__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pte_alloc_one{_kernel}, pmd_alloc_one allocate PTE_ORDER resp.
PMD_ORDER but both are not larger than 1.  This means that this flag has
never been actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-8-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

pte_alloc_one_kernel uses __get_order_pte but this is obviously always
zero because BITS_FOR_PTE is not larger than 9 yet the page size is
always larger than 4K.  This means that this flag has never been
actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-7-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

{pte,pmd,pud}_alloc_one{_kernel}, late_pgtable_alloc use PGALLOC_GFP for
__get_free_page (aka order-0).

pgd_alloc is slightly more complex because it allocates from pgd_cache
if PGD_SIZE != PAGE_SIZE and PGD_SIZE depends on the configuration
(CONFIG_ARM64_VA_BITS, PAGE_SHIFT and CONFIG_PGTABLE_LEVELS).

As per
config PGTABLE_LEVELS
	int
	default 2 if ARM64_16K_PAGES && ARM64_VA_BITS_36
	default 2 if ARM64_64K_PAGES && ARM64_VA_BITS_42
	default 3 if ARM64_64K_PAGES && ARM64_VA_BITS_48
	default 3 if ARM64_4K_PAGES && ARM64_VA_BITS_39
	default 3 if ARM64_16K_PAGES && ARM64_VA_BITS_47
	default 4 if !ARM64_64K_PAGES && ARM64_VA_BITS_48

we should have the following options

  CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:4k size:4096 pages:1
  CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:4 PAGE_SIZE:16k size:16 pages:1
  CONFIG_ARM64_VA_BITS:48 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:64k size:512 pages:1
  CONFIG_ARM64_VA_BITS:47 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:16k size:16384 pages:1
  CONFIG_ARM64_VA_BITS:42 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:64k size:65536 pages:1
  CONFIG_ARM64_VA_BITS:39 CONFIG_PGTABLE_LEVELS:3 PAGE_SIZE:4k size:4096 pages:1
  CONFIG_ARM64_VA_BITS:36 CONFIG_PGTABLE_LEVELS:2 PAGE_SIZE:16k size:16384 pages:1

All of them fit into a single page (aka order-0).  This means that this
flag has never been actually useful here because it has always been used
only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-6-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

efi_alloc_page_tables uses __GFP_REPEAT but it allocates an order-0
page.  This means that this flag has never been actually useful here
because it has always been used only for PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-4-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.

PGALLOC_GFP uses __GFP_REPEAT but none of the allocation which uses this
flag is for more than order-0.  This means that this flag has never been
actually useful here because it has always been used only for
PAGE_ALLOC_COSTLY requests.

Link: http://lkml.kernel.org/r/1464599699-30131-3-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the third version of the patchset previously sent [1].  I have
basically only rebased it on top of 4.7-rc1 tree and dropped "dm: get
rid of superfluous gfp flags" which went through dm tree.  I am sending
it now because it is tree wide and chances for conflicts are reduced
considerably when we want to target rc2.  I plan to send the next step
and rename the flag and move to a better semantic later during this
release cycle so we will have a new semantic ready for 4.8 merge window
hopefully.

Motivation:

While working on something unrelated I've checked the current usage of
__GFP_REPEAT in the tree.  It seems that a majority of the usage is and
always has been bogus because __GFP_REPEAT has always been about costly
high order allocations while we are using it for order-0 or very small
orders very often.  It seems that a big pile of them is just a
copy&paste when a code has been adopted from one arch to another.

I think it makes some sense to get rid of them because they are just
making the semantic more unclear.  Please note that GFP_REPEAT is
documented as

* __GFP_REPEAT: Try hard to allocate the memory, but the allocation attempt

* _might_ fail.  This depends upon the particular VM implementation.
  while !costly requests have basically nofail semantic.  So one could
  reasonably expect that order-0 request with __GFP_REPEAT will not loop
  for ever.  This is not implemented right now though.

I would like to move on with __GFP_REPEAT and define a better semantic
for it.

  $ git grep __GFP_REPEAT origin/master | wc -l
  111
  $ git grep __GFP_REPEAT | wc -l
  36

So we are down to the third after this patch series.  The remaining
places really seem to be relying on __GFP_REPEAT due to large allocation
requests.  This still needs some double checking which I will do later
after all the simple ones are sorted out.

I am touching a lot of arch specific code here and I hope I got it right
but as a matter of fact I even didn't compile test for some archs as I
do not have cross compiler for them.  Patches should be quite trivial to
review for stupid compile mistakes though.  The tricky parts are usually
hidden by macro definitions and thats where I would appreciate help from
arch maintainers.

[1] http://lkml.kernel.org/r/1461849846-27209-1-git-send-email-mhocko@kernel.org

This patch (of 19):

__GFP_REPEAT has a rather weak semantic but since it has been introduced
around 2.6.12 it has been ignored for low order allocations.  Yet we
have the full kernel tree with its usage for apparently order-0
allocations.  This is really confusing because __GFP_REPEAT is
explicitly documented to allow allocation failures which is a weaker
semantic than the current order-0 has (basically nofail).

Let's simply drop __GFP_REPEAT from those places.  This would allow to
identify place which really need allocator to retry harder and formulate
a more specific semantic for what the flag is supposed to do actually.

Link: http://lkml.kernel.org/r/1464599699-30131-2-git-send-email-mhocko@kernel.orgSigned-off-by: Michal Hocko <mhocko@suse.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com> [for tile]
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Crispin <blogic@openwrt.org>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When fallocate is interrupted it will undo a range that extends one byte
past its range of allocated pages.  This can corrupt an in-use page by
zeroing out its first byte.  Instead, undo using the inclusive byte
range.

Fixes: 1635f6a7 ("tmpfs: undo fallocation on failure")
Link: http://lkml.kernel.org/r/1462713387-16724-1-git-send-email-anthony.romano@coreos.comSigned-off-by: Anthony Romano <anthony.romano@coreos.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Brandon Philips <brandon@ifup.co>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The write at the end of the test to restore nr_hugepages to its previous
value is failing.  This is because it is trying to write the number of
bytes in the char array as opposed to the number of bytes in the string.

Link: http://lkml.kernel.org/r/1465331205-3284-1-git-send-email-mike.kravetz@oracle.comSigned-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Eric B Munson <emunson@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 36324a99 ("oom: clear TIF_MEMDIE after oom_reaper
managed to unmap the address space") changed to use find_lock_task_mm()
for finding a mm_struct to reap, it is guaranteed that mm->mm_users > 0
because find_lock_task_mm() returns a task_struct with ->mm != NULL.
Therefore, we can safely use atomic_inc().

Link: http://lkml.kernel.org/r/1465024759-8074-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit e2fe1456 ("oom_reaper: close race with exiting task") reduced
frequency of needlessly selecting next OOM victim, but was calling
mmput_async() when atomic_inc_not_zero() failed.

Link: http://lkml.kernel.org/r/1464423365-5555-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpSigned-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull UBI/UBIFS fixes from Richard Weinberger:
 "This contains fixes for two critical bugs in UBI and UBIFS:

   - fix the possibility of losing data upon a power cut when UBI tries
     to recover from a write error

   - fix page migration on UBIFS.  It turned out that the default page
     migration function is not suitable for UBIFS"

* tag 'upstream-4.7-rc5' of git://git.infradead.org/linux-ubifs:
  UBIFS: Implement ->migratepage()
  mm: Export migrate_page_move_mapping and migrate_page_copy
  ubi: Make recover_peb power cut aware
  gpio: make library immune to error pointers
  gpio: make sure gpiod_to_irq() returns negative on NULL desc
  gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock

Pull drm fixes from Dave Airlie:
 "This is the drm fixes tree for 4.7-rc5.

  It's a bit larger than normal, due to fixes for production AMD Polaris
  GPUs.  We only merged support for these in 4.7-rc1 so it would be good
  if we got all the fixes into final.  The changes don't hit any other
  hardware.

  Other than the amdgpu Polaris changes:

   - A single fix for atomic modesetting WARN
   - Nouveau fix for when fbdev is disabled
   - i915 fixes for FBC on Haswell and displayport regression
   - Exynos fix for a display panel regression and some other minor changes
   - Atmel fixes for scaling and OF graph interaction
   - Allwiinner build, warning and probing fixes
   - AMD GPU non-polaris fix for num_rbs and some minor fixes

  Also I've just moved house, and my new place is Internet challenged
  due to incompetent incumbent ISPs, hopefully sorted out in a couple of
  weeks, so I might not be too responsive over the next while.  It also
  helps Daniel is on holidays for those couple of weeks as well"

* tag 'drm-fixes-for-v4.7-rc5' of git://people.freedesktop.org/~airlied/linux: (38 commits)
  drm/atomic: Make drm_atomic_legacy_backoff reset crtc->acquire_ctx
  drm/nouveau: fix for disabled fbdev emulation
  drm/i915/fbc: Disable on HSW by default for now
  drm/i915: Revert DisplayPort fast link training feature
  drm/amd/powerplay: enable clock stretch feature for polaris
  drm/amdgpu/gfx8: update golden setting for polaris10
  drm/amd/powerplay: enable avfs feature for polaris
  drm/amdgpu/atombios: add avfs struct for Polaris10/11
  drm/amd/powerplay: add avfs related define for polaris
  drm/amd/powrplay: enable stutter_mode for polaris.
  drm/amd/powerplay: disable UVD SMU handshake for MCLK.
  drm/amd/powerplay: initialize variables which were missed.
  drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
  drm/amd/powerplay: need to notify system bios pcie device ready
  drm/amd/powerplay: fix bug that function parameter was incorect.
  drm/amd/powerplay: fix logic error.
  drm: atmel-hlcdc: Fix OF graph parsing
  drm: atmel-hlcdc: actually disable scaling when no scaling is required
  drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
  drm/amdgpu: precedence bug in amdgpu_device_init()
  ...

Pull PCI fix from Bjorn Helgaas:
 "Here's a small fix for v4.7.  This problem was actually introduced in
  v4.6 when we unified Kconfig, making PCIe support available everywhere
  including sparc, where config reads into unaligned buffers cause
  warnings.  This fix is from Dave Miller.

  As a reminder, any future PCI fixes for v4.7 will probably come from
  Alex Williamson, since I'll be on vacation for most of the rest of
  this cycle.  I should be back about the time the merge window opens"

* tag 'pci-v4.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Fix unaligned accesses in VC code

Atomic updates may acquire more state than initially locked through
drm_modeset_lock_crtc, running with heavy stress can cause a
WARN_ON(crtc->acquire_ctx) in drm_modeset_lock_crtc:

[  601.491296] ------------[ cut here ]------------
[  601.491366] WARNING: CPU: 0 PID: 2411 at
drivers/gpu/drm/drm_modeset_lock.c:191 drm_modeset_lock_crtc+0xeb/0xf0 [drm]
[  601.491369] Modules linked in: drm i915 drm_kms_helper
[  601.491414] CPU: 0 PID: 2411 Comm: kms_cursor_lega Tainted: G     U 4.7.0-rc4-patser+ #4798
[  601.491417] Hardware name: Intel Corporation Skylake Client
[  601.491420]  0000000000000000 ffff88044d153c98 ffffffff812ead28 0000000000000000
[  601.491425]  0000000000000000 ffff88044d153cd8 ffffffff810868e6 000000bf58058030
[  601.491431]  ffff880088b415e8 ffff880458058030 ffff88008a271548 ffff88008a271568
[  601.491436] Call Trace:
[  601.491443]  [<ffffffff812ead28>] dump_stack+0x4d/0x65
[  601.491447]  [<ffffffff810868e6>] __warn+0xc6/0xe0
[  601.491452]  [<ffffffff81086968>] warn_slowpath_null+0x18/0x20
[  601.491472]  [<ffffffffc00d4ffb>] drm_modeset_lock_crtc+0xeb/0xf0 [drm]
[  601.491491]  [<ffffffffc00c5526>] drm_mode_cursor_common+0x66/0x180 [drm]
[  601.491509]  [<ffffffffc00c91cc>] drm_mode_cursor_ioctl+0x3c/0x40 [drm]
[  601.491524]  [<ffffffffc00bc94d>] drm_ioctl+0x14d/0x530 [drm]
[  601.491540]  [<ffffffffc00c9190>] ? drm_mode_setcrtc+0x520/0x520 [drm]
[  601.491545]  [<ffffffff81176aeb>] ? handle_mm_fault+0x106b/0x1430
[  601.491550]  [<ffffffff81108441>] ? stop_one_cpu+0x61/0x70
[  601.491556]  [<ffffffff811bb71d>] do_vfs_ioctl+0x8d/0x570
[  601.491560]  [<ffffffff81290d7e>] ? security_file_ioctl+0x3e/0x60
[  601.491565]  [<ffffffff811bbc74>] SyS_ioctl+0x74/0x80
[  601.491571]  [<ffffffff810e321c>] ? posix_get_monotonic_raw+0xc/0x10
[  601.491576]  [<ffffffff8175b11b>] entry_SYSCALL_64_fastpath+0x13/0x8f
[  601.491581] ---[ end trace 56f3d3d85f000d00 ]---

For good measure, test mode_config.acquire_ctx too, although this should
never happen.

Testcase: kms_cursor_legacy
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

A bit bigger than I would normally like, but most of the large changes are
for polaris support and since polaris went upstream in 4.7, I'd like
to get the fixes in so it's in good shape when the hw becomes available.
The major changes only touch the polaris code so there is little chance
for regressions on other asics.  The rest are just the usual collection
of bug fixes.

* 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: enable clock stretch feature for polaris
  drm/amdgpu/gfx8: update golden setting for polaris10
  drm/amd/powerplay: enable avfs feature for polaris
  drm/amdgpu/atombios: add avfs struct for Polaris10/11
  drm/amd/powerplay: add avfs related define for polaris
  drm/amd/powrplay: enable stutter_mode for polaris.
  drm/amd/powerplay: disable UVD SMU handshake for MCLK.
  drm/amd/powerplay: initialize variables which were missed.
  drm/amd/powerplay: enable PowerContainment feature for polaris10/11.
  drm/amd/powerplay: need to notify system bios pcie device ready
  drm/amd/powerplay: fix bug that function parameter was incorect.
  drm/amd/powerplay: fix logic error.
  drm/amdgpu: initialize amdgpu_cgs_acpi_eval_object result value
  drm/amdgpu: precedence bug in amdgpu_device_init()
  drm/amdgpu: fix num_rbs exposed to userspace (v2)
  drm/amdgpu: missing bounds check in amdgpu_set_pp_force_state()

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

Since HW trigger mode was suppoted we have faced with a issue
that Display panel didn't work correctly when trigger mode was changed
in booting time.
For this, we keep trigger mode with SW trigger mode in default mode
like we did before.

However, we will need to consider PSR(Panel Self Reflash) mode to resolve
this issue fundamentally later.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: use logical AND in exynos_drm_plane_check_size()
  drm/exynos: remove superfluous inclusions of fbdev header
  drm/exynos: g2d: drop the _REG postfix from the stride defines
  drm/exynos: don't use HW trigger for Exynos5420/5422/5800
  drm/exynos: fimd: don't set .has_hw_trigger in s3c6400 driver data
  drm/exynos: dp: Fix NULL pointer dereference due uninitialized connector

Two bug fixes for the atmel-hlcdc driver.

* tag 'drm-atmel-hlcdc-fixes/for-4.7-rc5' of github.com:bbrezillon/linux-at91:
  drm: atmel-hlcdc: Fix OF graph parsing
  drm: atmel-hlcdc: actually disable scaling when no scaling is required

Merge tag 'sunxi-drm-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into drm-fixes

Allwinner sun4i DRM driver fixes

A bunch of fixes that address:
  - Compilation errors in various corner cases
  - Move to helpers
  - Fix the pixel clock computation
  - Fix our panel probe

* tag 'sunxi-drm-fixes-for-4.7' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  drm: sun4i: do cleanup if RGB output init fails
  drm/sun4i: Convert to connector register helpers
  drm/sun4i: remove simplefb at probe
  drm/sun4i: rgb: panel is an error pointer
  drm/sun4i: defer only if we didn't find our panel
  drm/sun4i: rgb: Validate the clock rate
  drm/sun4i: request exact rates to our parents
  drm: sun4i: fix probe error handling
  drm: sun4i: print DMA address correctly
  drm/sun4i: add COMMON_CLK dependency

 Hi Dave, just a couple of display fixes, both stable stuff. Maybe we'll
be able to enable fbc by default one day.

* tag 'drm-intel-fixes-2016-06-22' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/fbc: Disable on HSW by default for now
  drm/i915: Revert DisplayPort fast link training feature

* 'linux-4.7' of git://github.com/skeggsb/linux:
  drm/nouveau: fix for disabled fbdev emulation

Hello,

after this commit:

commit f045f459
Author: Ben Skeggs <bskeggs@redhat.com>
Date:   Thu Jun 2 12:23:31 2016 +1000
    drm/nouveau/fbcon: fix out-of-bounds memory accesses

kernel started to oops when loading nouveau module when using GTX 780 Ti
video adapter. This patch fixes the problem.

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591Signed-off-by: Dmitrii Tcvetkov <demfloro@demfloro.ru>
Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
Fixes: f045f459 ("nouveau_fbcon_init()")
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

None of the code actually wants a thread_info, it all wants a
task_struct, and it's just converting to a thread_info pointer much too
early.

No semantic change.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

None of the code actually wants a thread_info, it all wants a
task_struct, and it's just converting back and forth between the two
("ti->task" to get the task_struct from the thread_info, and
"task_thread_info(task)" to go the other way).

No semantic change.
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During page migrations UBIFS might get confused
and the following assert triggers:
[  213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436)
[  213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008
[  213.490000] Hardware name: Allwinner sun4i/sun5i Families
[  213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14)
[  213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0)
[  213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50)
[  213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8)
[  213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290)
[  213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80)
[  213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0)
[  213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4)
[  213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0)
[  213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8)
[  213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274)
[  213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c)
[  213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0)
[  213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8)
[  213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48)
[  213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444)
[  213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614)
[  213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c)
[  213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34)

UBIFS is using PagePrivate() which can have different meanings across
filesystems. Therefore the generic page migration code cannot handle this
case correctly.
We have to implement our own migration function which basically does a
plain copy but also duplicates the page private flag.
UBIFS is not a block device filesystem and cannot use buffer_migrate_page().

Cc: stable@vger.kernel.org
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[rw: Massaged changelog, build fixes, etc...]
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>

Export these symbols such that UBIFS can implement
->migratepage.

Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Christoph Hellwig <hch@lst.de>

recover_peb() was never power cut aware,
if a power cut happened right after writing the VID header
upon next attach UBI would blindly use the new partial written
PEB and all data from the old PEB is lost.

In order to make recover_peb() power cut aware, write the new
VID with a proper crc and copy_flag set such that the UBI attach
process will detect whether the new PEB is completely written
or not.
We cannot directly use ubi_eba_atomic_leb_change() since we'd
have to unlock the LEB which is facing a write error.

Cc: stable@vger.kernel.org
Reported-by: Jörg Pfähler <pfaehler@isse.de>
Reviewed-by: Jörg Pfähler <pfaehler@isse.de>
Signed-off-by: Richard Weinberger <richard@nod.at>

Most functions that take a GPIO descriptor in need to check the
descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC()
macro except for the gpiod_to_irq() function which needs special
handling.

Cc: stable@vger.kernel.org
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

commit 54d77198
("gpio: bail out silently on NULL descriptors")
doesn't work for gpiod_to_irq(): drivers assume that NULL
descriptors will give negative IRQ numbers in return.

It has been pointed out that returning 0 is NO_IRQ and that
drivers should be amended to treat this as an error, but that
is for the longer term: now let us repair the semantics.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Fixes: 9ae48210 ("gpio: 104-idi-48: Clear pending interrupt once in IRQ handler")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull userns fix from Eric Biederman:
 "This contains just a single small patch that fixes a tiny hole in the
  logic of allowing unprivileged mounting of proc and sysfs.

  In practice I don't think anyone is affected because having MNT_RDONLY
  clear in mnt->mnt_flags but MS_RDONLY set in sb->s_flags is very weird
  for a filesystem, and weirder for proc and sysfs.  However if it
  happens let's handle it correctly and then no one has to to worry
  about this crazy case"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: Account for MS_RDONLY in fs_fully_visible

Pull GPIO fixes from Linus Walleij:
 "More GPIO fixes.  Most prominent the gpiod_to_irq() fix brought to my
  attention by Hans de Goede.  The hardening patch is a consequence of
  the reasoning around that bug.

   - It was discovered that too many parts of the kernel does not
     respect gpiod_to_irq() returning zero for an invalid IRQ.  While
     this gets fixed, we need to make it return negative errorcodes
     again.

   - Harden the library a bit when passed error pointers.  It is a bug
     to use these, but let's be helpful and warn the users.

   - Fix an uninitialized spinlock in the 104-idi-48 driver"

* tag 'gpio-v4.7-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: make library immune to error pointers
  gpio: make sure gpiod_to_irq() returns negative on NULL desc
  gpio: 104-idi-48: Fix missing spin_lock_init for ack_lock

>From https://bugs.freedesktop.org/show_bug.cgi?id=96461 :

This was kind of a difficult bug to track down. If you're using a
Haswell system running GNOME and you have fbc completely enabled and
working, playing videos can result in video artifacts. Steps to
reproduce:

- Run GNOME
- Ensure FBC is enabled and active
- Download a movie, I used the ogg version of Big Buck Bunny for this
- Run `gst-launch-1.0 filesrc location='some_movie.ogg' ! decodebin !
  glimagesink` in a terminal
- Watch for about over a minute, you'll see small horizontal lines go
  down the screen.

For the time being, disable FBC for Haswell by default.

Stefan Richter reported kernel freezes (no video artifacts) when fbc
is on.  (E3-1245 v3 with HD P4600; openbox and some KDE and LXDE
applications, thread begins at https://lkml.org/lkml/2016/4/26/813).
We also got reports from Steven Honeyman on openbox+roxterm.

v2 (From Paulo):
  - Add extra information to the commit message
  - Add Fixes tag
  - Rebase

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96461
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96464
Fixes: a98ee793 ("drm/i915/fbc: enable FBC by default on HSW and BDW")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465487895-7401-1-git-send-email-cpaul@redhat.com
(cherry picked from commit c7f7e2fe)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

It has been found out that in some HW combination the DisplayPort
fast link training feature caused screen flickering. Let's revert
this feature for now until we can ensure that the feature works for
all platforms.

This is a manual revert of commits 5fa836a9 ("drm/i915: DP link
training optimization") and 4e96c977 ("drm/i915: eDP link training
optimization").

Fixes: 5fa836a9 ("drm/i915: DP link training optimization")
Fixes: 4e96c977 ("drm/i915: eDP link training optimization")
Cc: <stable@vger.kernel.org> # v4.2+

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91393Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466410226-19543-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 91df09d9)

Power saving feature which reduces the amount of
voltage needed for specific engine clocks.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

avfs feature is for voltage control based on
gpu system clock on polaris10
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To minimize the dram power expenditure during static -screen
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

sync up with internal programming recommendations.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>