- 16 Apr, 2024 4 commits
-
-
AngeloGioacchino Del Regno authored
Add mtk_soundcard_pdata platform data for the MediaTek common sound card probe mechanism, including a driver/soc-specific probe extension (used for bits that cannot be commonized hence specific to this driver), and change the probe function to mtk_soundcard_common_probe. This is also adding the possibility of specifying the links and routing with the audio-routing property and (x)-dai-link nodes in device trees to stop hardcoding machine specific links in the card driver assupported by the common probe function, but support for legacy device trees is retained with a legacy_probe function, which is used only in case the new properties are not found. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240416071410.75620-5-angelogioacchino.delregno@collabora.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
AngeloGioacchino Del Regno authored
Add mtk_soundcard_pdata platform data for the MediaTek common sound card probe mechanism, including a driver/soc-specific probe extension (used for bits that cannot be commonized hence specific to this driver), and change the probe function to mtk_soundcard_common_probe. Reviewed-by:
Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by:
-
AngeloGioacchino Del Regno authored
Apart from a dai_link_list variable, the mtk_sof_priv currently holds data that never gets modified during runtime. Constify the mtk_sof_priv structure and move the SOF dai_link_list as sof_dai_link_list in struct mtk_soc_card_data, which is a structure that already holds the card's machine specific, runtime modified data. This allows to safely pass the mtk_sof_priv structure as platform data for the commonized card probe mechanism. Reviewed-by:
-
AngeloGioacchino Del Regno authored
Add a common machine soundcard driver probe function that supports both DSP and AFE-direct usecases and also provides a hook for legacy machine soundcard driver probe mechanisms. Note that the hook is there because, even for legacy probe, a lot of the actual code can still be commonized, hence still reducing duplication for the legacy devicetree retrocompatibility cases. This common probe function deprecates all of the inconsistent previous probe mechanisms and aims to settle all of the MediaTek card drivers on consistent and common devicetree properties describing wanted DAIs, device specific DAI configuration and DAI links to codecs found on each device/board. Reviewed-by:
-
- 15 Apr, 2024 8 commits
-
-
Shengjiu Wang authored
The wm8904 codec is used on an i.MX95 Toradex board. Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1713165456-3494-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
wm8904 codec is used on i.MX95 Toradex board Signed-off-by:
-
John Watts authored
The I2S cores used in the H3 onwards support 32-bit sample rates. Support these by adding a per-variant PCM format list. Signed-off-by:
John Watts <contact@jookia.org> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20240403-sunxi_s32-v2-1-29ebf6ad590a@jookia.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Neither core nor the driver modifes 'struct regulator_ops', so it can be const for code safety. Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20240414164703.239851-1-krzk@kernel.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The ID table already has respective entry and MODULE_DEVICE_TABLE and creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by:
-
Krzysztof Kozlowski authored
The ID table already has respective entry and MODULE_DEVICE_TABLE and creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by:
-
end.to.start authored
Add support microphone from Acer Aspire A315-24P and for some other similar devices with such vendor Signed-off-by:
"end.to.start" <end.to.start@mail.ru> Link: https://lore.kernel.org/r/20240412075533.10214-1-end.to.start@mail.ruSigned-off-by:
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: More cleanups from Brent, notably the removal of the redundant cml_rt1011_rt5682 machine driver, fixes for SoundWire platforms and changes to sof_rt5682 to allow for 96+ sampling rates. For the rest of this kernel cycle, we are still working on SoundWire updates for MeteorLake (usual missing ACPI signature required for topology selection and jack detection information). We'll provide those patches as soon as they are reviewed/validated.
-
- 14 Apr, 2024 16 commits
-
-
Kuninori Morimoto authored
It is missing generic compatible for R-Car Gen4 Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/8734rrcewo.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Add document for R-Car V4M (R8A779H0). Signed-off-by:
-
Dan Carpenter authored
There are two issues here: 1) The get_device() needs a matching put_device() on error paths. 2) The "if (!ret)" was supposed to be "if (ret)". I re-arranged the code a bit to do the allocation before the get_device(). Fixes: ef7784e4 ("ASoC: soc-card: Add KUnit test case for snd_soc_card_get_kcontrol") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/450dd21a-b24b-48ba-9aa4-c02e4617852f@moroto.mountainSigned-off-by:
-
Fabio Estevam authored
Document fsl,imx25-pdk-sgtl5000 to fix the following dt-schema warning: imx25-pdk.dtb: sound: compatible: 'oneOf' conditional failed, one must be fixed: ['fsl,imx25-pdk-sgtl5000', 'fsl,imx-audio-sgtl5000'] is too long Fixes: 4189b542 ("ASoC: dt-bindings: fsl-asoc-card: convert to YAML") Signed-off-by:
Fabio Estevam <festevam@denx.de> Acked-by:
-
Bard Liao authored
When 96KHz sample rate is used, and MCLK is 24.576MHz, we will need pll_in = 24576000 and pll_out = 49152000 which is not supported by RT5682S_PLL2. Use RT5682S_PLL1 in this case. We don't test sample rate because RT5682S_PLL2 doesn't support 24.576MHz input and in the MCLK = 24.576MHz, sample rate = 48KHz case, i.e. pll_in == pll_out, PLL will not be used at all. Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20240411220347.131267-13-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Brent Lu authored
Delete this driver and use sof_rt5682 machine driver instead. Reviewed-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Signed-off-by:
-
Brent Lu authored
For cml boards, ALC1011 speaker amplifier is supported by machine driver cml_rt1011_rt5682. Use same driver name for backward compatibility with existing devices on market. Reviewed-by:
-
Brent Lu authored
Add support for boards with four ALC1011 amplifiers. Configuration is copied from cml_rt1011_rt5682 machine driver for backward compatibility with existing cml devices. Reviewed-by:
-
Brent Lu authored
Add the board config mtl_da7219_def to da7219 machine driver for all mtl boards using default SSP port allocation (headphone codec on SSP2, speaker amplifiers on SSP0, and BT offload on SSP1). Reviewed-by:
-
Brent Lu authored
Add a common entry in enumeration table for all da7219 boards with/without speaker amplifier. All other rpl_da7219_def entries become redundant so get removed. Reviewed-by:
-
Brent Lu authored
Add a common entry in enumeration table for all da7219 boards with/without speaker amplifier. All other adl_da7219_def entries become redundant so get removed. Reviewed-by:
-
Pierre-Louis Bossart authored
This patch removes a confusion between speakers and amplifiers. The existing code keeps track of the number of amplifiers and reports it in the 'cfg-amp' component string. The number of speakers is defined with quirks, but those quirks are not consistently added: in the MeteorLake case, none of the supported platforms used such a quirk, and UCM does not use the values reported anyways. The notion of 'FOUR_SPEAKERS' is also obsolete now with some platforms having more than four speakers. Let's just remove all this and only report the number of amplifiers. Signed-off-by:
-
Pierre-Louis Bossart authored
The JD1 jack detection doesn't seem to work, use JD2. Also use the 4 speaker configuration. Link: https://github.com/thesofproject/linux/issues/4900Signed-off-by:
-
Pierre-Louis Bossart authored
The default JD1 does not seem to work, use JD2 instead. Signed-off-by:
-
Pierre-Louis Bossart authored
This platform has an RT711-sdca on link0 and RT1316 on link3 Closes: https://github.com/thesofproject/linux/issues/4880Signed-off-by:
-
Bard Liao authored
We do need "info->amp_num++;" for the speaker dai. Signed-off-by:
-
- 11 Apr, 2024 2 commits
-
-
Shengjiu Wang authored
Convert the imx-audio-spdif binding to YAML. When testing dtbs_check, found below compatible strings are not listed in document: fsl,imx-sabreauto-spdif fsl,imx6sx-sdb-spdif So add them in yaml file to pass the test. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://msgid.link/r/1712830305-31350-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Colin Ian King authored
Variable ret is being assigned a value that is never read in a couple of places. The variable is being re-assigned later on. The assignments are redundant and can be removed. Cleans up clang scan build warning: sound/soc/codecs/tas2780.c:84:2: warning: Value stored to 'ret' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://msgid.link/r/20240411083332.304887-1-colin.i.king@gmail.comSigned-off-by:
-
- 10 Apr, 2024 2 commits
-
-
Richard Fitzgerald authored
Explicitly #include array_size.h for the source files that use ARRAY_SIZE(). Signed-off-by:
-
Richard Fitzgerald authored
Explicitly #include array_size.h for the ARRAY_SIZE() macro. Signed-off-by:
-
- 09 Apr, 2024 8 commits
-
-
Mark Brown authored
Merge series from Bastien Curutchet <bastien.curutchet@bootlin.com>: This series aims to add some features to McBSP driver. Convert bindings from .txt to .yaml. Add possibility to use an external clock as sample rate generator's input. Add handling of new formats (TDM, S24_LE, BP_FC). Enable the detection of unexpected frame pulses. Set the clock free-running mode according to SND_SOC_DAIFMT_[GATED/CONT] configuration in DAI format. Add ti,T1-framing[tx/rx] properties in DT. They allow to set the data delay to two bit-clock periods. This has been tested on a platform designed off of the DAVINCI/OMAP-L138 connected to 3 daisy-chained AD7767. An external clock drives the sample rate generator through the CLKS pin. The hardware I have only allowed me to test acquisition side of McBSP. It is connected to a 6 channels TDM and acts as Bit clock provider and Frame clock consumer.
-
Mark Brown authored
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: The beginning of the first SRAM window contains various fw registers and additional information which can be very beneficial to read to gather information on the current states to debug issues.
-
Dragan Simic authored
When checking whether the power-down delay should be ignored for a specific PCM runtime, there's no need to keep going through all DAI link components after any of them is found to be configured to use the power-down delay. While there, fix a small typo in one of the comment blocks. Signed-off-by:
Dragan Simic <dsimic@manjaro.org> Link: https://msgid.link/r/90ae761a5b99640ece48363a7099ac2cf402bd37.1712684592.git.dsimic@manjaro.orgSigned-off-by:
-
Vijendar Mukunda authored
The SND_SOC_AMD_SOUNDWIRE Kconfig symbol has build dependency on SOUNDWIRE_AMD. It gets it wrong for a configuration involving SND_SOC_AMD_SOUNDWIRE_LINK_BASELINE=y,SND_SOC_AMD_PS=y and SOUNDWIRE_AMD=m, which results in a link failure: ld: vmlinux.o: in function `amd_sdw_probe': >> sound/soc/amd/ps/pci-ps.c:271:(.text+0x1d51eff): undefined reference to `sdw_amd_probe' ld: vmlinux.o: in function `acp63_sdw_machine_select': >> sound/soc/amd/ps/pci-ps.c:294:(.text+0x1d525d5): undefined reference to `sdw_amd_get_slave_info' ld: vmlinux.o: in function `amd_sdw_exit': >> sound/soc/amd/ps/pci-ps.c:280:(.text+0x1d538ce): undefined reference to `sdw_amd_exit' Add a top level check config that forbids any of the AMD ACP drivers with version >= 6.3 from being built-in with CONFIG_SOUNDWIRE_AMD=m. Move SND_AMD_ACP_CONFIG common dependency config to SND_SOC_AMD_ACP63_TOPLEVEL config. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404061257.khJml82D-lkp@intel.com/ Fixes: a806793f ("ASoC: amd: simplify soundwire dependencies for legacy stack") Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://msgid.link/r/20240408180229.3287220-1-Vijendar.Mukunda@amd.comSigned-off-by:
-
Bastien Curutchet authored
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is used for DSP_B format, 1 is used for DSP_A format, 2 is unused. A data delay of 2 bit clock periods can be used to interface to 'T1 framing' devices where data stream is preceded by a 'framing bit'. On transmission, McBSP inserts a blank period (high-impedance period) before the first data bit to leave an opportunity for other devices to set this 'framing bit'. On reception, McBSP discards the 'framing bit' that precedes the data stream. Add support for the 'framing bit' according to the 'ti,T1-framing-[tx/rx]' device-tree properties. If a flag is present, the data delay is set to 2 bit clock periods regardless of the selected DAI format. Signed-off-by:
Bastien Curutchet <bastien.curutchet@bootlin.com> Acked-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://msgid.link/r/20240402071213.11671-14-bastien.curutchet@bootlin.comSigned-off-by:
-
Bastien Curutchet authored
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is used for DSP_B format, 1 for DSP_A format. A data delay of 2 bit clock periods can be used to interface to 'T1 framing' devices where data stream is preceded by a 'framing bit'. This 2 bit clock data delay is not described in the bindings. Add two flags 'ti,T1-framing-[rx/tx]' to enable a data delay of 2 bit clock periods in reception or transmission. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Bastien Curutchet authored
S24_LE is supported by McBSP but not by the driver. Add S24_LE to driver's supported formats. Using it enables the sign extension in DRR (Data Receive Register). The other formats are kept with the zero extension in DRR. Remove data_type table as it is no longer used. Signed-off-by:
-
Bastien Curutchet authored
McBSP has free-running mode where serial clocks continue to run during emulation halts. This mode is always enabled by the driver. Set free-running mode when SND_SOC_DAIFMT_CONT is selected by DAI format, unset it when SND_SOC_DAIFMT_GATED is selected. Signed-off-by:
-
