- 23 Jun, 2015 13 commits
-
-
Ian Campbell authored
[ Upstream commit 31a41898 ] When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by:
Ian Campbell <ian.campbell@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit beb39db5 ] We have two problems in UDP stack related to bogus checksums : 1) We return -EAGAIN to application even if receive queue is not empty. This breaks applications using edge trigger epoll() 2) Under UDP flood, we can loop forever without yielding to other processes, potentially hanging the host, especially on non SMP. This patch is an attempt to make things better. We might in the future add extra support for rt applications wanting to better control time spent doing a recv() in a hostile environment. For example we could validate checksums before queuing packets in socket receive queue. Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 86e363dc ] For mq qdisc, we add per tx queue qdisc to root qdisc for display purpose, however, that happens too early, before the new dev->qdisc is finally set, this causes q->list points to an old root qdisc which is going to be freed right before assigning with a new one. Fix this by moving ->attach() after setting dev->qdisc. For the record, this fixes the following crash: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 975 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98() list_del corruption. prev->next should be ffff8800d1998ae8, but was 6b6b6b6b6b6b6b6b CPU: 1 PID: 975 Comm: tc Not tainted 4.1.0-rc4+ #1019 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 0000000000000009 ffff8800d73fb928 ffffffff81a44e7f 0000000047574756 ffff8800d73fb978 ffff8800d73fb968 ffffffff810790da ffff8800cfc4cd20 ffffffff814e725b ffff8800d1998ae8 ffffffff82381250 0000000000000000 Call Trace: [<ffffffff81a44e7f>] dump_stack+0x4c/0x65 [<ffffffff810790da>] warn_slowpath_common+0x9c/0xb6 [<ffffffff814e725b>] ? __list_del_entry+0x5a/0x98 [<ffffffff81079162>] warn_slowpath_fmt+0x46/0x48 [<ffffffff81820eb0>] ? dev_graft_qdisc+0x5e/0x6a [<ffffffff814e725b>] __list_del_entry+0x5a/0x98 [<ffffffff814e72a7>] list_del+0xe/0x2d [<ffffffff81822f05>] qdisc_list_del+0x1e/0x20 [<ffffffff81820cd1>] qdisc_destroy+0x30/0xd6 [<ffffffff81822676>] qdisc_graft+0x11d/0x243 [<ffffffff818233c1>] tc_get_qdisc+0x1a6/0x1d4 [<ffffffff810b5eaf>] ? mark_lock+0x2e/0x226 [<ffffffff817ff8f5>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff72e>] ? rtnl_lock+0x17/0x19 [<ffffffff817ff774>] ? __rtnl_unlock+0x17/0x17 [<ffffffff81855dc6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817ff756>] rtnetlink_rcv+0x26/0x2d [<ffffffff818544b2>] netlink_unicast+0xcb/0x150 [<ffffffff81161db9>] ? might_fault+0x59/0xa9 [<ffffffff81854f78>] netlink_sendmsg+0x4fa/0x51c [<ffffffff817d6e09>] sock_sendmsg_nosec+0x12/0x1d [<ffffffff817d8967>] sock_sendmsg+0x29/0x2e [<ffffffff817d8cf3>] ___sys_sendmsg+0x1b4/0x23a [<ffffffff8100a1b8>] ? native_sched_clock+0x35/0x37 [<ffffffff810a1d83>] ? sched_clock_local+0x12/0x72 [<ffffffff810a1fd4>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810def2a>] ? current_kernel_time+0xe/0x32 [<ffffffff810b4bc5>] ? lock_release_holdtime.part.29+0x71/0x7f [<ffffffff810ddebf>] ? read_seqcount_begin.constprop.27+0x5f/0x76 [<ffffffff810b6292>] ? trace_hardirqs_on_caller+0x17d/0x199 [<ffffffff811b14d5>] ? __fget_light+0x50/0x78 [<ffffffff817d9808>] __sys_sendmsg+0x42/0x60 [<ffffffff817d9838>] SyS_sendmsg+0x12/0x1c [<ffffffff81a50e97>] system_call_fastpath+0x12/0x6f ---[ end trace ef29d3fb28e97ae7 ]--- For long term, we probably need to clean up the qdisc_graft() code in case it hides other bugs like this. Fixes: 95dc1929 ("pkt_sched: give visibility to mq slave qdiscs") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
-
Mark Salyzyn authored
[ Upstream commit b48732e4 ] got a rare NULL pointer dereference in clear_bit Signed-off-by:
Mark Salyzyn <salyzyn@android.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> ---- v2: switch to sock_flag(sk, SOCK_DEAD) and added net/caif/caif_socket.c v3: return -ECONNRESET in upstream caller of wait function for SOCK_DEAD Signed-off-by:
-
Richard Cochran authored
[ Upstream commit a935865c ] Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Richard Cochran authored
[ Upstream commit 397a253a ] Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
[ Upstream commit 47cc84ce ] When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Eric W. Biederman authored
[ Upstream commit 381c759d ] ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:
Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
-
Florent Fourcot authored
[ Upstream commit 21858cd0 ] commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Florian Fainelli authored
[ Upstream commit 7e140696 ] RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit 3f7352bf ] x86 has variable length encoding. x86 JIT compiler is trying to pick the shortest encoding for given bpf instruction. While doing so the jump targets are changing, so JIT is doing multiple passes over the program. Typical program needs 3 passes. Some very short programs converge with 2 passes. Large programs may need 4 or 5. But specially crafted bpf programs may hit the pass limit and if the program converges on the last iteration the JIT compiler will be producing an image full of 'int 3' insns. Fix this corner case by doing final iteration over bpf program. Fixes: 0a14842f ("net: filter: Just In Time compiler for x86-64") Reported-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Tested-by:
-
Vlad Yasevich authored
[ Upstream commit d66bf7dd ] The code in __netdev_upper_dev_link() has an over-stringent loop detection logic that actually prevents valid configurations from working correctly. In particular, the logic returns an error if an upper device is already in the list of all upper devices for a given dev. This particular check seems to be a overzealous as it disallows perfectly valid configurations. For example: # ip l a link eth0 name eth0.10 type vlan id 10 # ip l a dev br0 typ bridge # ip l s eth0.10 master br0 # ip l s eth0 master br0 <--- Will fail If you switch the last two commands (add eth0 first), then both will succeed. If after that, you remove eth0 and try to re-add it, it will fail! It appears to be enough to simply check adj_list to keeps things safe. I've tried stacking multiple devices multiple times in all different combinations, and either rx_handler registration prevented the stacking of the device linking cought the error. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Veaceslav Falico <vfalico@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit 45002267 upstream. Crush temporary buffers are allocated as per replica size configured by the user. When there are more final osds (to be selected as per rule) than the replicas, buffer overlaps and it causes crash. Now, it ensures that at most num-rep osds are selected even if more number of osds are allowed by the rule. Reflects ceph.git commits 6b4d1aa99718e3b367496326c1e64551330fabc0, 234b066ba04976783d15ff2abc3e81b6cc06fb10. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
- 06 Jun, 2015 27 commits
-
-
Greg Kroah-Hartman authored
-
Andrew Morton authored
commit 2b1d3ae9 upstream. load_elf_binary() returns `retval', not `error'. Fixes: a87938b2 ("fs/binfmt_elf.c: fix bug in loading of PIE binaries") Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: Michael Davidson <md@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Sasha Levin authored
commit 161f873b upstream. We used to read file_handle twice. Once to get the amount of extra bytes, and once to fetch the entire structure. This may be problematic since we do size verifications only after the first read, so if the number of extra bytes changes in userspace between the first and second calls, we'll have an incoherent view of file_handle. Instead, read the constant size once, and copy that over to the final structure without having to re-read it again. Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Christian König authored
commit 7c0411d2 upstream. We have that bug for years and some users report side effects when fixing it on older hardware. So revert it for VM_CONTEXT0_PAGE_TABLE_END_ADDR, but keep it for VM 1-15. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Christian König authored
commit 607d4806 upstream. The mapping range is inclusive between starting and ending addresses. Signed-off-by:
-
Alex Deucher authored
commit fcf3b542 upstream. Signed-off-by:
-
Rafael J. Wysocki authored
commit b9a5e5e1 upstream. Since acpi_reserve_resources() is defined as a device_initcall(), there's no guarantee that it will be executed in the right order with respect to the rest of the ACPI initialization code. On some systems this leads to breakage if, for example, the address range that should be reserved for the ACPI fixed registers is given to the PCI host bridge instead if the race is won by the wrong code path. Fix this by turning acpi_reserve_resources() into a void function and calling it directly from within the ACPI initialization sequence. Reported-and-tested-by:
George McCollister <george.mccollister@gmail.com> Link: http://marc.info/?t=143092384600002&r=1&w=2Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Mark Hounschell authored
commit 74856fbf upstream. 256 bytes per sector support has been broken since 2.6.X, and no-one stepped up to fix this. So disable support for it. Signed-off-by:
Mark Hounschell <dmarkh@cfl.rr.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit dc45708c upstream. Set the SRB flags correctly when there is no data transfer. Without this change some IHV drivers will fail valid commands such as TEST_UNIT_READY. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
Benjamin Tissoires authored
commit 3c0213d1 upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Larry Finger authored
commit 414b7e3b upstream. The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by:
Bernhard Wiedemann <bwiedemann@suse.com> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Bernhard Wiedemann <bwiedemann@suse.com> Cc: Takashi Iwai<tiwai@suse.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Eric Work authored
commit a8115776 upstream. The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979 restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by:
NeilBrown <neilb@suse.de> Fixes: 47d68979 ("md/raid0: fix bug with chunksize not a power of 2.") URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501Signed-off-by:
-
NeilBrown authored
commit 6e9eac2d upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3 ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by:
-
Jean Delvare authored
Commit 178c2490 ("thermal: step_wise: cdev only needs update on a new target state") broke driver acerhdf. That driver abused the step_wise thermal governor until the bang_bang governor was available, and the optimization broke this usage model. Kernels v3.12 to v3.18 are affected. In v3.19 the acerhdf driver was switched to the bang_bang governor and that solved the problem. For kernels v3.12 to v3.17, the bang_bang governor isn't available yet so the easiest fix is to revert the optimization. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reported-by: Dieter Jurzitza (https://bugzilla.opensuse.org/show_bug.cgi?id=925961) Tested-by:
Peter Feuerer <peter@piie.net> Tested-by: Dieter Jurzitza
-
Scott Mayhew authored
commit 9507271d upstream. In an environment where the KDC is running Active Directory, the exported composite name field returned in the context could be large enough to span a page boundary. Attaching a scratch buffer to the decoding xdr_stream helps deal with those cases. The case where we saw this was actually due to behavior that's been fixed in newer gss-proxy versions, but we're fixing it here too. Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Reviewed-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Mel Gorman authored
commit b0dc2b9b upstream. NUMA balancing is meant to be disabled by default on UMA machines but the check is using nr_node_ids (highest node) instead of num_online_nodes (online nodes). The consequences are that a UMA machine with a node ID of 1 or higher will enable NUMA balancing. This will incur useless overhead due to minor faults with the impact depending on the workload. These are the impact on the stats when running a kernel build on a single node machine whose node ID happened to be 1: vanilla patched NUMA base PTE updates 5113158 0 NUMA huge PMD updates 643 0 NUMA page range updates 5442374 0 NUMA hint faults 2109622 0 NUMA hint local faults 2109622 0 NUMA hint local percent 100 100 NUMA pages migrated 0 0 Signed-off-by:
Mel Gorman <mgorman@suse.de> Reviewed-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Andi Kleen authored
commit 4933f55f upstream. libabikfs.a doesn't exist anymore, so we now need to link with libapi.a. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Russell King authored
commit 1b979372 upstream. Josh Stone reports: I've discovered a case where both arm and arm64 will miss a ptrace syscall-exit that they should report. If the syscall is entered without TIF_SYSCALL_TRACE set, then it goes on the fast path. It's then possible to have TIF_SYSCALL_TRACE added in the middle of the syscall, but ret_fast_syscall doesn't check this flag again. Fix this by always checking for a syscall trace in the fast exit path. Reported-by:
Josh Stone <jistone@redhat.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Philippe Reynes authored
commit a29ef819 upstream. According to the imx27 documentation, fec has a 4 Kbyte memory space map. Moreover, the actual 16 Kbyte mapping overlaps the SCC (Security Controller) memory register space. So, we reduce the memory register space to 4 Kbyte. Signed-off-by:
Philippe Reynes <tremyfr@gmail.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9f0749e3 ("ARM i.MX27: Add devicetree support") Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Janusz Dziedzic authored
commit 47b4e1fc upstream. Remove checking tailroom when adding IV as it uses only headroom, and move the check to the ICV generation that actually needs the tailroom. In other case I hit such warning and datapath don't work, when testing: - IBSS + WEP - ath9k with hw crypt enabled - IPv6 data (ping6) WARNING: CPU: 3 PID: 13301 at net/mac80211/wep.c:102 ieee80211_wep_add_iv+0x129/0x190 [mac80211]() [...] Call Trace: [<ffffffff817bf491>] dump_stack+0x45/0x57 [<ffffffff8107746a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff8107755a>] warn_slowpath_null+0x1a/0x20 [<ffffffffc09ae109>] ieee80211_wep_add_iv+0x129/0x190 [mac80211] [<ffffffffc09ae7ab>] ieee80211_crypto_wep_encrypt+0x6b/0xd0 [mac80211] [<ffffffffc09d3fb1>] invoke_tx_handlers+0xc51/0xf30 [mac80211] [...] Signed-off-by:
Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Harald Freudenberger authored
commit a1cae34e upstream. Multitheaded tests showed that the icv buffer in the current ghash implementation is not handled correctly. A move of this working ghash buffer value to the descriptor context fixed this. Code is tested and verified with an multithreaded application via af_alg interface. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Gerald Schaefer <geraldsc@linux.vnet.ibm.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Michael Brunner authored
commit f230e8ff upstream. This patch fixes an inverted return value of the gpio get_direction function. The wrong value causes the direction sysfs entry and GPIO debugfs file to indicate incorrect GPIO direction settings. In some cases it also prevents setting GPIO output values. The problem is also present in all other stable kernel versions since linux-3.12. Reported-by:
Jochen Henneberg <jh@henneberg-systemdesign.com> Signed-off-by:
Michael Brunner <michael.brunner@kontron.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Scott Branden authored
commit ea345c14 upstream. Add the USB Id to link the D-Link DWA 130 USB Wifi adapter to the rt2830 driver. Signed-off-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
Pieter Truter <ptruter@broadcom.com> Signed-off-by:
-
Gabriele Mazzotta authored
commit 09c5b480 upstream. When the LPM policy is set to ATA_LPM_MAX_POWER, the device might generate a spurious PHY event that cuases errors on the link. Ignore this event if it occured within 10s after the policy change. The timeout was chosen observing that on a Dell XPS13 9333 these spurious events can occur up to roughly 6s after the policy change. Link: http://lkml.kernel.org/g/3352987.ugV1Ipy7Z5@xps13Signed-off-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Gabriele Mazzotta authored
commit 8393b811 upstream. This is a preparation commit that will allow to add other criteria according to which PHY events should be dropped. Signed-off-by:
-
Darrick J. Wong authored
commit e531d0bc upstream. The journal revoke block recovery code does not check r_count for sanity, which means that an evil value of r_count could result in the kernel reading off the end of the revoke table and into whatever garbage lies beyond. This could crash the kernel, so fix that. However, in testing this fix, I discovered that the code to write out the revoke tables also was not correctly checking to see if the block was full -- the current offset check is fine so long as the revoke table space size is a multiple of the record size, but this is not true when either journal_csum_v[23] are set. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Eryu Guan authored
commit 2f974865 upstream. The following commit introduced a bug when checking for zero length extent 5946d089 ext4: check for overlapping extents in ext4_valid_extent_entries() Zero length extent could pass the check if lblock is zero. Adding the explicit check for zero length back. Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
