We add the call of_node_put(bp->phy_node) to all associated error
paths for memory clean up.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We add the call of_phy_deregister_fixed_link to all associated
error paths for memory clean up.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

GOP statistics from all ports of one instance of the driver are gathered
with one work recalled in loop in a workqueue. The loop is started when
a port is up, and stopped when a port is down. This last condition is
obviously wrong.

Fix this by having a work per port. This way, starting and stoping it
when the port is up or down will be fine, while minimizing unnecessary
CPU usage.

Fixes: 118d6298 ("net: mvpp2: add ethtool GOP statistics")
Reported-by: Stefan Chulski <stefanc@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Lipeng says:

====================
net: hns3: Bug fixes & Code improvements in HNS3 driver

This patch-set introduces some bug fixes and code improvements.
As [patch 1/2] depends on the patch {5392902d net: hns3: Consistently using
GENMASK in hns3 driver}, which exists in net-next, not exists in net, so
push this serise to nex-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When checking whether auto-negotiation is on, driver only needs to
check the value of mac.autoneg(SW) directly, and does not need to
query it from hardware. Because this value is always synchronized
with the auto-negotiation state of hardware.

This patch removes mac auto-negotiation state query in
hclge_update_speed_duplex().

Fixes: 46a3df9f (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver gets phy address from NCL_config file and uses the phy address
to initialize phydev. There are 5 bits for phy address. And C22 phy
address has 5 bits. So 0-31 are all valid address for phy. If there
is no phy, it will crash. Because driver always get a valid phy address.

This patch fixes the phy address to 8 bits, and use 0xff to indicate
invalid phy address.

Fixes: 46a3df9f (net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support)
Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com>
Signed-off-by: Lipeng <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Attributes using NLA_U* and NLA_S* (where * is 8, 16,32 and 64) are
expected to be an exact length. Split these data types from
nla_attr_minlen into nla_attr_len and update validate_nla to require
the attribute to have exact length for them.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a per-device sysctl to specify the default traffic class to use for
kernel originated IPv6 Neighbour Discovery packets.

Currently this includes:

  - Router Solicitation (ICMPv6 type 133)
    ndisc_send_rs() -> ndisc_send_skb() -> ip6_nd_hdr()

  - Neighbour Solicitation (ICMPv6 type 135)
    ndisc_send_ns() -> ndisc_send_skb() -> ip6_nd_hdr()

  - Neighbour Advertisement (ICMPv6 type 136)
    ndisc_send_na() -> ndisc_send_skb() -> ip6_nd_hdr()

  - Redirect (ICMPv6 type 137)
    ndisc_send_redirect() -> ndisc_send_skb() -> ip6_nd_hdr()

and if the kernel ever gets around to generating RA's,
it would presumably also include:

  - Router Advertisement (ICMPv6 type 134)
    (radvd daemon could pick up on the kernel setting and use it)

Interface drivers may examine the Traffic Class value and translate
the DiffServ Code Point into a link-layer appropriate traffic
prioritization scheme.  An example of mapping IETF DSCP values to
IEEE 802.11 User Priority values can be found here:

    https://tools.ietf.org/html/draft-ietf-tsvwg-ieee-802-11

The expected primary use case is to properly prioritize ND over wifi.

Testing:
  jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  0
  jzem22:~# echo -1 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  -bash: echo: write error: Invalid argument
  jzem22:~# echo 256 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  -bash: echo: write error: Invalid argument
  jzem22:~# echo 0 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# echo 255 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  255
  jzem22:~# echo 34 > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# cat /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  34

  jzem22:~# echo $[0xDC] > /proc/sys/net/ipv6/conf/eth0/ndisc_tclass
  jzem22:~# tcpdump -v -i eth0 icmp6 and src host jzem22.pgc and dst host fe80::1
  tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes
  IP6 (class 0xdc, hlim 255, next-header ICMPv6 (58) payload length: 24)
  jzem22.pgc > fe80::1: [icmp6 sum ok] ICMP6, neighbor advertisement,
  length 24, tgt is jzem22.pgc, Flags [solicited]

(based on original change written by Erik Kline, with minor changes)

v2: fix 'suspicious rcu_dereference_check() usage'
    by explicitly grabbing the rcu_read_lock.

Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Erik Kline <ek@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Several response handlers return EBUSY if the data corresponding to the
command/response pair is already set. There is no reason to return an
error here; the channel is advertising something as enabled because we
told it to enable it, and it's possible that the feature has been
enabled previously.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NCSI driver is mostly silent which becomes a headache when trying to
determine what has occurred on the NCSI connection. This adds additional
logging in a few key areas such as state transitions and calling out
certain errors more visibly.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prashant Bhole says:

====================
tools: bpftool: show filenames of pinned objects

This patchset adds support to show pinned objects in object details.

Patch1 adds a funtionality to open a path in bpf-fs regardless of its object
type.

Patch2 adds actual functionality by scanning the bpf-fs once and adding
object information in hash table, with object id as a key. One object may be
associated with multiple paths because an object can be pinned multiple times

Patch3 adds command line option to enable this functionality. Making it optional
because scanning bpf-fs can be costly.
====================
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>

Making it optional to show file names of pinned objects because
it scans complete bpf-fs filesystem which is costly.
Added option -f|--bpffs. Documentation updated.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added support to show filenames of pinned objects.

For example:

root@test# ./bpftool prog
3: tracepoint  name tracepoint__irq  tag f677a7dd722299a3
    loaded_at Oct 26/11:39  uid 0
    xlated 160B  not jited  memlock 4096B  map_ids 4
    pinned /sys/fs/bpf/softirq_prog

4: tracepoint  name tracepoint__irq  tag ea5dc530d00b92b6
    loaded_at Oct 26/11:39  uid 0
    xlated 392B  not jited  memlock 4096B  map_ids 4,6

root@test# ./bpftool --json --pretty prog
[{
        "id": 3,
        "type": "tracepoint",
        "name": "tracepoint__irq",
        "tag": "f677a7dd722299a3",
        "loaded_at": "Oct 26/11:39",
        "uid": 0,
        "bytes_xlated": 160,
        "jited": false,
        "bytes_memlock": 4096,
        "map_ids": [4
        ],
        "pinned": ["/sys/fs/bpf/softirq_prog"
        ]
    },{
        "id": 4,
        "type": "tracepoint",
        "name": "tracepoint__irq",
        "tag": "ea5dc530d00b92b6",
        "loaded_at": "Oct 26/11:39",
        "uid": 0,
        "bytes_xlated": 392,
        "jited": false,
        "bytes_memlock": 4096,
        "map_ids": [4,6
        ],
        "pinned": []
    }
]

root@test# ./bpftool map
4: hash  name start  flags 0x0
    key 4B  value 16B  max_entries 10240  memlock 1003520B
    pinned /sys/fs/bpf/softirq_map1
5: hash  name iptr  flags 0x0
    key 4B  value 8B  max_entries 10240  memlock 921600B

root@test# ./bpftool --json --pretty map
[{
        "id": 4,
        "type": "hash",
        "name": "start",
        "flags": 0,
        "bytes_key": 4,
        "bytes_value": 16,
        "max_entries": 10240,
        "bytes_memlock": 1003520,
        "pinned": ["/sys/fs/bpf/softirq_map1"
        ]
    },{
        "id": 5,
        "type": "hash",
        "name": "iptr",
        "flags": 0,
        "bytes_key": 4,
        "bytes_value": 8,
        "max_entries": 10240,
        "bytes_memlock": 921600,
        "pinned": []
    }
]
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

This was needed for opening any file in bpf-fs without knowing
its object type
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

Josef Bacik says:

====================
Add the ability to do BPF directed error injection

I'm sending this through Dave since it'll conflict with other BPF changes in his
tree, but since it touches tracing as well Dave would like a review from
somebody on the tracing side.

v4->v5:
- disallow kprobe_override programs from being put in the prog map array so we
  don't tail call into something we didn't check.  This allows us to make the
  normal path still fast without a bunch of percpu operations.

v3->v4:
- fix a build error found by kbuild test bot (I didn't wait long enough
  apparently.)
- Added a warning message as per Daniels suggestion.

v2->v3:
- added a ->kprobe_override flag to bpf_prog.
- added some sanity checks to disallow attaching bpf progs that have
  ->kprobe_override set that aren't for ftrace kprobes.
- added the trace_kprobe_ftrace helper to check if the trace_event_call is a
  ftrace kprobe.
- renamed bpf_kprobe_state to bpf_kprobe_override, fixed it so we only read this
  value in the kprobe path, and thus only write to it if we're overriding or
  clearing the override.

v1->v2:
- moved things around to make sure that bpf_override_return could really only be
  used for an ftrace kprobe.
- killed the special return values from trace_call_bpf.
- renamed pc_modified to bpf_kprobe_state so bpf_override_return could tell if
  it was being called from an ftrace kprobe context.
- reworked the logic in kprobe_perf_func to take advantage of bpf_kprobe_state.
- updated the test as per Alexei's review.

- Original message -

A lot of our error paths are not well tested because we have no good way of
injecting errors generically.  Some subystems (block, memory) have ways to
inject errors, but they are random so it's hard to get reproduceable results.

With BPF we can add determinism to our error injection.  We can use kprobes and
other things to verify we are injecting errors at the exact case we are trying
to test.  This patch gives us the tool to actual do the error injection part.
It is very simple, we just set the return value of the pt_regs we're given to
whatever we provide, and then override the PC with a dummy function that simply
returns.

Right now this only works on x86, but it would be simple enough to expand to
other architectures.  Thanks,
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds a basic test for bpf_override_return to verify it works.  We
override the main function for mounting a btrfs fs so it'll return
-ENOMEM and then make sure that trying to mount a btrfs fs will fail.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Error injection is sloppy and very ad-hoc.  BPF could fill this niche
perfectly with it's kprobe functionality.  We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations.  Accomplish this with the bpf_override_funciton
helper.  This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function.  This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit bcc6d479 ("net: vlan: make non-hw-accel rx path similar
to hw-accel") unified accel and non-accel path for VLAN RX. With that
fix we do not register any packet_type handler for VLANs anymore, so fix
the incorrect comment.
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Manish Kurup says:

====================
net_sched actions: act_vlan now uses RCU

This commit consists of 3 patches:

patch1 (1/3):
The VLAN action maintains one set of stats across all cores, and uses a
spinlock to synchronize updates to it from the same. Changed this to use a
per-CPU stats context instead.
This change will result in better performance.

patch2 (2/3):
Modified netronome nfp flower action to use VLAN helper functions instead
of accessing/referencing TC act_vlan private structures directly.

patch3 (3/3):
Using a spinlock in the VLAN action causes performance issues when the VLAN
action is used on multiple cores. Rewrote the VLAN action to use RCU read
locking for reads and updates instead.
All functions now use an RCU dereferenced pointer to access the VLAN action
context. Modified helper functions used by other modules, to use the RCU as
opposed to directly accessing the structure.

As part of this review, there were some changes suggested by reviewers.
I have incorporated all the changes that were requested.

Here're the changes:
v2: Fixed all helper functions to use RCU (rtnl_dereference) - Eric, Jamal
v2: Fixed indentation, extra line nits - Jamal, Jiri
v2: Moved rcu_head to the end of the struct - Jiri
v2: Re-formatted locals to reverse-christmas-tree - Jiri
v2: Removed mismatched spin_lock() - Cong
v2: Removed spin_lock_bh() in tcf_vlan_init, rtnl_dereference() should
    suffice - Cong, Jiri
v4: Modified the nfp flower action code to use the VLAN helper functions
    instead of referencing the structure directly. Isolated this into a
    separate patch - Pieter Jansen
v5: Got rid of the unlikely() for the allocation case - Simon Horman
v6: Had forgotten cleanup functions for RCU alloc, added them - Dave Miller
v7: Re-formatted more locals to reverse-christmas-tree - Pieter V
v8: Reverted reverse-christmas-tree(v7), not required when dependencies
    make it difficult to implement - Alexander D
v9: Cover letter subject change - Jamal
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Using a spinlock in the VLAN action causes performance issues when the VLAN
action is used on multiple cores. Rewrote the VLAN action to use RCU read
locking for reads and updates instead.
All functions now use an RCU dereferenced pointer to access the VLAN action
context. Modified helper functions used by other modules, to use the RCU as
opposed to directly accessing the structure.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modified netronome nfp flower action to use VLAN helper functions instead
of accessing/referencing TC act_vlan private structures directly.
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Signed-off-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The VLAN action maintains one set of stats across all cores, and uses a
spinlock to synchronize updates to it from the same. Changed this to use a
per-CPU stats context instead.
This change will result in better performance.
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 535a6177 ("sfc: suppress handled MCDI failures when changing the MAC address")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are several pointers that are being assigned but never read
so remove these as they are redundant.  Also remove an assignment
to function_mode that is never read. Cleans up several clang
warnings:

vxge-main.c:1139:2: warning: Value stored to 'hldev' is never read
vxge-main.c:1294:2: warning: Value stored to 'hldev' is never read
vxge-main.c:2188:2: warning: Value stored to 'dev' is never read
vxge-main.c:2188:2: warning: Value stored to 'dev' is never read
vxge-main.c:2723:2: warning: Value stored to 'function_mode' is
never read
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Xin Long says:

====================
ip_gre: add support for i/o_flags update

ip_gre is using as many ip_tunnel apis as possible, newlink works
fine as gre would do it's own part in .ndo_init. But when changing
link, ip_tunnel_changelink doesn't even update i/o_flags, and also
the update of these flags would cause some other gre's properties
need to be updated or recalculated.

These two patch are to add i/o_flags update and then do adjustment
on some gre's properties according to the new i/o_flags.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As patch 'ip_gre: add the support for i/o_flags update via netlink'
did for netlink, we also need to do the same job for these update
via ioctl.

This patch is to update i/o_flags and call ipgre_link_update to
recalculate these gre properties after ip_tunnel_ioctl does the
common update.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now ip_gre is using ip_tunnel_changelink to update it's properties, but
ip_tunnel_changelink in ip_tunnel doesn't update i/o_flags as a common
function.

o_flags updates would cause that tunnel->tun_hlen / hlen and dev->mtu /
needed_headroom need to be recalculated, and dev->(hw_)features need to
be updated as well.

Therefore, we can't just add the update into ip_tunnel_update called
in ip_tunnel_changelink, and it's also better not to touch ip_tunnel
codes.

This patch updates i/o_flags and calls ipgre_link_update to recalculate
these gre properties after ip_tunnel_changelink does the common update.

Note that since ipgre_link_update doesn't know the lower dev, it will
update gre->hlen, dev->mtu and dev->needed_headroom with the value of
'new tun_hlen - old tun_hlen'. In this way, we can avoid many redundant
codes, unlike ip6_gre.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: Namespace-ify sysctl_tcp_rmem and sysctl_tcp_wmem

We need to get per netns sysctl for sysctl_[proto]_rmem and sysctl_[proto]_wmem

This patch series adds the basic infrastructure allowing per proto
conversion, and takes care of TCP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Note that when a new netns is created, it inherits its
sysctl_tcp_rmem and sysctl_tcp_wmem from initial netns.

This change is needed so that we can refine TCP rcvbuf autotuning,
to take RTT into consideration.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As we want to gradually implement per netns sysctl_rmem and sysctl_wmem
on per protocol basis, add two new fields in struct proto,
and two new helpers : sk_get_wmem0() and sk_get_rmem0()

First user will be TCP. Then UDP and SCTP can be easily converted,
while DECNET probably wont get this support.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The software bridge can be build with vlan filtering support
included. However, by default it is turned off. In its turned off
state, it still passes VLANs via switchev, even though they are not to
be used. Don't pass these VLANs to the hardware. Only do so when vlan
filtering is enabled.

This fixes at least one corner case. There are still issues in other
corners, such as when vlan_filtering is later enabled.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2017-11-09

This series introduces vlan offloads related improvements for mlx5
ethernet netdev driver, from Gal Pressman.

 - Add support for 802.1ad vlan filter
 - Add support for 802.1ad vlan insertion
 - Add vlan offloads statistics to ethtool (inserted/stripped vlans)
 - CHECKSUM_COMPLETE support for vlan traffic when vlan stripping is off! (Finally)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
IGMP snooping for local traffic

The linux bridge supports IGMP snooping. It will listen to IGMP
reports on bridge ports and keep track of which groups have been
joined on an interface. It will then forward multicast based on this
group membership.

When the bridge adds or removed groups from an interface, it uses
switchdev to request the hardware add an mdb to a port, so the
hardware can perform the selective forwarding between ports.

What is not covered by the current bridge code, is IGMP joins/leaves
from the host on the brX interface. These are not reported via
switchdev so that hardware knows the local host is interested in the
multicast frames.

Luckily, the bridge does track joins/leaves on the brX interface. The
code is obfusticated, which is why i missed it with my first attempt.
So the first patch tries to remove this obfustication. Currently,
there is no notifications sent when the bridge interface joins a
group. The second patch adds them. bridge monitor then shows
joins/leaves in the same way as for other ports of the bridge.

Then starts the work passing down to the hardware that the host has
joined/left a group. The existing switchdev mdb object cannot be used,
since the semantics are different. The existing
SWITCHDEV_OBJ_ID_PORT_MDB is used to indicate a specific multicast
group should be forwarded out that port of the switch. However here we
require the exact opposite. We want multicast frames for the group
received on the port to the forwarded to the host. Hence add a new
object SWITCHDEV_OBJ_ID_HOST_MDB, a multicast database entry to
forward to the host. This new object is then propagated through the
DSA layers. No DSA driver changes should be needed, this should just
work...

This version fixes up the nitpick from Nikolay, removes an unrelated
white space change, and adds in a patch adding a few const attributes
to a couple of functions taking a port parameter, in order to stop the
following patch produces warnings.
====================
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the host indicates when a multicast group should be forwarded
from the switch to the host, don't do it by default.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The notify mechanism does not need to modify the port it is notifying.
So make the parameter const.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add code to handle switchdev host mdb add/del. Since DSA uses one of
the switch ports as a transport to the host, we just need to add an
MDB on this port.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the host joins or leaves a multicast group, use switchdev to add
an object to the hardware to forward traffic for the group to the
host.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The host can join or leave a multicast group on the brX interface, as
indicated by IGMP snooping.  This is tracked within the bridge
multicast code. Send a notification when this happens, in the same way
a notification is sent when a port of the bridge joins/leaves a group
because of IGMP snooping.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The boolean mglist indicates the host has joined a particular
multicast group on the bridge interface. It is badly named, obscuring
what is means. Rename it.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simple cases of overlapping changes in the packet scheduler.

Must easier to resolve this time.

Which probably means that I screwed it up somehow.
Signed-off-by: David S. Miller <davem@davemloft.net>