- 16 Aug, 2016 35 commits
-
-
Vladimir Davydov authored
commit 615d66c3 upstream. Since commit 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") swap entries do not pin memcg->css.refcnt directly. Instead, they pin memcg->id.ref. So we should adjust the reference counters accordingly when moving swap charges between cgroups. Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Link: http://lkml.kernel.org/r/9ce297c64954a42dc90b543bc76106c4a94f07e8.1470219853.git.vdavydov@virtuozzo.comSigned-off-by:
Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vladimir Davydov authored
commit 1f47b61f upstream. An offline memory cgroup might have anonymous memory or shmem left charged to it and no swap. Since only swap entries pin the id of an offline cgroup, such a cgroup will have no id and so an attempt to swapout its anon/shmem will not store memory cgroup info in the swap cgroup map. As a result, memcg->swap or memcg->memsw will never get uncharged from it and any of its ascendants. Fix this by always charging swapout to the first ancestor cgroup that hasn't released its id yet. [hannes@cmpxchg.org: add comment to mem_cgroup_swapout] [vdavydov@virtuozzo.com: use WARN_ON_ONCE() in mem_cgroup_id_get_online()] Link: http://lkml.kernel.org/r/20160803123445.GJ13263@esperanza Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs") Link: http://lkml.kernel.org/r/5336daa5c9a32e776067773d9da655d2dc126491.1470219853.git.vdavydov@virtuozzo.comSigned-off-by:
-
Naveen N. Rao authored
commit 844e3be4 upstream. Classic BPF JIT was never ported completely to work on little endian powerpc. However, it can be enabled and will crash the system when used. As such, disable use of BPF JIT on ppc64le. Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.") Reported-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Gavin Shan authored
commit a3aa256b upstream. The PE primary bus cannot be got from its child devices when having full hotplug in error recovery. The PE primary bus is cached, which is done in commit <05ba75f8> ("powerpc/eeh: Fix stale cached primary bus"). In eeh_reset_device(), the flag (EEH_PE_PRI_BUS) is cleared before the PCI hot remove. eeh_pe_bus_get() then returns NULL as the PE primary bus in pnv_eeh_reset() and it crashes the kernel eventually. This fixes the issue by clearing the flag (EEH_PE_PRI_BUS) before the PCI hot add. With it, the PowerNV EEH reset backend (pnv_eeh_reset()) can get valid PE primary bus through eeh_pe_bus_get(). Fixes: 67086e32 ("powerpc/eeh: powerpc/eeh: Support error recovery for VF PE") Reported-by:
Pridhiviraj Paidipeddi <ppaiddipe@in.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
Alden Tondettar authored
commit a47241cd upstream. Presently, a corrupted or malicious UDF filesystem containing a very large number (or cycle) of Logical Volume Integrity Descriptor extent indirections may trigger a stack overflow and kernel panic in udf_load_logicalvolint() on mount. Replace the unnecessary recursion in udf_load_logicalvolint() with simple iteration. Set an arbitrary limit of 1000 indirections (which would have almost certainly overflowed the stack without this fix), and treat such cases as if there were no LVID. Signed-off-by:
Alden Tondettar <alden.tondettar@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Toshi Kani authored
commit 1886297c upstream. The following BUG_ON() crash was reported on QEMU/i386: kernel BUG at arch/x86/mm/physaddr.c:79! Call Trace: phys_mem_access_prot_allowed mmap_mem ? mmap_region mmap_region do_mmap vm_mmap_pgoff SyS_mmap_pgoff do_int80_syscall_32 entry_INT80_32 after commit: edfe63ec ("x86/mtrr: Fix Xorg crashes in Qemu sessions") PAT is now set to disabled state when MTRRs are disabled. Thus, reactivating the __pa(high_memory) check in phys_mem_access_prot_allowed(). When CONFIG_DEBUG_VIRTUAL is set, __pa() calls __phys_addr(), which in turn calls slow_virt_to_phys() for 'high_memory'. Because 'high_memory' is set to (the max direct mapped virt addr + 1), it is not a valid virtual address. Hence, slow_virt_to_phys() returns 0 and hit the BUG_ON. Using __pa_nodebug() instead of __pa() will fix this BUG_ON. However, this code block, originally written for Pentiums and earlier, is no longer adequate since a 32-bit Xen guest has MTRRs disabled and supports ZONE_HIGHMEM. In this setup, this code sets UC attribute for accessing RAM in high memory range. Delete this code block as it has been unused for a long time. Reported-by:
kernel test robot <ying.huang@linux.intel.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Toshi Kani <toshi.kani@hpe.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1460403360-25441-1-git-send-email-toshi.kani@hpe.com Link: https://lkml.org/lkml/2016/4/1/608Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Toshi Kani authored
commit b6350c21 upstream. Update PAT documentation to describe how PAT is initialized under various configurations. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Toshi Kani <toshi.kani@hp.com> Cc: elliott@hpe.com Cc: konrad.wilk@oracle.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-8-git-send-email-toshi.kani@hpe.comSigned-off-by:
-
Toshi Kani authored
commit 88ba2811 upstream. Xen supports PAT without MTRRs for its guests. In order to enable WC attribute, it was necessary for xen_start_kernel() to call pat_init_cache_modes() to update PAT table before starting guest kernel. Now that the kernel initializes PAT table to the BIOS handoff state when MTRR is disabled, this Xen-specific PAT init code is no longer necessary. Delete it from xen_start_kernel(). Also change __init_cache_modes() to a static function since PAT table should not be tweaked by other modules. Signed-off-by:
Juergen Gross <jgross@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Luis R. Rodriguez <mcgrof@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Toshi Kani <toshi.kani@hp.com> Cc: elliott@hpe.com Cc: paul.gortmaker@windriver.com Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1458769323-24491-7-git-send-email-toshi.kani@hpe.comSigned-off-by:
-
Toshi Kani authored
commit ad025a73 upstream. get_mtrr_state() calls pat_init() on BSP even if MTRR is disabled. This results in calling pat_init() on BSP only since APs do not call pat_init() when MTRR is disabled. This inconsistency between BSP and APs leads to undefined behavior. Make BSP's calling condition to pat_init() consistent with AP's, mtrr_ap_init() and mtrr_aps_init(). Signed-off-by:
-
Toshi Kani authored
commit edfe63ec upstream. A Xorg failure on qemu32 was reported as a regression [1] caused by commit 9cd25aac ("x86/mm/pat: Emulate PAT when it is disabled"). This patch fixes the Xorg crash. Negative effects of this regression were the following two failures [2] in Xorg on QEMU with QEMU CPU model "qemu32" (-cpu qemu32), which were triggered by the fact that its virtual CPU does not support MTRRs. #1. copy_process() failed in the check in reserve_pfn_range() copy_process copy_mm dup_mm dup_mmap copy_page_range track_pfn_copy reserve_pfn_range A WC map request was tracked as WC in memtype, which set a PTE as UC (pgprot) per __cachemode2pte_tbl[]. This led to this error in reserve_pfn_range() called from track_pfn_copy(), which obtained a pgprot from a PTE. It converts pgprot to page_cache_mode, which does not necessarily result in the original page_cache_mode since __cachemode2pte_tbl[] redirects multiple types to UC. #2. error path in copy_process() then hit WARN_ON_ONCE in untrack_pfn(). x86/PAT: Xorg:509 map pfn expected mapping type uncached- minus for [mem 0xfd000000-0xfdffffff], got write-combining Call Trace: dump_stack warn_slowpath_common ? untrack_pfn ? untrack_pfn warn_slowpath_null untrack_pfn ? __kunmap_atomic unmap_single_vma ? pagevec_move_tail_fn unmap_vmas exit_mmap mmput copy_process.part.47 _do_fork SyS_clone do_syscall_32_irqs_on entry_INT80_32 These negative effects are caused by two separate bugs, but they can be addressed in separate patches. Fixing the pat_init() issue described below addresses the root cause, and avoids Xorg to hit these cases. When the CPU does not support MTRRs, MTRR does not call pat_init(), which leaves PAT enabled without initializing PAT. This pat_init() issue is a long-standing issue, but manifested as issue #1 (and then hit issue #2) with the above-mentioned commit because the memtype now tracks cache attribute with 'page_cache_mode'. This pat_init() issue existed before the commit, but we used pgprot in memtype. Hence, we did not have issue #1 before. But WC request resulted in WT in effect because WC pgrot is actually WT when PAT is not initialized. This is not how it was designed to work. When PAT is set to disable properly, WC is converted to UC. The use of WT can result in a system crash if the target range does not support WT. Fortunately, nobody ran into such issue before. To fix this pat_init() issue, PAT code has been enhanced to provide pat_disable() interface. Call this interface when MTRRs are disabled. By setting PAT to disable properly, PAT bypasses the memtype check, and avoids issue #1. [1]: https://lkml.org/lkml/2016/3/3/828 [2]: https://lkml.org/lkml/2016/3/4/775Signed-off-by:
-
Toshi Kani authored
commit d63dcf49 upstream. Borislav Petkov suggested: > Please use on init paths boot_cpu_has(X86_FEATURE_PAT) and on fast > paths static_cpu_has(X86_FEATURE_PAT). No more of that cpu_has_XXX > ugliness. Replace the use of cpu_has_pat on init paths with boot_cpu_has(). Suggested-by:
-
Toshi Kani authored
commit 224bb1e5 upstream. In preparation for fixing a regression caused by: 9cd25aac ("x86/mm/pat: Emulate PAT when it is disabled") ... PAT needs to provide an interface that prevents the OS from initializing the PAT MSR. PAT MSR initialization must be done on all CPUs using the specific sequence of operations defined in the Intel SDM. This requires MTRRs to be enabled since pat_init() is called as part of MTRR init from mtrr_rendezvous_handler(). Make pat_disable() as the interface that prevents the OS from initializing the PAT MSR. MTRR will call this interface when it cannot provide the SDM-defined sequence to initialize PAT. This also assures that pat_disable() called from pat_bsp_init() will set the PAT table properly when CPU does not support PAT. Signed-off-by:
-
Toshi Kani authored
commit 02f037d6 upstream. In preparation for fixing a regression caused by: 9cd25aac ("x86/mm/pat: Emulate PAT when it is disabled")' ... PAT needs to support a case that PAT MSR is initialized with a non-default value. When pat_init() is called and PAT is disabled, it initializes the PAT table with the BIOS default value. Xen, however, sets PAT MSR with a non-default value to enable WC. This causes inconsistency between the PAT table and PAT MSR when PAT is set to disable on Xen. Change pat_init() to handle the PAT disable cases properly. Add init_cache_modes() to handle two cases when PAT is set to disable. 1. CPU supports PAT: Set PAT table to be consistent with PAT MSR. 2. CPU does not support PAT: Set PAT table to be consistent with PWT and PCD bits in a PTE. Note, __init_cache_modes(), renamed from pat_init_cache_modes(), will be changed to a static function in a later patch. Signed-off-by:
-
Theodore Ts'o authored
commit 86a574de upstream. Don't allow RNDADDTOENTCNT or RNDADDENTROPY to accept a negative entropy value. It doesn't make any sense to subtract from the entropy counter, and it can trigger a warning: random: negative entropy/overflow: pool input count -40000 ------------[ cut here ]------------ WARNING: CPU: 3 PID: 6828 at drivers/char/random.c:670[< none >] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670 Modules linked in: CPU: 3 PID: 6828 Comm: a.out Not tainted 4.7.0-rc4+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffffffff880b58e0 ffff88005dd9fcb0 ffffffff82cc838f ffffffff87158b40 fffffbfff1016b1c 0000000000000000 0000000000000000 ffffffff87158b40 ffffffff83283dae 0000000000000009 ffff88005dd9fcf8 ffffffff8136d27f Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff82cc838f>] dump_stack+0x12e/0x18f lib/dump_stack.c:51 [<ffffffff8136d27f>] __warn+0x19f/0x1e0 kernel/panic.c:516 [<ffffffff8136d48c>] warn_slowpath_null+0x2c/0x40 kernel/panic.c:551 [<ffffffff83283dae>] credit_entropy_bits+0x21e/0xad0 drivers/char/random.c:670 [< inline >] credit_entropy_bits_safe drivers/char/random.c:734 [<ffffffff8328785d>] random_ioctl+0x21d/0x250 drivers/char/random.c:1546 [< inline >] vfs_ioctl fs/ioctl.c:43 [<ffffffff8185316c>] do_vfs_ioctl+0x18c/0xff0 fs/ioctl.c:674 [< inline >] SYSC_ioctl fs/ioctl.c:689 [<ffffffff8185405f>] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:680 [<ffffffff86a995c0>] entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 ---[ end trace 5d4902b2ba842f1f ]--- This was triggered using the test program: // autogenerated by syzkaller (http://github.com/google/syzkaller) int main() { int fd = open("/dev/random", O_RDWR); int val = -5000; ioctl(fd, RNDADDTOENTCNT, &val); return 0; } It's harmless in that (a) only root can trigger it, and (b) after complaining the code never does let the entropy count go negative, but it's better to simply not allow this userspace from passing in a negative entropy value altogether. Google-Bug-Id: #29575089 Reported-By:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Axel Lin authored
commit 43160ffd upstream. Use regulator_list_voltage_linear_range in rpm_smps_ldo_ops_fixed is wrong because it is used for fixed regulator without any linear range. The rpm_smps_ldo_ops_fixed is used for pm8941_lnldo which has fixed_uV set and n_voltages = 1. In this case, regulator_list_voltage() can return rdev->desc->fixed_uV without .list_voltage implementation. Fixes: 3bfbb4d1 ("regulator: qcom_smd: add list_voltage callback") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
John Johansen authored
commit 0b938a2e upstream. Signed-off-by:
John Johansen <john.johansen@canonical.com> Acked-by:
Seth Arnold <seth.arnold@canonical.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 2aee309d upstream. A failure in the get_txreq() inline will result in a slow path retry using __get_txreq(). __get_txreq() attempts to procure the qp s_lock, which is already held in all callers. Fix by deleting the s_lock maintenance in __get_txreq() and add sparse syntax hooks to future proof the code. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 896ce45d upstream. There are several computatations of the sc in the ud receive routine. Besides the code duplication, all are wrong when the sc is greater than 15. In that case the code incorrectly or's a 1 into the computed sc instead of 1 shifted left by 4. Fix precomputed sc5 by using an already implemented routine hdr2sc() and deleting flawed duplicated code. Cc: Stable <stable@vger.kernel.org> # 4.6+ Reviewed-by:
-
David Howells authored
commit 20f06ed9 upstream. MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl. The latter will work in a lot of cases, thereby hiding the issue. Reported-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: keyrings@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13832/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Dave Weinstein authored
commit 7de24996 upstream. Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop(). This fixes CVE-2016-3857, a local privilege escalation under CONFIG_OABI_COMPAT. Reported-by:
Chiachih Wu <wuchiachih@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Dave Weinstein <olorin@google.com> Signed-off-by:
-
Mika Westerberg authored
commit a7ae8195 upstream. Many Intel systems the BIOS declares a SystemIO OpRegion below the SMBus PCI device as can be seen in ACPI DSDT table from Lenovo Yoga 900: Device (SBUS) { OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10) Field (SMBI, ByteAcc, NoLock, Preserve) { HSTS, 8, Offset (0x02), HCON, 8, HCOM, 8, TXSA, 8, DAT0, 8, DAT1, 8, HBDR, 8, PECR, 8, RXSA, 8, SDAT, 16 } There are also bunch of AML methods that that the BIOS can use to access these fields. Most of the systems in question AML methods accessing the SMBI OpRegion are never used. Now, because of this SMBI OpRegion many systems fail to load the SMBus driver with an error looking like one below: ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver The reason is that this SMBI OpRegion conflicts with the PCI BAR used by the SMBus driver. It turns out that we can install a custom SystemIO address space handler for the SMBus device to intercept all accesses through that OpRegion. This allows us to share the PCI BAR with the AML code if it for some reason is using it. We do not expect that this OpRegion handler will ever be called but if it is we print a warning and prevent all access from the SMBus driver itself. Link: https://bugzilla.kernel.org/show_bug.cgi?id=110041Reported-by:
Andy Lutomirski <luto@kernel.org> Reported-by:
Pali Rohár <pali.rohar@gmail.com> Suggested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit f626300a ] tcp_select_initial_window() intends to advertise a window scaling for the maximum possible window size. To do so, it considers the maximum of net.ipv4.tcp_rmem[2] and net.core.rmem_max as the only possible upper-bounds. However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE to set the socket's receive buffer size to values larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max. Thus, SO_RCVBUFFORCE is effectively ignored by tcp_select_initial_window(). To fix this, consider the maximum of net.ipv4.tcp_rmem[2], net.core.rmem_max and socket's initial buffer space. Fixes: b0573dea ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Suggested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Beniamino Galvani authored
[ Upstream commit e3a3b626 ] macsec_decrypt() is not called when validation is disabled and so macsec_skb_cb(skb)->rx_sa is not set; but it is used later in macsec_post_decrypt(), ensure that it's always initialized. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Beniamino Galvani <bgalvani@redhat.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 59d3f1ce ] Slowpath completion handling is incorrectly changing SPQ_RING_SIZE bits instead of a single one. Fixes: 76a9a364 ("qed: fix handling of concurrent ramrods") Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit d3e6952c ] I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Mike Manning authored
[ Upstream commit ea06f717 ] Default kernel behavior is to delete IPv6 addresses on link down, which entails deletion of the multicast and the subnet-router anycast addresses. These deletions do not happen with sysctl setting to keep global IPv6 addresses on link down, so every link down/up causes an increment of the anycast and multicast refcounts. These bogus refcounts may stop these addrs from being removed on subsequent calls to delete them. The solution is to leave the groups for the multicast and subnet anycast on link down for the callflow when global IPv6 addresses are kept. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by:
Mike Manning <mmanning@brocade.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit baedbe55 ] Commit 8626c56c ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") caused LLDP packets arriving through a bridge port to be re-injected to the Rx path with skb->dev set to the bridge device, but this breaks the lldpad daemon. The lldpad daemon opens a packet socket with protocol set to ETH_P_LLDP for any valid device on the system, which doesn't not include soft devices such as bridge and VLAN. Since packet sockets (ptype_base) are processed in the Rx path after the Rx handler, LLDP packets with skb->dev set to the bridge device never reach the lldpad daemon. Fix this by making the bridge's Rx handler re-inject LLDP packets with RX_HANDLER_PASS, which effectively restores the behaviour prior to the mentioned commit. This means netfilter will never receive LLDP packets coming through a bridge port, as I don't see a way in which we can have okfn() consume the packet without breaking existing behaviour. I've already carried out a similar fix for STP packets in commit 56fae404 ("bridge: Fix incorrect re-injection of STP packets"). Fixes: 8626c56c ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Cc: Florian Westphal <fw@strlen.de> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 18d3df3e ] macsec can't cope with mtu frames which need vlan tag insertion, and vlan device set the default mtu equal to the underlying dev's one. By default vlan over macsec devices use invalid mtu, dropping all the large packets. This patch adds a netif helper to check if an upper vlan device needs mtu reduction. The helper is used during vlan devices initialization to set a valid default and during mtu updating to forbid invalid, too bit, mtu values. The helper currently only check if the lower dev is a macsec device, if we get more users, we need to update only the helper (possibly reserving an additional IFF bit). Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit e86663c4 ] Nothing is decrementing the index "i" while we are cleaning up the fragments we could not successful transmit. Fixes: 9cde9450 ("bgmac: implement scatter/gather support") Reported-by: coverity (CID 1352048) Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Beniamino Galvani authored
[ Upstream commit 005db31d ] Commit e826eafa ("bonding: Call netif_carrier_off after register_netdevice") moved netif_carrier_off() from bond_init() to bond_create(), but the latter is called only for initial default devices and ones created through sysfs: $ modprobe bonding $ echo +bond1 > /sys/class/net/bonding_masters $ ip link add bond2 type bond $ grep "MII Status" /proc/net/bonding/* /proc/net/bonding/bond0:MII Status: down /proc/net/bonding/bond1:MII Status: down /proc/net/bonding/bond2:MII Status: up Ensure that carrier is initially off also for devices created through netlink. Signed-off-by:
-
Jason Baron authored
[ Upstream commit 083ae308 ] The per-socket rate limit for 'challenge acks' was introduced in the context of limiting ack loops: commit f2b2c582 ("tcp: mitigate ACK loops for connections as tcp_sock") And I think it can be extended to rate limit all 'challenge acks' on a per-socket basis. Since we have the global tcp_challenge_ack_limit, this patch allows for tcp_challenge_ack_limit to be set to a large value and effectively rely on the per-socket limit, or set tcp_challenge_ack_limit to a lower value and still prevents a single connections from consuming the entire challenge ack quota. It further moves in the direction of eliminating the global limit at some point, as Eric Dumazet has suggested. This a follow-up to: Subject: tcp: make challenge acks less predictable Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 75ff39cc ] Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6 ("tcp: implement RFC 5961 3.2") Reported-by:
Yue Cao <ycao009@ucr.edu> Signed-off-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 205e1e25 ] Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Dan Williams authored
commit 1ee6667c upstream. The updated ndctl unit tests discovered that if a pfn configuration with a 4K alignment is read from the namespace, that alignment will be ignored in favor of the default 2M alignment. The result is that the configuration will fail initialization with a message like: dax6.1: bad offset: 0x22000 dax disabled align: 0x200000 Fix this by allowing the alignment read from the info block to override the default which is 2M not 0 in the autodetect path. This also fixes a similar problem with the mode and alignment settings silently being overwritten by the kernel when userspace has changed it. We now will either overwrite the info block if userspace changes the uuid or fail and warn if a live setting disagrees with the info block. Cc: Micah Parrish <micah.parrish@hpe.com> Cc: Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 45a0dac0 upstream. We want to use the alignment as the allocation and mapping unit. Previously this information was only useful for establishing the data offset, but now it is important to remember the granularity for the later use. Signed-off-by:
-
- 10 Aug, 2016 5 commits
-
-
Greg Kroah-Hartman authored
-
Paul Burton authored
commit a60ae81e upstream. Fix mips_cm_max_vp_width for UP kernels where it previously referenced smp_num_siblings, which is not declared for UP kernels. This led to build errors such as the following: drivers/built-in.o: In function `$L446': irq-mips-gic.c:(.text+0x1994): undefined reference to `smp_num_siblings' drivers/built-in.o:irq-mips-gic.c:(.text+0x199c): more undefined references to `smp_num_siblings' follow On UP kernels simply return 1, leaving the reference to smp_num_siblings in place only for SMP kernels. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12332/Signed-off-by:
-
Miklos Szeredi authored
commit c1892c37 upstream. file_remove_privs() is called with inode lock on file_inode(), which proceeds to calling notify_change() on file->f_path.dentry. Which triggers the WARN_ON_ONCE(!inode_is_locked(inode)) in addition to deadlocking later when ovl_setattr tries to lock the underlying inode again. Fix this mess by not mixing the layers, but doing everything on underlying dentry/inode. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 07a2daab ("ovl: Copy up underlying inode's ->i_mode to overlay inode") Signed-off-by:
-
Scott Bauer authored
commit 10eec60c upstream. This prevents a double-fetch from user space that can lead to to an undersized allocation and heap overflow. Fixes: 54dbc151 ("vfs: hoist the btrfs deduplication ioctl to the vfs") Signed-off-by:
Scott Bauer <sbauer@plzdonthack.me> Signed-off-by:
-
Alexander Shishkin authored
commit a36aa80f upstream. Driver initialization tries to request a hub (GTH) driver module from its probe callback, resulting in a deadlock. This patch solves the problem by adding a deferred work for requesting the hub module. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
