The kconfig documentation suggests using plain 'diff' to compare config
files and then adds "Yes, we need something better here".  Commit
a717417e ("kconfig: add diffconfig utility") added what that comment
was looking for.
Signed-off-by: Javi Merino <javi.merino@arm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mach entry in the dontdiff file causes all the
arch/arm/mach-*/include/mach directories to be skipped.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SuperH updates from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: (25 commits)
  sh: Support I/O space swapping where needed.
  sh: use set_current_blocked() and block_sigmask()
  sh: no need to reset handler if SA_ONESHOT
  sh: intc: Fix up section mismatch for intc_ack_data
  sh: select ARCH_DISCARD_MEMBLOCK.
  sh: Consolidate duplicate _32/_64 unistd definitions.
  sh: ecovec: switch SDHI controllers to card polling
  sh: Avoid exporting unimplemented syscalls.
  sh: add platform_device for RSPI in setup-sh7757
  SH: pci-sh7780: enable big-endian operation.
  serial: sh-sci: fix a race of DMA submit_tx on transfer
  sh: dma: Collect up CHCR of SH7763, SH7764, SH7780 and SH7785
  sh: dma: Collect up CHCR of SH7723 and SH7730
  sh/next: Fix build fail by asm/system.h in asm/bitops.h
  arch/sh/drivers/dma/{dma-g2,dmabrg}.c: ensure arguments to request_irq and free_irq are compatible
  sh: cpufreq: Wire up scaling_available_freqs support.
  sh: cpufreq: notify about rate rounding fallback.
  sh: cpufreq: Support CPU clock frequency table.
  sh: cpufreq: struct device lookup from CPU topology.
  sh: cpufreq: percpu struct clk accounting.
  ...

Pull 2nd round of input updates from Dmitry Torokhov:
 - update to Wacom driver to support wireless devices
 - update to Sentelci touchpad driver to support newer hardware
 - update to gpio-keys driver to support "interrupt-only" keys
 - fixups to earlier commits

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - check for allocation failure in probe()
  Input: tegra-kbc - allocate pdata before using it
  Input: amijoy - add missing platform check
  Input: wacom - wireless battery status
  Input: wacom - create inputs when wireless connect
  Input: wacom - wireless monitor framework
  Input: wacom - isolate input registration
  Input: sentelic - improve packet debugging information
  Input: sentelic - minor code cleanup
  Input: sentelic - enabling absolute coordinates output for newer hardware
  Input: sentelic - refactor code for upcoming new hardware support
  Input: gpio_keys - add support for interrupt only keys
  Input: gpio_keys - consolidate key destructor code
  Input: revert "gpio_keys - switch to using threaded IRQs"
  Input: gpio_keys - constify platform data
  Input: spear-keyboard - remove kbd_set_plat_data()

We accidentally removed the check for NULL in 3aac0ef1 "Input: wacom -
isolate input registration".
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Pull urgent cgroup fix from Tejun Heo:
 "Commit 61d1d219 ('cgroup: remove extra calls to
  find_existing_css_set') which was part of the rc1 cgroup pull request
  made writes to the cgroup "tasks" file return an uninitialized retval
  on success which can cause boot failures with systemd.

  The change stayed in linux-next for quite some time but gcc
  interestingly failed to emit warning about using uninitialized
  variable and the problem seems to materialize only for certain build
  combinations (probably depends on register allocation).

  It's just missing local variable initialization and the fix is trivial
  & safe.  As the problem is critical when it materializes, I'm
  fast-tracking it.  Also included is Li's email address change in
  MAINTAINERS."

* 'for-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: cgroup_attach_task() could return -errno after success
  cgroup: update MAINTAINERS entry

61d1d219 "cgroup: remove extra calls to find_existing_css_set" made
cgroup_task_migrate() return void.  An unfortunate side effect was
that cgroup_attach_task() was depending on that function's return
value to clear its @retval on the success path.  On cgroup mounts
without any subsystem with ->can_attach() callback,
cgroup_attach_task() ended up returning @retval without initializing
it on success.

For some reason, gcc failed to warn about it and it didn't cause
cgroup_attach_task() to return non-zero value in many cases, probably
due to difference in register allocation.  When the problem
materializes, systemd fails to populate /systemd cgroup mount and
fails to boot.

Fix it by initializing @retval to zero on declaration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jiri Kosina <jkosina@suse.cz>
LKML-Reference: <alpine.LNX.2.00.1203282354440.25526@pobox.suse.cz>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Acked-by: Li Zefan <lizefan@huawei.com>

Pull arm-soc fixes from Olof Johansson:
 "This is a first pass of some of the merge window fallout for ARM
  platforms.

  Nothing controversial:
   - A system.h fallout fix for OMAP
   - PXA fixes for breakage caused by the regulator struct changes
   - GPIO fixes for OMAP to properly deal with dynamic IRQ allocation
   - A mismerge in our arm-soc tree of an lpc32xx change for networking
   - A fix for USB setup on tegra
   - An undo of __init annotation of display mux setup on OMAP that's
     needed at runtime"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: pxa: fix build issue on stargate2
  ARM: pxa: fix build issue on cm-x300
  ARM: pxa: fix build failure for regulator consumer in em-x270.c
  ARM: LPC32xx: clock.c: Fix lpc-eth clock reference
  ARM: OMAP: pm: fix compilation break
  ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition
  drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()
  ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()
  ARM: pxa: fix regulator related build fail in magician_defconfig
  ARM: tegra: Fix device tree AUXDATA for USB/EHCI
  ARM: OMAP2+: Remove __init from DSI mux functions

* 'fixes' of git://github.com/hzhuang1/linux:
  ARM: pxa: fix build issue on stargate2
  ARM: pxa: fix build issue on cm-x300
  ARM: pxa: fix build failure for regulator consumer in em-x270.c
  ARM: pxa: fix regulator related build fail in magician_defconfig

Pull devicetree documentation update from Grant Likely.

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  dt: Linux DT usage model documentation
  mtd: Move fdt partition documentation to a seperate file

Pull x86 cleanups from Peter Anvin:
 "The biggest textual change is the cleanup to use symbolic constants
  for x86 trap values.

  The only *functional* change and the reason for the x86/x32 dependency
  is the move of is_ia32_task() into <asm/thread_info.h> so that it can
  be used in other code that needs to understand if a system call comes
  from the compat entry point (and therefore uses i386 system call
  numbers) or not.  One intended user for that is the BPF system call
  filter.  Moving it out of <asm/compat.h> means we can define it
  unconditionally, returning always true on i386."

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Move is_ia32_task to asm/thread_info.h from asm/compat.h
  x86: Rename trap_no to trap_nr in thread_struct
  x86: Use enum instead of literals for trap values

v2: 2nd draft
 - Editorial cleanups (Randy Dunlap and Stephen Warren)
 - Added missing Microblaze reference (Stephen Neuendorffer)
 - Make example of platform_device creation clearer (Shawn Guo)
 - Expand on PowerPC history and mention i2c mess (David Gibson)
 - convert to plain text (remove bits of html formating)
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

Pull x32 support for x86-64 from Ingo Molnar:
 "This tree introduces the X32 binary format and execution mode for x86:
  32-bit data space binaries using 64-bit instructions and 64-bit kernel
  syscalls.

  This allows applications whose working set fits into a 32 bits address
  space to make use of 64-bit instructions while using a 32-bit address
  space with shorter pointers, more compressed data structures, etc."

Fix up trivial context conflicts in arch/x86/{Kconfig,vdso/vma.c}

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
  x32: Fix alignment fail in struct compat_siginfo
  x32: Fix stupid ia32/x32 inversion in the siginfo format
  x32: Add ptrace for x32
  x32: Switch to a 64-bit clock_t
  x32: Provide separate is_ia32_task() and is_x32_task() predicates
  x86, mtrr: Use explicit sizing and padding for the 64-bit ioctls
  x86/x32: Fix the binutils auto-detect
  x32: Warn and disable rather than error if binutils too old
  x32: Only clear TIF_X32 flag once
  x32: Make sure TS_COMPAT is cleared for x32 tasks
  fs: Remove missed ->fds_bits from cessation use of fd_set structs internally
  fs: Fix close_on_exec pointer in alloc_fdtable
  x32: Drop non-__vdso weak symbols from the x32 VDSO
  x32: Fix coding style violations in the x32 VDSO code
  x32: Add x32 VDSO support
  x32: Allow x32 to be configured
  x32: If configured, add x32 system calls to system call tables
  x32: Handle process creation
  x32: Signal-related system calls
  x86: Add #ifdef CONFIG_COMPAT to <asm/sys_ia32.h>
  ...

arch/arm/mach-pxa/stargate2.c:155:3: error: unknown field ‘dev’
specified in initializer
arch/arm/mach-pxa/stargate2.c:155:3: warning: initialization from
incompatible pointer type [enabled by default]
arch/arm/mach-pxa/stargate2.c:155:3: warning: (near initialization for
‘stargate2_sensor_3_con[0].dev_name’) [enabled by default]
make[1]: *** [arch/arm/mach-pxa/stargate2.o] Error 1
make: *** [arch/arm/mach-pxa] Error 2

It's caused by 'dev' field removed from struct
regulator_consumer_supply.
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

arch/arm/mach-pxa/cm-x300.c:716:3: error: unknown field ‘dev’ specified
in initializer
make[1]: *** [arch/arm/mach-pxa/cm-x300.o] Error 1
make: *** [arch/arm/mach-pxa] Error 2

It's caused by 'dev' field removed from struct
regulator_consumer_supply.
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

Pull "ARM: cleanups of io includes" from Olof Johansson:
 "Rob Herring has done a sweeping change cleaning up all of the
  mach/io.h includes, moving some of the oft-repeated macros to a common
  location and removing a bunch of boiler plate.  This is another step
  closer to a common zImage for multiple platforms."

Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).

* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
  ARM: tegra: Include assembler.h in sleep.S to fix build break
  ARM: pxa: use common IOMEM definition
  ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
  ARM: __io abuse cleanup
  ARM: create a common IOMEM definition
  ARM: iop13xx: fix missing declaration of iop13xx_init_early
  ARM: fix ioremap/iounmap for !CONFIG_MMU
  ARM: kill off __mem_pci
  ARM: remove bunch of now unused mach/io.h files
  ARM: make mach/io.h include optional
  ARM: clps711x: remove unneeded include of mach/io.h
  ARM: dove: add explicit include of dove.h to addr-map.c
  ARM: at91: add explicit include of hardware.h to uncompressor
  ARM: ep93xx: clean-up mach/io.h
  ARM: tegra: clean-up mach/io.h
  ARM: orion5x: clean-up mach/io.h
  ARM: davinci: remove unneeded mach/io.h include
  [media] davinci: remove includes of mach/io.h
  ARM: OMAP: Remove remaining includes for mach/io.h
  ARM: msm: clean-up mach/io.h
  ...

Commit 737f360d

"regulator: Remove support for supplies specified by struct device"

caused this file to break, since it was still relying on the
device field to be present.  Map it onto dev_name appropriately

Since there are two consumers with the name "reg-userspace-consumer",
we have to supply the ID as a suffix in the REGULATOR_CONSUMER calls.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

This reverts commit b43d17f3.

Dave Jones reports that it causes lockups on his laptop, and his debug
output showed a lot of processes hung waiting for page_writeback (or
more commonly - processes hung waiting for a lock that was held during
that writeback wait).

The page_writeback hint made Ted suggest that Dave look at this commit,
and Dave verified that reverting it makes his problems go away.

Ted says:
 "That commit fixes a race which is seen when you write into fallocated
  (and hence uninitialized) disk blocks under *very* heavy memory
  pressure.  Furthermore, although theoretically it could trigger under
  normal direct I/O writes, it only seems to trigger if you are issuing
  a huge number of AIO writes, such that a just-written page can get
  evicted from memory, and then read back into memory, before the
  workqueue has a chance to update the extent tree.

  This race has been around for a little over a year, and no one noticed
  until two months ago; it only happens under fairly exotic conditions,
  and in fact even after trying very hard to create a simple repro under
  lab conditions, we could only reproduce the problem and confirm the
  fix on production servers running MySQL on very fast PCIe-attached
  flash devices.

  Given that Dave was able to hit this problem pretty quickly, if we
  confirm that this commit is at fault, the only reasonable thing to do
  is to revert it IMO."
Reported-and-tested-by: Dave Jones <davej@redhat.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more ARM updates from Russell King.

This got a fair number of conflicts with the <asm/system.h> split, but
also with some other sparse-irq and header file include cleanups.  They
all looked pretty trivial, though.

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits)
  ARM: fix Kconfig warning for HAVE_BPF_JIT
  ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds
  ARM: 7349/1: integrator: convert to sparse irqs
  ARM: 7259/3: net: JIT compiler for packet filters
  ARM: 7334/1: add jump label support
  ARM: 7333/2: jump label: detect %c support for ARM
  ARM: 7338/1: add support for early console output via semihosting
  ARM: use set_current_blocked() and block_sigmask()
  ARM: exec: remove redundant set_fs(USER_DS)
  ARM: 7332/1: extract out code patch function from kprobes
  ARM: 7331/1: extract out insn generation code from ftrace
  ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format
  ARM: 7351/1: ftrace: remove useless memory checks
  ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path
  ARM: Versatile Express: add NO_IOPORT
  ARM: get rid of asm/irq.h in asm/prom.h
  ARM: 7319/1: Print debug info for SIGBUS in user faults
  ARM: 7318/1: gic: refactor irq_start assignment
  ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop
  ARM: 7315/1: perf: add support for the Cortex-A7 PMU
  ...

Pull cpupower updates from Dominik Brodowski.

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/cpupowerutils:
  cpupower tools: add install target to the debug tools' makefiles
  cpupower tools: allow to build debug tools in a separate directory too
  cpupower: Fix broken mask values
  cpupower tool: allow to build in a separate directory
  cpupower tool: makefile: simplify the recipe used to generate cpupower.pot target
  cpupower tool: remove use of undefined variables from the clean target of the top makefile
  cpupower: Fix linking with --as-needed
  cpupower: Remove unneeded code and by that fix a memleak
  cpupower: Fix number of idle states
  cpupower: Unify cpupower-frequency-* manpages
  cpupower: Add cpupower-idle-info manpage
  cpupower: AMD fam14h/Ontario monitor can also be used by fam12h cpus
  cpupower: Better interface for accessing AMD pci registers

Pull a few PCMCIA updates from Dominik Brodowski.

Fix up trivial conflict (modified code in question had been removed) in
drivers/pcmcia/soc_common.c.

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia:
  pcmcia at91_cf: fix raw gpio number usage
  ARM: pxa: fix error handling in pxa2xx_drv_pcmcia_probe
  pcmcia: Convert to DEFINE_PCI_DEVICE_TABLE
  pcmcia: convert drivers/pcmcia/* to use module_platform_driver()
  pcmcia: irq: Remove IRQF_DISABLED

Pull slave-dmaengine update from Vinod Koul:
 "This includes the cookie cleanup by Russell, the addition of context
  parameter for dmaengine APIs, more arm dmaengine driver cleanup by
  moving code to dmaengine, this time for imx by Javier and pl330 by
  Boojin along with the usual driver fixes."

Fix up some fairly trivial conflicts with various other cleanups.

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits)
  dmaengine: imx: fix the build failure on x86_64
  dmaengine: i.MX: Fix merge of cookie branch.
  dmaengine: i.MX: Add support for interleaved transfers.
  dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages.
  dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'.
  dmaengine: imx-dma: remove unused arg of imxdma_sg_next.
  dmaengine: imx-dma: remove internal structure.
  dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure.
  dmaengine: imx-dma: remove 'in_use' field of 'internal' structure.
  dmaengine: imx-dma: remove sg member from internal structure.
  dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function.
  dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function.
  dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function.
  dmaengine: imx-dma: remove dma_mode member of internal structure.
  dmaengine: imx-dma: remove data member from internal structure.
  dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c
  dmaengine: at_hdmac: add slave config operation
  dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic
  dmaengine/dma_slave: introduce inline wrappers
  dma: imx-sdma: Treat firmware messages as warnings instead of erros
  ...

Pull nfsd changes from Bruce Fields:

Highlights:
 - Benny Halevy and Tigran Mkrtchyan implemented some more 4.1 features,
   moving us closer to a complete 4.1 implementation.
 - Bernd Schubert fixed a long-standing problem with readdir cookies on
   ext2/3/4.
 - Jeff Layton performed a long-overdue overhaul of the server reboot
   recovery code which will allow us to deprecate the current code (a
   rather unusual user of the vfs), and give us some needed flexibility
   for further improvements.
 - Like the client, we now support numeric uid's and gid's in the
   auth_sys case, allowing easier upgrades from NFSv2/v3 to v4.x.

Plus miscellaneous bugfixes and cleanup.

Thanks to everyone!

There are also some delegation fixes waiting on vfs review that I
suppose will have to wait for 3.5.  With that done I think we'll finally
turn off the "EXPERIMENTAL" dependency for v4 (though that's mostly
symbolic as it's been on by default in distro's for a while).

And the list of 4.1 todo's should be achievable for 3.5 as well:

   http://wiki.linux-nfs.org/wiki/index.php/Server_4.0_and_4.1_issues

though we may still want a bit more experience with it before turning it
on by default.

* 'for-3.4' of git://linux-nfs.org/~bfields/linux: (55 commits)
  nfsd: only register cld pipe notifier when CONFIG_NFSD_V4 is enabled
  nfsd4: use auth_unix unconditionally on backchannel
  nfsd: fix NULL pointer dereference in cld_pipe_downcall
  nfsd4: memory corruption in numeric_name_to_id()
  sunrpc: skip portmap calls on sessions backchannel
  nfsd4: allow numeric idmapping
  nfsd: don't allow legacy client tracker init for anything but init_net
  nfsd: add notifier to handle mount/unmount of rpc_pipefs sb
  nfsd: add the infrastructure to handle the cld upcall
  nfsd: add a header describing upcall to nfsdcld
  nfsd: add a per-net-namespace struct for nfsd
  sunrpc: create nfsd dir in rpc_pipefs
  nfsd: add nfsd4_client_tracking_ops struct and a way to set it
  nfsd: convert nfs4_client->cl_cb_flags to a generic flags field
  NFSD: Fix nfs4_verifier memory alignment
  NFSD: Fix warnings when NFSD_DEBUG is not defined
  nfsd: vfs_llseek() with 32 or 64 bit offsets (hashes)
  nfsd: rename 'int access' to 'int may_flags' in nfsd_open()
  ext4: return 32/64-bit dir name hash according to usage type
  fs: add new FMODE flags: FMODE_32bithash and FMODE_64bithash
  ...

Pull arch/tile (really asm-generic) update from Chris Metcalf:
 "These are a couple of asm-generic changes that apply to tile."

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  compat: use sys_sendfile64() implementation for sendfile syscall
  [PATCH v3] ipc: provide generic compat versions of IPC syscalls

Pull scheduler fixes from Ingo Molnar.

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpusets: Remove an unused variable
  sched/rt: Improve pick_next_highest_task_rt()
  sched: Fix select_fallback_rq() vs cpu_active/cpu_online
  sched/x86/smp: Do not enable IRQs over calibrate_delay()
  sched: Fix compiler warning about declared inline after use
  MAINTAINERS: Update email address for SCHEDULER and PERF EVENTS

Pull x86 updates from Ingo Molnar.

This touches some non-x86 files due to the sanitized INLINE_SPIN_UNLOCK
config usage.

Fixed up trivial conflicts due to just header include changes (removing
headers due to cpu_idle() merge clashing with the <asm/system.h> split).

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/amd: Be more verbose about LVT offset assignments
  x86, tls: Off by one limit check
  x86/ioapic: Add io_apic_ops driver layer to allow interception
  x86/olpc: Add debugfs interface for EC commands
  x86: Merge the x86_32 and x86_64 cpu_idle() functions
  x86/kconfig: Remove CONFIG_TR=y from the defconfigs
  x86: Stop recursive fault in print_context_stack after stack overflow
  x86/io_apic: Move and reenable irq only when CONFIG_GENERIC_PENDING_IRQ=y
  x86/apic: Add separate apic_id_valid() functions for selected apic drivers
  locking/kconfig: Simplify INLINE_SPIN_UNLOCK usage
  x86/kconfig: Update defconfigs
  x86: Fix excessive MSR print out when show_msr is not specified

Pull timer core updates from Thomas Gleixner.

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ia64: vsyscall: Add missing paranthesis
  alarmtimer: Don't call rtc_timer_init() when CONFIG_RTC_CLASS=n
  x86: vdso: Put declaration before code
  x86-64: Inline vdso clock_gettime helpers
  x86-64: Simplify and optimize vdso clock_gettime monotonic variants
  kernel-time: fix s/then/than/ spelling errors
  time: remove no_sync_cmos_clock
  time: Avoid scary backtraces when warning of > 11% adj
  alarmtimer: Make sure we initialize the rtctimer
  ntp: Fix leap-second hrtimer livelock
  x86, tsc: Skip refined tsc calibration on systems with reliable TSC
  rtc: Provide flag for rtc devices that don't support UIE
  ia64: vsyscall: Use seqcount instead of seqlock
  x86: vdso: Use seqcount instead of seqlock
  x86: vdso: Remove bogus locking in update_vsyscall_tz()
  time: Remove bogus comments
  time: Fix change_clocksource locking
  time: x86: Fix race switching from vsyscall to non-vsyscall clock

Fix this build error on ia64:

  In file included from include/linux/sched.h:92,
                  from arch/ia64/kernel/asm-offsets.c:9:
  include/linux/llist.h:59:25: error: asm/cmpxchg.h: No such file or directory
  make[1]: *** [arch/ia64/kernel/asm-offsets.s] Error 1

Right now we don't seem to need any actual contents for the
asm/cmpxchg.h to make the build work ...  so leave the migration of
xchg() and cmpxchg() to this new header file for a future patch.

Also process.c needs <asm/switch_to.h> (for definition of pfm_syst_info).
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull the code to generalize the powerpc VIRQ_DEBUG code from Grant Likely.

That code had been moved into generic irqdomain code, but still had
powerpc-specific code and could only be enabled on powerpc.

* 'irqdomain/merge' of git://git.secretlab.ca/git/linux-2.6:
  irqdomain/powerpc: updated defconfigs for VIRQ_DEBUG rename
  irqdomain: Remove powerpc dependency from debugfs file

Single fix for a commit from the first batch of patches through Andrew.

* emailed from Andrew Morton <akpm@linux-foundation.org>:
  pagemap: remove remaining unneeded spin_lock()

Commit 025c5b24 ("thp: optimize away unnecessary page table
locking") moves spin_lock() into pmd_trans_huge_lock() in order to avoid
locking unless pmd is for thp.  So this spin_lock() is a bug.
Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

The debugfs code is really generic for all platforms.  This patch removes the
powerpc-specific directory reference and makes it available to all
architectures.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

From Tony Lindgren:
"This contains the updated gpio_to_irq patches from Tarun, and a trivial
build fix from Govindraj to #include <asm/system_misc.h> in pm.c.
The DSI mux patch is the same."

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: pm: fix compilation break
  ARM: OMAP: Remove OMAP_GPIO_IRQ macro definition
  drivers: input: Fix OMAP_GPIO_IRQ with gpio_to_irq() in ams_delta_serio_exit()
  ARM: OMAP: boards: Fix OMAP_GPIO_IRQ usage with gpio_to_irq()
  ARM: OMAP2+: Remove __init from DSI mux functions

Pull the intel i915 hibernation memory corruption fix from Dave Airlie:
 "I tracked down the misc memory corruption after i915 hibernate to the
  blinking fbcon cursor, and realised the i915 driver wasn't doing the
  fbdev suspend/resume calls at all.  nouveau and radeon have done these
  calls for a long time.

  This has been fairly well tested and is definitely the main culprit in
  hibernate not working."

Yay.

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: suspend fbdev device around suspend/hibernate

Merge branch 'for-3.4/fixes-for-rc1-and-v3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into fixes

* 'for-3.4/fixes-for-rc1-and-v3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: Fix device tree AUXDATA for USB/EHCI

During a complex merge for v3.4, one line of the commit
c20b909b ("ARM: LPC32xx: Ethernet support") was
reverted wrongly ("lpc-eth.0" -> "lpc-net.0") while the other conflicts were
merged correctly. This patch re-applies the clock name "lpc-eth.0".
Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Conflicts:
	arch/arm/mach-omap1/board-htcherald.c
	arch/arm/mach-omap2/board-rx51-peripherals.c
	arch/arm/plat-omap/include/plat/gpio.h
	drivers/input/serio/ams_delta_serio.c

Fix the compilation break observed on latest mainline caused
by 9f97da78 (Disintegrate asm/system.h for ARM):

arch/arm/mach-omap1/pm.c: In function 'omap_pm_prepare':
arch/arm/mach-omap1/pm.c:587: error: implicit declaration of function 'disable_hlt'
arch/arm/mach-omap1/pm.c: In function 'omap_pm_finish':
arch/arm/mach-omap1/pm.c:624: error: implicit declaration of function 'enable_hlt'
arch/arm/mach-omap1/pm.c: In function 'omap_pm_init':
arch/arm/mach-omap1/pm.c:681: error: 'arm_pm_idle' undeclared (first use in this function)
...

arch/arm/mach-omap2/pm.c: In function 'omap_pm_begin':
arch/arm/mach-omap2/pm.c:239: error: implicit declaration of function 'disable_hlt'
arch/arm/mach-omap2/pm.c: In function 'omap_pm_end':
arch/arm/mach-omap2/pm.c:247: error: implicit declaration of function 'enable_hlt'
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Kevin Hilman <khilman@ti.com>
[tony@atomide.com: updated to fix omap1 too]
Signed-off-by: Tony Lindgren <tony@atomide.com>