- 16 Nov, 2021 1 commit
-
-
Mauro Carvalho Chehab authored
Fix this clang Werror with W=1: drivers/staging/media/ipu3/ipu3-css-params.c:774:8: error: variable 'pin_scale' set but not used [-Werror,-Wunused-but-set-variable] int pin_scale = 0; ^ Reviewed-by:
Nathan Chancellor <nathan@kernel.org> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
- 15 Nov, 2021 39 commits
-
-
Cai Huoqing authored
The helper function devm_platform_ioremap_resource() needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM. Signed-off-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Maíra Canal authored
Remove legacy PWM interface (pwm_config, pwm_enable, pwm_disable) and replace it for the atomic PWM API. Signed-off-by:
Maíra Canal <maira.canal@usp.br> Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Maíra Canal authored
Remove legacy PWM interface (pwm_config, pwm_enable, pwm_disable) and replace it for the atomic PWM API. Signed-off-by:
-
Uwe Kleine-König authored
A driver with a remove callback that just returns 0 behaves identically to a driver with no remove callback at all. So simplify accordingly. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Christophe JAILLET authored
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Christophe JAILLET authored
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by:
-
Randy Dunlap authored
Fix grammar/wording in the help text for MEDIA_TEST_SUPPORT. Fixes: 4b32216a ("media: split test drivers from platform directory") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Tzung-Bi Shih authored
A clang-analyzer warning was reported. >> drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c:133:18: warning: Value stored to 'pfb' during its initialization is never read [clang-analyzer-deadcode.DeadStores] struct vdec_fb *pfb = &framebuf->frame_buffer; ^~~ ~~~~~~~~~~~~~~~~~~~~~~~ Removes the redundant 'pfb' assignment to fix. Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Dillon Min authored
get compile-test failed report from lkp@intel.com after the driver submitted. "ld.lld: error: undefined symbol: v4l2_fh_init" so, make CONFIG_STM32_DMA2D depends on CONFIG_VIDEO_DEV and CONFIG_VIDEO_V4L2 to fix this compile error. Fixes: bff6e3e2f4c9 ("media: stm32-dma2d: STM32 DMA2D driver") Reported-by:Dillon Min <dillon.minfei@gmail.com> Signed-off-by:
-
Dillon Min authored
remove unused functions to avoid compile errors when W=1. >> drivers/media/platform/stm32/dma2d/dma2d-hw.c:29:20: error: unused function 'reg_set' [-Werror,-Wunused-function] static inline void reg_set(void __iomem *base, u32 reg, u32 mask) >> drivers/media/platform/stm32/dma2d/dma2d-hw.c:34:20: error: unused function 'reg_clear' [-Werror,-Wunused-function] static inline void reg_clear(void __iomem *base, u32 reg, u32 mask) Fixes: bff6e3e2f4c9 ("media: stm32-dma2d: STM32 DMA2D driver") Reported-by: -
Jammy Huang authored
If res-chg, VE_INTERRUPT_MODE_DETECT_WD irq will be raised. But v4l2_input_status won't be updated to no-signal immediately until aspeed_video_get_resolution() in aspeed_video_resolution_work(). During the period of time, aspeed_video_start_frame() could be called because it doesn't know signal becomes unstable now. If it goes with aspeed_video_init_regs() of aspeed_video_irq_res_change() simultaneously, it will mess up hw state. To fix this problem, v4l2_input_status is updated to no-signal immediately for VE_INTERRUPT_MODE_DETECT_WD irq. Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Signed-off-by:
Jammy Huang <jammy_huang@aspeedtech.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Hans Verkuil authored
The Documentation/driver-api/media/drivers/rkisp1.rst file wasn't referenced in the index.rst file, so it was never included. Add it. Signed-off-by:
-
Yunfei Dong authored
Width and height need to 64 bytes aligned when setting the format. Need to make sure all is 64 bytes align when use width and height to calculate buffer size. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Acked-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by:
Steve Cho <stevecho@chromium.org> Signed-off-by:
-
Hans Verkuil authored
If V4L2_CAP_READWRITE is not set, then readbuffers must be set to 0, otherwise v4l2-compliance will complain. A note on the Fixes tag below: this patch does not really fix that commit, but it can be applied from that commit onwards. For older code there is no guarantee that device_caps is set, so even though this patch would apply, it will not work reliably. Signed-off-by:
-
Hans Verkuil authored
Improve the documentation for CEC_RECEIVE/TRANSMIT w.r.t. the sequence and tx/rx_status fields. Also remove a duplicate tx_status description. Signed-off-by:
-
Kwang Son authored
Fix example code which has missing or double backslash typo. Signed-off-by:
Kwang Son <dev.kwang.son@gmail.com> Signed-off-by:
-
Dongliang Mu authored
In the em28xx_init_rev, if em28xx_audio_setup fails, this function fails to deallocate the media_dev allocated in the em28xx_media_device_init. Fix this by adding em28xx_unregister_media_device to free media_dev. BTW, this patch is tested in my local syzkaller instance, and it can prevent the memory leak from occurring again. CC: Pavel Skripkin <paskripkin@gmail.com> Fixes: 37ecc7b1 ("[media] em28xx: add media controller support") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Reported-by:
syzkaller <syzkaller@googlegroups.com> Signed-off-by:
-
Niklas Söderlund authored
Convert ADV748X analog video decoder documentation to json-schema. While converting the bindings extend it to enforce that all port@n nodes shall be encapsulated inside a ports node. This change does not have an effect on drivers parsing the ports@n nodes. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Christophe JAILLET authored
'mfc_dev->mem_bitmap' is a bitmap. So use 'bitmap_zalloc()' to simplify code and improve the semantic. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by:
-
Kieran Bingham authored
The cleanup in tw5864_finidev() neglected to disable the PCI device after enabling it in tw5864_initdev(). Call pci_disable_device() after releasing the associated resources. Signed-off-by:
-
Christophe JAILLET authored
Some resources are allocated with 'pci_request_regions()', so use 'pci_release_regions()' to free them, instead of a verbose 'release_mem_region()'. There is no point in calling 'devm_kfree()'. The corresponding resource is managed, so it will be fried automatically. Signed-off-by:
-
Cai Huoqing authored
Repalce kthread_create/wake_up_process() with kthread_run() to simplify the code. Signed-off-by:
-
Jammy Huang authored
aspeed_video_get_resolution() will try to do res-detect again if the timing got in last try is invalid. But it will always time out because VE_SEQ_CTRL_TRIG_MODE_DET is only cleared after 1st mode-detect. To fix the problem, just clear VE_SEQ_CTRL_TRIG_MODE_DET before setting it in aspeed_video_enable_mode_detect(). Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Xu Wang authored
In ia_css_frame_map, the check of 'err' is unneeded to be done twice. Link: https://lore.kernel.org/linux-media/20211110094910.67951-1-vulab@iscas.ac.cnSigned-off-by:
Xu Wang <vulab@iscas.ac.cn> Signed-off-by:
-
Mauro Carvalho Chehab authored
Simplify the code by getting rid of this function, as it ends being just a single line of code. Link: https://lore.kernel.org/linux-media/80ea920d14379124ba92aab2e6a6d12a92d79b2b.1636544620.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Mauro Carvalho Chehab authored
The open() fops support two types of devices: "acc" and normal ones. the acc works on a different way, using a different pipe struct. Not sure yet if it would make sense to setup a run_mode there. Also, As default_run_mode exists only on normal modes, we can simplify the logic to check if the device is in normal mode. That solves this warning: ../drivers/staging/media/atomisp/pci/atomisp_fops.c:904 atomisp_open() warn: variable dereferenced before check 'asd' (see line 807) Signed-off-by: -
Mauro Carvalho Chehab authored
The asd->isp was referenced before checking if asd is not NULL. This fixes this warning: ../drivers/staging/media/atomisp/pci/atomisp_cmd.c:5548 atomisp_set_fmt_to_snr() warn: variable dereferenced before check 'asd' (see line 5540) While here, avoid getting the pipe pointer twice. Signed-off-by: -
Mauro Carvalho Chehab authored
During atomisp register, udev tries to open all devices. For some, pipe is NULL, at least during register time, causing the driver to try to access a NULL pointer. So, add an extra check to avoid such condition. Link: https://lore.kernel.org/linux-media/6406265f2d5f3791d5c7cbd1364186217f19524c.1636364423.git.mchehab+huawei@kernel.orgSigned-off-by:
-
Dan Carpenter authored
The "power" pointer is not initialized on the else path and that would lead to an Oops. Link: https://lore.kernel.org/linux-media/20211012082150.GA31086@kili Fixes: c30f4cb2 ("media: atomisp: Refactor PMIC detection to a separate function") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
The vts value should be set before being checked, as otherwise a warning will arise: drivers/staging/media/atomisp/i2c/atomisp-ov2680.c: In function 'ov2680_set_fmt': drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:873:33: warning: 'vts' may be used uninitialized [-Wmaybe-uninitialized] 873 | if (dev->exposure > vts - OV2680_INTEGRATION_TIME_MARGIN) Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Fixes: 62b984359b6f ("media: atomisp-ov2680: Fix ov2680_set_fmt() messing up high exposure settings") Signed-off-by:
-
Mauro Carvalho Chehab authored
As the settings are only applied when the device is powered on, it should return 0 when the device is not powered. Not doing that causes a warning: drivers/staging/media/atomisp/i2c/atomisp-ov2680.c: In function 'ov2680_ioctl': drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:390:16: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] 390 | return ov2680_set_exposure(sd, coarse_itg, analog_gain, digital_gain); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/staging/media/atomisp/i2c/atomisp-ov2680.c:359:13: note: 'ret' was declared here 359 | int ret; | ^~~ Reported-by:
-
Hans de Goede authored
For exposure settings > (lines_per_frame - vts_margin) the VTS register needs to be programmed to (exposure + vts_margin) rather then being set to lines_per_frame. The res->regs register array was clobbering this higher setting causing high exposure settings to not work. Fix this by letting ov2680_set_fmt() calculate the vts value, instead of hardcoding it. This is the last in a series of fixes which fixes exposure and gain settings not working, with this everything works, so drop the comment that it does not work. Link: https://lore.kernel.org/linux-media/20211107171549.267583-12-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Now that we restore the default or last user set exposure setting on power_up() there is no need for the registers written by ov2680_set_fmt() to write to the exposure register. Not doing so fixes the exposure always being reset to the value from the res->regs array after a set_fmt(). Link: https://lore.kernel.org/linux-media/20211107171549.267583-11-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
The shift << 16 of the value in the code path for 16 bit values is bogus, put_unaligned_be16() takes the lower 16 bits which will not always be 0. This was causing __ov2680_set_exposure() to always set the OV2680_AGC and OV2680_TIMING_VTS registers to 0. Link: https://lore.kernel.org/linux-media/20211107171549.267583-10-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Switch to ov2680_read_reg() to read all 24 bits in one go; and the exposure value sits in bits 4-19 of the 24 bit exposure register, so we need to shift the read value by 4 to report the correct value. Link: https://lore.kernel.org/linux-media/20211107171549.267583-9-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Some ov2680 registers like exposure are 24 bit, ov2680_read_reg() already mostly supports this, we just need to change the return type from u16 to u32. Link: https://lore.kernel.org/linux-media/20211107171549.267583-8-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Save/restore exposure and gain over sensor power-down and don't write them to the sensor when ov2680_set_exposure() is called while the sensor is off. Link: https://lore.kernel.org/linux-media/20211107171549.267583-7-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Move ov2680_init_registers() call to power_up(), so that we also init the registers on code-paths which do not call ov2680_s_power() like running camorama. Link: https://lore.kernel.org/linux-media/20211107171549.267583-6-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
The ov2680_res and N_RES global variables are just hardcoded as aliases for ov2680_res_preview and N_RES_PREVIEW, remove them. Link: https://lore.kernel.org/linux-media/20211107171549.267583-5-hdegoede@redhat.comSigned-off-by:
-
