- 15 Sep, 2016 40 commits
-
-
Nicolai Stange authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit f2d1362f upstream. Currently, if the number of leading zeros is greater than fits into a complete limb, mpi_write_sgl() skips them by iterating over them limb-wise. However, it fails to adjust its internal leading zeros tracking variable, lzeros, accordingly: it does a p -= sizeof(alimb); continue; which should really have been a lzeros -= sizeof(alimb); continue; Since lzeros never decreases if its initial value >= sizeof(alimb), nothing gets copied by mpi_write_sgl() in that case. Instead of skipping the high order zero limbs within the loop as shown above, fix the issue by adjusting the copying loop's bounds. Fixes: 2d4d1eea ("lib/mpi: Add mpi sgl helpers") Signed-off-by:
Nicolai Stange <nicstange@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Mika Båtsman authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 8a092e68 upstream. Bypass support was added in commit d38018f2 ("regulator: anatop: Add bypass support to digital LDOs"). A check for valid voltage selectors was added in commit da0607c8 ("regulator: anatop: Fail on invalid voltage selector") but it also discards all regulators that are in bypass mode. Add check for the bypass setting. Errors below were seen on a Variscite mx6 board. anatop_regulator 20c8000.anatop:regulator-vddcore@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddcore@140 failed with error -22 anatop_regulator 20c8000.anatop:regulator-vddsoc@140: Failed to read a valid default voltage selector. anatop_regulator: probe of 20c8000.anatop:regulator-vddsoc@140 failed with error -22 Fixes: da0607c8 ("regulator: anatop: Fail on invalid voltage selector") Signed-off-by:
Mika Båtsman <mbatsman@mvista.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 48a61e1e upstream. Add proper error path (for disabling runtime PM) when registering of hwrng fails. Fixes: b329669e ("hwrng: exynos - Add support for Exynos random number generator") Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Sai Gurrappadi authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit e43e94c1 upstream. Currently, the userspace governor only updates frequency on GOV_LIMITS if policy->cur falls outside policy->{min/max}. However, it is also necessary to update current frequency on GOV_LIMITS to match the user requested value if it can be achieved within the new policy->{max/min}. This was previously the behaviour in the governor until commit d1922f02 ("cpufreq: Simplify userspace governor") which incorrectly assumed that policy->cur == user requested frequency via scaling_setspeed. This won't be true if the user requested frequency falls outside policy->{min/max}. Ex: a temporary thermal cap throttled the user requested frequency. Fix this by storing the user requested frequency in a seperate variable. The governor will then try to achieve this request on every GOV_LIMITS change. Fixes: d1922f02 (cpufreq: Simplify userspace governor) Signed-off-by:
Sai Gurrappadi <sgurrappadi@nvidia.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
James Hogan authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 096a8b6d upstream. The argument i of atomic_*_return() operations is given to inline asm with the "bd" constraint, which means "An Op2 register where Op1 is a data unit register and the instruction supports O2R", however Op1 is constrained by "da" which allows an address unit register to be used. Fix the constraint to use "br", meaning "An Op2 register and the instruction supports O2R", i.e. not requiring Op1 to be a data unit register. Fixes: d6dfe250 ("locking,arch,metag: Fold atomic_ops") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
Tyrel Datwyler authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit a87eeb90 upstream. Commit 655ee63c ("scsi constants: command, sense key + additional sense string") added a "Completed" sense string with key 0xF to snstext[], but failed to updated the upper bounds check of the sense key in scsi_sense_key_string(). Fixes: 655ee63c ("[SCSI] scsi constants: command, sense key + additional sense strings") Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 8ddc0563 upstream. I hit this with syzkaller: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff88011278d600 task.stack: ffff8801120c0000 RIP: 0010:[<ffffffff82c8ba07>] [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP: 0018:ffff8801120c7a60 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007 RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048 RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790 R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980 R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286 FS: 00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0 Stack: ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0 ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000 ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0 Call Trace: [<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670 [<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0 [<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46 RIP [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100 RSP <ffff8801120c7a60> ---[ end trace 5955b08db7f2b029 ]--- This can happen if snd_hrtimer_open() fails to allocate memory and returns an error, which is currently not checked by snd_timer_open(): ioctl(SNDRV_TIMER_IOCTL_SELECT) - snd_timer_user_tselect() - snd_timer_close() - snd_hrtimer_close() - (struct snd_timer *) t->private_data = NULL - snd_timer_open() - snd_hrtimer_open() - kzalloc() fails; t->private_data is still NULL ioctl(SNDRV_TIMER_IOCTL_START) - snd_timer_user_start() - snd_timer_start() - snd_timer_start1() - snd_hrtimer_start() - t->private_data == NULL // boom Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 6b760bb2 upstream. I got this: divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 task: ffff8801120a9580 task.stack: ffff8801120b0000 RIP: 0010:[<ffffffff82c8bd9a>] [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP: 0018:ffff88011aa87da8 EFLAGS: 00010006 RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001 RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048 R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00 R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000 FS: 00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76 ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0 00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0 Call Trace: <IRQ> [<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00 [<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130 [<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0 [<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0 [<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0 [<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0 [<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0 [<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0 [<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0 <EOI> [<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60 [<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670 [<ffffffff82c87015>] snd_timer_continue+0x45/0x80 [<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830 [<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90 [<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0 [<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370 [<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80 [<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050 [<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200 [<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0 [<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0 [<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190 [<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0 [<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0 [<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0 [<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25 Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00 RIP [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0 RSP <ffff88011aa87da8> ---[ end trace 6aa380f756a21074 ]--- The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a completely new/unused timer -- it will have ->sticks == 0, which causes a divide by 0 in snd_hrtimer_callback(). Signed-off-by:
-
Vegard Nossum authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 11749e08 upstream. I got this with syzkaller: ================================================================== BUG: KASAN: null-ptr-deref on address 0000000000000020 Read of size 32 by task syz-executor/22519 CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2 014 0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90 ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80 ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68 Call Trace: [<ffffffff81f9f141>] dump_stack+0x83/0xb2 [<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0 [<ffffffff8161ff74>] kasan_report+0x34/0x40 [<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790 [<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0 [<ffffffff8161e9c1>] kasan_check_read+0x11/0x20 [<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250 [<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0 [<ffffffff8127c278>] ? do_group_exit+0x108/0x330 [<ffffffff8174653a>] ? fsnotify+0x72a/0xca0 [<ffffffff81674dfe>] __vfs_read+0x10e/0x550 [<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0 [<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50 [<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60 [<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190 [<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380 [<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0 [<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0 [<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0 [<ffffffff81675355>] vfs_read+0x115/0x330 [<ffffffff81676371>] SyS_read+0xd1/0x1a0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20 [<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0 [<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0 [<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0 [<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0 [<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================== There are a couple of problems that I can see: - ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets tu->queue/tu->tqueue to NULL on memory allocation failure, so read() would get a NULL pointer dereference like the above splat - the same ioctl() can free tu->queue/to->tqueue which means read() could potentially see (and dereference) the freed pointer We can fix both by taking the ioctl_lock mutex when dereferencing ->queue/->tqueue, since that's always held over all the ioctl() code. Just looking at the code I find it likely that there are more problems here such as tu->qhead pointing outside the buffer if the size is changed concurrently using SNDRV_TIMER_IOCTL_PARAMS. Signed-off-by:
-
Kai-Heng Feng authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit fd06c77e upstream. The subwoofer on Inspiron 7559 was disabled originally. Applying a pin fixup to node 0x1b can enable it and make it work. Old pin: 0x411111f0 New pin: 0x90170151 Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Shrirang Bagul authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 311042d1 upstream. This patch enables headset microphone on some variants of Dell Inspiron 5468. (Dell SSID 0x07ad) BugLink: https://bugs.launchpad.net/bugs/1617900Signed-off-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 816f318b upstream. When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Takashi Sakamoto authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 6b1ca4bc upstream. In hwdep interface of fireworks driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handles the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it don't handle usual interrupts from hardware. This commit fixes this bug, performing the accessing outside spinlock. This commit also gives up counting the number of queued response messages to simplify ring-buffer management. Reported-by:
Vaishali Thakkar <vaishali.thakkar@oracle.com> Fixes: 555e8a8f('ALSA: fireworks: Add command/response functionality into hwdep interface') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
-
Takashi Sakamoto authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 04b2d9c9 upstream. In hwdep interface of firewire-tascam driver, accessing to user space is in a critical section with disabled local interrupt. Depending on architecture, accessing to user space can cause page fault exception. Then local processor stores machine status and handle the synchronous event. A handler corresponding to the event can call task scheduler to wait for preparing pages. In a case of usage of single core processor, the state to disable local interrupt is worse because it doesn't handle usual interrupts from hardware. This commit fixes this bug, by performing the accessing outside spinlock. Reported-by:
-
Ken Lin authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 83d9956b upstream. Avoid getting sample rate on B850V3 CP2114 as it is unsupported and causes noisy "current rate is different from the runtime rate" messages when playback starts. Signed-off-by:
Ken Lin <ken.lin@advantech.com.tw> Signed-off-by:
Akshay Bhat <akshay.bhat@timesys.com> Signed-off-by:
-
Horia Geantă authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 8b18e235 upstream. For algorithms that implement IV generators before the crypto ops, the IV needed for decryption is initially located in req->src scatterlist, not in req->iv. Avoid copying the IV into req->iv by modifying the (givdecrypt) descriptors to load it directly from req->src. aead_givdecrypt() is no longer needed and goes away. Fixes: 479bcc7c ("crypto: caam - Convert authenc to new AEAD interface") Signed-off-by:
Horia Geantă <horia.geanta@nxp.com> Signed-off-by:
-
Oleg Nesterov authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 6c4687cc upstream. __replace_page() wronlgy calls mem_cgroup_cancel_charge() in "success" path, it should only do this if page_check_address() fails. This means that every enable/disable leads to unbalanced mem_cgroup_uncharge() from put_page(old_page), it is trivial to underflow the page_counter->count and trigger OOM. Reported-and-tested-by:
Brenden Blanco <bblanco@plumgrid.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Reviewed-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov@virtuozzo.com> Fixes: 00501b53 ("mm: memcontrol: rewrite charge API") Link: http://lkml.kernel.org/r/20160817153629.GB29724@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wanpeng Li authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 2e63ad4b upstream. native_smp_prepare_cpus -> default_setup_apic_routing -> enable_IR_x2apic -> irq_remapping_prepare -> intel_prepare_irq_remapping -> intel_setup_irq_remapping So IR table is setup even if "noapic" boot parameter is added. As a result we crash later when the interrupt affinity is set due to a half initialized remapping infrastructure. Prevent remap initialization when IOAPIC is disabled. Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1471954039-3942-1-git-send-email-wanpeng.li@hotmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Benjamin Coddington authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit a77ec83a upstream. The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi command's response iovec throughout the lifetime of the command. Rather, it is more likely to contain an iovec from an immediately following command after looping back around to vhost_get_vq_desc(). Pass along the iovec entirely instead. Fixes: 79c14141 ("vhost/scsi: Convert completion path to use copy_to_iter") Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
-
Kent Overstreet authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit acc9cf8c upstream. This patch fixes a cachedev registration-time allocation deadlock. This can deadlock on boot if your initrd auto-registeres bcache devices: Allocator thread: [ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds. [ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache] [ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache] [ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache] [ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950 [ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache] Registration thread: [ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds. [ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90 [ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache] [ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache] [ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0 [ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache] [ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70 [ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350 [ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache] [ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache] [ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20 [ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50 [ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180 [ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110 [ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110 [ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0 [ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0 [ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70 [ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0 [ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80 [ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71 The fifo code in upstream bcache can't use the last element in the buffer, which was the cause of the bug: if you asked for a power of two size, it'd give you a fifo that could hold one less than what you asked for rather than allocating a buffer twice as big. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Tested-by:
Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by:
-
Vincent Stehlé authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit c0082e98 upstream. An assertion in layout_in_gaps() verifies that the gap_lebs pointer is below the maximum bound. When computing this maximum bound the idx_lebs count is multiplied by sizeof(int), while C pointers arithmetic does take into account the size of the pointed elements implicitly already. Remove the multiplication to fix the assertion. Fixes: 1e51764a ("UBIFS: add new flash file system") Signed-off-by:
Vincent Stehlé <vincent.stehle@intel.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit e1ff3dd1 upstream. Workdir creation fails in latest kernel. Fix by allowing EOPNOTSUPP as a valid return value from vfs_removexattr(XATTR_NAME_POSIX_ACL_*). Upper filesystem may not support ACL and still be perfectly able to support overlayfs. Reported-by:
Martin Ziegler <ziegler@uni-freiburg.de> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: c11b9fdd ("ovl: remove posix_acl_default from workdir") Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 7cb35119 upstream. Be defensive about what underlying fs provides us in the returned xattr list buffer. If it's not properly null terminated, bail out with a warning insead of BUG. Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit c11b9fdd upstream. Clear out posix acl xattrs on workdir and also reset the mode after creation so that an inherited sgid bit is cleared. Signed-off-by:
-
Miklos Szeredi authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 0956254a upstream. When a copy up of a directory occurs which has the opaque xattr set, the xattr remains in the upper directory. The immediate behavior with overlayfs is that the upper directory is not treated as opaque, however after a remount the opaque flag is used and upper directory is treated as opaque. This causes files created in the lower layer to be hidden when using multiple lower directories. Fix by not copying up the opaque flag. To reproduce: ----8<---------8<---------8<---------8<---------8<---------8<---- mkdir -p l/d/s u v w mnt mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt rm -rf mnt/d/ mkdir -p mnt/d/n umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt touch mnt/d/foo umount mnt mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt ls mnt/d ----8<---------8<---------8<---------8<---------8<---------8<---- output should be: "foo n" Reported-by:
Derek McGowan <dmcg@drizz.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291Signed-off-by:
-
Al Viro authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 5955102c upstream parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [only the fs.h change included to make backports easier - gregkh] Signed-off-by:
-
Al Viro authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 57b8f112 upstream. Signed-off-by:
-
John Stultz authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 27727df2 upstream. When I added some extra sanity checking in timekeeping_get_ns() under CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns() method was using timekeeping_get_ns(). Thus the locking added to the debug checks broke the NMI-safety of __ktime_get_fast_ns(). This patch open-codes the timekeeping_get_ns() logic for __ktime_get_fast_ns(), so can avoid any deadlocks in NMI. Fixes: 4ca22c26 "timekeeping: Add warnings when overflows or underflows are observed" Reported-by:
Steven Rostedt <rostedt@goodmis.org> Reported-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.orgSigned-off-by:
-
John Stultz authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit a4f8f666 upstream. It was reported that hibernation could fail on the 2nd attempt, where the system hangs at hibernate() -> syscore_resume() -> i8237A_resume() -> claim_dma_lock(), because the lock has already been taken. However there is actually no other process would like to grab this lock on that problematic platform. Further investigation showed that the problem is triggered by setting /sys/power/pm_trace to 1 before the 1st hibernation. Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend, and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller than 1970) to the release date of that motherboard during POST stage, thus after resumed, it may seem that the system had a significant long sleep time which is a completely meaningless value. Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the sleep time happened to be set to 1, fls() returns 32 and we add 1 to sleep_time_bin[32], which causes an out of bounds array access and therefor memory being overwritten. As depicted by System.map: 0xffffffff81c9d080 b sleep_time_bin 0xffffffff81c9d100 B dma_spin_lock the dma_spin_lock.val is set to 1, which caused this problem. This patch adds a sanity check in tk_debug_account_sleep_time() to ensure we don't index past the sleep_time_bin array. [jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the issue slightly differently, but borrowed his excelent explanation of the issue here.] Fixes: 5c83545f "power: Add option to log time spent in suspend" Reported-by:
Janek Kozicki <cosurgi@gmail.com> Reported-by:
Chen Yu <yu.c.chen@intel.com> Signed-off-by:
-
Dave Chinner authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit f3d7ebde upstream. From inspection, the superblock sb_inprogress check is done in the verifier and triggered only for the primary superblock via a "bp->b_bn == XFS_SB_DADDR" check. Unfortunately, the primary superblock is an uncached buffer, and hence it is configured by xfs_buf_read_uncached() with: bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */ And so this check never triggers. Fix it. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Christoph Huber authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 3e103a65 upstream. commit cbaadf0f ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") refactored code such that the SSC is reset on every startup; this breaks duplex audio (e.g. first start audio playback, then start record, causing the playback to stop/hang) Fixes: cbaadf0f (ASoC: atmel_ssc_dai: refactor the startup and shutdown) Signed-off-by:
Christoph Huber <c.huber@bct-electronic.com> Signed-off-by:
Peter Meerwald-Stadler <p.meerwald@bct-electronic.com> Signed-off-by:
-
Rob Clark authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 89f82cbb upstream. Use instead __copy_from_user_inatomic() and fallback to slow-path where we drop and re-aquire the lock in case of fault. Reported-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Daniel Vetter authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 6f00975c upstream. Somehow this one slipped through, which means drivers without modeset support can be oopsed (since those also don't call drm_mode_config_init, which means the crtc lookup will chase an uninitalized idr). Reported-by:
Alexander Potapenko <glider@google.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Christian König authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 13f479b9 upstream. This bug seems to be present for a very long time. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Martin Schwidefsky authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 532c34b5 upstream. The sclp_ctl_ioctl_sccb function uses two copy_from_user calls to retrieve the sclp request from user space. The first copy_from_user fetches the length of the request which is stored in the first two bytes of the request. The second copy_from_user gets the complete sclp request, but this copies the length field a second time. A malicious user may have changed the length in the meantime. Reported-by:
Pengfei Wang <wpengfeinudt@gmail.com> Reviewed-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Juerg Haefliger <juerg.haefliger@hpe.com> Signed-off-by:
-
Balbir Singh authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 568ac888 upstream. cgroup_threadgroup_rwsem is acquired in read mode during process exit and fork. It is also grabbed in write mode during __cgroups_proc_write(). I've recently run into a scenario with lots of memory pressure and OOM and I am beginning to see systemd __switch_to+0x1f8/0x350 __schedule+0x30c/0x990 schedule+0x48/0xc0 percpu_down_write+0x114/0x170 __cgroup_procs_write.isra.12+0xb8/0x3c0 cgroup_file_write+0x74/0x1a0 kernfs_fop_write+0x188/0x200 __vfs_write+0x6c/0xe0 vfs_write+0xc0/0x230 SyS_write+0x6c/0x110 system_call+0x38/0xb4 This thread is waiting on the reader of cgroup_threadgroup_rwsem to exit. The reader itself is under memory pressure and has gone into reclaim after fork. There are times the reader also ends up waiting on oom_lock as well. __switch_to+0x1f8/0x350 __schedule+0x30c/0x990 schedule+0x48/0xc0 jbd2_log_wait_commit+0xd4/0x180 ext4_evict_inode+0x88/0x5c0 evict+0xf8/0x2a0 dispose_list+0x50/0x80 prune_icache_sb+0x6c/0x90 super_cache_scan+0x190/0x210 shrink_slab.part.15+0x22c/0x4c0 shrink_zone+0x288/0x3c0 do_try_to_free_pages+0x1dc/0x590 try_to_free_pages+0xdc/0x260 __alloc_pages_nodemask+0x72c/0xc90 alloc_pages_current+0xb4/0x1a0 page_table_alloc+0xc0/0x170 __pte_alloc+0x58/0x1f0 copy_page_range+0x4ec/0x950 copy_process.isra.5+0x15a0/0x1870 _do_fork+0xa8/0x4b0 ppc_clone+0x8/0xc In the meanwhile, all processes exiting/forking are blocked almost stalling the system. This patch moves the threadgroup_change_begin from before cgroup_fork() to just before cgroup_canfork(). There is no nee to worry about threadgroup changes till the task is actually added to the threadgroup. This avoids having to call reclaim with cgroup_threadgroup_rwsem held. tj: Subject and description edits. Signed-off-by:
Balbir Singh <bsingharora@gmail.com> Acked-by:
Zefan Li <lizefan@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Ming Lei authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 4d70dca4 upstream. After arbitrary bio size was introduced, the incoming bio may be very big. We have to split the bio into small bios so that each holds at most BIO_MAX_PAGES bvecs for safety reason, such as bio_clone(). This patch fixes the following kernel crash: > [ 172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 > [ 172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a > [ 172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0 > [ 172.660399] Oops: 0000 [#1] SMP > [...] > [ 172.664780] Call Trace: > [ 172.664813] [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1] > [ 172.664846] [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4 > [ 172.664880] [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod] > [ 172.664912] [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155 > [ 172.664947] [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache] > [ 172.664981] [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache] > [ 172.665016] [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache] The issue can be reproduced by the following steps: - create one raid1 over two virtio-blk - build bcache device over the above raid1 and another cache device and bucket size is set as 2Mbytes - set cache mode as writeback - run random write over ext4 on the bcache device Fixes: 54efd50b(block: make generic_make_request handle arbitrarily sized bios) Reported-by:
Sebastian Roesner <sroesner-kernelorg@roesner-online.de> Reported-by:
Eric Wheeler <bcache@lists.ewheeler.net> Cc: Shaohua Li <shli@fb.com> Acked-by:
Ming Lei <ming.lei@canonical.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 1b856086 upstream. blk_set_queue_dying() can be called while another thread is submitting I/O or changing queue flags, e.g. through dm_stop_queue(). Hence protect the QUEUE_FLAG_DYING flag change with locking. Signed-off-by:
-
Daeho Jeong authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit b47820ed upstream. We temporally change checksum fields in buffers of some types of metadata into '0' for verifying the checksum values. By doing this without locking the buffer, some metadata's checksums, which are being committed or written back to the storage, could be damaged. In our test, several metadata blocks were found with damaged metadata checksum value during recovery process. When we only verify the checksum value, we have to avoid modifying checksum fields directly. Signed-off-by:
Daeho Jeong <daeho.jeong@samsung.com> Signed-off-by:
Youngjin Gil <youngjin.gil@samsung.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Cc: Török Edwin <edwin@etorok.net> Signed-off-by:
-
Jan Kara authored
BugLink: http://bugs.launchpad.net/bugs/1624037 commit 2e81a4ee upstream. When we need to move xattrs into external xattr block, we call ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end up calling ext4_mark_inode_dirty() again which will recurse back into the inode expansion code leading to deadlocks. Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move its management into ext4_expand_extra_isize_ea() since its manipulation is safe there (due to xattr_sem) from possible races with ext4_xattr_set_handle() which plays with it as well. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
