- 05 May, 2020 30 commits
-
-
Joerg Roedel authored
On Exynos platforms there can be more than one SYSMMU (IOMMU) for one DMA master device. Since the IOMMU core code expects only one hardware IOMMU, use the first SYSMMU in the list. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-31-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the OMAP IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-30-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Remove the tracking of device which could not be probed because their IOMMU is not probed yet. Replace it with a call to bus_iommu_probe() when a new IOMMU is probed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-29-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the Renesas IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-28-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the Tegra IOMMU drivers to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-27-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the Rockchip IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-26-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the QCOM IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-25-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the Mediatek-v1 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-24-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the Mediatek IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-23-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the MSM IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-22-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the VirtIO IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-21-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the S390 IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-20-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the PAMU IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-19-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the arm-smmu and arm-smmu-v3 drivers to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-18-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the Intel IOMMU driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200429133712.31431-17-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Convert the AMD IOMMU Driver to use the probe_device() and release_device() call-backs of iommu_ops, so that the iommu core code does the group and sysfs setup. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-16-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Make use of generic IOMMU infrastructure to gather the same information carried in dev_data->passthrough and remove the struct member. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-15-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Add a check to the bus_iommu_probe() call-path to make sure it ignores devices which have already been successfully probed. Then export the bus_iommu_probe() function so it can be used by IOMMU drivers. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-14-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
After the previous changes the iommu group may not have a default domain when iommu_group_add_device() is called. With no default domain iommu_group_create_direct_mappings() will do nothing and no direct mappings will be created. Rename iommu_group_create_direct_mappings() to iommu_create_device_direct_mappings() to better reflect that the function creates direct mappings only for one device and not for all devices in the group. Then move the call to the places where a default domain actually exists. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-13-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
When a bus is initialized with iommu-ops, all devices on the bus are scanned and iommu-groups are allocated for them, and each groups will also get a default domain allocated. Until now this happened as soon as the group was created and the first device added to it. When other devices with different default domain requirements were added to the group later on, the default domain was re-allocated, if possible. This resulted in some back and forth and unnecessary allocations, so change the flow to defer default domain allocation until all devices have been added to their respective IOMMU groups. The default domains are allocated for newly allocated groups after each device on the bus is handled and was probed by the IOMMU driver. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-12-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
This makes it easier to remove to old code-path when all drivers are converted. As a side effect that it also fixes the error cleanup path. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-11-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
This is needed to defer default_domain allocation for new IOMMU groups until all devices have been added to the group. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-10-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Well, not really. The call to iommu_alloc_default_domain() in iommu_group_get_for_dev() has to stay around as long as there are IOMMU drivers using the add/remove_device() call-backs instead of probe/release_device(). Those drivers expect that iommu_group_get_for_dev() returns the device attached to a group and the group set up with a default domain (and the device attached to the groups current domain). But when all drivers are converted this compatability mess can be removed. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-9-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Add call-backs to 'struct iommu_ops' as an alternative to the add_device() and remove_device() call-backs, which will be removed when all drivers are converted. The new call-backs will not setup IOMMU groups and domains anymore, so also add a probe_finalize() call-back where the IOMMU driver can do per-device setup work which require the device to be set up with a group and a domain. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-8-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
When check_device() fails on the device, it is not handled by the IOMMU and amd_iommu_add_device() needs to return -ENODEV. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-7-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
The check was only needed for the DMA-API implementation in the AMD IOMMU driver, which no longer exists. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-6-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
The Intel VT-d driver already has a matching function to determine the default domain type for a device. Wire it up in intel_iommu_ops. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200429133712.31431-5-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Implement the new def_domain_type call-back for the AMD IOMMU driver. Signed-off-by: Joerg Roedel <jroedel@suse.de> Link: https://lore.kernel.org/r/20200429133712.31431-4-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Sai Praneeth Prakhya authored
Some devices are reqired to use a specific type (identity or dma) of default domain when they are used with a vendor iommu. When the system level default domain type is different from it, the vendor iommu driver has to request a new default domain with iommu_request_dma_domain_for_dev() and iommu_request_dm_for_dev() in the add_dev() callback. Unfortunately, these two helpers only work when the group hasn't been assigned to any other devices, hence, some vendor iommu driver has to use a private domain if it fails to request a new default one. This adds def_domain_type() callback in the iommu_ops, so that any special requirement of default domain for a device could be aware by the iommu generic layer. Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> [ jroedel@suse.de: Added iommu_get_def_domain_type() function and use it to allocate the default domain ] Co-developed-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-3-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
Joerg Roedel authored
Move the code out of iommu_group_get_for_dev() into a separate function. Signed-off-by: Joerg Roedel <jroedel@suse.de> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200429133712.31431-2-joro@8bytes.orgSigned-off-by: Joerg Roedel <jroedel@suse.de>
-
- 26 Apr, 2020 10 commits
-
-
Linus Torvalds authored
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Five cifs/smb3 fixes:two for DFS reconnect failover, one lease fix for stable and the others to fix a missing spinlock during reconnect" * tag '5.7-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix uninitialised lease_key in open_shroot() cifs: ensure correct super block for DFS reconnect cifs: do not share tcons with DFS cifs: minor update to comments around the cifs_tcp_ses_lock mutex cifs: protect updating server->dstaddr with a spinlock
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 5.7-rc3. Nothing huge, just the usual collection of: - xhci fixes - gadget driver fixes - syzkaller fuzzing fixes - new device ids and DT bindings - new quirks added for broken devices A few of the gadget driver fixes show up twice here as they were applied to my branch, and also by Felipe to his branch which I then pulled in as we got out of sync a bit. All of these have been in linux-next with no reported issues" * tag 'usb-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (33 commits) USB: sisusbvga: Change port variable from signed to unsigned usb-storage: Add unusual_devs entry for JMicron JMS566 USB: hub: Revert commit bd0e6c96 ("usb: hub: try old enumeration scheme first for high speed devices") USB: hub: Fix handling of connect changes during sleep usb: typec: altmode: Fix typec_altmode_get_partner sometimes returning an invalid pointer xhci: Don't clear hub TT buffer on ep0 protocol stall xhci: prevent bus suspend if a roothub port detected a over-current condition xhci: Fix handling halted endpoint even if endpoint ring appears empty usb: raw-gadget: Fix copy_to/from_user() checks usb: raw-gadget: fix raw_event_queue_fetch locking usb: gadget: udc: atmel: Fix vbus disconnect handling usb: dwc3: gadget: Fix request completion check USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE phy: tegra: Select USB_COMMON for usb_get_maximum_speed() usb: typec: tcpm: Ignore CC and vbus changes in PORT_RESET change usb: f_fs: Clear OS Extended descriptor counts to zero in ffs_data_reset() cdc-acm: introduce a cool down cdc-acm: close race betrween suspend() and acm_softint UAS: fix deadlock in error handling and PM flushing work UAS: no use logging any details in case of ENODEV ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are some tty and serial driver fixes for 5.7-rc3. The "largest" in here are a number of reverts for previous changes to the uartps serial driver that turned out to not be a good idea at all. The others are just small fixes found by people and tools. Included in here is a much-reported symbol export needed by previous changes that happened in 5.7-rc1. All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: hvc: fix buffer overflow during hvc_alloc(). tty: rocket, avoid OOB access tty: serial: bcm63xx: fix missing clk_put() in bcm63xx_uart vt: don't hardcode the mem allocation upper bound tty: serial: owl: add "much needed" clk_prepare_enable() vt: don't use kmalloc() for the unicode screen buffer tty/sysrq: Export sysrq_mask(), sysrq_toggle_support() serial: sh-sci: Make sure status register SCxSR is read in correct sequence serial: sunhv: Initialize lock for non-registered console Revert "serial: uartps: Register own uart console and driver structures" Revert "serial: uartps: Move Port ID to device data structure" Revert "serial: uartps: Change uart ID port allocation" Revert "serial: uartps: Do not allow use aliases >= MAX_UART_INSTANCES" Revert "serial: uartps: Fix error path when alloc failed" Revert "serial: uartps: Use the same dynamic major number for all ports" Revert "serial: uartps: Fix uartps_major handling"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are 4 small misc driver fixes for 5.7-rc3: - mei driver fix - interconnect driver fix - two fpga driver fixes All have been in linux-next with no reported issues" * tag 'char-misc-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: qcom: Fix uninitialized tcs_cmd::wait mei: me: fix irq number stored in hw struct fpga: dfl: pci: fix return value of cci_pci_sriov_configure fpga: zynq: Remove clk_get error message for probe defer
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some small staging and IIO driver fixes for 5.7-rc3 Lots of tiny things for reported issues in staging and IIO drivers, including a counter driver fix as well (the iio drivers seem to be tied to those). Full details of the fixes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (27 commits) staging: vt6656: Fix calling conditions of vnt_set_bss_mode staging: comedi: Fix comedi_device refcnt leak in comedi_open staging: vt6656: Fix pairwise key entry save. staging: vt6656: Fix drivers TBTT timing counter. staging: vt6656: Don't set RCR_MULTICAST or RCR_BROADCAST by default. MAINTAINERS: remove Stefan Popa's email iio: adc: ad7192: fix null pointer de-reference crash during probe iio: core: remove extra semi-colon from devm_iio_device_register() macro iio: adc: ti-ads8344: properly byte swap value iio: imu: inv_mpu6050: fix suspend/resume with runtime power iio: st_sensors: rely on odr mask to know if odr can be set iio: xilinx-xadc: Make sure not exceed maximum samplerate iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode iio: xilinx-xadc: Fix clearing interrupt when enabling trigger iio: xilinx-xadc: Fix ADC-B powerdown iio: dac: ad5770r: fix off-by-one check on maximum number of channels iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device iio: core: Fix handling of 'dB' dt-bindings: iio: adc: stm32-adc: fix id relative path counter: 104-quad-8: Add lock guards - generic interface ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver core fixes from Greg KH: "Here are some small firmware/driver core/debugfs fixes for 5.7-rc3. The debugfs change is now possible as now the last users of debugfs_create_u32() have been fixed up in the different trees that got merged into 5.7-rc1, and I don't want it creeping back in. The firmware changes did cause a regression in linux-next, so the final patch here reverts part of that, re-exporting the symbol to resolve that issue. All of these patches, with the exception of the final one, have been in linux-next with only that one reported issue" * tag 'driver-core-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: firmware_loader: revert removal of the fw_fallback_config export debugfs: remove return value of debugfs_create_u32() firmware_loader: remove unused exports firmware: imx: fix compile-testing
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Vasily Gorbik: - Add a few notrace annotations to avoid potential crashes when switching ftrace tracers. - Avoid setting affinity for floating irqs in pci code. - Fix build issue found by kbuild test robot. * tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/protvirt: fix compilation issue s390/pci: do not set affinity for floating irqs s390/ftrace: fix potential crashes when switching tracers
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - One important fix for a bug in the way we find the cache-line size from the device tree, which was leading to the wrong size being reported to userspace on some platforms. - A fix for 8xx STRICT_KERNEL_RWX which was leaving TLB entries around leading to a window at boot when the strict mapping wasn't enforced. - A fix to enable our KUAP (kernel user access prevention) debugging on PPC32. - A build fix for clang in lib/mpi. Thanks to: Chris Packham, Christophe Leroy, Nathan Chancellor, Qian Cai. * tag 'powerpc-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: lib/mpi: Fix building for powerpc with clang powerpc/mm: Fix CONFIG_PPC_KUAP_DEBUG on PPC32 powerpc/8xx: Fix STRICT_KERNEL_RWX startup test failure powerpc/setup_64: Set cache-line-size based on cache-block-size
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull more Devicetree fixes from Rob Herring: "A couple of schema and kbuild fixes" * tag 'devicetree-fixes-for-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: phy: qcom-qusb2: Fix defaults dt-bindings: Fix erroneous 'additionalProperties' dt-bindings: Fix command line length limit calling dt-mk-schema dt-bindings: Re-enable core schemas for dtbs_check
-