- 02 Oct, 2018 13 commits
-
-
Rickard x Andersson authored
During certain heavy network loads TX could time out with TX ring dump. TX is sometimes never restarted after reaching "tx_stop_threshold" because function "fec_enet_tx_queue" only tests the first queue. In addition the TX timeout callback function failed to recover because it also operated only on the first queue. Signed-off-by:
Rickard x Andersson <rickaran@axis.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Some of the chip-specific hw_start functions set bit TXCFG_AUTO_FIFO in register TxConfig. The original patch changed the order of some calls resulting in these changes being overwritten by rtl_set_tx_config_registers() in rtl_hw_start(). This eventually resulted in network stalls especially under high load. Analyzing the chip-specific hw_start functions all chip version from 34, with the exception of version 39, need this bit set. This patch moves setting this bit to rtl_set_tx_config_registers(). Fixes: 4fd48c4a ("r8169: move common initializations to tp->hw_start") Reported-by:
Ortwin Glück <odi@odi.ch> Reported-by:
David Arendt <admin@prnet.org> Root-caused-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Tested-by:
Tony Atkinson <tatkinson@linux.com> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== tun: address two syzbot reports Small changes addressing races discovered by syzbot. First patch is a cleanup. Second patch moves a mutex init sooner. Third patch makes sure each tfile gets its own napi enable flags. ==================== Signed-off-by: -
Eric Dumazet authored
Since tun->flags might be shared by multiple tfile structures, it is better to make sure tun_get_user() is using the flags for the current tfile. Presence of the READ_ONCE() in tun_napi_frags_enabled() gave a hint of what could happen, but we need something stronger to please syzbot. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13647 Comm: syz-executor5 Not tainted 4.19.0-rc5+ #59 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: napi_gro_frags+0x3f4/0xc90 net/core/dev.c:5715 tun_get_user+0x31d5/0x42a0 drivers/net/tun.c:1922 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1967 call_write_iter include/linux/fs.h:1808 [inline] new_sync_write fs/read_write.c:474 [inline] __vfs_write+0x6b8/0x9f0 fs/read_write.c:487 vfs_write+0x1fc/0x560 fs/read_write.c:549 ksys_write+0x101/0x260 fs/read_write.c:598 __do_sys_write fs/read_write.c:610 [inline] __se_sys_write fs/read_write.c:607 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:607 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457579 Code: 1d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fe003614c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457579 RDX: 0000000000000012 RSI: 0000000020000000 RDI: 000000000000000a RBP: 000000000072c040 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe0036156d4 R13: 00000000004c5574 R14: 00000000004d8e98 R15: 00000000ffffffff Modules linked in: RIP: 0010:dev_gro_receive+0x132/0x2720 net/core/dev.c:5427 Code: 48 c1 ea 03 80 3c 02 00 0f 85 6e 20 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 6e 10 49 8d bd d0 00 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 59 20 00 00 4d 8b a5 d0 00 00 00 31 ff 41 81 e4 RSP: 0018:ffff8801c400f410 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff8618d325 RDX: 000000000000001a RSI: ffffffff86189f97 RDI: 00000000000000d0 RBP: ffff8801c400f608 R08: ffff8801c8fb4300 R09: 0000000000000000 R10: ffffed0038801ed7 R11: 0000000000000003 R12: ffff8801d327d358 R13: 0000000000000000 R14: ffff8801c16dd8c0 R15: 0000000000000004 FS: 00007fe003615700(0000) GS:ffff8801dac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f3c43db8 CR3: 00000001bebb2000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
This is the first part to fix following syzbot report : console output: https://syzkaller.appspot.com/x/log.txt?x=145378e6400000 kernel config: https://syzkaller.appspot.com/x/.config?x=443816db871edd66 dashboard link: https://syzkaller.appspot.com/bug?extid=e662df0ac1d753b57e80 Following patch is fixing the race condition, but it seems safer to initialize this mutex at tfile creation anyway. Fixes: 90e33d45 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by:
-
Eric Dumazet authored
tun_napi_disable() and tun_napi_del() do not need a pointer to the tun_struct Signed-off-by:
-
Dave Jones authored
The bonding driver lacks the rcu lock when it calls down into netdev_lower_get_next_private_rcu from bond_poll_controller, which results in a trace like: WARNING: CPU: 2 PID: 179 at net/core/dev.c:6567 netdev_lower_get_next_private_rcu+0x34/0x40 CPU: 2 PID: 179 Comm: kworker/u16:15 Not tainted 4.19.0-rc5-backup+ #1 Workqueue: bond0 bond_mii_monitor RIP: 0010:netdev_lower_get_next_private_rcu+0x34/0x40 Code: 48 89 fb e8 fe 29 63 ff 85 c0 74 1e 48 8b 45 00 48 81 c3 c0 00 00 00 48 8b 00 48 39 d8 74 0f 48 89 45 00 48 8b 40 f8 5b 5d c3 <0f> 0b eb de 31 c0 eb f5 0f 1f 40 00 0f 1f 44 00 00 48 8> RSP: 0018:ffffc9000087fa68 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff880429614560 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 00000000ffffffff RDI: ffffffffa184ada0 RBP: ffffc9000087fa80 R08: 0000000000000001 R09: 0000000000000000 R10: ffffc9000087f9f0 R11: ffff880429798040 R12: ffff8804289d5980 R13: ffffffffa1511f60 R14: 00000000000000c8 R15: 00000000ffffffff FS: 0000000000000000(0000) GS:ffff88042f880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4b78fce180 CR3: 000000018180f006 CR4: 00000000001606e0 Call Trace: bond_poll_controller+0x52/0x170 netpoll_poll_dev+0x79/0x290 netpoll_send_skb_on_dev+0x158/0x2c0 netpoll_send_udp+0x2d5/0x430 write_ext_msg+0x1e0/0x210 console_unlock+0x3c4/0x630 vprintk_emit+0xfa/0x2f0 printk+0x52/0x6e ? __netdev_printk+0x12b/0x220 netdev_info+0x64/0x80 ? bond_3ad_set_carrier+0xe9/0x180 bond_select_active_slave+0x1fc/0x310 bond_mii_monitor+0x709/0x9b0 process_one_work+0x221/0x5e0 worker_thread+0x4f/0x3b0 kthread+0x100/0x140 ? process_one_work+0x5e0/0x5e0 ? kthread_delayed_work_timer_fn+0x90/0x90 ret_from_fork+0x24/0x30 We're also doing rcu dereferences a layer up in netpoll_send_skb_on_dev before we call down into netpoll_poll_dev, so just take the lock there. Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
David Ahern authored
Link dumps can return results from a target namespace. If the namespace id is invalid, then the dump request should fail if get_target_net fails rather than continuing with a dump of the current namespace. Fixes: 79e1ad14 ("rtnetlink: use netnsid to query interface") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Flavio Leitner authored
This reverts commit 90c7afc9. When the commit was merged, the code used nf_ct_put() to free the entry, but later on commit 76644232 ("openvswitch: Free tmpl with tmpl_free.") replaced that with nf_ct_tmpl_free which is a more appropriate. Now the original problem is removed. Then 44d6e2f2 ("net: Replace NF_CT_ASSERT() with WARN_ON().") replaced a debug assert with a WARN_ON() which is trigged now. Signed-off-by:
Flavio Leitner <fbl@redhat.com> Acked-by:
Joe Stringer <joe@ovn.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2018-09-27 Here's one more Bluetooth fix for 4.19, fixing the handling of an attempt to unpair a device while pairing is in progress. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: -
LUU Duc Canh authored
The initial session number when a link is created is based on a random value, taken from struct tipc_net->random. It is then incremented for each link reset to avoid mixing protocol messages from different link sessions. However, when a bearer is reset all its links are deleted, and will later be re-created using the same random value as the first time. This means that if the link never went down between creation and deletion we will still sometimes have two subsequent sessions with the same session number. In virtual environments with potentially long transmission times this has turned out to be a real problem. We now fix this by randomizing the session number each time a link is created. With a session number size of 16 bits this gives a risk of session collision of 1/64k. To reduce this further, we also introduce a sanity check on the very first STATE message arriving at a link. If this has an acknowledge value differing from 0, which is logically impossible, we ignore the message. The final risk for session collision is hence reduced to 1/4G, which should be sufficient. Signed-off-by:
LUU Duc Canh <canh.d.luu@dektech.com.au> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
Dan Carpenter authored
If "td->u.target_size" is larger than sizeof(struct xt_entry_target) we return -EINVAL. But we don't check whether it's smaller than sizeof(struct xt_entry_target) and that could lead to an out of bounds read. Fixes: 7ba699c6 ("[NET_SCHED]: Convert actions from rtnetlink to new netlink API") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2018-10-01 1) Validate address prefix lengths in the xfrm selector, otherwise we may hit undefined behaviour in the address matching functions if the prefix is too big for the given address family. 2) Fix skb leak on local message size errors. From Thadeu Lima de Souza Cascardo. 3) We currently reset the transport header back to the network header after a transport mode transformation is applied. This leads to an incorrect transport header when multiple transport mode transformations are applied. Reset the transport header only after all transformations are already applied to fix this. From Sowmini Varadhan. 4) We only support one offloaded xfrm, so reset crypto_done after the first transformation in xfrm_input(). Otherwise we may call the wrong input method for subsequent transformations. From Sowmini Varadhan. 5) Fix NULL pointer dereference when skb_dst_force clears the dst_entry. skb_dst_force does not really force a dst refcount anymore, it might clear it instead. xfrm code did not expect this, add a check to not dereference skb_dst() if it was cleared by skb_dst_force. 6) Validate xfrm template mode, otherwise we can get a stack-out-of-bounds read in xfrm_state_find. From Sean Tranchetti. Please pull or let me know if there are problems. ==================== Signed-off-by:
-
- 01 Oct, 2018 2 commits
-
-
Eric Dumazet authored
In normal SYN processing, packets are handled without listener lock and in RCU protected ingress path. But syzkaller is known to be able to trick us and SYN packets might be processed in process context, after being queued into socket backlog. In commit 06f877d6 ("tcp/dccp: fix other lockdep splats accessing ireq_opt") I made a very stupid fix, that happened to work mostly because of the regular path being RCU protected. Really the thing protecting ireq->ireq_opt is RCU read lock, and the pseudo request refcnt is not relevant. This patch extends what I did in commit 449809a6 ("tcp/dccp: block BH for SYN processing") by adding an extra rcu_read_{lock|unlock} pair in the paths that might be taken when processing SYN from socket backlog (thus possibly in process context) Fixes: 06f877d6 ("tcp/dccp: fix other lockdep splats accessing ireq_opt") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Skip ip_sabotage_in() for packet making into the VRF driver, otherwise packets are dropped, from David Ahern. 2) Clang compilation warning uncovering typo in the nft_validate_register_store() call from nft_osf, from Stefan Agner. 3) Double sizeof netlink message length calculations in ctnetlink, from zhong jiang. 4) Missing rb_erase() on batch full in rbtree garbage collector, from Taehee Yoo. 5) Calm down compilation warning in nf_hook(), from Florian Westphal. 6) Missing check for non-null sk in xt_socket before validating netns procedence, from Flavio Leitner. ==================== Signed-off-by:
-
- 29 Sep, 2018 14 commits
-
-
Johannes Berg authored
Fix a simple typo: attribuets -> attributes Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Hans de Goede authored
Disable the clk during suspend to save power. Note that tp->clk may be NULL, the clk core functions handle this without problems. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Carlo Caione <carlo@endlessm.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Shahed Shaikh authored
In regular NIC transmission flow, driver always configures MAC using Tx queue zero descriptor as a part of MAC learning flow. But with multi Tx queue supported NIC, regular transmission can occur on any non-zero Tx queue and from that context it uses Tx queue zero descriptor to configure MAC, at the same time TX queue zero could be used by another CPU for regular transmission which could lead to Tx queue zero descriptor corruption and cause FW abort. This patch fixes this in such a way that driver always configures learned MAC address from the same Tx queue which is used for regular transmission. Fixes: 7e2cf4fe ("qlcnic: change driver hardware interface mechanism") Signed-off-by:
Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by:
-
LUU Duc Canh authored
We see the following scenario: 1) Link endpoint B on node 1 discovers that its peer endpoint is gone. Since there is a second working link, failover procedure is started. 2) Link endpoint A on node 1 sends a FAILOVER message to peer endpoint A on node 2. The node item 1->2 goes to state FAILINGOVER. 3) Linke endpoint A/2 receives the failover, and is supposed to take down its parallell link endpoint B/2, while producing a FAILOVER message to send back to A/1. 4) However, B/2 has already been deleted, so no FAILOVER message can created. 5) Node 1->2 remains in state FAILINGOVER forever, refusing to receive any messages that can bring B/1 up again. We are left with a non- redundant link between node 1 and 2. We fix this with letting endpoint A/2 build a dummy FAILOVER message to send to back to A/1, so that the situation can be resolved. Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: usb: Check for Wake-on-LAN modes Most of our USB Ethernet drivers don't seem to be checking properly whether the user is supplying a correct Wake-on-LAN mode to enter, so the experience as an user could be confusing, since it would generally lead to either no wake-up, or the device not being marked for wake-up. Please review! Changes in v2: - fixed lan78xx handling, thanks Woojung! ==================== Signed-off-by: -
Florian Fainelli authored
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: e0e474a8 ("smsc95xx: add wol magic packet support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 6c636503 ("smsc75xx: add wol magic packet support") Signed-off-by:
-
Florian Fainelli authored
The driver does not check for Wake-on-LAN modes specified by an user, but will conditionally set the device as wake-up enabled or not based on that, which could be a very confusing user experience. Fixes: 21ff2e89 ("r8152: support WOL") Signed-off-by:
-
Florian Fainelli authored
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 19a38d8e ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support") Signed-off-by:
-
Florian Fainelli authored
The driver supports a fair amount of Wake-on-LAN modes, but is not checking that the user specified one that is supported. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Woojung Huh <Woojung.Huh@Microchip.com> Signed-off-by:
-
Florian Fainelli authored
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: e2ca90c2 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by:
-
Florian Fainelli authored
The driver currently silently accepts unsupported Wake-on-LAN modes (other than WAKE_PHY or WAKE_MAGIC) without reporting that to the user, which is confusing. Fixes: 2e55cc72 ("[PATCH] USB: usbnet (3/9) module for ASIX Ethernet adapters") Signed-off-by:
-
David S. Miller authored
Merge branch 'ieee802154-for-davem-2018-09-28' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2018-09-28 An update from ieee802154 for your *net* tree. Some cleanup patches throughout the drivers from the Huawei tag team Yue Haibing and Zhong Jiang. Xue is replacing some magic numbers with defines in his mcr20a driver. ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fsDavid S. Miller authored
David Howells says: ==================== rxrpc: Fixes Here are some miscellaneous fixes for AF_RXRPC: (1) Remove a duplicate variable initialisation. (2) Fix one of the checks made when we decide to set up a new incoming service call in which a flag is being checked in the wrong field of the packet header. This check is abstracted out into helper functions. (3) Fix RTT gathering. The code has been trying to make use of socket timestamps, but wasn't actually enabling them. The code has also been recording a transmit time for the outgoing packet for which we're going to measure the RTT after sending the message - but we can get the incoming packet before we get to that and record a negative RTT. (4) Fix the emission of BUSY packets (we are emitting ABORTs instead). (5) Improve error checking on incoming packets. (6) Try to fix a bug in new service call handling whereby a BUG we should never be able to reach somehow got triggered. Do this by moving much of the checking as early as possible and not repeating it later (depends on (5) above). (7) Fix the sockopts set on a UDP6 socket to include the ones set on a UDP4 socket so that we receive UDP4 errors and packet-too-large notifications too. (8) Fix the distribution of errors so that we do it at the point of receiving an error in the UDP callback rather than deferring it thereby cutting short any transmissions that would otherwise occur in the window. ==================== Signed-off-by:
-
- 28 Sep, 2018 11 commits
-
-
David S. Miller authored
Eric Dumazet says: ==================== netpoll: second round of fixes. As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture, showing one ksoftirqd eating all cycles can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. It seems that all networking drivers that do use NAPI for their TX completions, should not provide a ndo_poll_controller() : Most NAPI drivers have netpoll support already handled in core networking stack, since netpoll_poll_dev() uses poll_napi(dev) to iterate through registered NAPI contexts for a device. First patch is a fix in poll_one_napi(). Then following patches take care of ten drivers. ==================== Signed-off-by: -
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ibmvnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. ibmvnic_netpoll_controller() was completely wrong anyway, as it was scheduling NAPI to service RX queues (instead of TX), so I doubt netpoll ever worked on this driver. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc-falcon uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
Bert Kenward <bkenward@solarflare.com> Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. sfc uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ena uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. netxen uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. qlcnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. virto_net uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hns uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ehea uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by:
-
Eric Dumazet authored
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hinic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Note that hinic_netpoll() was incorrectly scheduling NAPI on both RX and TX queues. Signed-off-by:
-
