- 29 Oct, 2020 4 commits
-
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
First round of drm-misc-fixes with a couple of leftovers from drm-misc-fixes next. Some reset fixes for the mantix panel, some fixes for a scaler issue on sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio related) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.10-2020-10-29' of git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.10-2020-10-29: amdgpu: - Add new navi1x PCI ID - GPUVM reserved area fixes - Misc display fixes - Fix bad interactions between display code and CONFIG_KGDB - Fixes for SMU manual fan control and i2c Signed-off-by:
-
Maxime Ripard authored
Most of the helpers to retrieve vc4 structures from the DRM base structures rely on the fact that the first member of the vc4 structure is the DRM one and just cast the pointers between them. However, this is pretty fragile especially since there's no check to make sure that the DRM structure is indeed at the offset 0 in the structure, so let's use container_of to make it more robust. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201028123752.1733242-1-maxime@cerno.tech
-
Maxime Ripard authored
Since the components for a given device in ASoC are identified by their name, it makes sense to add one even though it's not strictly necessary. Signed-off-by:
-
- 28 Oct, 2020 1 commit
-
-
Daniel Vetter authored
When we forward an mmap to the dma_buf exporter, they get to own everything. Unfortunately drm_gem_mmap_obj() overwrote vma->vm_private_data after the driver callback, wreaking the exporter complete. This was noticed because vb2_common_vm_close blew up on mali gpu with panfrost after commit 26d3ac3c ("drm/shmem-helpers: Redirect mmap for imported dma-buf"). Unfortunately drm_gem_mmap_obj also acquires a surplus reference that we need to drop in shmem helpers, which is a bit of a mislayer situation. Maybe the entire dma_buf_mmap forwarding should be pulled into core gem code. Note that the only two other drivers which forward mmap in their own code (etnaviv and exynos) get this somewhat right by overwriting the gem mmap code. But they seem to still have the leak. This might be a good excuse to move these drivers over to shmem helpers completely. Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Acked-by:
Christian König <christian.koenig@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Russell King <linux+etnaviv@armlinux.org.uk> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Fixes: 26d3ac3c ("drm/shmem-helpers: Redirect mmap for imported dma-buf") Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rob Herring <robh@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: <stable@vger.kernel.org> # v5.9+ Reported-and-tested-by: piotr.oniszczuk@gmail.com Cc: piotr.oniszczuk@gmail.com Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201027214922.3566743-1-daniel.vetter@ffwll.ch
-
- 27 Oct, 2020 12 commits
-
-
Maxime Ripard authored
When running the trigger hook, ALSA by default will take a spinlock, and thus will run the trigger hook in atomic context. However, our HDMI driver will send the infoframes as part of the trigger hook, and part of that process is to wait for a bit to be cleared for up to 100ms. To be nicer to the system, that wait has some usleep_range that interact poorly with the atomic context. There's several ways we can fix this, but the more obvious one is to make ALSA take a mutex instead by setting the nonatomic flag on the DAI link. That doesn't work though, since now the cyclic callback installed by the dmaengine helpers in ALSA will take a mutex, while that callback is run by dmaengine's virt-chan code in a tasklet where sleeping is not allowed either. Given the delay we need to poll the bit for, changing the usleep_range for a udelay and keep running it from a context where interrupts are disabled is not really a good option either. However, we can move the infoframe setup code in the hw_params hook, like is usually done in other HDMI controllers, that isn't protected by a spinlock and thus where we can sleep. Infoframes will be sent on a regular basis anyway, and since hw_params is where the audio parameters that end up in the infoframes are setup, this also makes a bit more sense. Fixes: bb7d7856 ("drm/vc4: Add HDMI audio support") Suggested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20201027101558.427256-1-maxime@cerno.tech
-
Alex Deucher authored
It has been confirmed that the SMU metrics table should always reflect the current fan speed even in manual mode. Fixes: 3033e9f1c2de ("drm/amdgpu/swsmu: handle manual fan readback on SMU11") Reviewed-by:Evan Quan <evan.quan@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Kenneth Feng authored
fix the wrong fan speed in fan1_input when the fan control mode is manual. the fan speed value is not correct when we set manual mode to fan1_enalbe - 1. since the fan speed in the metrics table always reflects the real fan speed,we can fetch the fan speed for both auto and manual mode. Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
Likun Gao <Likun.Gao@amd.com> Signed-off-by:
-
Alex Deucher authored
Stop registering the SMU i2c bus on navi1x. This leads to instability issues when userspace processes mess with the bus and also seems to cause display stability issues in some cases. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1314 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1341Reviewed-by:
-
Hoegeun Kwon authored
There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by:
Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
A kernel-doc markup should start with the identifier on its first line. Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/5b76c5625709aaaa3abee98faa620b9f3d27ff85.1603791716.git.mchehab+huawei@kernel.org
-
Mauro Carvalho Chehab authored
Right now, kernel-doc generates a warning: ./include/drm/drm_dp_helper.h:1786: warning: Function parameter or member 'hbr2_reset' not described in 'drm_dp_phy_test_params' This is due to a typo: @hb2_reset -> @hbr2_reset Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by "make htmldocs": ./drivers/gpu/drm/drm_prime.c:808: warning: Function parameter or member 'dev' not described in 'drm_prime_pages_to_sg' Add a description for the new parameter. Fixes: 707d561f ("drm: allow limiting the scatter list size.") Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
It is not possible to create cross-references for duplicated symbols. While Sphinx always detected it, on Sphinx 3 it generates warnings like this: .../Documentation/gpu/drm-kms-helpers:326: ../drivers/gpu/drm/drm_edid.c:1626: WARNING: Duplicate C declaration, also defined in 'gpu/drm-kms-helpers'. Declaration is 'bool drm_edid_are_equal (const struct edid *edid1, const struct edid *edid2)'. So, get rid of the duplicated kernel-doc markup. Signed-off-by:
-
Mauro Carvalho Chehab authored
The name of the argument is different, causing those warnings: ./drivers/gpu/drm/drm_edid.c:3754: warning: Function parameter or member 'video_code' not described in 'drm_display_mode_from_cea_vic' ./drivers/gpu/drm/drm_edid.c:3754: warning: Excess function parameter 'vic' description in 'drm_display_mode_from_cea_vic' Fixes: 7af655bc ("drm/dp: Add drm_dp_downstream_mode()") Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by kernel-doc: ./drivers/gpu/drm/drm_dp_helper.c:385: warning: Function parameter or member 'type' not described in 'drm_dp_downstream_is_type' ./drivers/gpu/drm/drm_dp_helper.c:886: warning: Function parameter or member 'dev' not described in 'drm_dp_downstream_mode' Some function parameters weren't documented. Fixes: 38784f6f ("drm/dp: Add helpers to identify downstream facing port types") Reviewed-by:
-
Mauro Carvalho Chehab authored
Changeset e5b92773 ("drm: report dp downstream port type as a subconnector property") added a new function to the kAPI, but didn't add any documentation for the parameters for drm_dp_set_subconnector_property(). Fixes: e5b92773 ("drm: report dp downstream port type as a subconnector property") Signed-off-by:
-
- 26 Oct, 2020 16 commits
-
-
Takashi Iwai authored
This patch simplifies the ASSERT*() and BREAK_TO_DEBUGGER() macros: - Move the dependency check of CONFIG_KGDB into Kconfig - Unify the kgdb_breakpoint() call - Drop the non-existing CONFIG_HAVE_KGDB Also align the behavior of ASSERT() macro in both cases with and without CONFIG_DEBUG_KERNEL_DC. Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Takashi Iwai authored
ASSERT_CRITICAL() invokes kgdb_breakpoint() whenever either CONFIG_KGDB or CONFIG_HAVE_KGDB is set. This, however, may lead to a kernel panic when no kdb stuff is attached, since the kgdb_breakpoint() call issues INT3. It's nothing but a surprise for normal end-users. For avoiding the pitfall, make the kgdb_breakpoint() call only when CONFIG_DEBUG_KERNEL_DC is set. https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by:
-
Takashi Iwai authored
Currently both error code paths handled in dal_gpio_open_ex() issues ASSERT_CRITICAL(), and this leads to a kernel panic unnecessarily if CONFIG_KGDB is enabled. Since basically both are non-critical errors and can be recovered, drop those assert calls and use a safer one, BREAK_TO_DEBUGGER(), for allowing the debugging, instead. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1177973 Cc: <stable@vger.kernel.org> Acked-by:
-
Alex Deucher authored
It looks this was accidently lost in a follow up patch. dc context is large and we don't need contiguous pages. Fixes: e4863f11 ("drm/amd/display: Multi display cause system lag on mode change") Reviewed-by:
Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Tested-by:
-
Martin Leung authored
why: oem-related ddc read/write fails without these regs how: copy from hw_factory_dcn20.c Signed-off-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
-
Dmytro Laktyushkin authored
Prevent null pointer access when checking odm tree. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
-
Christian König authored
Ideally this should be a multiple of the VM block size. 2MB should at least fit for Vega/Navi. Signed-off-by:
Madhav Chauhan <madhav.chauhan@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
David Galiffi authored
[why] get_pixel_clk_frequency_100hz is undefined in clock_source_funcs. [how] set function pointer: ".get_pixel_clk_frequency_100hz = get_pixel_clk_frequency_100hz" Signed-off-by:
David Galiffi <David.Galiffi@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by:
-
Madhav Chauhan authored
2MB area is reserved at top inside VM. Suggested-by:
-
Tianci.Yin authored
Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
Tianci.Yin <tianci.yin@amd.com> Signed-off-by:
-
Tianci.Yin authored
The blockchain SKU has no display and video support, remove them. Reviewed-by:
-
Dan Carpenter authored
Originally this error path used to leak "bin" but then we accidentally applied two separate commits to fix it and ended up with a double free. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Maxime Ripard authored
The A33 has a different phase parameter in the Allwinner BSP on the channel1 than the one currently applied. Fix this. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20201015093642.261440-3-maxime@cerno.tech
-
Maxime Ripard authored
When using the scaler on the A10-like frontend with single-planar formats, the current code will setup the channel 0 filter (used for the R or Y component) with a different phase parameter than the channel 1 filter (used for the G/B or U/V components). This creates a bleed out that keeps repeating on of the last line of the RGB plane across the rest of the display. The Allwinner BSP either applies the same phase parameter over both channels or use a separate one, the condition being whether the input format is YUV420 or not. Since YUV420 is both subsampled and multi-planar, and since YUYV is subsampled but single-planar, we can rule out the subsampling and assume that the condition is actually whether the format is single or multi-planar. And it looks like applying the same phase parameter over both channels for single-planar formats fixes our issue, while we keep the multi-planar formats working properly. Reported-by:
Taras Galchenko <tpgalchenko@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The scaler filter phase setup in the allwinner kernel has two different cases for setting up the scaler filter, the first one using different phase parameters for the two channels, and the second one reusing the first channel parameters on the second channel. The allwinner kernel has a third option where the horizontal phase of the second channel will be set to a different value than the vertical one (and seems like it's the same value than one used on the first channel). However, that code path seems to never be taken, so we can ignore it for now, and it's essentially what we're doing so far as well. Since we will have always the same values across each components of the filter setup for a given channel, we can simplify a bit our frontend structure by only storing the phase value we want to apply to a given channel. Signed-off-by:
-
Maxime Ripard authored
We have a few leftovers from the merge window period in drm-misc-next-fixes, let's bring them into drm-misc-fixes Signed-off-by:
-
- 25 Oct, 2020 7 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.plSigned-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.comSigned-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array
-
