- 27 Jul, 2023 3 commits
-
-
Rafał Miłecki authored
MTD subsystem may return -EPROBE_DEFER if something isn't ready yet. It's important to pass that error up so device will get probed later. Signed-off-by:
Rafał Miłecki <rafal@milecki.pl> Acked-by:
Florian Fainelli <florian.fainelli@broadcom.com> Acked-by:
William Zhang <william.zhang@broadcom.com> Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230719084324.14799-1-zajec5@gmail.com
-
Arseniy Krasnov authored
Meson NAND supports both 512B and 1024B ECC step size. Signed-off-by:
Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by:
-
Arseniy Krasnov authored
ECC properties 'nand-ecc-strength' and 'nand-ecc-step-size' depends on each other, so they must be both either set or not set. In first case ECC core will try to use these values if possible (by checking ECC caps provided by driver), in second case ECC core will select most optimal values for both properties. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Jul, 2023 7 commits
-
-
Arseniy Krasnov authored
Meson NAND supports both 512B and 1024B ECC step size, so replace 'const' for only 1024B step size with enum for both sizes. Signed-off-by:
-
Miquel Raynal authored
Binding files should be dual licensed. This file was initially written as a .txt file with no specific license, so was implicitely GPLv2. Significant part of this file and its conversion into yaml were written by Bootlin employees which agree to comply with the rules regarding the dual licensing so let's fix the SPDX tag to reflect the correct license by changing it from GPL to GPL + BSD-2-Clause. Signed-off-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/linux-mtd/20230712151042.433593-1-miquel.raynal@bootlin.com
-
Chris Packham authored
Add support for the AC5/AC5X SoC from Marvell. The NFC on this SoC only supports SDR modes up to 3. Marvell's SDK includes some predefined values for the ndtr registers. These haven't been incorporated as the existing code seems to get good values based on measurements taken with an oscilloscope. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by:
-
Chris Packham authored
Add binding for AC5 SoC. This SoC only supports NAND SDR timings up to mode 3 so a specific compatible value is needed. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Md Sadre Alam authored
Remove legacy interface implementation Co-developed-by:
Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by:
Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by:
-
Md Sadre Alam authored
Implement exec_op() so we can later get rid of the legacy interface implementation. Co-developed-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Yangtao Li <frank.li@vivo.com> Signed-off-by:
-
- 12 Jul, 2023 22 commits
-
-
Yangtao Li authored
mtd: nand: samsung: Convert to devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() Use devm_platform_ioremap_resource() and devm_platform_get_and_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Use devm_platform_ioremap_resource() to simplify code. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
-
Yangtao Li authored
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by:
-
William Zhang authored
brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d ("mtd: rawnand: Initialize the nand_device object") Signed-off-by:
-
William Zhang authored
When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
-
William Zhang authored
When executing a NAND command within the panic write path, wait for any pending command instead of calling BUG_ON to avoid crashing while already crashing. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
Kursad Oney <kursad.oney@broadcom.com> Reviewed-by:
Kamal Dasu <kamal.dasu@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by:
-
William Zhang authored
If system is busy during the command status polling function, the driver may not get the chance to poll the status register till the end of time out and return the premature status. Do a final check after time out happens to ensure reading the correct status. Fixes: 9d2ee0a6 ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program") Signed-off-by:
-
William Zhang authored
v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Fixes: decba6d4 ("mtd: brcmnand: Add v7.2 controller support") Signed-off-by:
-
Arseniy Krasnov authored
NAND core API already has functions to send NAND_CMD_STATUS and leave status checking mode by sending NAND_CMD_READ0, so use both of them instead of direct access to the controller registers. Signed-off-by:
-
Arseniy Krasnov authored
Export this function to work in pair with 'nand_status_op()' which is already exported. Signed-off-by:
-
Neil Armstrong authored
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove the for OX810 and OX820 nand bindings. Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Daniel Golle <daniel@makrotopia.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Acked-by:
-
Neil Armstrong authored
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 nand. Acked-by:
-
Sridharan S N authored
Add support for: TC58NYG0S3HBAI4 - 1Gb SLC NAND flash TH58NYG2S3HBAI4 - 4Gb SLC NAND flash TH58NYG3S0HBAI6 - 8Gb SLC NAND flash All of these has 8b/512b on-die ECC capability Signed-off-by:
Sridharan S N <quic_sridsn@quicinc.com> Signed-off-by:
-
Sridharan S N authored
This adds support for ESMT F50D2G41KA. This is 2Gb SLC NAND flash with 8b/512b on-die ECC capability. Signed-off-by:
-
Sridharan S N authored
Add support for: GD5F1GQ5RExxH GD5F1GQ4RExxH Both are 1Gb SLC NAND flash with 4b/512b on-die ECC capability and has 2K + 64B PageSize. Signed-off-by:
-
- 09 Jul, 2023 8 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8 ("MAINTAINERS: re-sort all entries and fields") Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
-
