- 05 Dec, 2022 16 commits
-
-
Martin Kaiser authored
Define a struct ieee80211_mgmt in the OnBeacon function. Use it to replace one GetAddr3Ptr call. This is a tiny step towards making GetAddr3Ptr obsolete. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Martin Kaiser <martin@kaiser.cx> Link: https://lore.kernel.org/r/20221126160129.178697-2-martin@kaiser.cxSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jack Schofield authored
Clean up extra uses of blank lines that do not follow the kernel coding style. Issue reported by checkpatch. Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Jack Schofield <schofija@oregonstate.edu> Link: https://lore.kernel.org/r/51edbcc7583d64d3fe5a203d3a8649a695ef4a75.1669872193.git.schofija@oregonstate.eduSigned-off-by:
-
Jack Schofield authored
Void function return statement is not useful in this case. Issue reported by checkpatch. Reviewed-by:
-
Jack Schofield authored
Declarations are to be followed by a blank line. Add to follow Linux Kernel coding style. Issue reported by checkpatch. Reviewed-by:
-
Martin Kaiser authored
Use ieee80211_has_protected to check if the "protected" bit is set. Remove the r8188eu driver's internal macro for this check. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
In function ap2sta_data_frame, we can use is_zero_ether_addr to check for all-zero ethernet addresses. Both pattrib->bssid and mybssid are 16-bit aligned. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
issue_probereq_ex sends a probe request and retries if this fails. There's no point in making the number of retries configurable. Hard-code the value that's used by issue_probereq_ex's only caller. Simplify the code to check the loop condition only once. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
Remove the wait_ms parameter from function issue_probereq_ex. There's only one caller, who requests a waiting time of 1 ms. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Martin Kaiser authored
The only caller of issue_probereq_ex does not check the return value. We can remove it and make issue_probereq_ex a void function. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
YueHaibing authored
The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it, after calling this, dereferencing skb may trigger use-after-free. Found by Smatch. Fixes: 94a79942 ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20221123081253.22296-1-yuehaibing@huawei.comSigned-off-by:
-
Philipp Hortmann authored
int_log is initialized and incremented but never evaluated. Remove resulting dead code. Signed-off-by:
Philipp Hortmann <philipp.g.hortmann@gmail.com> Link: https://lore.kernel.org/r/e2edcde052cc3c47e6e6b94d09e460b8cf6a49a8.1669156825.git.philipp.g.hortmann@gmail.comSigned-off-by:
-
Philipp Hortmann authored
ChannelAccessSetting is never used. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
initialized_at_probe is initialized and never used. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
skb_aggQ is initialized, never used and purged. Remove resulting dead code. Signed-off-by:
-
Philipp Hortmann authored
AcmMethod is initialized and never changed. The evaluation will always have the same result. Remove resulting dead code. Signed-off-by:
-
Dan Carpenter authored
We cannot dereference the "skb" pointer after calling ieee80211_monitor_rx(), because it is a use after free. Fixes: 8fc8598e ("Staging: Added Realtek rtl8192u driver to staging") Signed-off-by:
Dan Carpenter <error27@gmail.com> Link: https://lore.kernel.org/r/Y33BArx3k/aw6yv/@kiliSigned-off-by:
-
- 22 Nov, 2022 8 commits
-
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-569-uwe@kleine-koenig.orgSigned-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Uwe Kleine-König authored
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by:
-
Umang Jain authored
mmal_fmt.remove_padding is defined as a boolean type hence, use boolean values for it instead of 0/1 integers. This enhances code readability. Signed-off-by:
Umang Jain <umang.jain@ideasonboard.com> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by:
Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20221118084244.199909-4-umang.jain@ideasonboard.comSigned-off-by:
-
Umang Jain authored
In commit 7967656f ("coding-style: Clarify the expectations around bool") the check to dis-allow bool structure members was removed from checkpatch.pl. It promotes bool structure members to store boolean values. This enhances code readability. Signed-off-by:
-
Umang Jain authored
This reverts commit 640e7746. In commit 7967656f ("coding-style: Clarify the expectations around bool") the check to dis-allow bool structure members was removed from checkpatch.pl. It promotes bool structure members to store boolean values. This enhances code readability. Signed-off-by:
-
Brent Pappas authored
Replace the macro GDM_TTY_READY with a static inline function to follow the Linux kernel coding style. Signed-off-by:
Brent Pappas <bpappas@pappasbrent.com> Link: https://lore.kernel.org/r/20221117195443.19616-1-bpappas@pappasbrent.comSigned-off-by:
-
Gaosheng Cui authored
Smatch report warning as follows: drivers/staging/vme_user/vme_tsi148.c:1757 tsi148_dma_list_add() warn: '&entry->list' not removed from list In tsi148_dma_list_add(), the error path "goto err_dma" will not remove entry->list from list->entries, but entry will be freed, then list traversal may cause UAF. Fix by removeing it from list->entries before free(). Fixes: b2383c90 ("vme: tsi148: fix first DMA item mapping") Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221117035914.2954454-1-cuigaosheng1@huawei.comSigned-off-by:
-
- 17 Nov, 2022 15 commits
-
-
Philipp Hortmann authored
Rename variable pHTInfo to ht_info to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable InterruptLog to int_log, RxCounter to rx_ctr and bHwRfOffAction to hw_rf_off_action to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable bFilterSourceStationFrame to fltr_src_sta_frame, CCKPresentAttentuation to cck_present_attn and ResetProgress to rst_progress to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable bNetPromiscuousMode to net_promiscuous_md, IntelPromiscuousModeInfo to intel_promiscuous_md_info and bPromiscuousOn to promiscuous_on to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable LinkDetectInfo to link_detect_info to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable RFInProgressTimeOut to rf_in_progress_timeout, bEnableHT to enable_ht and RegChannelPlan to reg_chnl_plan to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable pPSC to psc to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable Regdot11TxHTOperationalRateSet to reg_dot11tx_ht_oper_rate_set, dot11HTOperationalRateSet to dot11ht_oper_rate_set and RegHTSuppRateSet to reg_ht_supp_rate_set to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Philipp Hortmann authored
Rename variable Regdot11HTOperationalRateSet to reg_dot11ht_oper_rate_set, bSupportMode to support_mode and PowerSaveControl to pwr_save_ctrl to avoid CamelCase which is not accepted by checkpatch. Fix unnecessary parentheses warning from checkpatch when used with this variables. Signed-off-by:
-
Philipp Hortmann authored
Rename variable bTxDisableRateFallBack to tx_dis_rate_fallback, RegMaxLPSAwakeIntvl to reg_max_lps_awake_intvl and bTxUseDriverAssingedRate to tx_use_drv_assinged_rate to avoid CamelCase which is not accepted by checkpatch. Signed-off-by:
-
Michael Straube authored
The variable binstallGrpkey is set to _FAIL which is defined as 0. Use false to set the variable to get rid of another use of _FAIL. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
Michael Straube <straube.linux@gmail.com> Link: https://lore.kernel.org/r/20221111083733.3144-5-straube.linux@gmail.comSigned-off-by:
-
Michael Straube authored
Convert the function _rtw_init_xmit_priv() away from returning _FAIL or _SUCCESS which uses inverted error logic. Use the common error logic instead. Return 0 for success and negative values for failure. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Convert the function rtw_xmit_resource_alloc() away from returning _FAIL or _SUCCESS which uses inverted error logic. Use the common error logic instead. Return 0 for success and negative values for failure. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
The function aes_cipher() returns always _SUCCESS and its callers do not use the return value. So we can convert the return type to void and get rid of another use of _SUCCESS. Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150 Signed-off-by:
-
Michael Straube authored
Prefix the names of the following functions with the driver name. The original names are bad for the global namespace. While at it, convert is_IBSS_empty() to all lower case to follow kernel coding style. is_client_associated_to_ap() is_client_associated_to_ibss() is_IBSS_empty() Suggested-by:
-
- 09 Nov, 2022 1 commit
-
-
Deepak R Varma authored
Several ieee80211_* symbol names are extended with _rsl tag using macros. This is done to avoid a conflict when a similar symbol is already in use in another part of kernel and may lead to conflicts. However, most of these base symbol names are not found to being used anywhere in the code and hence are not useful today. These symbols are not used outside of the module and hence can be safely removed. The code continues to use the original symbol names. Suggested-by:
Deepak R Varma <drv@mailo.com> Link: https://lore.kernel.org/r/17f69a042e215c484931a0327fdf7775eea5f918.1667930292.git.drv@mailo.comSigned-off-by:
-
