bother with macros for the HALTER versus SENDER indices, the vast
majority of references don't differentiate between the vCPU roles, and
the code that does either has a comment or an explicit reference to the
role, e.g. to halter_guest_code() or sender_guest_code().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use a combination of vm_create(), vm_create_with_vcpus(), and
    vm_vcpu_add() to convert vgic_init from vm_create_default_with_vcpus(),
    and away from referncing vCPUs by ID.

Thus continues the march toward total annihilation of "default" helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Sync the next stage using the VM before said VM is potentially freed by
the TEST_STAGE_HVC_IFACE_FEAT_DISABLED stage.

Opportunistically take a double pointer in anticipation of also having to
set the new vCPU pointer once the test stops hardcoding '0' everywhere.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rework vcpu_{g,s}et_reg() to provide the APIs that tests actually want to
use, and drop the three "one-off" implementations that cropped up due to
the poor API.

Ignore the handful of direct KVM_{G,S}ET_ONE_REG calls that don't fit the
APIs for one reason or another.

No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Use a combination of vm_create(), vm_create_with_vcpus(), and
vm_vcpu_add() to convert vgic_init from vm_create_default_with_vcpus(),
and away from referncing vCPUs by ID.

Thus continues the march toward total annihilation of "default" helpers.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert triple_fault_event_test to use vm_create_with_one_vcpu() and pull
the vCPU's ID from 'struct kvm_vcpu'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert svm_nested_soft_inject_test to use vm_create_with_one_vcpu() and
pull the vCPU's ID from 'struct kvm_vcpu'.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert arch_timer to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert steal_time to use vm_create_with_vcpus() and pass around a
'struct kvm_vcpu' object instead of requiring that the index into the
array of vCPUs for a given vCPU is also the ID of the vCPU.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add a VM creator that "returns" the created vCPUs by filling the provided
array.  This will allow converting multi-vCPU tests away from hardcoded
vCPU IDs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pass around 'struct kvm_vcpu' objects in hardware_disable_test instead of
the VM+vcpu_id (called "index" by the test).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pass around 'struct kvm_vcpu' objects in psci_test instead of relying on
global VCPU_IDs.  Ideally, the test wouldn't have to manually create
vCPUs and thus care about vCPU IDs, but it's not the end of the world and
avoiding that behavior isn't guaranteed to be a net positive (an attempt
at macro shenanigans did not go very well).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rework set_boot_cpu_id to pass around 'struct kvm_vcpu' objects instead
of relying on global VCPU_IDs.  The test is still ugly, but that's
unavoidable since the point of the test is to verify that KVM correctly
assigns VCPU_ID==0 to be the BSP by default.  This is literally one of
two KVM selftests that legitimately needs to care about the exact vCPU
IDs of the vCPUs it creates.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Return the created 'struct kvm_vcpu' object from vm_vcpu_add_default(),
which cleans up a few tests and will eventually allow removing vcpu_get()
entirely.

Opportunistically rename @vcpuid to @vcpu_id to follow preferred kernel
style.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add "arch" into the name of utility functions that are declared in common
code, but (surprise!) have arch-specific implementations.  Shuffle code
around so that all such helpers' declarations are bundled together.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

An "unrestricted guest" is an VMX-only concept, move the relevant helper
to x86-64 code.  Assume most readers can correctly convert underscores to
spaces and oppurtunistically trim the function comment.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Move the declaration of guest_get_vcpuid() to include/aarch64/processor.h,
it is implemented and used only by arm64.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert vgic_irq to use vm_create_with_one_vcpu() and pass around a
'struct kvm_vcpu' object instead of passing around a vCPU ID (which is
always the global VCPU_ID...).

Opportunstically align the indentation for multiple functions'
parameters.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert fix_hypercall_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert debug-exceptions to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert xapic_state_test to use vm_create_with_one_vcpu() and pass around
a 'struct kvm_vcpu' object instead of the raw vCPU ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Track the added 'struct kvm_vcpu' object in tsc_scaling_sync instead of
relying purely on the VM + vcpu_id combination.  Ideally, the test
wouldn't need to manually manage vCPUs, but the need to invoke a per-VM
ioctl before creating vCPUs is not handled by the selftests framework,
at least not yet...
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert system_counter_offset_test to use vm_create_with_one_vcpu() and
pass around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Convert set_memory_region_test to use vm_create_with_one_vcpu() and pass
around a 'struct kvm_vcpu' object instead of using a global VCPU_ID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>