- 11 Mar, 2023 28 commits
-
-
William Breathitt Gray authored
This driver supports the CIO-DAC08 device and not "CIO-DAC06". Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311002434.8761-1-william.gray@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/iio/adc/rcar-gyroadc.c:286:34: error: ‘rcar_gyroadc_child_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230311111457.251475-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marco Felsch authored
Align the code correctly if possible and align the channel bit mask to make it easier to read. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-6-m.felsch@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marco Felsch authored
The TMP116 is the predecessor of the TMP117. The TMP116 don't support custom offset calibration data, instead this register is used as generic EEPROM storage as well. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-5-m.felsch@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marco Felsch authored
The TMP116 is the predecessor of the TMP117. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230228090518.529811-4-m.felsch@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marco Felsch authored
Don't error if the device-id found don't match the device-id for the TMP117 sensor since other TMPxxx might be compatible to the TMP117. The fallback mechanism tries to gather the required information from the of_device_id or from the i2c_client information. The commit also prepares the driver for adding new devices more easily by making use of switch-case at the relevant parts. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20230228090518.529811-3-m.felsch@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marco Felsch authored
Fix the broken link to point to the correct homepage. Fixes: 5e713b25 ("dt-bindings: iio: temperature: Add DT bindings for TMP117") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230228090518.529811-2-m.felsch@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Mehdi Djait authored
Rename the function to iio_trigger_poll_nested. Add kernel-doc with a note on the context where the function is expected to be called. Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com> Link: https://lore.kernel.org/r/841b533cba28ca25a8e87280c44e45979166e8e2.1677761379.git.mehdi.djait.k@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Mehdi Djait authored
Move the kernel-doc of the function to industrialio-trigger.c Add a note on the context where the function is expected to be called. Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/bd84fc17e9d22eab998bf48720297f9a77689f45.1677761379.git.mehdi.djait.k@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lorenzo Bianconi authored
During digital filters settling time the driver is expected to drop samples since they can be corrupted. Introduce the capability to drop a given number of samples according to the configured ODR. Add sample_to_discard for LSM6DSM-like sensors since new generation devices (e.g. LSM6DSO) support DRDY mask where corrupted samples are masked in hw with values greather than 0x7ffd so the driver can easily discard them. I have not added sample_to_discard support for LSM6DS3 or LSM6DS3H since I do not have any sample for testing at the moment. Reported-by: Philippe De Muyter <phdm@macqel.be> Tested-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/21dcd94935c147ef9b1da4984b3da6264ee9609e.1677496295.git.lorenzo@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
The pressure sensor BMP580 contains a non-volatile memory that stores trimming and configuration params. That memory provides an programmable user range of three 2-byte words. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Link: https://lore.kernel.org/r/f3f453d9b2c0f7820ca9c56e24e2165b6c39bb67.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
Add bosch,bmp580 to compatible string for the new family of sensors. This family includes the BMP580 and BMP581 sensors. The register map in this family presents significant departures from previous generations. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/2510dccfd44e2225c5978bfdf4136f423326c31a.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
Adds compatibility with the new sensor generation, the BMP580. The measurement and initialization codepaths are adapted from the device datasheet and the repository from manufacturer at https://github.com/boschsensortec/BMP5-Sensor-API. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/f899fceec9b48bc173bd4b7555f0a237fa32d520.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
Title entry for BMP280 called the driver an I2C implementation, when the driver supports both I2C and SPI. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/d26fe292164ca80685f080101122b5beb564d7db.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
Newer models do not require read the calibration parameters and apply the compensation algorithms in the sensor. Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/bb1b95ab3f4e71d3c76543370325c5c9aaa07add.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
Adds preinit callback to execute operations on probe before applying initial configuration. Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/fa9513ffad37a6a43b6d46df9d8319ccab6f5870.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Angel Iglesias authored
Refactor driver I2C and SPI implementations using pointers for each variant's chip_info as the driver data. Adds the regmap configuration to the chip_info struct. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/a48cfa756be48d61dbf656c65daff6e9a1290e6f.1676823250.git.ang.iglesiasg@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Uwe Kleine-König authored
meson_sar_adc_lock() might return an error if BL30 doesn't release its lock on the hardware. Just returning early from .remove() is wrong however as this keeps the clocks and regulators on which is never cleaned up later. Given the BL30 not giving up its lock is a strong hint for broken behaviour, and there is nothing we can do about that: Just clean up ignoring the fact that we're not holding the lock. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20230219204439.1641640-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Aidan MacDonald authored
The adc_en2 flag is essentially specific to axp20x-compatible devices because it hardcodes register values. Replace it with a mask field so the register value can be specified in device match data. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230217153404.32481-2-aidanmacdonald.0x0@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Aidan MacDonald authored
The code may be clearer if parameters are not re-purposed to hold temporary results like register values, so introduce local variables as necessary to avoid that. Regroup macros based on chip type, and use the FIELD_PREP() macro instead of a hand-rolled version. Suggested-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Link: https://lore.kernel.org/r/20230217153404.32481-1-aidanmacdonald.0x0@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Nuno Sá authored
The minimal advised lower rate for adis16475 compatible devices is 1900HZ and not 4000HZ. Set that right in the comments so that it does not generate any confusion. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20230213153208.1027602-1-nuno.sa@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Gwendal Grignou authored
Older firmwares still send sensor configuration using a list of registers with opaque values defined during sensor tuning. sx9234 and sx9360 sensor on ACPI based devices are concerned. More schema to configure the sensors will be needed to support devices designed for windows, like Samsung Galaxy Book2. Support schema is: "<_HID>.<register_name>". For instance "STH9324,reg_adv_ctrl2" in: Scope (\_SB.PCI0.I2C2) { Device (SX28) { Name (_HID, "STH9324") // _HID: Hardware ID ... Name (_DSD, Package (0x02) // _DSD: Device-Specific Data { ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */, Package (0x3F) { ... Package (0x02) { "STH9324,reg_adv_ctrl2", Zero },` Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230211002421.3447060-1-gwendal@chromium.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Jonathan Cameron authored
This driver is so far from making correct use of the IIO infrastructure and ABI that if someone wanted to make the driver suitable for moving out of staging, they would more or less be starting from scratch. As such there is little point in keeping the existing code in staging. Note this was only user of the meter.h header so that is dropped. There are no other drivers in the staging/iio/meter directory so drop the build system files as well. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230129160805.747745-1-jic23@kernel.org
-
Jonathan Cameron authored
struct sx_common_data doesn't have a num_default_regs element so drop the documentation for it. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20230114172928.80414-1-jic23@kernel.orgSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Antoniu Miclaus authored
Add array of explicit gpio names for the `gpiochip` structure of ad5592r, mainly for debug purposes. Since the gpios are configurable via the dts, generic names are used. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Link: https://lore.kernel.org/r/20221117090130.51702-1-antoniu.miclaus@analog.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Geert Uytterhoeven authored
Set limits on the number of power-domains and resets, and make them required. Simplify the example, and update it to match reality: - Convert from obsolete MSTP to CPG/MSSR bindings, - Examples should use #{address,size}-cells = <1>, - Add missing resets property, - Drop soc container and pinctrl properties, which are not needed in examples. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/7b7a13680fa24282c3407e12b5943a66a2ed9068.1666611184.git.geert+renesas@glider.beSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Mehdi Djait authored
The g_range member of the driver data struct is not used and should therefore be removed. Signed-off-by: Mehdi Djait <mehdi.djait.k@gmail.com> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/e884d53fed0d8322d8be1de2593d4f5f8975af9c.1674996464.git.mehdi.djait.k@gmail.comSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Jonathan Neuschäfer authored
It's easier to see the (lack of) difference between the lines when they are visually aligned. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20230129132020.1352368-1-j.neuschaefer@gmx.netSigned-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 05 Mar, 2023 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Commit aa47a7c2 ("lib/cpumask: deprecate nr_cpumask_bits") resulted in the cpumask operations potentially becoming hugely less efficient, because suddenly the cpumask was always considered to be variable-sized. The optimization was then later added back in a limited form by commit 6f9c07be ("lib/cpumask: add FORCE_NR_CPUS config option"), but that FORCE_NR_CPUS option is not useful in a generic kernel and more of a special case for embedded situations with fixed hardware. Instead, just re-introduce the optimization, with some changes. Instead of depending on CPUMASK_OFFSTACK being false, and then always using the full constant cpumask width, this introduces three different cpumask "sizes": - the exact size (nr_cpumask_bits) remains identical to nr_cpu_ids. This is used for situations where we should use the exact size. - the "small" size (small_cpumask_bits) is the NR_CPUS constant if it fits in a single word and the bitmap operations thus end up able to trigger the "small_const_nbits()" optimizations. This is used for the operations that have optimized single-word cases that get inlined, notably the bit find and scanning functions. - the "large" size (large_cpumask_bits) is the NR_CPUS constant if it is an sufficiently small constant that makes simple "copy" and "clear" operations more efficient. This is arbitrarily set at four words or less. As a an example of this situation, without this fixed size optimization, cpumask_clear() will generate code like movl nr_cpu_ids(%rip), %edx addq $63, %rdx shrq $3, %rdx andl $-8, %edx callq memset@PLT on x86-64, because it would calculate the "exact" number of longwords that need to be cleared. In contrast, with this patch, using a MAX_CPU of 64 (which is quite a reasonable value to use), the above becomes a single movq $0,cpumask instruction instead, because instead of caring to figure out exactly how many CPU's the system has, it just knows that the cpumask will be a single word and can just clear it all. Note that this does end up tightening the rules a bit from the original version in another way: operations that set bits in the cpumask are now limited to the actual nr_cpu_ids limit, whereas we used to do the nr_cpumask_bits thing almost everywhere in the cpumask code. But if you just clear bits, or scan for bits, we can use the simpler compile-time constants. In the process, remove 'cpumask_complement()' and 'for_each_cpu_not()' which were not useful, and which fundamentally have to be limited to 'nr_cpu_ids'. Better remove them now than have somebody introduce use of them later. Of course, on x86-64 with MAXSMP there is no sane small compile-time constant for the cpumask sizes, and we end up using the actual CPU bits, and will generate the above kind of horrors regardless. Please don't use MAXSMP unless you really expect to have machines with thousands of cores. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the caam driver" * tag 'v6.3-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: caam - Fix edesc/iv ordering mixup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 updates from Thomas Gleixner: "A small set of updates for x86: - Return -EIO instead of success when the certificate buffer for SEV guests is not large enough - Allow STIPB to be enabled with legacy IBSR. Legacy IBRS is cleared on return to userspace for performance reasons, but the leaves user space vulnerable to cross-thread attacks which STIBP prevents. Update the documentation accordingly" * tag 'x86-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt/sev-guest: Return -EIO if certificate buffer is not large enough Documentation/hw-vuln: Document the interaction between IBRS and STIBP x86/speculation: Allow enabling STIBP with legacy IBRS
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "A set of updates for the interrupt susbsystem: - Prevent possible NULL pointer derefences in irq_data_get_affinity_mask() and irq_domain_create_hierarchy() - Take the per device MSI lock before invoking code which relies on it being hold - Make sure that MSI descriptors are unreferenced before freeing them. This was overlooked when the platform MSI code was converted to use core infrastructure and results in a fals positive warning - Remove dead code in the MSI subsystem - Clarify the documentation for pci_msix_free_irq() - More kobj_type constification" * tag 'irq-urgent-2023-03-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, platform-msi: Ensure that MSI descriptors are unreferenced genirq/msi: Drop dead domain name assignment irqdomain: Add missing NULL pointer check in irq_domain_create_hierarchy() genirq/irqdesc: Make kobj_type structures constant PCI/MSI: Clarify usage of pci_msix_free_irq() genirq/msi: Take the per-device MSI lock before validating the control structure genirq/ipi: Fix NULL pointer deref in irq_data_get_affinity_mask()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs update from Al Viro: "Adding Christian Brauner as VFS co-maintainer" * tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Adding VFS co-maintainer
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull VM_FAULT_RETRY fixes from Al Viro: "Some of the page fault handlers do not deal with the following case correctly: - handle_mm_fault() has returned VM_FAULT_RETRY - there is a pending fatal signal - fault had happened in kernel mode Correct action in such case is not "return unconditionally" - fatal signals are handled only upon return to userland and something like copy_to_user() would end up retrying the faulting instruction and triggering the same fault again and again. What we need to do in such case is to make the caller to treat that as failed uaccess attempt - handle exception if there is an exception handler for faulting instruction or oops if there isn't one. Over the years some architectures had been fixed and now are handling that case properly; some still do not. This series should fix the remaining ones. Status: - m68k, riscv, hexagon, parisc: tested/acked by maintainers. - alpha, sparc32, sparc64: tested locally - bug has been reproduced on the unpatched kernel and verified to be fixed by this series. - ia64, microblaze, nios2, openrisc: build, but otherwise completely untested" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: openrisc: fix livelock in uaccess nios2: fix livelock in uaccess microblaze: fix livelock in uaccess ia64: fix livelock in uaccess sparc: fix livelock in uaccess alpha: fix livelock in uaccess parisc: fix livelock in uaccess hexagon: fix livelock in uaccess riscv: fix livelock in uaccess m68k: fix livelock in uaccess
-
Masahiro Yamada authored
include/linux/compiler-intel.h had no update in the past 3 years. We often forget about the third C compiler to build the kernel. For example, commit a0a12c3e ("asm goto: eradicate CC_HAS_ASM_GOTO") only mentioned GCC and Clang. init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC, and nobody has reported any issue. I guess the Intel Compiler support is broken, and nobody is caring about it. Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is deprecated: $ icc -v icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is deprecated and will be removed from product release in the second half of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended compiler moving forward. Please transition to use this compiler. Use '-diag-disable=10441' to disable this message. icc version 2021.7.0 (gcc version 12.1.0 compatibility) Arnd Bergmann provided a link to the article, "Intel C/C++ compilers complete adoption of LLVM". lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept untouched for better sync with https://github.com/facebook/zstd Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.htmlSigned-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Al Viro authored
Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 04 Mar, 2023 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull more i2c updates from Wolfram Sang: "Some improvements/fixes for the newly added GXP driver and a Kconfig dependency fix" * tag 'i2c-for-6.3-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: gxp: fix an error code in probe i2c: gxp: return proper error on address NACK i2c: gxp: remove "empty" switch statement i2c: Disable I2C_APPLE when I2C_PASEMI is a builtin
-
Linus Torvalds authored
The migration code ends up temporarily stashing information of the wrong type in unused fields of the newly allocated destination folio. That all works fine, but gcc does complain about the pointer type mis-use: mm/migrate.c: In function ‘__migrate_folio_extract’: mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’ 1050 | *anon_vmap = (void *)dst->mapping; | ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~ and gcc is actually right to complain since it really doesn't understand that this is a very temporary special case where this is ok. This could be fixed in different ways by just obfuscating the assignment sufficiently that gcc doesn't see what is going on, but the truly "proper C" way to do this is by explicitly using a union. Using unions for type conversions like this is normally hugely ugly and syntactically nasty, but this really is one of the few cases where we want to make it clear that we're not doing type conversion, we're really re-using the value bit-for-bit just using another type. IOW, this should not become a common pattern, but in this one case using that odd union is probably the best way to document to the compiler what is conceptually going on here. [ Side note: there are valid cases where we convert pointers to other pointer types, notably the whole "folio vs page" situation, where the types actually have fundamental commonalities. The fact that the gcc note is limited to just randomized structures means that we don't see equivalent warnings for those cases, but it migth also mean that we miss other cases where we do play these kinds of dodgy games, and this kind of explicit conversion might be a good idea. ] I verified that at least for an allmodconfig build on x86-64, this generates the exact same code, apart from line numbers and assembler comment changes. Fixes: 64c8902e ("migrate_pages: split unmap_and_move() to _unmap() and _move()") Cc: Huang, Ying <ying.huang@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "17 hotfixes. Eight are for MM and seven are for other parts of the kernel. Seven are cc:stable and eight address post-6.3 issues or were judged unsuitable for -stable backporting" * tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: map Dikshita Agarwal's old address to his current one mailmap: map Vikash Garodia's old address to his current one fs/cramfs/inode.c: initialize file_ra_state fs: hfsplus: fix UAF issue in hfsplus_put_super panic: fix the panic_print NMI backtrace setting lib: parser: update documentation for match_NUMBER functions kasan, x86: don't rename memintrinsics in uninstrumented files kasan: test: fix test for new meminstrinsic instrumentation kasan: treat meminstrinsic as builtins in uninstrumented files kasan: emit different calls for instrumentable memintrinsics ocfs2: fix non-auto defrag path not working issue ocfs2: fix defrag path triggering jbd2 ASSERT mailmap: map Georgi Djakov's old Linaro address to his current one mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH mm/damon/paddr: fix missing folio_put() mm/mremap: fix dup_anon_vma() in vma_merge() case 4
-