- 28 Feb, 2024 1 commit
-
-
Varshini Rajendran authored
Remove microchip,sam9x60-spi compatible from the list as the driver used has the compatible atmel,at91rm9200-spi and sam9x60 devices also use the same compatible as fallback. So removing the microchip,sam9x60-spi compatible from the list since it is not needed. Signed-off-by:
Varshini Rajendran <varshini.rajendran@microchip.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@linaro.org> Link: https://msgid.link/r/20240223172638.672366-1-varshini.rajendran@microchip.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 27 Feb, 2024 1 commit
-
-
Uwe Kleine-König authored
I failed to adapt this driver because it's not enabled in a powerpc allmodconfig build and also wasn't hit by my grep expertise. Fix accordingly. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402100815.XQXw9XCF-lkp@intel.com/ Fixes: 22592331 ("spi: bitbang: Follow renaming of SPI "master" to "controller"") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://msgid.link/r/20240210164006.208149-7-u.kleine-koenig@pengutronix.deSigned-off-by:
-
- 26 Feb, 2024 6 commits
-
-
Mark Brown authored
Merge series from David Lechner <dlechner@baylibre.com>: This is a follow-up to [1] where it was suggested to break down the proposed SPI offload support into smaller series. This takes on the first suggested task of introducing an API to "pre-cook" SPI messages. This idea was first discussed extensively in 2013 [2][3] and revisited more briefly 2022 [4]. The goal here is to be able to improve performance (higher throughput, and reduced CPU usage) by allowing peripheral drivers that use the same struct spi_message repeatedly to "pre-cook" the message once to avoid repeating the same validation, and possibly other operations each time the message is sent. This series includes __spi_validate() and the automatic splitting of xfers in the optimizations. Another frequently suggested optimization is doing DMA mapping only once. This is not included in this series, but can be added later (preferably by someone with a real use case for it). To show how this all works and get some real-world measurements, this series includes the core changes, optimization of a SPI controller driver, and optimization of an ADC driver. This test case was only able to take advantage of the single validation optimization, since it didn't require splitting transfers. With these changes, CPU usage of the threaded interrupt handler, which calls spi_sync(), was reduced from 83% to 73% while at the same time the sample rate (frequency of SPI xfers) was increased from 20kHz to 25kHz. [1]: https://lore.kernel.org/linux-spi/20240109-axi-spi-engine-series-3-v1-1-e42c6a986580@baylibre.com/T/ [2]: https://lore.kernel.org/linux-spi/E81F4810-48DD-41EE-B110-D0D848B8A510@martin.sperl.org/T/ [3]: https://lore.kernel.org/linux-spi/39DEC004-10A1-47EF-9D77-276188D2580C@martin.sperl.org/T/ [4]: https://lore.kernel.org/linux-spi/20220525163946.48ea40c9@erd992/T/
-
Théo Lebrun authored
Current behavior is that spi-mem operations do not increment statistics, neither per-controller nor per-device, if ->exec_op() is used. For operations that do NOT use ->exec_op(), stats are increased as the usual spi_sync() is called. The newly implemented spi_mem_add_op_stats() function is strongly inspired by spi_statistics_add_transfer_stats(); locking logic and l2len computation comes from there. Statistics that are being filled: bytes{,_rx,_tx}, messages, transfers, errors, timedout, transfer_bytes_histo_*. Note about messages & transfers counters: in the fallback to spi_sync() case, there are from 1 to 4 transfers per message. We only register one big transfer in the ->exec_op() case as that is closer to reality. This patch is NOT touching: - spi_async, spi_sync, spi_sync_immediate: those counters describe precise function calls, incrementing them would be lying. I believe comparing the messages counter to spi_async+spi_sync is a good way to detect ->exec_op() calls, but I might be missing edge cases knowledge. - transfers_split_maxsize: splitting cannot happen if ->exec_op() is provided. Reviewed-by:Dhruva Gole <d-gole@ti.com> Signed-off-by:
Théo Lebrun <theo.lebrun@bootlin.com> Reviewed-by:
-
David Lechner authored
In the AXI SPI Engine driver, compiling the message is an expensive operation. Previously, it was done per message transfer in the prepare_message hook. This patch moves the message compile to the optimize_message hook so that it is only done once per message in cases where the peripheral driver calls spi_optimize_message(). This can be a significant performance improvement for some peripherals. For example, the ad7380 driver saw a 13% improvement in throughput when using the AXI SPI Engine driver with this patch. Since we now need two message states, one for the optimization stage that doesn't change for the lifetime of the message and one that is reset on each transfer for managing the current transfer state, the old msg->state is split into msg->opt_state and spi_engine->msg_state. The latter is included in the driver struct now since there is only one current message at a time that can ever use it and it is in a hot path so avoiding allocating a new one on each message transfer saves a few cpu cycles and lets us get rid of the prepare_message callback. Signed-off-by:
David Lechner <dlechner@baylibre.com> Link: https://msgid.link/r/20240219-mainline-spi-precook-message-v2-4-4a762c6701b9@baylibre.comReviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
David Lechner authored
Since splitting transfers was moved to spi_optimize_message() in the core SPI code, we now need to use the optimize_message callback in the STM32 SPI driver to ensure that the operation is only performed once when spi_optimize_message() is used by peripheral drivers explicitly. Signed-off-by:
-
David Lechner authored
Splitting transfers is an expensive operation so we can potentially optimize it by doing it only once per optimization of the message instead of repeating each time the message is transferred. The transfer splitting functions are currently the only user of spi_res_alloc() so spi_res_release() can be safely moved at this time from spi_finalize_current_message() to spi_unoptimize_message(). The doc comments of the public functions for splitting transfers are also updated so that callers will know when it is safe to call them to ensure proper resource management. Reviewed-by:
-
David Lechner authored
This adds a new spi_optimize_message() function that can be used to optimize SPI messages that are used more than once. Peripheral drivers that use the same message multiple times can use this API to perform SPI message validation and controller-specific optimizations once and then reuse the message while avoiding the overhead of revalidating the message on each spi_(a)sync() call. Internally, the SPI core will also call this function for each message if the peripheral driver did not explicitly call it. This is done to so that controller drivers don't have to have multiple code paths for optimized and non-optimized messages. A hook is provided for controller drivers to perform controller-specific optimizations. Suggested-by:
Martin Sperl <kernel@martin.sperl.org> Link: https://lore.kernel.org/linux-spi/39DEC004-10A1-47EF-9D77-276188D2580C@martin.sperl.org/Signed-off-by:
-
- 21 Feb, 2024 3 commits
-
-
Théo Lebrun authored
Set the ->num_chipselect field in struct cqspi_st and struct spi_controller to the current number of chip-select. The value is dependent on declared flashes in devicetree. Previously, the num-cs property from devicetree or the maximum value was being reported. Signed-off-by:
-
Théo Lebrun authored
Change the maximum chip-select count in cadence-qspi to 4 instead of 16. The value gets used as default ->num_chipselect when the num-cs DT property isn't received from devicetree. It also determines the cqspi->f_pdata array size. Hardware only supports values up to 4; see cqspi_chipselect() that sets CS using a one-bit-per-CS 4-bit register field. Add a static_assert() call as a defensive measure to ensure we stay under the SPI subsystem limit. It got set to 4 when introduced in 4d8ff6b0 ("spi: Add multi-cs memories support in SPI core") and later increased to 16 in 2f8c7c37 ("spi: Raise limit on number of chip selects"). Signed-off-by:
-
Théo Lebrun authored
Check each flash CS against the num-cs property from devicetree. Fallback to the driver max supported value (CQSPI_MAX_CHIPSELECT) if num-cs isn't present. cqspi->num_chipselect is set in cqspi_of_get_pdata() to the num-cs devicetree property, or to CQSPI_MAX_CHIPSELECT if num-cs is not set. Signed-off-by:
-
- 19 Feb, 2024 1 commit
-
-
Randy Dunlap authored
The change to use "target" requires an underline to be extended by one more character to fix a documentation build warning: Documentation/spi/spi-summary.rst:274: WARNING: Title underline too short. Declare target Devices ^^^^^^^^^^^^^^^^^^^^^ Fixes: hash ("spi: Update the "master/slave" terminology in documentation") Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Cc: Dhruva Gole <d-gole@ti.com> Cc: Mark Brown <broonie@kernel.org> Cc: linux-spi@vger.kernel.org Reviewed-by:
-
- 15 Feb, 2024 2 commits
-
-
Dhruva Gole authored
Update the master/slave terminology wherever possible to adopt usage of the controller/host/target. Some parts have been left untouched because they were sysfs entries and will probably end up being inaccurate if simply replaced here. Signed-off-by:
-
Colin Ian King authored
The variable id len being initialized with a value that is never read, it is being re-assigned later on in a for-loop. The initialization is redundant and can be removed. Cleans up clang scan build warning: drivers/spi/spi-dw-dma.c:580:17: warning: Although the value stored to 'len' is used in the enclosing expression, the value is never actually read from 'len' [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Acked-by:
Serge Semin <fancer.lancer@gmail.com> Link: https://msgid.link/r/20240215131603.2062332-1-colin.i.king@gmail.comSigned-off-by:
-
- 13 Feb, 2024 1 commit
-
-
Dan Carpenter authored
Call pci_release_regions(pdev) before returning on this error path. Fixes: 3e7cfd6a ("spi: mchp-pci1xxxx: Add support for DMA in SPI") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://msgid.link/r/efc92197-4023-4bfe-bc63-452e7ed112e8@moroto.mountainSigned-off-by:
-
- 09 Feb, 2024 1 commit
-
-
Andy Shevchenko authored
In commit 8caab75f ("spi: Generalize SPI "master" to "controller"") some functions and struct members were renamed. Recent work by Uwe completes this renaming. However, there are plenty of leftovers in the comments and in-code documentation. Update them as well. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240209165423.2305493-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
- 08 Feb, 2024 24 commits
-
-
Krzysztof Kozlowski authored
Use existing typedef for dma_filter_fn to avoid duplicating type definition. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240208202154.630336-3-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Add kerneldoc for dma_filter field in struct pl022_ssp_controller. Signed-off-by:
-
Krzysztof Kozlowski authored
Use existing typedef for dma_filter_fn to avoid duplicating type definition. Signed-off-by:
-
Mark Brown authored
Merge series from Tudor Ambarus <tudor.ambarus@linaro.org>: Various simple cleanups for the s3c64xx driver. Tested with gs101-spi.
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: This series finishes off the removal of some of the legacy names for SPI controllers and devices.
-
Mark Brown authored
Merge series from Tudor Ambarus <tudor.ambarus@linaro.org>: The Google GCS101 uses a variant of the Samsung SPI controller IP.
-
Thangaraj Samynathan authored
pci1xxxx_spi_transfer_with_dma adds DMA support to copy the data between host cpu buffer and SPI IO Buffer. On DMA Completion interrupt, the next SPI transaction is initiated in isr. Helper functions pci1xxxx_spi_setup, pci1xxxx_spi_setup_dma_from_io, pci1xxxx_spi_setup_dma_to_io and pci1xxxx_start_spi_xfer are added for setting up spi, setting up dma operations, and to start spi transfer respectively. In the existing implementation, codes are replaced with helper functions wherever applicable. Signed-off-by:
Thangaraj Samynathan <thangaraj.s@microchip.com> Link: https://lore.kernel.org/r/20240207080621.30742-3-thangaraj.s@microchip.comSigned-off-by:
-
Thangaraj Samynathan authored
In PCI1xxxx C0, support for DMA in PCIe endpoint is added to enhance the SPI performance. With this support, the performance is improved from 6Mbps to 17Mbps with 20Mhz clock. - DMA Supports two Channels, 0 and 1 - SPI Instance 0 uses chan 0 and SPI Instance 1 uses chan 1 - DMA can be used only if SPI is mapped to PF0 in the multi function endpoint and the MSI interrupt is supported - MSI interrupt of one of the SPI instance is assigned to the DMA and both channels 0 and 1 share the same irq, the MSI address and MSI Data of the irq is obtained and stored in DMA registers to generate interrupt Signed-off-by:
-
Tudor Ambarus authored
Add support for GS101 SPI. GS101 integrates 16 SPI nodes, all with 64 bytes FIFOs. GS101 allows just 32 bit register accesses, otherwise a Serror Interrupt is raised. Do the write reg accesses in 32 bits. Reviewed-by:
Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by:
-
Tudor Ambarus authored
Allow SoCs that require 32 bits register accesses to write data in chunks of 8 or 16 bits. One SoC that requires 32 bit register accesses is the google gs101. The operation is rare, thus open code it in the driver rather than making it generic (through asm-generic/io.h). Signed-off-by:
-
Tudor Ambarus authored
There are SoCs (gs101) that allow only 32 bit register accesses. As the requirement is rare enough, for those SoCs we'll open code in the driver some s3c64xx_iowrite{8,16}_32_rep() accessors. Prepare for such addition. Suggested-by: -
Tudor Ambarus authored
Add "google,gs101-spi" dedicated compatible for representing SPI of Google GS101 SoC. Reviewed-by:
Peter Griffin <peter.griffin@linaro.org> Acked-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
-
Tudor Ambarus authored
val &= ~mask; val |= mask; is equivalent to: val |= mask; Drop the superfluous bitwise NOT operation. Reviewed-by:
-
Tudor Ambarus authored
S3C64XX_SPI_TRAILCNT brings no benefit in terms of name over S3C64XX_SPI_MAX_TRAILCNT. Remove the duplicated definition. Reviewed-by:
-
Tudor Ambarus authored
"samsung,spi-src-clk" and "num-cs" are optional dt properties. Downgrade the message from warning to debug message. Reviewed-by:
-
Tudor Ambarus authored
Drop the blank line and move the logical operation in the body of the function rather than in initialization list. Reviewed-by:
-
Tudor Ambarus authored
ETIMEDOUT is more specific than EIO, use it for wait_for_completion_timeout(). Reviewed-by:
-
Tudor Ambarus authored
Don't monopolize the name. Prepend the driver prefix to the function name. Reviewed-by:
-
Tudor Ambarus authored
DMA submit should just add the dma descriptor to a queue, without firing it. EIO is misleading and hides what happens in DMA. Propagate the dma_submit_error() error code, don't overwrite it. Signed-off-by:
-
Tudor Ambarus authored
Check the return code of dmaengine_slave_config(). Reviewed-by:
-
Tudor Ambarus authored
Move common code outside if else to avoid code duplication. Reviewed-by:
-
Tudor Ambarus authored
Else case is not needed after a return, remove it. Reviewed-by:
-
Tudor Ambarus authored
of_device_id::data is an opaque pointer. No explicit cast is needed. Remove unneeded (void *) casts in of_match_table. Reviewed-by:
-
Tudor Ambarus authored
Fix typo, s/configuartion/configuration. Reviewed-by:
-
