- 23 Jun, 2024 1 commit
-
-
Danila Tikhonov authored
Document the DPU hardware found on the Qualcomm SM7150 platform. Signed-off-by:
Danila Tikhonov <danila@jiaxyga.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/599127/ Link: https://lore.kernel.org/r/20240614215855.82093-2-danila@jiaxyga.comSigned-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
-
- 22 Jun, 2024 8 commits
-
-
Jonathan Marek authored
Make it clear why the pkt_per_line value is being "divided by 2". Signed-off-by:
Jonathan Marek <jonathan@marek.ca> Reviewed-by:
Jun Nie <jun.nie@linaro.org> Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK Reviewed-by:
Jessica Zhang <quic_jesszhan@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/596236/ Link: https://lore.kernel.org/r/20240530-msm-drm-dsc-dsi-video-upstream-4-v6-6-2ab1d334c657@linaro.orgSigned-off-by:
-
Jonathan Marek authored
Video mode DSC won't work if this field is not set correctly. Set it to fix video mode DSC (for slice_per_pkt==1 cases at least). Fixes: 08802f51 ("drm/msm/dsi: Add support for DSC configuration") Signed-off-by:
-
Jonathan Marek authored
The value returned by msm_dsi_wide_bus_enabled() doesn't match what the driver is doing in video mode. Fix that by actually enabling widebus for video mode. Fixes: efcbd6f9 ("drm/msm/dsi: Enable widebus for DSI") Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by:
-
Jun Nie authored
Enable compression bit in cfg2 register for DSC in the DSI case per hardware version. Signed-off-by:
-
Jun Nie authored
data is valid for only half the active window if widebus is enabled Signed-off-by:
-
Jonathan Marek authored
Add width change in DPU timing for DSC compression case to work with DSI video mode. Signed-off-by:
-
Konrad Dybcio authored
These are dummy wrappers that do literally nothing interesting. Remove them. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by:
-
Konrad Dybcio authored
These are dummy wrappers that do literally nothing interesting. Remove them. Signed-off-by:
-
- 21 Jun, 2024 7 commits
-
-
Connor Abbott authored
This isn't known to fix anything yet, but it's a good idea to add it. Signed-off-by:
Connor Abbott <cwabbott0@gmail.com> Reviewed-by:
Rob Clark <robdclark@chromium.org>
-
Connor Abbott authored
Expose the value of the software fuse to userspace. Reviewed-by:
-
Connor Abbott authored
On all Qualcomm platforms with a7xx GPUs, qcom_scm provides a method to initialize cx_mem. Copy this from downstream (minus BCL which we currently don't support). On a750, this includes a new "fuse" register which can be used by qcom_scm to fuse off certain features like raytracing in software. The fuse is default off, and is initialized by calling the method. Afterwards we have to read it to find out which features were enabled. Reviewed-by:
-
Connor Abbott authored
This will used by drm/msm to initialize GPU registers that Qualcomm's firmware doesn't make writeable to the kernel. Reviewed-by:
Bjorn Andersson <andersson@kernel.org> Patchwork: https://patchwork.freedesktop.org/patch/592039/Signed-off-by:
-
Rob Clark authored
This should allow disabling the zap node via an overlay, for slbounce. Suggested-by:
Nikita Travkin <nikita@trvn.ru> Signed-off-by:
Bjorn Andersson <quic_bjorande@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/594572/
-
Rob Clark authored
When debugging faults, it is useful to know how the BO is mapped (cached vs WC, gpu readonly, etc). Signed-off-by:
Akhil P Oommen <quic_akhilpo@quicinc.com> Acked-by:
-
Rob Clark authored
Perfetto can use these traces to track global and per-process GPU memory usage. Signed-off-by:
-
- 20 Jun, 2024 7 commits
-
-
Konrad Dybcio authored
UBWC_MODE is a one-bit-wide field, so a value of 2 is obviously bogus. Replace it with the correct value (0). Fixes: 18397519 ("drm/msm/adreno: Add A702 support") Reported-by:
-
Abhinav Kumar authored
GCC diagnostic pragma method throws below warnings in some of the versions drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:16:9: warning: unknown option after '#pragma GCC diagnostic' kind [-Wpragmas] #pragma GCC diagnostic ignored "-Wunused-const-variable" ^ In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:18:0: drivers/gpu/drm/msm/adreno/adreno_gen7_0_0_snapshot.h:924:19: warning: 'gen7_0_0_external_core_regs' defined but not used [-Wunused-variable] static const u32 *gen7_0_0_external_core_regs[] = { ^ In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:19:0: drivers/gpu/drm/msm/adreno/adreno_gen7_2_0_snapshot.h:748:19: warning: 'gen7_2_0_external_core_regs' defined but not used [-Wunused-variable] static const u32 *gen7_2_0_external_core_regs[] = { ^ In file included from drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:20:0: drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1188:43: warning: 'gen7_9_0_sptp_clusters' defined but not used [-Wunused-variable] static struct gen7_sptp_cluster_registers gen7_9_0_sptp_clusters[] = { ^ drivers/gpu/drm/msm/adreno/adreno_gen7_9_0_snapshot.h:1438:19: warning: 'gen7_9_0_external_core_regs' defined but not used [-Wunused-variable] static const u32 *gen7_9_0_external_core_regs[] = { Remove GCC version dependency by using __unused__ for the unused gen7_* includes. Changes in v2: - Fix the warnings in the commit text - Use __attribute((__unused__)) instead of local assignment changes in v3: - drop the Link from the auto add changes in v4: - replace __attribute((__unused__)) with __always_unused Fixes: 64d62556 ("drm/msm: More fully implement devcoredump for a7xx") Suggested-by:Abhinav Kumar <quic_abhinavk@quicinc.com> Reviewed-by:
-
Rob Clark authored
Move the CP_PROTECT settings into the hw catalog. Signed-off-by:
-
Rob Clark authored
Introduce a6xx_info where we can stash gen specific stuff without polluting the toplevel adreno_info struct. Signed-off-by:
-
Rob Clark authored
Move the hwcg tables into the hw catalog. Signed-off-by:
-
Rob Clark authored
Split each gen's gpu table into it's own file. Only code-motion, no functional change. Signed-off-by:
-
Rob Clark authored
Split into a separate table per generation, in preparation to move each gen's device table to it's own file. Signed-off-by:
-
- 12 Jun, 2024 4 commits
-
-
Dmitry Baryshkov authored
Merge drm-misc-next tree into the msm-next tree in order to be able to use HDMI connector framework for the MSM HDMI driver.
-
Dmitry Baryshkov authored
In order to let bridge chains implement HDMI connector infrastructure, add necessary glue code to the drm_bridge_connector. In case there is a bridge that sets DRM_BRIDGE_OP_HDMI, drm_bridge_connector will register itself as a HDMI connector and provide proxy drm_connector_hdmi_funcs implementation. Note, to simplify implementation, there can be only one bridge in a chain that sets DRM_BRIDGE_OP_HDMI. Setting more than one is considered an error. This limitation can be lifted later, if the need arises. Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240607-bridge-hdmi-connector-v5-3-ab384e6021af@linaro.orgSigned-off-by:
-
Dmitry Baryshkov authored
Turn drm_bridge_connector to using drmm_kzalloc() and drmm_connector_init() and drop the custom destroy function. The drm_connector_unregister() and fwnode_handle_put() are already handled by the drm_connector_cleanup() and so are safe to be dropped. Acked-by:
-
Dmitry Baryshkov authored
Add drm_atomic_helper_connector_hdmi_disable_audio_infoframe(), an API to allow the driver disable sending the Audio Infoframe. This is to be used by the drivers if setup of the infoframes is not tightly coupled with the audio functionality and just disabling the audio playback doesn't stop the HDMI hardware from sending the Infoframe. Acked-by:
-
- 11 Jun, 2024 13 commits
-
-
Douglas Anderson authored
Now that most panels have been updated not to track/double-check their prepared/enabled state update the TODO with next steps. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20240604172305.v3.23.I104cdece7324b0c365e552a17f9883414ffaea01@changeidSigned-off-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by IMX boards. The IMX driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Robert Chiras <robert.chiras@nxp.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. The conversion of the rm67191 panel driver follows many of the other panel drivers but has a few differences that need to be called out. Like in commit 1e0465eb ("drm/panel: otm8009a: Don't double check prepared/enabled"), this panel also uses the "prepared" flag to prevent the backlight functions from running when the panel is powered off. This is probably not the safest thing to do but the old behavior was preserved. See the discussion in the otm8009a patch. Because of this, I've left the driver tracking "prepared" but removed its tracking of "enabled". NOTE: as part of this, transition the panel's direct calls to its disable/unprepare functions in shutdown to call through DRM panel. Cc: Robert Chiras <robert.chiras@nxp.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Werner Johansson <werner.johansson@sonymobile.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Tegra boards. The Tegra driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Thierry Reding <treding@nvidia.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Thierry Reding <treding@nvidia.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by IMX boards. As far as I can tell, all IMX boards are now correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: imx@lists.linux.dev Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Marco Franchi <marco.franchi@nxp.com> Cc: Fabio Estevam <festevam@denx.de> Cc: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: imx@lists.linux.dev Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. Unfortunately, grepping mainline for this panel's compatible string shows no hits, so we can't be 100% sure if the DRM modeset driver used with this panel has been fixed. If it is found that the DRM modeset driver hasn't been fixed then this patch could be temporarily reverted until it is. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Werner Johansson <werner.johansson@sonymobile.com> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. Cc: Werner Johansson <werner.johansson@sonymobile.com> Acked-by:
-
Douglas Anderson authored
It's the responsibility of a correctly written DRM modeset driver to call drm_atomic_helper_shutdown() at shutdown time and that should be disabling / unpreparing the panel if needed. Panel drivers shouldn't be calling these functions themselves. A recent effort was made to fix as many DRM modeset drivers as possible [1] [2] [3] and most drivers are fixed now. A grep through mainline for compatible strings used by this driver indicates that it is used by Qualcomm boards. The Qualcomm driver appears to be correctly calling drm_atomic_helper_shutdown() so we can remove the calls. [1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org [2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org [3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
Douglas Anderson authored
As talked about in commit d2aacaf0 ("drm/panel: Check for already prepared/enabled in drm_panel"), we want to remove needless code from panel drivers that was storing and double-checking the prepared/enabled state. Even if someone was relying on the double-check before, that double-check is now in the core and not needed in individual drivers. NOTE: as part of this, transition the panel's direct calls to its disable function in shutdown/remove to call through DRM panel. Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Acked-by:
-
