- 18 Feb, 2017 2 commits
-
-
Gal Pressman authored
[ Upstream commit a100ff3e ] Modifying TIR hash should change selected fields bitmask in addition to the function and key. Formerly, Only on ethool mlx5e_set_rxfh "ethtoo -X" we would not set this field resulting in zeroing of its value, which means no packet fields are used for RX RSS hash calculation thus causing all traffic to arrive in RQ[0]. On driver load out of the box we don't have this issue, since the TIR hash is fully created from scratch. Tested: ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028d ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by:
Gal Pressman <galp@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit f1712c73 ] Zhang Yanmin reported crashes [1] and provided a patch adding a synchronize_rcu() call in can_rx_unregister() The main problem seems that the sockets themselves are not RCU protected. If CAN uses RCU for delivery, then sockets should be freed only after one RCU grace period. Recent kernels could use sock_set_flag(sk, SOCK_RCU_FREE), but let's ease stable backports with the following fix instead. [1] BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff81495e25>] selinux_socket_sock_rcv_skb+0x65/0x2a0 Call Trace: <IRQ> [<ffffffff81485d8c>] security_sock_rcv_skb+0x4c/0x60 [<ffffffff81d55771>] sk_filter+0x41/0x210 [<ffffffff81d12913>] sock_queue_rcv_skb+0x53/0x3a0 [<ffffffff81f0a2b3>] raw_rcv+0x2a3/0x3c0 [<ffffffff81f06eab>] can_rcv_filter+0x12b/0x370 [<ffffffff81f07af9>] can_receive+0xd9/0x120 [<ffffffff81f07beb>] can_rcv+0xab/0x100 [<ffffffff81d362ac>] __netif_receive_skb_core+0xd8c/0x11f0 [<ffffffff81d36734>] __netif_receive_skb+0x24/0xb0 [<ffffffff81d37f67>] process_backlog+0x127/0x280 [<ffffffff81d36f7b>] net_rx_action+0x33b/0x4f0 [<ffffffff810c88d4>] __do_softirq+0x184/0x440 [<ffffffff81f9e86c>] do_softirq_own_stack+0x1c/0x30 <EOI> [<ffffffff810c76fb>] do_softirq.part.18+0x3b/0x40 [<ffffffff810c8bed>] do_softirq+0x1d/0x20 [<ffffffff81d30085>] netif_rx_ni+0xe5/0x110 [<ffffffff8199cc87>] slcan_receive_buf+0x507/0x520 [<ffffffff8167ef7c>] flush_to_ldisc+0x21c/0x230 [<ffffffff810e3baf>] process_one_work+0x24f/0x670 [<ffffffff810e44ed>] worker_thread+0x9d/0x6f0 [<ffffffff810e4450>] ? rescuer_thread+0x480/0x480 [<ffffffff810ebafc>] kthread+0x12c/0x150 [<ffffffff81f9ccef>] ret_from_fork+0x3f/0x70 Reported-by:
Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
- 14 Feb, 2017 38 commits
-
-
Greg Kroah-Hartman authored
-
Peter Zijlstra authored
commit 451d24d1 upstream. Alexei had his box explode because doing read() on a package (rapl/uncore) event that isn't currently scheduled in ends up doing an out-of-bounds load. Rework the code to more explicitly deal with event->oncpu being -1. Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Tested-by:
Alexei Starovoitov <ast@kernel.org> Tested-by:
David Carrillo-Cisneros <davidcc@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: eranian@google.com Fixes: d6a2f903 ("perf/core: Introduce PMU_EV_CAP_READ_ACTIVE_PKG") Link: http://lkml.kernel.org/r/20170131102710.GL6515@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Namhyung Kim authored
commit 8381cdd0 upstream. The -o/--order option is to select column number to sort a diff result. It does the job by adding a hpp field at the beginning of the sort list. But it should not be added to the output field list as it has no callbacks required by a output field. During the setup_sorting(), the perf_hpp__setup_output_field() appends the given sort keys to the output field if it's not there already. Originally it was checked by fmt->list being non-empty. But commit 3f931f2c ("perf hists: Make hpp setup function generic") changed it to check the ->equal callback. Anyways, we don't need to add the pseudo hpp field to the output field list since it won't be used for output. So just skip fields if they have no ->color or ->entry callbacks. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 3f931f2c ("perf hists: Make hpp setup function generic") Link: http://lkml.kernel.org/r/20170118051457.30946-1-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Namhyung Kim authored
commit a1c9f97f upstream. Commit 21e6d842 ("perf diff: Use perf_hpp__register_sort_field interface") changed list_add() to perf_hpp__register_sort_field(). This resulted in a behavior change since the field was added to the tail instead of the head. So the -o option is mostly ignored due to its order in the list. This patch fixes it by adding perf_hpp__prepend_sort_field(). Signed-off-by:
-
Omar Sandoval authored
commit bfeda41d upstream. Since KERN_CONT became meaningful again, lockdep stack traces have had annoying extra newlines, like this: [ 5.561122] -> #1 (B){+.+...}: [ 5.561528] [ 5.561532] [<ffffffff810d8873>] lock_acquire+0xc3/0x210 [ 5.562178] [ 5.562181] [<ffffffff816f6414>] mutex_lock_nested+0x74/0x6d0 [ 5.562861] [ 5.562880] [<ffffffffa01aa3c3>] init_btrfs_fs+0x21/0x196 [btrfs] [ 5.563717] [ 5.563721] [<ffffffff81000472>] do_one_initcall+0x52/0x1b0 [ 5.564554] [ 5.564559] [<ffffffff811a3af6>] do_init_module+0x5f/0x209 [ 5.565357] [ 5.565361] [<ffffffff81122f4d>] load_module+0x218d/0x2b80 [ 5.566020] [ 5.566021] [<ffffffff81123beb>] SyS_finit_module+0xeb/0x120 [ 5.566694] [ 5.566696] [<ffffffff816fd241>] entry_SYSCALL_64_fastpath+0x1f/0xc2 That's happening because each printk() call now gets printed on its own line, and we do a separate call to print the spaces before the symbol. Fix it by doing the printk() directly instead of using the print_ip_sym() helper. Additionally, the symbol address isn't very helpful, so let's get rid of that, too. The final result looks like this: [ 5.194518] -> #1 (B){+.+...}: [ 5.195002] lock_acquire+0xc3/0x210 [ 5.195439] mutex_lock_nested+0x74/0x6d0 [ 5.196491] do_one_initcall+0x52/0x1b0 [ 5.196939] do_init_module+0x5f/0x209 [ 5.197355] load_module+0x218d/0x2b80 [ 5.197792] SyS_finit_module+0xeb/0x120 [ 5.198251] entry_SYSCALL_64_fastpath+0x1f/0xc2 Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Omar Sandoval <osandov@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-team@fb.com Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Link: http://lkml.kernel.org/r/43b4e114724b2bdb0308fa86cb33aa07d3d67fad.1486510315.git.osandov@fb.comSigned-off-by:
-
Eyal Itkin authored
commit 647bf3d8 upstream. Update the range check to avoid integer-overflow in edge case. Resolves CVE 2016-8636. Signed-off-by:
Eyal Itkin <eyal.itkin@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Eyal Itkin authored
commit 628f07d3 upstream. Update the response's resid field when larger than MTU, instead of only updating the local resid variable. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
-
Yazen Ghannam authored
commit 08b25963 upstream. After: a33d3317 ("x86/CPU/AMD: Fix Bulldozer topology") our SMT scheduling topology for Fam17h systems is broken, because the ThreadId is included in the ApicId when SMT is enabled. So, without further decoding cpu_core_id is unique for each thread rather than the same for threads on the same core. This didn't affect systems with SMT disabled. Make cpu_core_id be what it is defined to be. Signed-off-by:
Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170205105022.8705-2-bp@alien8.deSigned-off-by:
-
Borislav Petkov authored
commit 79a8b9aa upstream. Commit: a33d3317 ("x86/CPU/AMD: Fix Bulldozer topology") restored the initial approach we had with the Fam15h topology of enumerating CU (Compute Unit) threads as cores. And this is still correct - they're beefier than HT threads but still have some shared functionality. Our current approach has a problem with the Mad Max Steam game, for example. Yves Dionne reported a certain "choppiness" while playing on v4.9.5. That problem stems most likely from the fact that the CU threads share resources within one CU and when we schedule to a thread of a different compute unit, this incurs latency due to migrating the working set to a different CU through the caches. When the thread siblings mask mirrors that aspect of the CUs and threads, the scheduler pays attention to it and tries to schedule within one CU first. Which takes care of the latency, of course. Reported-by:
Yves Dionne <yves.dionne@gmail.com> Signed-off-by:
-
Andrey Ryabinin authored
commit 146fbb76 upstream. CONFIG_KASAN=y needs a lot of virtual memory mapped for its shadow. In that case ptdump_walk_pgd_level_core() takes a lot of time to walk across all page tables and doing this without a rescheduling causes soft lockups: NMI watchdog: BUG: soft lockup - CPU#3 stuck for 23s! [swapper/0:1] ... Call Trace: ptdump_walk_pgd_level_core+0x40c/0x550 ptdump_walk_pgd_level_checkwx+0x17/0x20 mark_rodata_ro+0x13b/0x150 kernel_init+0x2f/0x120 ret_from_fork+0x2c/0x40 I guess that this issue might arise even without KASAN on huge machines with several terabytes of RAM. Stick cond_resched() in pgd loop to fix this. Reported-by:
Tobias Regnery <tobias.regnery@gmail.com> Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: kasan-dev@googlegroups.com Cc: Alexander Potapenko <glider@google.com> Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Link: http://lkml.kernel.org/r/20170210095405.31802-1-aryabinin@virtuozzo.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Takashi Iwai authored
commit f3d83317 upstream. This reverts commit f6a0dd10. The commit caused a regression on LINE6 Transport that has no control caps. Although reverting the commit may result back in a spurious error message for some device again, it's the simplest regression fix, hence it's taken as is at first. The further code fix will follow later. Fixes: f6a0dd10 ("ALSA: line6: Only determine control port properties if needed") Reported-by:
Igor Zinovev <zinigor@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 37a7ea4a upstream. snd_seq_pool_done() syncs with closing of all opened threads, but it aborts the wait loop with a timeout, and proceeds to the release resource even if not all threads have been closed. The timeout was 5 seconds, and if you run a crazy stuff, it can exceed easily, and may result in the access of the invalid memory address -- this is what syzkaller detected in a bug report. As a fix, let the code graduate from naiveness, simply remove the loop timeout. BugLink: http://lkml.kernel.org/r/CACT4Y+YdhDV2H5LLzDTJDVF-qiYHUHhtRaW4rbb4gUhTCQB81w@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 4842e98f upstream. When a sequencer queue is created in snd_seq_queue_alloc(),it adds the new queue element to the public list before referencing it. Thus the queue might be deleted before the call of snd_seq_queue_use(), and it results in the use-after-free error, as spotted by syzkaller. The fix is to reference the queue object at the right time. Reported-by:
-
Hui Wang authored
commit af677166 upstream. Without this change, the HDMI/DP codec will be recognised as a generic codec, and there is no sound when playing through this codec. As suggested by NVidia side, after adding the new ID in the driver, the sound playing works well. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 74470954 upstream. rx_refill_timer should be deleted as soon as we disconnect from the backend since otherwise it is possible for the timer to go off before we get to xennet_destroy_queues(). If this happens we may dereference queue->rx.sring which is set to NULL in xennet_disconnect_backend(). Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 9b256714 upstream. The IPIs come in as HVI not EE, so we need to test the appropriate SRR1 bits. The encoding is such that it won't have false positives on P7 and P8 so we can just test it like that. We also need to handle the icp-opal variant of the flush. Fixes: d7436188 ("powerpc/xics: Add ICP OPAL backend") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 90c1e3c2 upstream. Three tiny changes to the ERAT flushing logic: First don't make it depend on DD1. It hasn't been decided yet but we might run DD2 in a mode that also requires explicit flushes for performance reasons so make it unconditional. We also add a missing isync, and finally remove the flush from _tlbiel_va as it is only necessary for congruence-class invalidations (PID, LPID and full TLB), not targetted invalidations. Fixes: 96ed1fe5 ("powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1") Signed-off-by:
-
Jeff Mahoney authored
commit 2a362249 upstream. Commit 4c63c245 incorrectly assumed that returning -ENOIOCTLCMD would cause the native ioctl to be called. The ->compat_ioctl callback is expected to handle all ioctls, not just compat variants. As a result, when using 32-bit userspace on 64-bit kernels, everything except those three ioctls would return -ENOTTY. Fixes: 4c63c245 ("btrfs: bugfix: handle FS_IOC32_{GETFLAGS,SETFLAGS,GETVERSION} in btrfs_ioctl") Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Mauricio Faria de Oliveira authored
commit 2780f3c8 upstream. Avoid that issuing a LIP as follows: find /sys -name 'issue_lip'|while read f; do echo 1 > $f; done triggers the following: BUG: unable to handle kernel NULL pointer dereference at (null) Call Trace: qla2x00_abort_all_cmds+0xed/0x140 [qla2xxx] qla2x00_abort_isp_cleanup+0x1e3/0x280 [qla2xxx] qla2x00_abort_isp+0xef/0x690 [qla2xxx] qla2x00_do_dpc+0x36c/0x880 [qla2xxx] kthread+0x10c/0x140 [mkp: consolidated Mauricio's and Bart's fixes] Signed-off-by:
Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Fixes: 1535aa75 ("qla2xxx: fix invalid DMA access after command aborts in PCI device remove") Cc: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
ojab authored
commit ffdadd68 upstream. MPI2 controllers sometimes got lost (i.e. disappear from /sys/bus/pci/devices) if ASMP is enabled. Signed-off-by:
Slava Kardakov <ojab@ojab.ru> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60644Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by:
-
Dave Carroll authored
commit 8af8e1c2 upstream. commit 78cbccd3 ("aacraid: Fix for KDUMP driver hang") caused a problem on older controllers which do not support MSI-x (namely ASR3405,ASR3805). This patch conditionalizes the previous patch to controllers which support MSI-x Fixes: 78cbccd3 ("aacraid: Fix for KDUMP driver hang") Reported-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Steffen Maier authored
commit 2dfa6688 upstream. Dan Carpenter kindly reported: <quote> The patch d27a7cb9: "zfcp: trace on request for open and close of WKA port" from Aug 10, 2016, leads to the following static checker warning: drivers/s390/scsi/zfcp_fsf.c:1615 zfcp_fsf_open_wka_port() warn: 'req' was already freed. drivers/s390/scsi/zfcp_fsf.c 1609 zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT); 1610 retval = zfcp_fsf_req_send(req); 1611 if (retval) 1612 zfcp_fsf_req_free(req); ^^^ Freed. 1613 out: 1614 spin_unlock_irq(&qdio->req_q_lock); 1615 if (req && !IS_ERR(req)) 1616 zfcp_dbf_rec_run_wka("fsowp_1", wka_port, req->req_id); ^^^^^^^^^^^ Use after free. 1617 return retval; 1618 } Same thing for zfcp_fsf_close_wka_port() as well. </quote> Rather than relying on req being NULL (or ERR_PTR) for all cases where we don't want to trace or should not trace, simply check retval which is unconditionally initialized with -EIO != 0 and it can only become 0 on successful retval = zfcp_fsf_req_send(req). With that we can also remove the then again unnecessary unconditional initialization of req which was introduced with that earlier commit. Reported-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Fixes: d27a7cb9 ("zfcp: trace on request for open and close of WKA port") Reviewed-by:
Jens Remus <jremus@linux.vnet.ibm.com> Signed-off-by:
-
Dexuan Cui authored
commit 433e19cf upstream. Commit a389fcfd ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") added the proper mb(), but removed the test "prev_write_sz < pending_sz" when making the signal decision. As a result, the guest can signal the host unnecessarily, and then the host can throttle the guest because the host thinks the guest is buggy or malicious; finally the user running stress test can perceive intermittent freeze of the guest. This patch brings back the test, and properly handles the in-place consumption APIs used by NetVSC (see get_next_pkt_raw(), put_pkt_raw() and commit_rd_index()). Fixes: a389fcfd ("Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reported-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Tested-by:
K. Y. Srinivasan <kys@microsoft.com> Cc: Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 3372592a upstream. Signal the host when we determine the host is to be signaled - on th read path. The currrent code determines the need to signal in the ringbuffer code and actually issues the signal elsewhere. This can result in the host viewing this interrupt as spurious since the host may also poll the channel. Make the necessary adjustments. Signed-off-by:
-
K. Y. Srinivasan authored
commit 1f6ee4e7 upstream. Signal the host when we determine the host is to be signaled. The currrent code determines the need to signal in the ringbuffer code and actually issues the signal elsewhere. This can result in the host viewing this interrupt as spurious since the host may also poll the channel. Make the necessary adjustments. Signed-off-by:
-
K. Y. Srinivasan authored
commit 74198eb4 upstream. One of the factors that can result in the host concluding that a given guest in mounting a DOS attack is if the guest generates interrupts to the host when the host is not expecting it. If these "spurious" interrupts reach a certain rate, the host can throttle the guest to minimize the impact. The host computation of the "expected number of interrupts" is strictly based on the ring transitions. Until the host logic is fixed, base the guest logic to interrupt solely on the ring state. Signed-off-by:
-
Gal Pressman authored
commit 1d3398fa upstream. We don't need to modify our TIRs unless the user requested a change in the hash function/key, for example when changing indirection only. Tested: # Modify TIRs hash is needed ethtool -X ethX hkey <new key> ethtool -X ethX hfunc <new func> # Modify TIRs hash is not needed ethtool -X ethX equal <new indirection table> All cases are verified with TCP Multi-Stream traffic over IPv4 & IPv6. Fixes: bdfc028d ("net/mlx5e: Fix ethtool RX hash func configuration change") Signed-off-by:
-
Thorsten Horstmann authored
commit da7061c8 upstream. The function ieee80211_ie_split_vendor doesn't return 0 on errors. Instead it returns any offset < ielen when WLAN_EID_VENDOR_SPECIFIC is found. The return value in mesh_add_vendor_ies must therefore be checked against ifmsh->ie_len and not 0. Otherwise all ifmsh->ie starting with WLAN_EID_VENDOR_SPECIFIC will be rejected. Fixes: 082ebb0c ("mac80211: fix mesh beacon format") Signed-off-by:
Thorsten Horstmann <thorsten@defutech.de> Signed-off-by:
Mathias Kretschmer <mathias.kretschmer@fit.fraunhofer.de> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> [sven@narfation.org: Add commit message] Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Masashi Honma authored
commit fd551bac upstream. A previous change to fix checks for NL80211_MESHCONF_HT_OPMODE missed setting the flag when replacing FILL_IN_MESH_PARAM_IF_SET with checking codes. This results in dropping the received HT operation value when called by nl80211_update_mesh_config(). Fix this by setting the flag properly. Fixes: 9757235f ("nl80211: correct checks for NL80211_MESHCONF_HT_OPMODE value") Signed-off-by:
Masashi Honma <masashi.honma@gmail.com> [rewrite commit message to use Fixes: line] Signed-off-by:
-
Michał Winiarski authored
commit 6e7eb178 upstream. We're using non-canonical addresses in drm_mm, and we're making sure that userspace is using canonical addressing - both in case of softpin (verifying incoming offset) and when relocating (converting to canonical when updating offset returned to userspace). Unfortunately when considering the need for relocations, we're comparing offset from userspace (in canonical form) with drm_mm node (in non-canonical form), and as a result, we end up always relocating if our offsets are in the "problematic" range. Let's always convert the offsets to avoid the performance impact of relocations. Fixes: a5f0edf6 ("drm/i915: Avoid writing relocs with addresses in non-canonical form") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Reported-by:
Michał Pyrzowski <michal.pyrzowski@intel.com> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170207195559.18798-1-michal.winiarski@intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Alexander Sverdlin authored
commit 97a98ae5 upstream. Asynchronous external abort is coded differently in DFSR with LPAE enabled. Fixes: 9254970c "ARM: 8447/1: catch pending imprecise abort on unmask". Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Sébastien Szymanski authored
commit 7f59b319 upstream. GPIO4_11 is on pin 152(MX6DL_PAD_KEY_ROW2) and not on pin 151(MX6DL_PAD_KEY_ROW1). I found the error while booting a mainline kernel on APF6S SoM and noticed the following message: [ 2.609337] imx6dl-pinctrl 20e0000.iomuxc: pin MX6DL_PAD_KEY_ROW1 already requested by 20a8000.gpio:105; cannot claim for 20a8000.gpio:107 [ 2.621884] imx6dl-pinctrl 20e0000.iomuxc: pin-151 (20a8000.gpio:107) status -22 [ 2.629303] spi_imx 2008000.ecspi: Can't get CS GPIO 107 With this patch, the message is gone and spi_imx driver probes correctly. Fixes: bb728d66 ("ARM: dts: add gpio-ranges property to iMX GPIO controllers") Signed-off-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 9b2792c3 upstream. This patch addresses a long standing bug where the commit phase of COMPARE_AND_WRITE would result in a se_cmd->cmd_kref reference leak if se_cmd->scsi_status returned non SAM_STAT_GOOD. This would manifest first as a lost SCSI response, and eventual hung task during fabric driver logout or re-login, as existing shutdown logic waited for the COMPARE_AND_WRITE se_cmd->cmd_kref to reach zero. To address this bug, compare_and_write_post() has been changed to drop the incorrect !cmd->scsi_status conditional that was preventing *post_ret = 1 for being set during non SAM_STAT_GOOD status. This patch has been tested with SAM_STAT_CHECK_CONDITION status from normal target_complete_cmd() callback path, as well as the incoming __target_execute_cmd() submission failure path when se_cmd->execute_cmd() returns non zero status. Reported-by:
Donald White <dew@datera.io> Cc: Donald White <dew@datera.io> Tested-by:
Gary Guo <ghg@datera.io> Cc: Gary Guo <ghg@datera.io> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 01d4d673 upstream. This patch addresses a long-standing bug with multi-session (eg: iscsi-target + iser-target) se_node_acl dynamic free withini transport_deregister_session(). This bug is caused when a storage endpoint is configured with demo-mode (generate_node_acls = 1 + cache_dynamic_acls = 1) initiators, and initiator login creates a new dynamic node acl and attaches two sessions to it. After that, demo-mode for the storage instance is disabled via configfs (generate_node_acls = 0 + cache_dynamic_acls = 0) and the existing dynamic acl is never converted to an explicit ACL. The end result is dynamic acl resources are released twice when the sessions are shutdown in transport_deregister_session(). If the storage instance is not changed to disable demo-mode, or the dynamic acl is converted to an explict ACL, or there is only a single session associated with the dynamic ACL, the bug is not triggered. To address this big, move the release of dynamic se_node_acl memory into target_complete_nacl() so it's only freed once when se_node_acl->acl_kref reaches zero. (Drop unnecessary list_del_init usage - HCH) Reported-by:
Rob Millner <rlm@daterainc.com> Tested-by:
-
Nicholas Bellinger authored
commit c54eeffb upstream. This patch fixes a bug where incoming task management requests can be explicitly aborted during an active LUN_RESET, but who's struct work_struct are canceled in-flight before execution. This occurs when core_tmr_drain_tmr_list() invokes cancel_work_sync() for the incoming se_tmr_req->task_cmd->work, resulting in cmd->work for target_tmr_work() never getting invoked and the aborted TMR waiting indefinately within transport_wait_for_tasks(). To address this case, perform a CMD_T_ABORTED check early in transport_generic_handle_tmr(), and invoke the normal path via transport_cmd_check_stop_to_fabric() to complete any TMR kthreads blocked waiting for CMD_T_STOP in transport_wait_for_tasks(). Also, move the TRANSPORT_ISTATE_PROCESSING assignment earlier into transport_generic_handle_tmr() so the existing check in core_tmr_drain_tmr_list() avoids attempting abort the incoming se_tmr_req->task_cmd->work if it has already been queued into se_device->tmr_wq. Reported-by:
-
Nicholas Bellinger authored
commit 0583c261 upstream. This patch adds the missing target_complete_cmd() SCSI status parameter change in target_xcopy_do_work(), that was originally missing in commit 926317de. It correctly propigates up the correct SCSI status during EXTENDED_COPY exception cases, instead of always using the hardcoded SAM_STAT_CHECK_CONDITION from original code. This is required for ESX host environments that expect to hit SAM_STAT_RESERVATION_CONFLICT for certain scenarios, and SAM_STAT_CHECK_CONDITION results in non-retriable status for these cases. Reported-by:
Nixon Vincent <nixon.vincent@calsoftinc.com> Tested-by:
-
Nicholas Bellinger authored
commit 391e2a6d upstream. After the v4.2+ RCU conversion to se_node_acl->lun_entry_hlist, a BUG_ON() was added in core_enable_device_list_for_node() to detect when the located orig->se_lun_acl contains an existing se_lun_acl pointer reference. However, this scenario can happen when a dynamically generated NodeACL is being converted to an explicit NodeACL, when the explicit NodeACL contains a different LUN mapping than the default provided by the WWN endpoint. So instead of triggering BUG_ON(), go ahead and fail instead following the original pre RCU conversion logic. Reported-by:
Benjamin ESTRABAUD <ben.estrabaud@mpstor.com> Cc: Benjamin ESTRABAUD <ben.estrabaud@mpstor.com> Reviewed-by:
-
Maarten Lankhorst authored
commit 92c715fc upstream. drm_atomic_helper_page_flip and drm_atomic_ioctl set their own events in crtc_state->event. But when it's set the event is freed in 2 places. Solve this by only freeing the event in the atomic ioctl when it allocated its own event. This has been broken twice. The first time when the code was introduced, but only in the corner case when an event is allocated, but more crtc's were included by atomic check and then failing. This can mostly happen when you do an atomic modeset in i915 and the display clock is changed, which forces all crtc's to be included to the state. This has been broken worse by adding in-fences support, which caused the double free to be done unconditionally. [IGT] kms_rotation_crc: starting subtest primary-rotation-180 ============================================================================= BUG kmalloc-128 (Tainted: G U ): Object already free ----------------------------------------------------------------------------- Disabling lock debugging due to kernel taint INFO: Allocated in drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] age=0 cpu=3 pid=1529 ___slab_alloc+0x308/0x3b0 __slab_alloc+0xd/0x20 kmem_cache_alloc_trace+0x92/0x1c0 drm_atomic_helper_setup_commit+0x285/0x2f0 [drm_kms_helper] intel_atomic_commit+0x35/0x4f0 [i915] drm_atomic_commit+0x46/0x50 [drm] drm_mode_atomic_ioctl+0x7d4/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Freed in drm_event_cancel_free+0xa3/0xb0 [drm] age=0 cpu=3 pid=1529 __slab_free+0x48/0x2e0 kfree+0x159/0x1a0 drm_event_cancel_free+0xa3/0xb0 [drm] drm_mode_atomic_ioctl+0x86d/0xab0 [drm] drm_ioctl+0x2b3/0x490 [drm] do_vfs_ioctl+0x69c/0x700 SyS_ioctl+0x4e/0x80 entry_SYSCALL_64_fastpath+0x13/0x94 INFO: Slab 0xffffde1f0997b080 objects=17 used=2 fp=0xffff92fb65ec2578 flags=0x200000000008101 INFO: Object 0xffff92fb65ec2578 @offset=1400 fp=0xffff92fb65ec2ae8 Redzone ffff92fb65ec2570: bb bb bb bb bb bb bb bb ........ Object ffff92fb65ec2578: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2588: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec2598: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk Object ffff92fb65ec25e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 kkkkkkkkkkkkkkk. Redzone ffff92fb65ec25f8: bb bb bb bb bb bb bb bb ........ Padding ffff92fb65ec2738: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 3 PID: 180 Comm: kworker/3:2 Tainted: G BU 4.10.0-rc6-patser+ #5039 Hardware name: /NUC5PPYB, BIOS PYBSWCEL.86A.0031.2015.0601.1712 06/01/2015 Workqueue: events intel_atomic_helper_free_state [i915] Call Trace: dump_stack+0x4d/0x6d print_trailer+0x20c/0x220 free_debug_processing+0x1c6/0x330 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] __slab_free+0x48/0x2e0 ? drm_atomic_state_default_clear+0xf7/0x1c0 [drm] kfree+0x159/0x1a0 drm_atomic_state_default_clear+0xf7/0x1c0 [drm] ? drm_atomic_state_clear+0x30/0x30 [drm] intel_atomic_state_clear+0xd/0x20 [i915] drm_atomic_state_clear+0x1a/0x30 [drm] __drm_atomic_state_free+0x13/0x60 [drm] intel_atomic_helper_free_state+0x5d/0x70 [i915] process_one_work+0x260/0x4a0 worker_thread+0x2d1/0x4f0 kthread+0x127/0x130 ? process_one_work+0x4a0/0x4a0 ? kthread_stop+0x120/0x120 ret_from_fork+0x29/0x40 FIX kmalloc-128: Object at 0xffff92fb65ec2578 not freed Fixes: 3b24f7d6 ("drm/atomic: Add struct drm_crtc_commit to track async updates") Fixes: 96260142 ("drm/fence: add in-fences support") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by:
-
