ALSA sequencer
- fixed the race conditions.

Digigram VX core
Alain Cretet <cretet@digigram.com>:
- fixed the 24bit mono recording.

Digigram VX core
Alain Cretet <cretet@digigram.com>:
- fixed the missing input VU meter.

USB generic driver
Clemens Ladisch <clemens@ladisch.de>:
Terratec PHASE 26 MIDI support

AC97 Codec Core
Clemens Ladisch <clemens@ladisch.de>:
added AD1888 support.

AC97 Codec Core
- fix for AD1885
  - set the default MISC register value.
  - disabled 'digital audio mode', which seems problematic on many boards.

VIA82xx driver
- changed the default DXS of GA-7VAXP to NO_VRA.

Intel8x0 driver
- return with IRQ_RETVAL() for the unknown IRQ bits (often found on nForce2)
  with debug messages.

ICE1712 driver,ICE1724 driver
- added the support of independent surround PCM for ice1724.

Digigram VX core
- fixed another wrong lock.

Documentation,ALSA Core,PCI drivers,MIXART driver,IGNORE
- added snd-mixart driver for Digigram miXart boards.

Digigram VX core
- fixed the wrong lock (bug #2052) - use spin_lock_irqsave() now.

USB generic driver
- assign PCM unique (sub)streams for each USB format type.
  this will avoid the mix up of format I and format III on M-audio transit.

AC97 Codec Core
- fixed the detection of surround/LFE VRA on ALC650.

AC97 Codec Core
- fixed the mic gpio switch handling on the old ALC650.
- fixed the wrong register initialization on ALC655/658.

Intel8x0 driver
- added the ac97 quirk for Intel D845WN (82801BA)

into kernel.bkbits.net:/home/davem/net-2.6

pktsched_init() and tc_filter_init() converted to subsys_initcall().
initialization of individual qdisc and tcf_proto switched to
module_init().  Some of them used to be registered twice if built-in, BTW.
init failure handling in sch_teql.c fixed - it used to leave objects
(both qdisc and netdev) registered if insmod failed.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

From: Ralf Baechle <ralf@linux-mips.org>

Below following 125547 lines of patches, all to arch/mips and
include/asm-mips.  I'm going to send the remaining stuff of which the one
or other bit may need to be discussed in smaller bits.

into ppc970.osdl.org:/home/torvalds/v2.5/linux

into debian.org:/usr/src/kernel/ieee1394-2.6

into ppc970.osdl.org:/home/torvalds/v2.5/linux

Patch from Holger Schurig

PXA Serial port (FFUART, BTUART, STUART) and console support 
 
This patch works perfectly here with "console=ttyS0,115200" in the 
kernel command line. It contains Jean-frederic Clere fix to detect 
STUART and BTUART.

Nico said that I should post it to your patch tracker. It replaces patch 1662/1

into ppc970.osdl.org:/home/torvalds/v2.5/linux

Update the Acorn VIDC sound interrupt handler to return IRQ_HANDLED.

Unfortunately some i2c drivers were missed when the "name" element of
struct device was removed.  This cset fixes these drivers.

Patch from Deepak Saxena

Follows your suggestion and also removes the #ifdef around
pci_unmap_addr and friends. Since pci.h should only be getting
included if PCI is enabled by PCI drivers and core, we shouldn't
need the NOP version.

Patch from Tony Lindgren

The following patch adds the ARM925 processor support.

This patch is based on the proc-arm925.S in 2.4 kernel, and it has been
modified to be more like the ARM926 support in the 2.6 kernel, except for
the cache flushing and initialization. Also, this patch fixes the
writeback cache flushing for most part.

There are still some issues with writeback cache flushing with devices 
using direct memory access, such as USB OHCI. It is recommended to use
the writethrough instead if using USB. This is the default for OMAP-1510.
OMAP-1610 does not have these issues, as it uses ARM926 core.

This patch includes the update for the processor functions to be armv4t 
instead armv5t as suggested here:

http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=1740/1

into nuts.davemloft.net:/disk1/BK/net-2.6

- Update listhelp.h to benefit from prefetching
- More efficient selective_cleanup() impl. in conntrack
- Export number of conntrack buckets via r/o sysctl.

From David Miller.

Don't list icside.o in drivers/ide/pci/Makefile - it's in drivers/ide/arm.

into ppc970.osdl.org:/home/torvalds/v2.5/linux