- 16 Jan, 2019 40 commits
-
-
Noah Westervelt authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit ad33429c upstream. Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by:
Noah Westervelt <nwestervelt@outlook.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Patrick Gaskin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 3ed64da3 upstream. Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by:
Patrick Gaskin <patrick@pgaskin.net> Cc: stable@vger.kernel.org Signed-off-by:
-
Christian Hoff authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit d55bda1b upstream. "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by:
Christian Hoff <christian_hoff@gmx.net> Suggested-by:
Sebastian Reichel <sre@kernel.org> Reviewed-by:
-
Cameron Gutman authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit a6754fae upstream. Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a8 ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by:
Cameron Gutman <aicommander@gmail.com> Signed-off-by:
-
Wei Yongjun authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2d88a331 upstream. In case of error, the function gpio_to_desc() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Milo Kim authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit d1aa577f upstream. Workqueue, 'set_brightness_work' is used for scheduling brightness control. This workqueue is canceled when the LED class device is unregistered. Currently, LED subsystem handles like below. cancel_work_sync(&led_cdev->set_brightness_work) led_set_brightness(led_cdev, LED_OFF) However, this could be a problem. Workqueue is going to be canceled but LED device needs to be off. The worst case is null pointer access due to scheduling a workqueue. LED module is loaded. LED driver private data is allocated by using devm_zalloc(). LED module is unloaded. led_classdev_unregister() is called. cancel_work_sync() led_set_brightness(led_cdev, LED_OFF) schedule_work() if LED driver uses brightness_set_blocking() In the meantime, driver private data will be freed. ..scheduling.. brightness_set_blocking() callback is invoked. For the brightness control, LED driver tries to access private data but resource is removed! To avoid this problem, LED subsystem should turn off the brightness first and wait for completion. led_set_brightness(led_cdev, LED_OFF) flush_work(&led_cdev->set_brightness_work) It guarantees that LED driver turns off the brightness prior to resource management. Cc: linux-leds@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Milo Kim <milo.kim@ti.com> Signed-off-by:
-
Markus Hofstaetter authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit f1670336 upstream. Some PWMs are disabled by default or the default pin setting does not match the LED_OFF state (e.g., active-low leds). Hence, the driver may end up reporting 0 brightness, but the leds are actually on using full brightness, because it never enforces its default configuration. So enforce it by calling led_pwm_set() after successfully registering the device. Tested on a Phytec phyFLEX i.MX6Q board based on kernel v3.19.5. Signed-off-by:
Markus Hofstaetter <markus.hofstaetter@ait.ac.at> Tested-by:
-
Laura Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 1cd25cbb upstream. After 2dd45316 ("kgdboc: Fix restrict error"), kgdboc_option_setup is now only used when built in, resulting in a warning when compiled as a module: drivers/tty/serial/kgdboc.c:134:12: warning: 'kgdboc_option_setup' defined but not used [-Wunused-function] static int kgdboc_option_setup(char *opt) ^~~~~~~~~~~~~~~~~~~ Move the function under the appropriate ifdef for builtin only. Fixes: 2dd45316 ("kgdboc: Fix restrict error") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Laura Abbott authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2dd45316 upstream. There's an error when compiled with restrict: drivers/tty/serial/kgdboc.c: In function ‘configure_kgdboc’: drivers/tty/serial/kgdboc.c:137:2: error: ‘strcpy’ source argument is the same as destination [-Werror=restrict] strcpy(config, opt); ^~~~~~~~~~~~~~~~~~~ As the error implies, this is from trying to use config as both source and destination. Drop the call to the function where config is the argument since nothing else happens in the function. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Kees Cook authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 42c335f7 upstream. When copying attributes, the len argument was padded out and the resulting memcpy() would copy beyond the end of the source buffer. Avoid this, and use size_t for val_len to avoid all the casts. Similarly, avoid source buffer casts and use void *. Additionally enforces val_len can be represented by u16 and that the DMA buffer was not overflowed. Fixes the size of mfa, which is not FC_FDMI_PORT_ATTR_MAXFRAMESIZE_LEN (but it will be padded up to 4). This was noticed by the future CONFIG_FORTIFY_SOURCE checks. Cc: Daniel Micay <danielmicay@gmail.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Acked-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit d6b340d7 upstream. The meddlesome gcc warns about the possible shortname string in trident driver code: sound/pci/trident/trident.c: In function ‘snd_trident_probe’: sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict] strcat(card->shortname, card->driver); It happens since gcc calculates the possible string size from card->driver, but this can't be true since we did set the string just before that, and they are much shorter. For shutting it up, use the exactly same string set to card->driver for strcat() to card->shortname, too. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Martin Wilck authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 81df022b upstream. Cleanly fill memory for "vendor" and "model" with 0-bytes for the "compatible" case rather than adding only a single 0 byte. This simplifies the devinfo code a a bit, and avoids mistakes in other places of the code (not in current upstream, but we had one such mistake in the SUSE kernel). [mkp: applied by hand and added braces] Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by:
-
Sam Bobroff authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit dc25ab06 upstream. If the platform has no IO space, ioregs is placed next to the already allocated regs. In this case, it should not be separately freed. This prevents a kernel warning from __vunmap "Trying to vfree() nonexistent vm area" when unloading the driver. Fixes: 0dd68309 ("drm/ast: Try to use MMIO registers when PIO isn't supported") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dmitry V. Levin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit c50cbd85 upstream. When checking for TIF_32BIT_REGS flag, mips_get_syscall_arg() should use the task specified as its argument instead of the current task. This potentially affects all syscall_get_arguments() users who specify tasks different from the current. Fixes: c0ff3c53 ("MIPS: Enable HAVE_ARCH_TRACEHOOK.") Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/21185/ Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v3.13+ Signed-off-by:
-
Mathias Kresin authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 7d35baa4 upstream. In case the nd_sd group is set to the sd-card function, Pins 45 + 46 are configured as GPIOs. If they are blocked by the sd function, they can't be used as GPIOs. Reported-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
Mathias Kresin <dev@kresin.me> Signed-off-by:
-
Andrea Parri authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 09d3f015 upstream. Commit: 142b18dd ("uprobes: Fix handle_swbp() vs unregister() + register() race") added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only. However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe(). Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations. Signed-off-by:
Andrea Parri <andrea.parri@amarulasolutions.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@kernel.org Fixes: 142b18dd ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolutions.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Sagi Grimberg authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 24c3456c upstream. If for some reason we failed to query the mr status, we need to make sure to provide sufficient information for an ambiguous error (guard error on sector 0). Fixes: 0a7a08ad ("IB/iser: Implement check_protection") Cc: <stable@vger.kernel.org> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 2cf2f0d5 upstream. gcc discovered that the memcpy() arguments in kdbnearsym() overlap, so we should really use memmove(), which is defined to handle that correctly: In function 'memcpy', inlined from 'kdbnearsym' at /git/arm-soc/kernel/debug/kdb/kdb_support.c:132:4: /git/arm-soc/include/linux/string.h:353:9: error: '__builtin_memcpy' accessing 792 bytes at offsets 0 and 8 overlaps 784 bytes at offset 8 [-Werror=restrict] return __builtin_memcpy(p, q, size); Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 58930cce upstream. As gcc-8 points out, the bit mask check makes no sense here: drivers/staging/rts5208/sd.c: In function 'ext_sd_send_cmd_get_rsp': drivers/staging/rts5208/sd.c:4130:25: error: bitwise comparison always evaluates to true [-Werror=tautological-compare] However, the code is even more bogus, as we have already checked for the SD_RSP_TYPE_R0 case earlier in the function and returned success. As seen in the mmc/sd driver core, SD_RSP_TYPE_R0 means "no response" anyway, so checking for a particular response would not help either. This just removes the nonsensical code to get rid of the warning. Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 8c5a50e8 upstream. The bfa driver has a number of real issues with string termination that gcc-8 now points out: drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_iocmd_port_get_attr': drivers/scsi/bfa/bfad_bsg.c:320:9: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init': drivers/scsi/bfa/bfa_fcs.c:775:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:781:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:788:9: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:801:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:808:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init': drivers/scsi/bfa/bfa_fcs.c:837:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:844:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c:852:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_psymb_init': drivers/scsi/bfa/bfa_fcs.c:778:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:784:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:803:3: error: 'strncat' output may be truncated copying 44 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:811:3: error: 'strncat' output may be truncated copying 16 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c: In function 'bfa_fcs_fabric_nsymb_init': drivers/scsi/bfa/bfa_fcs.c:840:2: error: 'strncat' output may be truncated copying 10 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs.c:847:2: error: 'strncat' output may be truncated copying 30 bytes from a string of length 63 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_hbaattr': drivers/scsi/bfa/bfa_fcs_lport.c:2657:10: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs_lport.c:2659:11: error: argument to 'sizeof' in 'strncat' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ms_gmal_response': drivers/scsi/bfa/bfa_fcs_lport.c:3232:5: error: 'strncpy' output may be truncated copying 16 bytes from a string of length 247 [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_send_rspn_id': drivers/scsi/bfa/bfa_fcs_lport.c:4670:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c:4682:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_lport_ns_util_send_rspn_id': drivers/scsi/bfa/bfa_fcs_lport.c:5206:3: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c:5215:3: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcs_lport.c: In function 'bfa_fcs_fdmi_get_portattr': drivers/scsi/bfa/bfa_fcs_lport.c:2751:2: error: 'strncpy' specified bound 128 equals destination size [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rspnid_build': drivers/scsi/bfa/bfa_fcbuild.c:1254:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] drivers/scsi/bfa/bfa_fcbuild.c:1253:25: note: length computed here drivers/scsi/bfa/bfa_fcbuild.c: In function 'fc_rsnn_nn_build': drivers/scsi/bfa/bfa_fcbuild.c:1275:2: error: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] In most cases, this can be addressed by correctly calling strlcpy and strlcat instead of strncpy/strncat, with the size of the destination buffer as the last argument. For consistency, I'm changing the other callers of strncpy() in this driver the same way. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Acked-by:
Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 67a3b63a upstream. gcc-8 points out a condition that almost certainly doesn't do what the author had in mind: drivers/gpu/drm/gma500/mdfld_intel_display.c: In function 'mdfldWaitForPipeEnable': drivers/gpu/drm/gma500/mdfld_intel_display.c:102:37: error: bitwise comparison always evaluates to false [-Werror=tautological-compare] This changes it to a simple bit mask operation to check whether the bit is set. Fixes: 026abc33 ("gma500: initial medfield merge") Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170905074741.435324-1-arnd@arndb.deSigned-off-by:
-
Sultan Alsawaf authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 000ade80 upstream. By passing a limit of 2 bytes to strncat, strncat is limited to writing fewer bytes than what it's supposed to append to the name here. Since the bounds are checked on the line above this, just remove the string bounds checks entirely since they're unneeded. Signed-off-by:
Sultan Alsawaf <sultanxda@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 166126c1 upstream. gcc 8.1.0 complains: fs/kernfs/symlink.c:91:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length fs/kernfs/symlink.c: In function 'kernfs_iop_get_link': fs/kernfs/symlink.c:88:14: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Linus Torvalds authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 38c7b224 upstream. New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Guenter Roeck authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 77d2a24b upstream. gcc 8.1.0 complains: lib/kobject.c:128:3: warning: 'strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Wstringop-truncation] lib/kobject.c: In function 'kobject_get_path': lib/kobject.c:125:13: note: length computed here Using strncpy() is indeed less than perfect since the length of data to be copied has already been determined with strlen(). Replace strncpy() with memcpy() to address the warning and optimize the code a little. Signed-off-by:
-
Stephen Rothwell authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 217c3e01 upstream. They are too noisy Signed-off-by:
-
Arnd Bergmann authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 3756f640 upstream. gcc-8 warns about using strncpy() with the source size as the limit: fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess] This is indeed slightly suspicious, as it protects us from source arguments without NUL-termination, but does not guarantee that the destination is terminated. This keeps the strncpy() to ensure we have properly padded target buffer, but ensures that we use the correct length, by passing the actual length of the destination buffer as well as adding a build-time check to ensure it is exactly TASK_COMM_LEN. There are only 23 callsites which I all reviewed to ensure this is currently the case. We could get away with doing only the check or passing the right length, but it doesn't hurt to do both. Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.deSigned-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Xiongfeng Wang authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 321cb030 upstream. gcc-8 reports many -Wpacked-not-aligned warnings. The below are some examples. ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); ./include/linux/ceph/msgr.h:67:1: warning: alignment 1 of 'struct ceph_entity_addr' is less than 8 [-Wpacked-not-aligned] } __attribute__ ((packed)); This patch suppresses this kind of warnings for default setting. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
YueHaibing authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 6484a677 upstream. gcc '-Wunused-but-set-variable' warning: drivers/misc/mic/scif/scif_rma.c: In function 'scif_create_remote_lookup': drivers/misc/mic/scif/scif_rma.c:373:25: warning: variable 'vmalloc_num_pages' set but not used [-Wunused-but-set-variable] 'vmalloc_num_pages' should be used to determine if the address is within the vmalloc range. Fixes: ba612aa8 ("misc: mic: SCIF memory registration and unregistration") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Michael Niewöhner authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit effd14f6 upstream. Cherry G230 Stream 2.0 (G85-231) and 3.0 (G85-232) need this quirk to function correctly. This fixes a but where double pressing numlock locks up the device completely with need to replug the keyboard. Signed-off-by:
Michael Niewöhner <linux@mniewoehner.de> Tested-by:
-
Kai-Heng Feng authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit a84a1bcc upstream. There are two new Realtek card readers require ums-realtek to work correctly. Add the new IDs to support them. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1811077 We want to release the unused reservation we have since it refills the delayed refs reserve, which will make everything go smoother when running the delayed refs if we're short on our reservation. CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Liu Bo <bo.liu@linux.alibaba.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Richard Genoud authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 77e75fda upstream. of_dma_controller_free() was not called on module onloading. This lead to a soft lockup: watchdog: BUG: soft lockup - CPU#0 stuck for 23s! Modules linked in: at_hdmac [last unloaded: at_hdmac] when of_dma_request_slave_channel() tried to call ofdma->of_dma_xlate(). Cc: stable@vger.kernel.org Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Acked-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Richard Genoud authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 98f5f932 upstream. The leak was found when opening/closing a serial port a great number of time, increasing kmalloc-32 in slabinfo. Each time the port was opened, dma_request_slave_channel() was called. Then, in at_dma_xlate(), atslave was allocated with devm_kzalloc() and never freed. (Well, it was free at module unload, but that's not what we want). So, here, kzalloc is more suited for the job since it has to be freed in atc_free_chan_resources(). Cc: stable@vger.kernel.org Fixes: bbe89c8e ("at_hdmac: move to generic DMA binding") Reported-by:
Mario Forner <m.forner@be4energy.com> Suggested-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by:
-
Pan Bian authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit ecebf55d upstream. The function ext2_xattr_set calls brelse(bh) to drop the reference count of bh. After that, bh may be freed. However, following brelse(bh), it reads bh->b_data via macro HDR(bh). This may result in a use-after-free bug. This patch moves brelse(bh) after reading field. CC: stable@vger.kernel.org Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 9a20332a upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of sparc cs4231 driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit e1a7bfe3 upstream. The procedure for adding a user control element has some window opened for race against the concurrent removal of a user element. This was caught by syzkaller, hitting a KASAN use-after-free error. This patch addresses the bug by wrapping the whole procedure to add a user control element with the card->controls_rwsem, instead of only around the increment of card->user_ctl_count. This required a slight code refactoring, too. The function snd_ctl_add() is split to two parts: a core function to add the control element and a part calling it. The former is called from the function for adding a user control element inside the controls_rwsem. One change to be noted is that snd_ctl_notify() for adding a control element gets called inside the controls_rwsem as well while it was called outside the rwsem. But this should be OK, as snd_ctl_notify() takes another (finer) rwlock instead of rwsem, and the call of snd_ctl_notify() inside rwsem is already done in another code path. Reported-by: syzbot+dc09047bce3820621ba2@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 7194eda1 upstream. The function snd_ac97_put_spsa() gets the bit shift value from the associated private_value, but it extracts too much; the current code extracts 8 bit values in bits 8-15, but this is a combination of two nibbles (bits 8-11 and bits 12-15) for left and right shifts. Due to the incorrect bits extraction, the actual shift may go beyond the 32bit value, as spotted recently by UBSAN check: UBSAN: Undefined behaviour in sound/pci/ac97/ac97_codec.c:836:7 shift exponent 68 is too large for 32-bit type 'int' This patch fixes the shift value extraction by masking the properly with 0x0f instead of 0xff. Reported-and-tested-by:
Meelis Roos <mroos@linux.ee> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit 7b691541 upstream. Some spurious calls of snd_free_pages() have been overlooked and remain in the error paths of wss driver code. Since runtime->dma_area is managed by the PCM core helper, we shouldn't release manually. Drop the superfluous calls. Reviewed-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1811077 commit f505754f upstream. We were using the path name received from user space without checking that it is null terminated. While btrfs-progs is well behaved and does proper validation and null termination, someone could call the ioctl and pass a non-null terminated patch, leading to buffer overrun problems in the kernel. The ioctl is protected by CAP_SYS_ADMIN. So just set the last byte of the path to a null character, similar to what we do in other ioctls (add/remove/resize device, snapshot creation, etc). CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
-
