- 27 Jul, 2024 5 commits
-
-
Ben Skeggs authored
There's various different places in the drm code that get at the nvkm_device via various creative (and not very type-safe) means. One of those being via nvif_device.object.priv. Another patch series is going to entirely remove the ioctl-like interfaces beween the drm code and nvkm, and that field will no longer exist. This provides a safer replacement for accessing the nvkm_device, and will used more in upcoming patches to cleanup other cases. v2: - fixup printk macros to not oops if used before client ctor Signed-off-by:
Ben Skeggs <bskeggs@nvidia.com> Signed-off-by:
Danilo Krummrich <dakr@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240726043828.58966-6-bskeggs@nvidia.com
-
Ben Skeggs authored
HW isn't touched anymore (aside from detection) until the first nvif_device has been allocated, so we no longer need a separate probe-only step before kicking efifb (etc) off the HW. Signed-off-by:
-
Ben Skeggs authored
We almost always want to cast the pointer from dev_get_drvdata() to 'struct nouveau_drm *', so just directly store that pointer instead, simplifying callers, and fixing some clumsy naming of dev/drm_dev variables at the same time. Signed-off-by:
-
Ben Skeggs authored
Unify some more of the PCI/Tegra DRM driver init, both as a general cleanup, and because a subsequent commit changes the pointer stored via dev_set_drvdata(), and this allows the change to be made in one place. Signed-off-by:
-
Ben Skeggs authored
The next commit wants to be able to call fini() from an init() failure path to remove the need to duplicate a bunch of cleanup. Moving fini() above init() avoids the need for a forward-declaration. Signed-off-by:
-
- 26 Jul, 2024 4 commits
-
-
Hamza Mahfooz authored
We would like to be able to enable vblank_disable_immediate unconditionally, however there are a handful of cases where a small off delay is necessary (e.g. with PSR enabled). So, we would like to be able to adjust the vblank off delay and disable imminent values dynamically for a given CRTC. Since, it will allow drivers to apply static screen optimizations more quickly and consequently allow users to benefit more so from the power savings afforded by the aforementioned optimizations, while avoiding issues in cases where an off delay is still warranted. In particular, the PSR case requires a small off delay of 2 frames, otherwise display firmware isn't able to keep up with all of the requests made to amdgpu. So, introduce drm_crtc_vblank_on_config() which is like drm_crtc_vblank_on(), but it allows drivers to specify the vblank CRTC configuration before enabling vblanking support for a given CRTC. Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20240725205109.209743-1-hamza.mahfooz@amd.com
-
Haikun Zhou authored
Add support for the CSW MNB601LS1-4, pleace the EDID here for subsequent reference. 00 ff ff ff ff ff ff 00 0e 77 04 11 00 00 00 00 00 22 01 04 a5 1a 0e 78 03 a1 35 9b 5e 58 91 25 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 09 1e 56 dc 50 00 28 30 30 20 36 00 00 90 10 00 00 1a 00 00 00 fd 00 28 3c 30 30 08 01 0a 20 20 20 20 20 20 00 00 00 fe 00 43 53 4f 54 20 54 39 0a 20 20 20 20 20 00 00 00 fe 00 4d 4e 42 36 30 31 4c 53 31 2d 34 0a 20 00 20 Signed-off-by:
Haikun Zhou <zhouhaikun5@huaqin.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Zenghui Yu authored
The partition device ioctl was removed during the development of the initial version of qaic driver. Remove its description from the documentation to avoid confusing readers. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by:
-
Deborah Brouwer authored
Before building an image, the build script looks to see if there are fixes to apply from an upstream repository. The link for the upstream repository git://anongit.freedesktop.org/drm/drm became obsolete with the move to Gitlab server in March 2024. Until recently, this obsolete link was harmless because anongit would at least respond that there were no such fixes available. In the last few days anongit has stopped responding to requests causing the build script to hang indefinitely. Update the link from anongit to the Gitlab server to prevent the build script from hanging indefinitely. Signed-off-by:
Deborah Brouwer <deborah.brouwer@collabora.com> Reviewed-by:
Daniel Stone <daniels@collabora.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
- 25 Jul, 2024 6 commits
-
-
Cong Yang authored
Break select page cmds and reload cmds into helper functions. Signed-off-by:
Cong Yang <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240710084715.1119935-4-yangcong5@huaqin.corp-partner.google.com
-
Cong Yang authored
Break select page cmds into helper functions. Signed-off-by:
-
Cong Yang authored
hj110iz-01a and tv110c9m-ll3 both nt36523 controller, and they have some common cmds, so let's break them into helper functions. Signed-off-by:
-
Marco Pagani authored
Replace deferred action function wrappers with equivalent ones defined using the macro introduced by commit 56778b49 ("kunit: Add a macro to wrap a deferred action function") Signed-off-by:
Marco Pagani <marpagan@redhat.com> Signed-off-by:
-
Christian König authored
This was basically just another one of amdgpus hacks. The parameter allowed to restart the scheduler without turning fence signaling on again. That this is absolutely not a good idea should be obvious by now since the fences will then just sit there and never signal. While at it cleanup the code a bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240722083816.99685-1-christian.koenig@amd.com
-
Pin-yen Lin authored
When the bridge is powered off, disable the IRQ until the next power on to workaround an interrupt storm on some badly-designed hardware. Signed-off-by:
Pin-yen Lin <treapking@chromium.org> Reviewed-by:
Robert Foss <rfoss@kernel.org> Signed-off-by:
-
- 24 Jul, 2024 6 commits
-
-
Dmitry Osipenko authored
Define DRM native context capset in the VirtIO-GPU protocol header. Signed-off-by:
Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Reviewed-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240714205502.3409718-1-dmitry.osipenko@collabora.com
-
Marek Vasut authored
Add Densitron DMT028VGHMCMI-1D 480x640 TFT matrix 2.83 inch panel attached to Ilitek ILI9806E DSI TCON into the ILI9806E driver. Note that the Densitron panels use different TCONs, this driver is for the later panel, use panel-ilitek-st7701.c for the former panel: DMT028VGHMCMI-1A - ST7701 DMT028VGHMCMI-1D - ILI9806E Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20240724005700.196073-2-marex@denx.deSigned-off-by:
-
Marek Vasut authored
Document Densitron DMT028VGHMCMI-1D 480x640 TFT matrix 2.83 inch panel attached to Ilitek ILI9806E DSI TCON in the ILI9806E bindings. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240724005700.196073-1-marex@denx.deSigned-off-by:
-
Zhaoxiong Lv authored
Use public functions( drm_connector_helper_get_modes_fixed()) to get porch parameters. Signed-off-by:
Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com> Reviewed-by:
-
Zhaoxiong Lv authored
The current driver can only obtain the porch parameters of boe-th101mb31ig002. Modify it to obtain the porch parameters of the panel currently being used. Reviewed-by:
-
Dang Huynh authored
Enable prepare_prev_first flag for BF060Y8M-AJ0 panel so that the previous controller should be prepared first before the prepare for the panel is called. This makes sure that the previous controller, likely to be a DSI host controller should be initialized to LP-11 before the panel is powered up. Suggested-by:
Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by:
Dang Huynh <danct12@riseup.net> Reviewed-by:
-
- 23 Jul, 2024 5 commits
-
-
Markus Elfring authored
Single characters should be put into a sequence. Thus use the corresponding function “seq_putc” for one selected call. This issue was transformed by using the Coccinelle software. Suggested-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
-
Marek Vasut authored
Make the default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . Acked-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
Marek Vasut authored
Document default DP port preemphasis configurable via new DT property "toshiba,pre-emphasis". This is useful in case the DP link properties are known and starting link training from preemphasis setting of 0 dB is not useful. The preemphasis can be set separately for both DP lanes in range 0=0dB, 1=3.5dB, 2=6dB . This is an endpoint property, not a port property, because the TC9595 datasheet does mention that the DP might operate in some sort of split mode, where each DP lane is used to feed one display, so in that case there might be two endpoints. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240708150130.54484-1-marex@denx.de
-
Rajneesh Bhardwaj authored
Limiting the allocation of higher order pages to the closest NUMA node and enabling direct memory reclaim provides not only failsafe against situations when memory becomes too much fragmented and the allocator is not able to satisfy the request from the local node but falls back to remote pages (HUGEPAGE) but also offers performance improvement. Accessing remote pages suffers due to bandwidth limitations and could be avoided if memory becomes defragmented and in most cases without using manual compaction. (/proc/sys/vm/compact_memory) Note: On certain distros such as RHEL, the proactive compaction is disabled. (https://tinyurl.com/4f32f7rs) v2 (chk): drop __GFP_RECLAIM since that is already set by GFP_USER Cc: Dave Airlie <airlied@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240708160636.1147308-1-rajneesh.bhardwaj@amd.comSigned-off-by:
-
T.J. Mercier authored
The docs for dma_heap_get_name were incorrect, and since they were duplicated in the header they were wrong there too. The docs formatting was inconsistent so I tried to make it more consistent across functions since I'm already in here doing cleanup. Remove multiple unused includes and alphabetize. Signed-off-by:
T.J. Mercier <tjmercier@google.com> Signed-off-by:
Yong Wu <yong.wu@mediatek.com> [Yong: Just add a comment for "priv" to mute build warning] Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240720071606.27930-5-yunfei.dong@mediatek.comSigned-off-by:
-
- 22 Jul, 2024 7 commits
-
-
Danilo Krummrich authored
TTM wants to get rid of the duplicate refcounting of the embedded GEM object and its own reference count. Hence, use of GEM object references where possible. Also get rid of nouveau_bo_ref() and replace it with nouveau_bo_fini(), which drops the initial reference we get from initializing a ttm_bo. Reviewed-by:
-
Danilo Krummrich authored
nouveau_bo_new_pin_map() and nouveau_bo_unmap_unpin_unref() are unused, hence remove them. Reviewed-by:
-
Danilo Krummrich authored
Calling nouveau_bo_ref() on a nouveau_bo without initializing it (and hence the backing ttm_bo) leads to a refcount underflow. Instead of calling nouveau_bo_ref() in the unwind path of drm_gem_object_init(), clean things up manually. Fixes: ab9ccb96 ("drm/nouveau: use prime helpers") Reviewed-by:
-
Terry Hsiao authored
The raw EDIDs for each panel: AUO - B116XTN02.3 00 ff ff ff ff ff ff 00 06 af aa 73 00 00 00 00 00 21 01 04 95 1a 0e 78 02 6b f5 91 55 54 91 27 22 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ce 1d 56 e2 50 00 1e 30 26 16 36 00 00 90 10 00 00 18 df 13 56 e2 50 00 1e 30 26 16 36 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 10 48 ff 0f 3c 7d 50 05 18 7d 20 20 20 00 67 - B116XAN06.1 00 ff ff ff ff ff ff 00 06 af 99 a1 00 00 00 00 00 1f 01 04 95 1a 0e 78 02 9e a5 96 59 58 96 28 1b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ce 1d 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 df 13 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 10 48 ff 0f 3c 7d 0c 0a 2a 7d 20 20 20 00 3a - B116XAT04.1 00 ff ff ff ff ff ff 00 06 af b4 c4 00 00 00 00 12 22 01 04 95 1a 0e 78 02 9e a5 96 59 58 96 28 1b 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 ce 1d 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 df 13 56 ea 50 00 1a 30 30 20 46 00 00 90 10 00 00 18 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 10 48 ff 0f 3c 7d 0c 0a 2a 7d 20 20 20 00 e7 BOE - NV116WHM-A4D 00 ff ff ff ff ff ff 00 09 e5 fa 0c 00 00 00 00 12 22 01 04 95 1a 0e 78 03 0b 55 9a 5f 58 95 28 1e 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 96 1d 56 c8 50 00 26 30 30 20 36 00 00 90 10 00 00 1a b9 13 56 c8 50 00 26 30 30 20 36 00 00 90 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 0d 40 ff 0a 3c 7d 0f 0c 17 7d 00 00 00 00 1a CMN - N116BCA-EA2 00 ff ff ff ff ff ff 00 0d ae 5d 11 00 00 00 00 0f 21 01 04 95 1a 0e 78 03 67 75 98 59 53 90 27 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 da 1d 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a e7 13 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 0c 3d ff 0d 3c 7d 0d 0a 15 7d 00 00 00 00 0f - N116BCP-EA2 00 ff ff ff ff ff ff 00 0d ae 61 11 00 00 00 00 0f 21 01 04 95 1a 0e 78 03 67 75 98 59 53 90 27 1c 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 da 1d 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a e7 13 56 e2 50 00 20 30 30 20 a6 00 00 90 10 00 00 1a 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 0c 3d ff 0d 3c 7d 0d 0a 15 7d 00 00 00 00 0b Signed-off-by:
Terry Hsiao <terry_hsiao@compal.corp-partner.google.com> Reviewed-by:
-
Douglas Anderson authored
At shutdown if you've got a _properly_ coded DRM modeset driver then you'll get these two warnings at shutdown time: Skipping disable of already disabled panel Skipping unprepare of already unprepared panel These warnings are ugly and sound concerning, but they're actually a sign of a properly working system. That's not great. We're not ready to get rid of the calls to drm_panel_disable() and drm_panel_unprepare() because we're not 100% convinced that all DRM modeset drivers are properly calling drm_atomic_helper_shutdown() or drm_helper_force_disable_all() at the right times. However, having the warning show up for correctly working systems is bad. As a bit of a workaround, add some "if" tests to try to avoid the warning on correctly working systems. Also add some comments and update the TODO items in the hopes that future developers won't be too confused by what's going on here. Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Jocelyn Falempe authored
When the kmsg_dumper callback parameter changed, the reason variable in mtdoops_do_dump() was not updated accordingly. This breaks the build with mtdoops. Fixes: e1a261ba ("printk: Add a short description string to kmsg_dump()") Suggested-by:
Knop Ryszard <ryszard.knop@intel.com> Signed-off-by:
Jocelyn Falempe <jfalempe@redhat.com> Acked-by:
Richard Weinberger <richard@nod.at> Link: https://patchwork.freedesktop.org/patch/msgid/20240719152542.1554440-1-jfalempe@redhat.com
-
Jocelyn Falempe authored
Panic_cpu is not exported, so it can't be used if fbcon is used as a module. Use oops_in_progress in this case, but non-fatal oops won't be printed. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407210203.2ISiIC9m-lkp@intel.com/Signed-off-by:
-
- 19 Jul, 2024 7 commits
-
-
Jocelyn Falempe authored
This breaks build if DRM_PANIC is not enabled. Also add the missing include drm_crtc_internal.h in drm_panic.c Fixes: 9f774c42 ("drm/panic: Add drm_panic_is_enabled()") Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240719122051.1507927-1-jfalempe@redhat.com
-
Arnd Bergmann authored
The added lvds driver and a change in the dsi driver resulted in failed builds when COMMON_CLK is disabled: x86_64-linux-ld: drivers/gpu/drm/stm/dw_mipi_dsi-stm.o: in function `dw_mipi_dsi_stm_remove': dw_mipi_dsi-stm.c:(.text+0x51e): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_remove': lvds.c:(.text+0xe3): undefined reference to `of_clk_del_provider' x86_64-linux-ld: lvds.c:(.text+0xec): undefined reference to `clk_hw_unregister' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_pll_config': lvds.c:(.text+0xb5d): undefined reference to `clk_hw_get_rate' x86_64-linux-ld: drivers/gpu/drm/stm/lvds.o: in function `lvds_probe': lvds.c:(.text+0x1476): undefined reference to `clk_hw_register' x86_64-linux-ld: lvds.c:(.text+0x148b): undefined reference to `of_clk_hw_simple_get' x86_64-linux-ld: lvds.c:(.text+0x1493): undefined reference to `of_clk_add_hw_provider' x86_64-linux-ld: lvds.c:(.text+0x1535): undefined reference to `clk_hw_unregister' Add this as a dependency for the stm driver itself, since it will be required in practice anyway. Fixes: 185f99b6 ("drm/stm: dsi: expose DSI PHY internal clock") Fixes: aca1cbc1 ("drm/stm: lvds: add new STM32 LVDS Display Interface Transmitter driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://patchwork.freedesktop.org/patch/msgid/20240719075454.3595358-1-arnd@kernel.orgSigned-off-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
-
Jocelyn Falempe authored
Now that fbcon has the skip_panic option, there is no more conflicts between drm_panic and fbcon. Remove the build time dependency, so they can be both enabled. Signed-off-by:
Javier Martinez Canillas <javierm@redhat.com> Reviewed-by:
-
Jocelyn Falempe authored
fb_info->skip_panic flag prevents fbcon from writing to the framebuffer during a kernel panic. So set it when the drm driver implements drm panic, to avoid overwriting the panic screen. Signed-off-by:
-
Jocelyn Falempe authored
This is required to avoid conflict between DRM_PANIC, and fbcon. If a drm device already handle panic with drm_panic, it should set the skip_panic field in fb_info, so that fbcon will stay quiet, and not overwrite the panic_screen. Signed-off-by:
-
Jocelyn Falempe authored
It allows to check if the drm device supports drm_panic. Prepare the work to have better integration with fbcon and vtconsole. Signed-off-by:
-
Yannick Fertre authored
The reload interrupt is not used by the driver. To avoid unnecessary calls of the interrupt routine, don't enable it. Solve small typo and add mask to simplify the driver. Signed-off-by:
Yannick Fertre <yannick.fertre@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240712131453.98597-1-yannick.fertre@foss.st.comSigned-off-by:
-
