- 08 Apr, 2021 1 commit
-
-
Takashi Sakamoto authored
ALSA control interface allows users to add arbitrary control elements (called "user controls" or "user elements"), and its resource usage is limited just by the max number of control sets (currently 32). This limit, however, is quite loose: each allocation of control set may have 1028 elements, and each element may have up to 512 bytes (ILP32) or 1024 bytes (LP64) of value data. Moreover, each control set may contain the enum strings and TLV data, which can be up to 64kB and 128kB, respectively. Totally, the whole memory consumption may go over 38MB -- it's quite large, and we'd rather like to reduce the size. OTOH, there have been other requests even to increase the max number of user elements; e.g. ALSA firewire stack require the more user controls, hence we want to raise the bar, too. For satisfying both requirements, this patch changes the management of user controls: instead of setting the upper limit of the number of user controls, we check the actual memory allocation size and set the upper limit of the total allocation in bytes. As long as the memory consumption stays below the limit, more user controls are allowed than the current limit 32. At the same time, we set the lower limit (8MB) as default than the current theoretical limit, in order to lower the risk of DoS. As a compromise for lowering the default limit, now the actual memory limit is defined as a module option, 'max_user_ctl_alloc_size', so that user can increase/decrease the limit if really needed, too. Link: https://lore.kernel.org/r/s5htur3zl5e.wl-tiwai@suse.deCo-developed-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Tested-by:
-
- 07 Apr, 2021 2 commits
-
-
Takashi Iwai authored
The implicit feedback quirk table contains the entries that also appear in the capture quirks, and those are all handled to be skipped. For the code simplicity, drop the duped entries in the playback quirk table, and check the match with the capture quirk table instead. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212519 Link: https://lore.kernel.org/r/20210406113837.32041-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
There are a few calls of usb_driver_claim_interface() but all of those miss the proper error checks, as reported by Coverity. This patch adds those missing checks. Along with it, replace the magic pointer with -1 with a constant USB_AUDIO_IFACE_UNUSED for better readability. Reported-by:
coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1475943 ("Error handling issues") Addresses-Coverity-ID: 1475944 ("Error handling issues") Addresses-Coverity-ID: 1475945 ("Error handling issues") Fixes: b1ce7ba6 ("ALSA: usb-audio: claim autodetected PCM interfaces all at once") Fixes: e5779998 ("ALSA: usb-audio: refactor code") Link: https://lore.kernel.org/r/202104051059.FB7F3016@keescook Link: https://lore.kernel.org/r/20210406113534.30455-1-tiwai@suse.deSigned-off-by:
-
- 06 Apr, 2021 1 commit
-
-
Dan Carpenter authored
If count is 16 then this will put the NUL terminator one element beyond the end of the array. Fixes: cb17fe00 ("ALSA: control - add sysfs support to the LED trigger module") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/YGcDOtrimR46vr0k@mwandaSigned-off-by:
-
- 01 Apr, 2021 3 commits
-
-
Takashi Iwai authored
Pull mute-LED helper fixes from Jaroslav. Signed-off-by: -
Jaroslav Kysela authored
It may be possible that the string pointer does not move when parsing. Add a code which detects this state and simply break the parser loop in this case. Signed-off-by:
-
Jaroslav Kysela authored
As static analysis reported, the prev_lops2 should contain the previous lops2 pointer in snd_ctl_disconnect_layer(). Link: https://lore.kernel.org/alsa-devel/96e9bd5c-c8db-0db8-b393-fbf4a047dc80@canonical.com/ Fixes: 3f0638a0 ("ALSA: control - add layer registration routines") Signed-off-by:
-
- 30 Mar, 2021 8 commits
-
-
Takashi Iwai authored
ALSA: control - add generic LED API This patchset tries to resolve the diversity in the audio LED control among the ALSA drivers. A new control layer registration is introduced which allows to run additional operations on top of the elementary ALSA sound controls. A new control access group (three bits in the access flags) was introduced to carry the LED group information for the sound controls. The low-level sound drivers can just mark those controls using this access group. This information is not exported to the user space, but user space can manage the LED sound control associations through sysfs (last patch) per Mark's request. It makes things fully configurable in the kernel and user space (UCM). The actual state ('route') evaluation is really easy (the minimal value check for all channels / controls / cards). If there's more complicated logic for a given hardware, the card driver may eventually export a new read-only sound control for the LED group and do the logic itself. The new LED trigger control code is completely separated and possibly optional (there's no symbol dependency). The full code separation allows eventually to move this LED trigger control to the user space in future. Actually it replaces the already present functionality in the kernel space (HDA drivers) and allows a quick adoption for the recent hardware (ASoC codecs including SoundWire). snd_ctl_led 24576 0 The sound driver implementation is really easy: 1) call snd_ctl_led_request() when control LED layer should be automatically activated / it calls module_request("snd-ctl-led") on demand / 2) mark all related kcontrols with SNDRV_CTL_ELEM_ACCESS_SPK_LED or SNDRV_CTL_ELEM_ACCESS_MIC_LED Link: https://lore.kernel.org/r/20210317172945.842280-1-perex@perex.czSigned-off-by: -
Jaroslav Kysela authored
We need to manage the kcontrol entries association for the LED trigger from the user space. This patch adds a layer to the sysfs tree like: /sys/devices/virtual/sound/ctl-led/mic + card0 | + attach | + detach | ... + card1 + attach ... Operations: attach and detach - amixer style ID is accepted and easy strings for numid and simple names reset - reset all associated kcontrol entries list - list associated kcontrol entries (numid values only) Additional symlinks: /sys/devices/virtual/sound/ctl-led/mic/card0/card -> /sys/class/sound/card0 /sys/class/sound/card0/controlC0/led-mic -> /sys/devices/virtual/sound/ctl-led/mic/card0 Signed-off-by: -
Jaroslav Kysela authored
Create SYSFS/devices/virtual/sound/ctl-led tree (with SYSFS/class/sound/ctl-led symlink). speaker/ +-- mode +-- brightness mic/ +-- mode +-- brightness Copy the idea from the HDA driver and allow to set the audio LEDs based on the various modes: - follow mute - follow moute (inverted to follow mute) - off - on Also, the actual LED state is exposed. Signed-off-by: -
Jaroslav Kysela authored
With the new snd-ctl-led module, we have a generic way to trigger audio LEDs based on the sound control changes. Remove the custom implementation from the HDA driver. Move the LED initialization before snd_hda_gen_parse_auto_config() call in all drivers to create marked controls there. Signed-off-by:
-
Jaroslav Kysela authored
The recent laptops have usually two LEDs assigned to reflect the speaker and microphone mute state. This implementation adds a tiny layer on top of the control API which calculates the state for those LEDs using the driver callbacks. Two new access flags are introduced to describe the controls which affects the audio path settings (an easy code change for drivers). The LED resource can be shared with multiple sound cards with this code. The user space controls may be added to the state chain on demand, too. This code should replace the LED code in the HDA driver and add a possibility to easy extend the other drivers (ASoC codecs etc.). Signed-off-by:
-
Jaroslav Kysela authored
The layer registration allows to handle an extra functionality on top of the control API. It can be used for the audio LED control for example. Signed-off-by:
-
Jaroslav Kysela authored
This helper is required for the following generic LED mute patch. The helper also simplifies some other functions. Signed-off-by:
-
Jia Zhou authored
modification in commit 2a3f7221 ("ALSA: core: Fix card races between register and disconnect") resulting in this problem. Fixes: 2a3f7221 ("ALSA: core: Fix card races between register and disconnect") Signed-off-by:
Jia Zhou <zhou.jia2@zte.com.cn> Signed-off-by:
Yi Wang <wang.yi59@zte.com.cn> Link: https://lore.kernel.org/r/1616989007-34429-1-git-send-email-wang.yi59@zte.com.cnSigned-off-by:
-
- 28 Mar, 2021 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tooling fixes from Arnaldo Carvalho de Melo: - Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records. - Fix 'perf top' BPF support related crash with perf_event_paranoid=3 + kptr_restrict. - Validate raw event with sysfs exported format bits. - Fix waipid on SIGCHLD delivery bugs in 'perf daemon'. - Change to use bash for daemon test on Debian, where the default is dash and thus fails for use of bashisms in this test. - Fix memory leak in vDSO found using ASAN. - Remove now useless (due to the fact that BPF now supports static vars) failing sub test "BPF relocation checker". - Fix auxtrace queue conflict. - Sync linux/kvm.h with the kernel sources. * tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf test: Change to use bash for daemon test perf record: Fix memory leak in vDSO found using ASAN perf test: Remove now useless failing sub test "BPF relocation checker" perf daemon: Return from kill functions perf daemon: Force waipid for all session on SIGCHLD delivery perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict perf pmu: Validate raw event with sysfs exported format bits perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records tools headers UAPI: Sync linux/kvm.h with the kernel sources perf synthetic-events: Fix uninitialized 'kernel_thread' variable perf auxtrace: Fix auxtrace queue conflict
-
git://github.com/ojeda/linuxLinus Torvalds authored
Pull auxdisplay fix from Miguel Ojeda: "Remove in_interrupt() usage (Sebastian Andrzej Siewior)" * tag 'auxdisplay-for-linus-v5.12-rc6' of git://github.com/ojeda/linux: auxdisplay: Remove in_interrupt() usage.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Two fixes: - Fix build failure on Ubuntu with new GCC packages that turn on -fcf-protection - Fix SME memory encryption PTE encoding bug - AFAICT the code worked on 4K page sizes (level 1) but had the wrong shift at higher page level orders (level 2 and higher)" * tag 'x86-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Turn off -fcf-protection for realmode targets x86/mem_encrypt: Correct physical address calculation in __set_clr_pte_enc() -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Ingo Molnar: "Fix the non-debug mutex_lock_io_nested() method to map to mutex_lock_io() instead of mutex_lock(). Right now nothing uses this API explicitly, but this is an accident waiting to happen" * tag 'locking-urgent-2021-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/mutex: Fix non debug version of mutex_lock_io_nested()
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Five cifs/smb3 fixes, two for stable. Includes an important fix for encryption and an ACL fix, as well as a fix for possible reflink data corruption" * tag '5.12-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6: smb3: fix cached file size problems in duplicate extents (reflink) cifs: Silently ignore unknown oplock break handle cifs: revalidate mapping when we open files for SMB1 POSIX cifs: Fix chmod with modefromsid when an older ACE already exists. cifs: Adjust key sizes and key generation routines for AES256 encryption
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Use thread info versions of flag testing, as discussed last week. - The series enabling PF_IO_WORKER to just take signals, instead of needing to special case that they do not in a bunch of places. Ends up being pretty trivial to do, and then we can revert all the special casing we're currently doing. - Kill dead pointer assignment - Fix hashed part of async work queue trace - Fix sign extension issue for IORING_OP_PROVIDE_BUFFERS - Fix a link completion ordering regression in this merge window - Cancellation fixes * tag 'io_uring-5.12-2021-03-27' of git://git.kernel.dk/linux-block: io_uring: remove unsued assignment to pointer io io_uring: don't cancel extra on files match io_uring: don't cancel-track common timeouts io_uring: do post-completion chore on t-out cancel io_uring: fix timeout cancel return code Revert "signal: don't allow STOP on PF_IO_WORKER threads" Revert "kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing" Revert "kernel: treat PF_IO_WORKER like PF_KTHREAD for ptrace/signals" Revert "signal: don't allow sending any signals to PF_IO_WORKER threads" kernel: stop masking signals in create_io_thread() io_uring: handle signals for IO threads like a normal thread kernel: don't call do_exit() for PF_IO_WORKER threads io_uring: maintain CQE order of a failed link io-wq: fix race around pending work on teardown io_uring: do ctx sqd ejection in a clear context io_uring: fix provide_buffers sign extension io_uring: don't skip file_end_write() on reissue io_uring: correct io_queue_async_work() traces io_uring: don't use {test,clear}_tsk_thread_flag() for current
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Fix regression from this merge window with the xarray partition change, which allowed partition counts that overflow the u8 that holds the partition number (Ming) - Fix zone append warning (Johannes) - Segmentation count fix for multipage bvecs (David) - Partition scan fix (Chris) * tag 'block-5.12-2021-03-27' of git://git.kernel.dk/linux-block: block: don't create too many partitions block: support zone append bvecs block: recalculate segment count for multi-segment discards correctly block: clear GD_NEED_PART_SCAN later in bdev_disk_changed
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Seven fixes, all in drivers (qla2xxx, mkt3sas, qedi, target, ibmvscsi). The most serious are the target pscsi oom and the qla2xxx revert which can otherwise cause a use after free" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: pscsi: Clean up after failure in pscsi_map_sg() scsi: target: pscsi: Avoid OOM in pscsi_map_sg() scsi: mpt3sas: Fix error return code of mpt3sas_base_attach() scsi: qedi: Fix error return code of qedi_alloc_global_queues() scsi: Revert "qla2xxx: Make sure that aborted commands are freed" scsi: ibmvfc: Make ibmvfc_wait_for_ops() MQ aware scsi: ibmvfc: Fix potential race in ibmvfc_wait_for_ops()
-
- 27 Mar, 2021 12 commits
-
-
Colin Ian King authored
There is an assignment to io that is never read after the assignment, the assignment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
As tasks always wait and kill their io-wq on exec/exit, files are of no more concern to us, so we don't need to specifically cancel them by hand in those cases. Moreover we should not, because io_match_task() looks at req->task->files now, which is always true and so leads to extra cancellations, that wasn't a case before per-task io-wq. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/0566c1de9b9dd417f5de345c817ca953580e0e2e.1616696997.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
Don't account usual timeouts (i.e. not linked) as REQ_F_INFLIGHT but keep behaviour prior to dd59a3d5 ("io_uring: reliably cancel linked timeouts"). Signed-off-by:
-
Pavel Begunkov authored
Don't forget about io_commit_cqring() + io_cqring_ev_posted() after exit/exec cancelling timeouts. Both functions declared only after io_kill_timeouts(), so to avoid tons of forward declarations move it down. Signed-off-by:
-
Pavel Begunkov authored
When we cancel a timeout we should emit a sensible return code, like -ECANCELED but not 0, otherwise it may trick users. Signed-off-by:
-
Jens Axboe authored
This reverts commit 4db4b1a0. The IO threads allow and handle SIGSTOP now, so don't special case them anymore in task_set_jobctl_pending(). Signed-off-by:
-
Jens Axboe authored
This reverts commit 15b2219f. Before IO threads accepted signals, the freezer using take signals to wake up an IO thread would cause them to loop without any way to clear the pending signal. That is no longer the case, so stop special casing PF_IO_WORKER in the freezer. Signed-off-by:
-
Jens Axboe authored
This reverts commit 6fb8f43c. The IO threads do allow signals now, including SIGSTOP, and we can allow ptrace attach. Attaching won't reveal anything interesting for the IO threads, but it will allow eg gdb to attach to a task with io_urings and IO threads without complaining. And once attached, it will allow the usual introspection into regular threads. Signed-off-by:
-
Jens Axboe authored
This reverts commit 5be28c8f. IO threads now take signals just fine, so there's no reason to limit them specifically. Revert the change that prevented that from happening. Signed-off-by:
-
Jens Axboe authored
This is racy - move the blocking into when the task is created and we're marking it as PF_IO_WORKER anyway. The IO threads are now prepared to handle signals like SIGSTOP as well, so clear that from the mask to allow proper stopping of IO threads. Acked-by:
"Eric W. Biederman" <ebiederm@xmission.com> Reported-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Jens Axboe authored
We go through various hoops to disallow signals for the IO threads, but there's really no reason why we cannot just allow them. The IO threads never return to userspace like a normal thread, and hence don't go through normal signal processing. Instead, just check for a pending signal as part of the work loop, and call get_signal() to handle it for us if anything is pending. With that, we can support receiving signals, including special ones like SIGSTOP. Acked-by:
-
Ming Lei authored
Commit a33df75c ("block: use an xarray for disk->part_tbl") drops the check on max supported number of partitionsr, and allows partition with bigger partition numbers to be added. However, ->bd_partno is defined as u8, so partition index of xarray table may not match with ->bd_partno. Then delete_partition() may delete one unmatched partition, and caused use-after-free. Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reported-by: syzbot+8fede7e30c7cee0de139@syzkaller.appspotmail.com Fixes: a33df75c ("block: use an xarray for disk->part_tbl") Signed-off-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 26 Mar, 2021 4 commits
-
-
Steve French authored
There were two problems (one of which could cause data corruption) that were noticed with duplicate extents (ie reflink) when debugging why various xfstests were being incorrectly skipped (e.g. generic/138, generic/140, generic/142). First, we were not updating the file size locally in the cache when extending a file due to reflink (it would refresh after actimeo expires) but xfstest was checking the size immediately which was still 0 so caused the test to be skipped. Second, we were setting the target file size (which could shrink the file) in all cases to the end of the reflinked range rather than only setting the target file size when reflink would extend the file. CC: <stable@vger.kernel.org> Signed-off-by:Steve French <stfrench@microsoft.com>
-
Vincent Whitchurch authored
Make SMB2 not print out an error when an oplock break is received for an unknown handle, similar to SMB1. The debug message which is printed for these unknown handles may also be misleading, so fix that too. The SMB2 lease break path is not affected by this patch. Without this, a program which writes to a file from one thread, and opens, reads, and writes the same file from another thread triggers the below errors several times a minute when run against a Samba server configured with "smb2 leases = no". CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2 00000000: 424d53fe 00000040 00000000 00000012 .SMB@........... 00000010: 00000001 00000000 ffffffff ffffffff ................ 00000020: 00000000 00000000 00000000 00000000 ................ 00000030: 00000000 00000000 00000000 00000000 ................ Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by:
Tom Talpey <tom@talpey.com> Reviewed-by:
Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by:
-
Ronnie Sahlberg authored
RHBZ: 1933527 Under SMB1 + POSIX, if an inode is reused on a server after we have read and cached a part of a file, when we then open the new file with the re-cycled inode there is a chance that we may serve the old data out of cache to the application. This only happens for SMB1 (deprecated) and when posix are used. The simplest solution to avoid this race is to force a revalidate on smb1-posix open. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
-
Shyam Prasad N authored
My recent fixes to cifsacl to maintain inherited ACEs had regressed modefromsid when an older ACL already exists. Found testing xfstest 495 with modefromsid mount option Fixes: f5065508 ("cifs: Retain old ACEs when converting between mode bits and ACL") Signed-off-by:
Shyam Prasad N <sprasad@microsoft.com> Reviewed-by:
-
