Add Skylake-X and Broadwell-X IDs for out-of-band (OBB) control of
P-States.

For these processors, if MSR_MISC_PWR_MGMT BIT(8) == 1, then the
Intel P-State driver should exit as OS can't control P-States.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw : Subject/changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit 790d849b.

Using a v4.7-rc7 kernel on a HP ProLiant triggered following messages

 pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2800 MHz
 cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor

The last line was shown for each CPU in the system.
Testing v4.5 (where commit 790d849b was integrated) triggered
similar messages. Same behaviour on a 2nd HP Proliant system.

So commit 790d849b (cpufreq: pcc-cpufreq: update default value of
cpuinfo_transition_latency) causes the system to use performance
governor which, I guess, was not the intention of the patch.

Enabling debug output in pcc-cpufreq provides following verbose output:

 pcc-cpufreq: (v1.10.00) driver loaded with frequency limits: 1200 MHz, 2800 MHz
 pcc_get_offset: for CPU 0: pcc_cpu_data input_offset: 0x44, pcc_cpu_data output_offset: 0x48
 init: policy->max is 2800000, policy->min is 1200000
 get: get_freq for CPU 0
 get: SUCCESS: (virtual) output_offset for cpu 0 is 0xffffc9000d7c0048, contains a value of: 0xff06. Speed is: 168000 MHz
 cpufreq: ondemand governor failed, too long transition latency of HW, fallback to performance governor
 target: CPU 0 should go to target freq: 2800000 (virtual) input_offset is 0xffffc9000d7c0044
 target: was SUCCESSFUL for cpu 0

I am asking to revert 790d849b to re-enable usage of ondemand
governor with pcc-cpufreq.

Fixes: 790d849b (cpufreq: pcc-cpufreq: update default value of cpuinfo_transition_latency)
CC: <stable@vger.kernel.org> # 4.5+
Signed-off-by: Andreas Herrmann <aherrmann@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Export cpufreq_driver_resolve_freq() since governors may be compiled as
modules.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The handlers provided by cpufreq core are sufficient for resolving the
frequency for drivers providing ->target_index(), as the core already
has the frequency table and so ->resolve_freq() isn't required for such
platforms.

This patch disallows drivers with ->target_index() callback to use the
->resolve_freq() callback.

Also, it fixes a potential kernel crash for drivers providing ->target()
but no ->resolve_freq().

Fixes: e3c06236 "cpufreq: add cpufreq_driver_resolve_freq()"
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

A call to cpufreq_driver_resolve_freq will cache the mapping from
the desired target frequency to the frequency table index. If there
is a mapping for the desired target frequency then use it instead of
looking up the mapping again.
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The slow-path frequency transition path is relatively expensive as it
requires waking up a thread to do work. Should support be added for
remote CPU cpufreq updates that is also expensive since it requires an
IPI. These activities should be avoided if they are not necessary.

To that end, calculate the actual driver-supported frequency required by
the new utilization value in schedutil by using the recently added
cpufreq_driver_resolve_freq API. If it is the same as the previously
requested driver frequency then there is no need to continue with the
update assuming the cpu frequency limits have not changed. This will
have additional benefits should the semantics of the rate limit be
changed to apply solely to frequency transitions rather than to
frequency calculations in schedutil.

The last raw required frequency is cached. This allows the driver
frequency lookup to be skipped in the event that the new raw required
frequency matches the last one, assuming a frequency update has not been
forced due to limits changing (indicated by a next_freq value of
UINT_MAX, see sugov_should_update_freq).
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Cpufreq governors may need to know what a particular target frequency
maps to in the driver without necessarily wanting to set the frequency.
Support this operation via a new cpufreq API,
cpufreq_driver_resolve_freq(). This API returns the lowest driver
frequency equal or greater than the target frequency
(CPUFREQ_RELATION_L), subject to any policy (min/max) or driver
limitations. The mapping is also cached in the policy so that a
subsequent fast_switch operation can avoid repeating the same lookup.

The API will call a new cpufreq driver callback, resolve_freq(), if it
has been registered by the driver. Otherwise the frequency is resolved
via cpufreq_frequency_table_target(). Rather than require ->target()
style drivers to provide a resolve_freq() callback it is left to the
caller to ensure that the driver implements this callback if necessary
to use cpufreq_driver_resolve_freq().
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The MSR MSR_HWP_INTERRUPT is valid only when CPUID.06H:EAX[8] = 1, so
check for feature before accessing this MSR.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, intel_pstate only updates the cpu_frequency tracepoint
if the new P-state to set is different from the current one, but
that causes powertop to report 100% idle on an 100% loaded system
sometimes.

Prevent that from happening by updating the cpu_frequency tracepoint
every time intel_pstate_update_pstate() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>-

When I was working with the Intel P state driver I came across a
remnant struct element that is no longer needed after the function
intel_pstate_calc_freq() was retired.
Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Refactoring code to use frequency table index instead of pstate_id.
This abstraction will make the code independent of the pstate values.

- No functional changes
- The highest frequency is at frequency table index 0 and the frequency
  decreases as the index increases.
- Macros pstates_to_idx() and idx_to_pstate() can be used for conversion
  between pstate_id and index.
- powernv_pstate_info now contains frequency table index to min, max and
  nominal frequency (instead of pstate_ids)
- global_pstate_info new stores index values instead pstate ids.
- variables renamed as *_idx which now store index instead of pstate
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If MSR_CONFIG_TDP_CONTROL is locked, we currently try to address some
MSR 0x80000648 or so. Mask out the relevant level bits 0 and 1.

Found while running over the Jailhouse hypervisor which became upset
about this strange MSR index.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch migrates few users of cpufreq tables to the new helpers
that work on sorted freq-tables.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq drivers aren't required to provide a sorted frequency table
today, and even the ones which provide a sorted table aren't handled
efficiently by cpufreq core.

This patch adds infrastructure to verify if the freq-table provided by
the drivers is sorted or not, and use efficient helpers if they are
sorted.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Both callers of cpufreq_update_current_freq(), cpufreq_update_policy()
and cpufreq_start_governor(), check cpufreq_suspended before calling
that function, so drop the redundant cpufreq_suspended check from it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

CPU notifications from the firmware coming in when cpufreq is
suspended cause cpufreq_update_current_freq() to return 0 which
triggers the WARN_ON() in cpufreq_update_policy() for no reason.

Avoid that by checking cpufreq_suspended before calling
cpufreq_update_current_freq().

Fixes: c9d9c929 (cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+

pid_params is written once by copy_pid_params() during initialization,
and thereafter is mostly read by hot path intel_pstate_update_util().
The read of pid_params gets more after commit a4675fbc ("cpufreq:
intel_pstate: Replace timers with utilization update callbacks")

pstate_funcs is written once by copy_cpu_funcs() during initialization,
and thereafter is mostly read by hot path intel_pstate_update_util()

hwp_active is written to once during initialization and thereafter is
mostly read by hot path intel_pstate_update_util().

The fact that they are mostly read and not written to makes them
candidates for __read_mostly declarations.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

These functions/variables are not needed after booting, so mark them
as __init or __initdata.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

__initdata should be placed between the variable name and equal sign
(if there is) for the variable to be placed in the intended section.
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

If of_match_node() fails, this init function bails out without
calling of_node_put().

Also change of_node_put(of_root) to of_node_put(np); both of them
hold the same pointer, but it seems better to call of_node_put()
against the node returned by of_find_node_by_path().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

intel_pstate_set_policy() is invoked by the cpufreq core during
driver initialization, on changes of policy attributes (minimim and
maximum frequency, for example) via sysfs and via CPU notifications
from the platform firmware.  On some platforms the latter may occur
relatively often.

Commit bb6ab52f (intel_pstate: Do not set utilization update hook
too early) made intel_pstate_set_policy() clear the CPU's utilization
update hook before updating the policy attributes for it (and set the
hook again after doind that), but that involves invoking
synchronize_sched() and adds overhead to the CPU notifications
mentioned above and to the sched-RCU handling in general.

That extra overhead is arguably not necessary, because updating
policy attributes when the CPU's utilization update hook is active
should not lead to any adverse effects, so drop the clearing of
the hook from intel_pstate_set_policy() and make it check if
the hook has been set already when attempting to set it.

Fixes: bb6ab52f (intel_pstate: Do not set utilization update hook too early)
Reported-by: Jisheng Zhang <jszhang@marvell.com>
Tested-by: Jisheng Zhang <jszhang@marvell.com>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull SCSI fixes from James Bottomley:
 "Two straightforward fixes.

  One is a concurrency issue only affecting SAS connected SATA drives,
  but which could hang the storage subsystem if it triggers (because the
  outstanding command count on error never goes back to zero) and the
  other is a NO_TAG fallout from the switch to hostwide tags which
  causes the system to crash on module insertion (we've checked
  carefully and only the 53c700 family of drivers is vulnerable to this
  issue)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  53c700: fix BUG on untagged commands
  scsi: fix race between simultaneous decrements of ->host_failed

Merge branch 'for-linus-4.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes part 2 from Chris Mason:
 "This has one patch from Omar to bring iterate_shared back to btrfs.

  We have a tree of work we queue up for directory items and it doesn't
  lend itself well to shared access.  While we're cleaning it up, Omar
  has changed things to use an exclusive lock when there are delayed
  items"

* 'for-linus-4.7-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix ->iterate_shared() by upgrading i_rwsem for delayed nodes

Pull btrfs fixes from Chris Mason:
 "I have a two part pull this time because one of the patches Dave
  Sterba collected needed to be against v4.7-rc2 or higher (we used
  rc4).  I try to make my for-linus-xx branch testable on top of the
  last major so we can hand fixes to people on the list more easily, so
  I've split this pull in two.

  This first part has some fixes and two performance improvements that
  we've been testing for some time.

  Josef's two performance fixes are most notable.  The transid tracking
  patch makes a big improvement on pretty much every workload"

* 'for-linus-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: Force stripesize to the value of sectorsize
  btrfs: fix disk_i_size update bug when fallocate() fails
  Btrfs: fix error handling in map_private_extent_buffer
  Btrfs: fix error return code in btrfs_init_test_fs()
  Btrfs: don't do nocow check unless we have to
  btrfs: fix deadlock in delayed_ref_async_start
  Btrfs: track transid for delayed ref flushing

Pull sound fixes from Takashi Iwai:
 "Again pretty calm weeks: we've had only a few trivial / stable
  HD-audio fixes in addition to a possible race fix for snd-dummy driver
  spotted by syzkaller"

* tag 'sound-4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: dummy: Fix a use-after-free at closing
  ALSA: hda / realtek - add two more Thinkpad IDs (5050,5053) for tpt460 fixup
  ALSA: hda - Fix the headset mic jack detection on Dell machine
  ALSA: hda/tegra: iomem fixups for sparse warnings
  ALSA: hdac_regmap - fix the register access for runtime PM

Pull x86 kprobe fix from Thomas Gleixner:
 "A single fix clearing the TF bit when a fault is single stepped"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Clear TF bit in fault on single-stepping

Pull scheduler fixes from Thomas Gleixner:
 "A couple of scheduler fixes:

   - force watchdog reset while processing sysrq-w

   - fix a deadlock when enabling trace events in the scheduler

   - fixes to the throttled next buddy logic

   - fixes for the average accounting (missing serialization and
     underflow handling)

   - allow kernel threads for fallback to online but not active cpus"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Allow kthreads to fall back to online && !active cpus
  sched/fair: Do not announce throttled next buddy in dequeue_task_fair()
  sched/fair: Initialize throttle_count for new task-groups lazily
  sched/fair: Fix cfs_rq avg tracking underflow
  kernel/sysrq, watchdog, sched/core: Reset watchdog on all CPUs while processing sysrq-w
  sched/debug: Fix deadlock when enabling sched events
  sched/fair: Fix post_init_entity_util_avg() serialization

Commit fe742fd4 ("Revert "btrfs: switch to ->iterate_shared()"")
backed out the conversion to ->iterate_shared() for Btrfs because the
delayed inode handling in btrfs_real_readdir() is racy. However, we can
still do readdir in parallel if there are no delayed nodes.

This is a temporary fix which upgrades the shared inode lock to an
exclusive lock only when we have delayed items until we come up with a
more complete solution. While we're here, rename the
btrfs_{get,put}_delayed_items functions to make it very clear that
they're just for readdir.

Tested with xfstests and by doing a parallel kernel build:

	while make tinyconfig && make -j4 && git clean dqfx; do
		:
	done

along with a bunch of parallel finds in another shell:

	while true; do
		for ((i=0; i<4; i++)); do
			find . >/dev/null &
		done
		wait
	done
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>

Pull locking fix from Thomas Gleixner:
 "A single fix to address a race in the static key logic"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/static_key: Fix concurrent static_key_slow_inc()

Pull irq fix from Thomas Gleixner:
 "A single fix for the fallout from the conversion of MIPS GIC to irq
  domains"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Fix IRQs in gic_dev_domain

Pull powerpc fixes from Michael Ellerman:
 "mm/radix (Aneesh Kumar K.V):
   - Update to tlb functions ric argument
   - Flush page walk cache when freeing page table
   - Update Radix tree size as per ISA 3.0

  mm/hash (Aneesh Kumar K.V):
   - Use the correct PPP mask when updating HPTE
   - Don't add memory coherence if cache inhibited is set

  eeh (Gavin Shan):
   - Fix invalid cached PE primary bus

  bpf/jit (Naveen N. Rao):
   - Disable classic BPF JIT on ppc64le

  .. and fix faults caused by radix patching of SLB miss handler
  (Michael Ellerman)"

* tag 'powerpc-4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/bpf/jit: Disable classic BPF JIT on ppc64le
  powerpc: Fix faults caused by radix patching of SLB miss handler
  powerpc/eeh: Fix invalid cached PE primary bus
  powerpc/mm/radix: Update Radix tree size as per ISA 3.0
  powerpc/mm/hash: Don't add memory coherence if cache inhibited is set
  powerpc/mm/hash: Use the correct PPP mask when updating HPTE
  powerpc/mm/radix: Flush page walk cache when freeing page table
  powerpc/mm/radix: Update to tlb functions ric argument

Commit b235beea ("Clarify naming of thread info/stack allocators")
breaks the build on some powerpc configs, where THREAD_SIZE < PAGE_SIZE:

  kernel/fork.c:235:2: error: implicit declaration of function 'free_thread_stack'
  kernel/fork.c:355:8: error: assignment from incompatible pointer type
    stack = alloc_thread_stack_node(tsk, node);
    ^

Fix it by renaming free_stack() to free_thread_stack(), and updating the
return type of alloc_thread_stack_node().

Fixes: b235beea ("Clarify naming of thread info/stack allocators")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge misc fixes from Andrew Morton:
 "Two weeks worth of fixes here"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (41 commits)
  init/main.c: fix initcall_blacklisted on ia64, ppc64 and parisc64
  autofs: don't get stuck in a loop if vfs_write() returns an error
  mm/page_owner: avoid null pointer dereference
  tools/vm/slabinfo: fix spelling mistake: "Ocurrences" -> "Occurrences"
  fs/nilfs2: fix potential underflow in call to crc32_le
  oom, suspend: fix oom_reaper vs. oom_killer_disable race
  ocfs2: disable BUG assertions in reading blocks
  mm, compaction: abort free scanner if split fails
  mm: prevent KASAN false positives in kmemleak
  mm/hugetlb: clear compound_mapcount when freeing gigantic pages
  mm/swap.c: flush lru pvecs on compound page arrival
  memcg: css_alloc should return an ERR_PTR value on error
  memcg: mem_cgroup_migrate() may be called with irq disabled
  hugetlb: fix nr_pmds accounting with shared page tables
  Revert "mm: disable fault around on emulated access bit architecture"
  Revert "mm: make faultaround produce old ptes"
  mailmap: add Boris Brezillon's email
  mailmap: add Antoine Tenart's email
  mm, sl[au]b: add __GFP_ATOMIC to the GFP reclaim mask
  mm: mempool: kasan: don't poot mempool objects in quarantine
  ...

Pull rdma fixes from Doug Ledford:
 "This is the second batch of queued up rdma patches for this rc cycle.

  There isn't anything really major in here.  It's passed 0day,
  linux-next, and local testing across a wide variety of hardware.
  There are still a few known issues to be tracked down, but this should
  amount to the vast majority of the rdma RC fixes.

  Round two of 4.7 rc fixes:

   - A couple minor fixes to the rdma core
   - Multiple minor fixes to hfi1
   - Multiple minor fixes to mlx4/mlx4
   - A few minor fixes to i40iw"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (31 commits)
  IB/srpt: Reduce QP buffer size
  i40iw: Enable level-1 PBL for fast memory registration
  i40iw: Return correct max_fast_reg_page_list_len
  i40iw: Correct status check on i40iw_get_pble
  i40iw: Correct CQ arming
  IB/rdmavt: Correct qp_priv_alloc() return value test
  IB/hfi1: Don't zero out qp->s_ack_queue in rvt_reset_qp
  IB/hfi1: Fix deadlock with txreq allocation slow path
  IB/mlx4: Prevent cross page boundary allocation
  IB/mlx4: Fix memory leak if QP creation failed
  IB/mlx4: Verify port number in flow steering create flow
  IB/mlx4: Fix error flow when sending mads under SRIOV
  IB/mlx4: Fix the SQ size of an RC QP
  IB/mlx5: Fix wrong naming of port_rcv_data counter
  IB/mlx5: Fix post send fence logic
  IB/uverbs: Initialize ib_qp_init_attr with zeros
  IB/core: Fix false search of the IB_SA_WELL_KNOWN_GUID
  IB/core: Fix RoCE v1 multicast join logic issue
  IB/core: Fix no default GIDs when netdevice reregisters
  IB/hfi1: Send a pkey change event on driver pkey update
  ...

Pull HID fix from Jiri Kosina:
 "hiddev ioctl() validation fix from Scott Bauer"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commands

Merge tag 'hwmon-for-linus-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fix from Guenter Roeck:
 "Improve fan type detection for dell-smm to prevent kernel hang"

* tag 'hwmon-for-linus-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (dell-smm) Cache fan_type() calls and change fan detection

Pull ACPI fix from Rafael Wysocki:
 "Stable-candidate fix for a deadlock in ACPICA introduced during the
  4.5 development cycle by a commit attempting to improve the handling
  of AML code that doesn't belong to any namespace objects in a given
  definition block (Lv Zheng)"

* tag 'acpi-4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading

Pull power management fixes from Rafael Wysocki:
 "Fix for a latent cpufreq driver bug uncovered by a recent ACPICA
  change and several fixes for the devfreq framework, including one fix
  for an issue introduced recently.

  Specifics:

   - Fix a latent initialization issue in the pcc-cpufreq driver
     (incorrect initial value of a structure field) that has been
     uncovered by a recent ACPICA commit (Mike Galbraith).

   - Add a missing notification in an update_devfreq() error code path
     forgotten by a recent devfreq commit (Chanwoo Choi).

   - Fix devfreq device frequency initialization (Lukasz Luba).

   - Fix an incorrect IS_ERR() check in the devfreq framework discovered
     by the Smatch checker (Dan Carpenter).

   - Drop two excessive put_device() calls from the devfreq framework
     (MyungJoo Ham, Cai Zhiyong).

   - Fix a possible memory leak in the devfreq framework and drop an
     unnecessary kfree() invocation from it (MyungJoo Ham)"

* tag 'pm-4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / devfreq: Send the DEVFREQ_POSTCHANGE notification when target() is failed
  cpufreq: pcc-cpufreq: Fix doorbell.access_width
  PM / devfreq: fix initialization of current frequency in last status
  PM / devfreq: exynos-nocp: Remove incorrect IS_ERR() check
  PM / devfreq: remove double put_device
  PM / devfreq: fix double call put_device
  PM / devfreq: fix duplicated kfree on devfreq pointer
  PM / devfreq: devm_kzalloc to have dev pointer more precisely