- 05 Nov, 2021 12 commits
-
-
Jakub Kicinski authored
Build bot says: >> drivers/net/ethernet/asix/ax88796c_main.c:1116:34: warning: unused variable 'ax88796c_dt_ids' [-Wunused-const-variable] static const struct of_device_id ax88796c_dt_ids[] = { ^ The only reference to this array is wrapped in of_match_ptr(). Reported-by:kernel test robot <lkp@intel.com> Fixes: a97c69ba ("net: ax88796c: ASIX AX88796C SPI Ethernet Adapter Driver") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Menglong Dong authored
udp_mem is a vector of 3 INTEGERs, which is used to limit the number of pages allowed for queueing by all UDP sockets. However, sk_has_memory_pressure() in __sk_mem_raise_allocated() always return false for udp, as memory pressure is not supported by udp, which means that __sk_mem_raise_allocated() will fail once pages allocated for udp socket exceeds udp_mem[0]. Therefor, udp_mem[0] is the only one that limit the number of pages. However, the document of udp_mem just express that udp_mem[2] is the limitation. So, just fix it. Signed-off-by:
Menglong Dong <imagedong@tencent.com> Signed-off-by:
-
Xu Wang authored
The print function dev_err() is redundant because platform_get_irq() already prints an error. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Reviewed-by:
Cai Huoqing <caihuoqing@baidu.com> Signed-off-by:
-
Arnd Bergmann authored
The octeontx2 pf nic driver failsz to link when the devlink support is not reachable: aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get': otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate': otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set': otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv' aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get': otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv' This is already selected by the admin function driver, but not the actual nic, which might be built-in when the af driver is not. Fixes: 2da48943 ("octeontx2-pf: devlink params support to set mcam entry count") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Yang Guang <yang.guang5@zte.com.cn> Signed-off-by:
-
Yang Guang authored
Use the macro 'swap()' defined in 'include/linux/minmax.h' to avoid opencoding it. Reported-by:
-
luo penghao authored
The assignment of err will be overwritten next, so this statement should be deleted. The clang_analyzer complains as follows: drivers/net/ethernet/broadcom/tg3.c:5506:2: warning: Value stored to 'expected_sg_dig_ctrl' is never read Reported-by:
luo penghao <luo.penghao@zte.com.cn> Signed-off-by:
-
Tony Lu authored
This makes the output of smcr_link_down tracepoint easier to use and understand without additional translating function's pointer address. It prints the function name with offset: <idle>-0 [000] ..s. 69.087164: smcr_link_down: lnk=00000000dab41cdc lgr=000000007d5d8e24 state=0 rc=1 dev=mlx5_0 location=smc_wr_tx_tasklet_fn+0x5ef/0x6f0 [smc] Link: https://lore.kernel.org/netdev/11f17a34-fd35-f2ec-3f20-dd0c34e55fde@linux.ibm.com/Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Reviewed-by:
Wen Gu <guwen@linux.alibaba.com> Signed-off-by:
-
Huang Guobin authored
When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec4 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by:Huang Guobin <huangguobin4@huawei.com> Reviewed-by:
-
Jakub Kicinski authored
Eugene Syromiatnikov says: ==================== MCTP sockaddr padding check/initialisation fixup This pair of patches introduces checks for padding fields of struct sockaddr_mctp/sockaddr_mctp_ext to ease their re-use for possible extensions in the future; as well as zeroing of these fields in the respective sockaddr filling routines. While the first commit is definitely an ABI breakage, it is proposed in hopes that the change is made soon enough (the interface appeared only in Linux 5.15) to avoid affecting any existing user space. ==================== Link: https://lore.kernel.org/r/cover.1635965993.git.esyr@redhat.comSigned-off-by:
-
Eugene Syromiatnikov authored
struct sockaddr_mctp_ext.__smctp_paddin0 has to be checked for being set to zero, otherwise it cannot be utilised in the future. Fixes: 99ce45d5 ("mctp: Implement extended addressing") Signed-off-by:
Eugene Syromiatnikov <esyr@redhat.com> Acked-by:
Jeremy Kerr <jk@codeconstruct.com.au> Signed-off-by:
-
Eugene Syromiatnikov authored
In order to have the padding fields actually usable in the future, there have to be checks that user space doesn't supply non-zero garbage there. It is also worth setting these padding fields to zero, unless it is known that they have been already zeroed. Cc: stable@vger.kernel.org # v5.15 Fixes: 5a20dd46 ("mctp: Be explicit about struct sockaddr_mctp padding") Signed-off-by:
-
- 04 Nov, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-11-03 Brett fixes issues with promiscuous mode settings not being properly enabled and removes setting of VF antispoof along with promiscuous mode. He also ensures that VF Tx queues are always disabled and resolves a race between virtchnl handling and VF related ndo ops. Sylwester fixes an issue where a VF MAC could not be set to its primary MAC if the address is already present. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix race conditions between virtchnl handling and VF ndo ops ice: Fix not stopping Tx queues for VFs ice: Fix replacing VF hardware MAC to existing MAC filter ice: Remove toggling of antispoof for VF trusted promiscuous mode ice: Fix VF true promiscuous mode ==================== Link: https://lore.kernel.org/r/20211103161935.2997369-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Heiner Kallweit authored
As reported by Zhang there's a small issue if in forced mode the duplex mode changes with the link staying up [0]. In this case the MAC isn't notified about the change. The proposed patch relies on the phylib state machine and ignores the fact that there are drivers that uses phylib but not the phylib state machine. So let's don't change the behavior for such drivers and fix it w/o re-adding state PHY_FORCING for the case that phylib state machine is used. [0] https://lore.kernel.org/netdev/a5c26ffd-4ee4-a5e6-4103-873208ce0dc5@huawei.com/T/ Fixes: 2bd229df ("net: phy: remove state PHY_FORCING") Reported-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/7b8b9456-a93f-abbc-1dc5-a2c2542f932c@gmail.comSigned-off-by:
-
Guo Zhengkui authored
Fix following coccicheck warning: ./net/core/devlink.c:69:6-10: WARNING use flexible-array member instead Signed-off-by:
Guo Zhengkui <guozhengkui@vivo.com> Link: https://lore.kernel.org/r/20211103121607.27490-1-guozhengkui@vivo.comSigned-off-by:
-
Eric Dumazet authored
Sanity check in sock_reserve_memory() was not enough to prevent malicious user to trigger a NULL deref. In this case, the isse is that sk_prot->memory_allocated is NULL. Use standard sk_has_account() helper to deal with this. BUG: KASAN: null-ptr-deref in instrument_atomic_read_write include/linux/instrumented.h:101 [inline] BUG: KASAN: null-ptr-deref in atomic_long_add_return include/linux/atomic/atomic-instrumented.h:1218 [inline] BUG: KASAN: null-ptr-deref in sk_memory_allocated_add include/net/sock.h:1371 [inline] BUG: KASAN: null-ptr-deref in sock_reserve_memory net/core/sock.c:994 [inline] BUG: KASAN: null-ptr-deref in sock_setsockopt+0x22ab/0x2b30 net/core/sock.c:1443 Write of size 8 at addr 0000000000000000 by task syz-executor.0/11270 CPU: 1 PID: 11270 Comm: syz-executor.0 Not tainted 5.15.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold+0x66/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_long_add_return include/linux/atomic/atomic-instrumented.h:1218 [inline] sk_memory_allocated_add include/net/sock.h:1371 [inline] sock_reserve_memory net/core/sock.c:994 [inline] sock_setsockopt+0x22ab/0x2b30 net/core/sock.c:1443 __sys_setsockopt+0x4f8/0x610 net/socket.c:2172 __do_sys_setsockopt net/socket.c:2187 [inline] __se_sys_setsockopt net/socket.c:2184 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2184 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f56076d5ae9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5604c4b188 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00007f56077e8f60 RCX: 00007f56076d5ae9 RDX: 0000000000000049 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 00007f560772ff25 R08: 000000000000fec7 R09: 0000000000000000 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffb61a100f R14: 00007f5604c4b300 R15: 0000000000022000 </TASK> Fixes: 2bb2f5fb ("net: add new socket option SO_RESERVE_MEM") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
-
Leonard Crestez authored
Extending these flags using the existing (1 << x) pattern triggers complaints from checkpatch. Instead of ignoring checkpatch modify the existing values to use BIT(x) style in a separate commit. Signed-off-by:
Leonard Crestez <cdleonard@gmail.com> Reviewed-by:
-
Andrea Righi authored
Explicitly pass -6 to netcat when the test is using IPv6 to prevent failures. Also make sure to pass "-N" to netcat to close the socket after EOF on the client side, otherwise we would always hit the timeout and the test would fail. Without this fix applied: TEST: GREv6/v4 - copy file w/ TSO [FAIL] TEST: GREv6/v4 - copy file w/ GSO [FAIL] TEST: GREv6/v6 - copy file w/ TSO [FAIL] TEST: GREv6/v6 - copy file w/ GSO [FAIL] With this fix applied: TEST: GREv6/v4 - copy file w/ TSO [ OK ] TEST: GREv6/v4 - copy file w/ GSO [ OK ] TEST: GREv6/v6 - copy file w/ TSO [ OK ] TEST: GREv6/v6 - copy file w/ GSO [ OK ] Fixes: 025efa0a ("selftests: add simple GSO GRE test") Signed-off-by:
Andrea Righi <andrea.righi@canonical.com> Signed-off-by:
-
- 03 Nov, 2021 22 commits
-
-
Brett Creeley authored
The VF can be configured via the PF's ndo ops at the same time the PF is receiving/handling virtchnl messages. This has many issues, with one of them being the ndo op could be actively resetting a VF (i.e. resetting it to the default state and deleting/re-adding the VF's VSI) while a virtchnl message is being handled. The following error was seen because a VF ndo op was used to change a VF's trust setting while the VIRTCHNL_OP_CONFIG_VSI_QUEUES was ongoing: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by making sure the virtchnl handling and VF ndo ops that trigger VF resets cannot run concurrently. This is done by adding a struct mutex cfg_lock to each VF structure. For VF ndo ops, the mutex will be locked around the critical operations and VFR. Since the ndo ops will trigger a VFR, the virtchnl thread will use mutex_trylock(). This is done because if any other thread (i.e. VF ndo op) has the mutex, then that means the current VF message being handled is no longer valid, so just ignore it. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 7c710869 ("ice: Add handlers for VF netdevice operations") Signed-off-by:Brett Creeley <brett.creeley@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Brett Creeley authored
When a VF is removed and/or reset its Tx queues need to be stopped from the PF. This is done by calling the ice_dis_vf_qs() function, which calls ice_vsi_stop_lan_tx_rings(). Currently ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA. Unfortunately, this is causing the Tx queues to not be disabled in some cases and when the VF tries to re-enable/reconfigure its Tx queues over virtchnl the op is failing. This is because a VF can be reset and/or removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues were already configured via ice_vsi_cfg_single_txq() in the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op. This was causing the following error message when loading the ice driver, creating VFs, and modifying VF trust in an endless loop: [35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM [35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5 [35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6 Fix this by always calling ice_dis_vf_qs() and silencing the error message in ice_vsi_stop_tx_ring() since the calling code ignores the return anyway. Also, all other places that call ice_vsi_stop_tx_ring() catch the error, so this doesn't affect those flows since there was no change to the values the function returns. Other solutions were considered (i.e. tracking which VF queues had been "started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed more complicated than it was worth. This solution also brings in the chance for other unexpected conditions due to invalid state bit checks. So, the proposed solution seemed like the best option since there is no harm in failing to stop Tx queues that were never started. This issue can be seen using the following commands: for i in {0..50}; do rmmod ice modprobe ice sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on sleep 2 echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs ip link set ens785f1 vf 0 trust on ip link set ens785f0 vf 0 trust on done Fixes: 77ca27c4 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap") Signed-off-by: -
Sylwester Dziedziuch authored
VF was not able to change its hardware MAC address in case the new address was already present in the MAC filter list. Change the handling of VF add mac request to not return if requested MAC address is already present on the list and check if its hardware MAC needs to be updated in this case. Fixes: ed4c068d ("ice: Enable ip link show on the PF to display VF unicast MAC(s)") Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by:
Tony Brelinski <tony.brelinski@intel.com> Signed-off-by:
-
Brett Creeley authored
Currently when a trusted VF enables promiscuous mode spoofchk will be disabled. This is wrong and should only be modified from the ndo_set_vf_spoofchk callback. Fix this by removing the call to toggle spoofchk for trusted VFs. Fixes: 01b5e89a ("ice: Add VF promiscuous support") Signed-off-by:
-
Brett Creeley authored
When a VF requests promiscuous mode and it's trusted and true promiscuous mode is enabled the PF driver attempts to enable unicast and/or multicast promiscuous mode filters based on the request. This is fine, but there are a couple issues with the current code. [1] The define to configure the unicast promiscuous mode mask also includes bits to configure the multicast promiscuous mode mask, which causes multicast to be set/cleared unintentionally. [2] All 4 cases for enable/disable unicast/multicast mode are not handled in the promiscuous mode message handler, which causes unexpected results regarding the current promiscuous mode settings. To fix [1] make sure any promiscuous mask defines include the correct bits for each of the promiscuous modes. To fix [2] make sure that all 4 cases are handled since there are 2 bits (FLAG_VF_UNICAST_PROMISC and FLAG_VF_MULTICAST_PROMISC) that can be either set or cleared. Also, since either unicast and/or multicast promiscuous configuration can fail, introduce two separate error values to handle each of these cases. Fixes: 01b5e89a ("ice: Add VF promiscuous support") Signed-off-by: -
Vladimir Oltean authored
Normally it is expected that the dsa_device_ops :: rcv() method finishes parsing the DSA tag and consumes it, then never looks at it again. But commit c0bcf537 ("net: dsa: ocelot: add hardware timestamping support for Felix") added support for RX timestamping in a very unconventional way. On this switch, a partial timestamp is available in the DSA header, but the driver got away with not parsing that timestamp right away, but instead delayed that parsing for a little longer: dsa_switch_rcv(): nskb = cpu_dp->rcv(skb, dev); <------------- not here -> ocelot_rcv() ... skb = nskb; skb_push(skb, ETH_HLEN); skb->pkt_type = PACKET_HOST; skb->protocol = eth_type_trans(skb, skb->dev); ... if (dsa_skb_defer_rx_timestamp(p, skb)) <--- but here -> felix_rxtstamp() return 0; When in felix_rxtstamp(), this driver accounted for the fact that eth_type_trans() happened in the meanwhile, so it got a hold of the extraction header again by subtracting (ETH_HLEN + OCELOT_TAG_LEN) bytes from the current skb->data. This worked for quite some time but was quite fragile from the very beginning. Not to mention that having DSA tag parsing split in two different files, under different folders (net/dsa/tag_ocelot.c vs drivers/net/dsa/ocelot/felix.c) made it quite non-obvious for patches to come that they might break this. Finally, the blamed commit does the following: at the end of ocelot_rcv(), it checks whether the skb payload contains a VLAN header. If it does, and this port is under a VLAN-aware bridge, that VLAN ID might not be correct in the sense that the packet might have suffered VLAN rewriting due to TCAM rules (VCAP IS1). So we consume the VLAN ID from the skb payload using __skb_vlan_pop(), and take the classified VLAN ID from the DSA tag, and construct a hwaccel VLAN tag with the classified VLAN, and the skb payload is VLAN-untagged. The big problem is that __skb_vlan_pop() does: memmove(skb->data + VLAN_HLEN, skb->data, 2 * ETH_ALEN); __skb_pull(skb, VLAN_HLEN); aka it moves the Ethernet header 4 bytes to the right, and pulls 4 bytes from the skb headroom (effectively also moving skb->data, by definition). So for felix_rxtstamp()'s fragile logic, all bets are off now. Instead of having the "extraction" pointer point to the DSA header, it actually points to 4 bytes _inside_ the extraction header. Corollary, the last 4 bytes of the "extraction" header are in fact 4 stale bytes of the destination MAC address from the Ethernet header, from prior to the __skb_vlan_pop() movement. So of course, RX timestamps are completely bogus when the system is configured in this way. The fix is actually very simple: just don't structure the code like that. For better or worse, the DSA PTP timestamping API does not offer a straightforward way for drivers to present their RX timestamps, but other drivers (sja1105) have established a simple mechanism to carry their RX timestamp from dsa_device_ops :: rcv() all the way to dsa_switch_ops :: port_rxtstamp() and even later. That mechanism is to simply save the partial timestamp to the skb->cb, and complete it later. Question: why don't we simply populate the skb's struct skb_shared_hwtstamps from ocelot_rcv(), and bother with this complication of propagating the timestamp to felix_rxtstamp()? Answer: dsa_switch_ops :: port_rxtstamp() answers the question whether PTP packets need sleepable context to retrieve the full RX timestamp. Currently felix_rxtstamp() answers "no, thanks" to that question, and calls ocelot_ptp_gettime64() from softirq atomic context. This is understandable, since Felix VSC9959 is a PCIe memory-mapped switch, so hardware access does not require sleeping. But the felix driver is preparing for the introduction of other switches where hardware access is over a slow bus like SPI or MDIO: https://lore.kernel.org/lkml/20210814025003.2449143-1-colin.foster@in-advantage.com/ So I would like to keep this code structure, so the rework needed when that driver will need PTP support will be minimal (answer "yes, I need deferred context for this skb's RX timestamp", then the partial timestamp will still be found in the skb->cb. Fixes: ea440cd2 ("net: dsa: tag_ocelot: use VLAN information from tagging header when available") Reported-by:
Po Liu <po.liu@nxp.com> Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Ansuel Smith authored
Some device set MAC06 exchange in the bootloader. This cause some problem as we don't support this strange mode and we just set the port6 as the primary CPU port. With MAC06 exchange, PAD0 reg configure port6 instead of port0. Add an extra check and explicitly disable MAC06 exchange to correctly configure the port PAD config. Signed-off-by:
Ansuel Smith <ansuelsmth@gmail.com> Fixes: 3fcf734a ("net: dsa: qca8k: add support for cpu port 6") Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
Ziyang Xuan authored
The real_dev of a vlan net_device may be freed after unregister_vlan_dev(). Access the real_dev continually by vlan_dev_real_dev() will trigger the UAF problem for the real_dev like following: ================================================================== BUG: KASAN: use-after-free in vlan_dev_real_dev+0xf9/0x120 Call Trace: kasan_report.cold+0x83/0xdf vlan_dev_real_dev+0xf9/0x120 is_eth_port_of_netdev_filter.part.0+0xb1/0x2c0 is_eth_port_of_netdev_filter+0x28/0x40 ib_enum_roce_netdev+0x1a3/0x300 ib_enum_all_roce_netdevs+0xc7/0x140 netdevice_event_work_handler+0x9d/0x210 ... Freed by task 9288: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfc/0x130 slab_free_freelist_hook+0xdd/0x240 kfree+0xe4/0x690 kvfree+0x42/0x50 device_release+0x9f/0x240 kobject_put+0x1c8/0x530 put_device+0x1b/0x30 free_netdev+0x370/0x540 ppp_destroy_interface+0x313/0x3d0 ... Move the put_device(real_dev) to vlan_dev_free(). Ensure real_dev not be freed before vlan_dev unregistered. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+e4df4e1389e28972e955@syzkaller.appspotmail.com Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
Menglong Dong authored
__UDP_INC_STATS() is used in udpv6_queue_rcv_one_skb() when encap_rcv() fails. __UDP6_INC_STATS() should be used here, so replace it with __UDP6_INC_STATS(). Signed-off-by:
-
Jakub Kicinski authored
ETHTOOL_A_PAUSE_STAT_MAX is the MAX attribute id, so we need to subtract non-stats and add one to get a count (IOW -2+1 == -1). Otherwise we'll see: ethnl cmd 21: calculated reply length 40, but consumed 52 Fixes: 9a27a330 ("ethtool: add standard pause stats") Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Talal Ahmad authored
Track skbs containing only zerocopy data and avoid charging them to kernel memory to correctly account the memory utilization for msg_zerocopy. All of the data in such skbs is held in user pages which are already accounted to user. Before this change, they are charged again in kernel in __zerocopy_sg_from_iter. The charging in kernel is excessive because data is not being copied into skb frags. This excessive charging can lead to kernel going into memory pressure state which impacts all sockets in the system adversely. Mark pure zerocopy skbs with a SKBFL_PURE_ZEROCOPY flag and remove charge/uncharge for data in such skbs. Initially, an skb is marked pure zerocopy when it is empty and in zerocopy path. skb can then change from a pure zerocopy skb to mixed data skb (zerocopy and copy data) if it is at tail of write queue and there is room available in it and non-zerocopy data is being sent in the next sendmsg call. At this time sk_mem_charge is done for the pure zerocopied data and the pure zerocopy flag is unmarked. We found that this happens very rarely on workloads that pass MSG_ZEROCOPY. A pure zerocopy skb can later be coalesced into normal skb if they are next to each other in queue but this patch prevents coalescing from happening. This avoids complexity of charging when skb downgrades from pure zerocopy to mixed. This is also rare. In sk_wmem_free_skb, if it is a pure zerocopy skb, an sk_mem_uncharge for SKB_TRUESIZE(skb_end_offset(skb)) is done for sk_mem_charge in tcp_skb_entail for an skb without data. Testing with the msg_zerocopy.c benchmark between two hosts(100G nics) with zerocopy showed that before this patch the 'sock' variable in memory.stat for cgroup2 that tracks sum of sk_forward_alloc, sk_rmem_alloc and sk_wmem_queued is around 1822720 and with this change it is 0. This is due to no charge to sk_forward_alloc for zerocopy data and shows memory utilization for kernel is lowered. With this commit we don't see the warning we saw in previous commit which resulted in commit 84882cf7. Signed-off-by:
Talal Ahmad <talalahmad@google.com> Acked-by:
Arjun Roy <arjunroy@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Zhang Mingyu authored
Eliminate the following coccinelle check warning: net/ipv6/seg6.c:381:2-3 Reported-by:
Zhang Mingyu <zhang.mingyu@zte.com.cn> Signed-off-by:
-
Lin Ma authored
The CAP_NET_ADMIN checks are needed to prevent attackers faking a device under NCIUARTSETDRIVER and exploit privileged commands. This patch add GENL_ADMIN_PERM flags in genl_ops to fulfill the check. Except for commands like NFC_CMD_GET_DEVICE, NFC_CMD_GET_TARGET, NFC_CMD_LLC_GET_PARAMS, and NFC_CMD_GET_SE, which are mainly information- read operations. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
-
David S. Miller authored
Xin Long says: ==================== security: fixups for the security hooks in sctp There are a couple of problems in the currect security hooks in sctp: 1. The hooks incorrectly treat sctp_endpoint in SCTP as request_sock in TCP, while it's in fact no more than an extension of the sock, and represents the local host. It is created when sock is created, not when a conn request comes. sctp_association is actually the correct one to represent the connection, and created when a conn request arrives. 2. security_sctp_assoc_request() hook should also be called in processing COOKIE ECHO, as that's the place where the real assoc is created and used in the future. The problems above may cause accept sk, peeloff sk or client sk having the incorrect security labels. So this patchset is to change some hooks and pass asoc into them and save these secids into asoc, as well as add the missing sctp_assoc_request hook into the COOKIE ECHO processing. v1->v2: - See each patch, and thanks the help from Ondrej, Paul and Richard. ==================== Signed-off-by: -
Xin Long authored
Different from selinux_inet_conn_established(), it also gives the secid to asoc->peer_secid in selinux_sctp_assoc_established(), as one UDP-type socket may have more than one asocs. Note that peer_secid in asoc will save the peer secid for this asoc connection, and peer_sid in sksec will just keep the peer secid for the latest connection. So the right use should be do peeloff for UDP-type socket if there will be multiple asocs in one socket, so that the peeloff socket has the right label for its asoc. v1->v2: - call selinux_inet_conn_established() to reduce some code duplication in selinux_sctp_assoc_established(), as Ondrej suggested. - when doing peeloff, it calls sock_create() where it actually gets secid for socket from socket_sockcreate_sid(). So reuse SECSID_WILD to ensure the peeloff socket keeps using that secid after calling selinux_sctp_sk_clone() for client side. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by:Prashanth Prahlad <pprahlad@redhat.com> Reviewed-by:
Richard Haines <richard_c_haines@btinternet.com> Tested-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
security_sctp_assoc_established() is added to replace security_inet_conn_established() called in sctp_sf_do_5_1E_ca(), so that asoc can be accessed in security subsystem and save the peer secid to asoc->peer_secid. v1->v2: - fix the return value of security_sctp_assoc_established() in security.h, found by kernel test robot and Ondrej. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by: -
Xin Long authored
The asoc created when receives the INIT chunk is a temporary one, it will be deleted after INIT_ACK chunk is replied. So for the real asoc created in sctp_sf_do_5_1D_ce() when the COOKIE_ECHO chunk is received, security_sctp_assoc_request() should also be called. v1->v2: - fix some typo and grammar errors, noticed by Ondrej. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by:
-
Xin Long authored
This patch is to move secid and peer_secid from endpoint to association, and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As ep is the local endpoint and asoc represents a connection, and in SCTP one sk/ep could have multiple asoc/connection, saving secid/peer_secid for new asoc will overwrite the old asoc's. Note that since asoc can be passed as NULL, security_sctp_assoc_request() is moved to the place right after the new_asoc is created in sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init(). v1->v2: - fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed. - fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed. Fixes: 72e89f50 ("security: Add support for SCTP security hooks") Reported-by:
-
David S. Miller authored
Hangbin Liu says: ==================== kselftests/net: add missed tests to Makefile When generating the selftest to another folder, some tests are missing as they are not added in Makefile. e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests These pathset add them separately to make the Fixes tags less. It would also make the stable tree or downstream backport easier. If you think there is no need to add the Fixes tag for this minor issue. I can repost a new patch and merge all the fixes together. Thanks v3: no update, just rebase to latest net tree. v2: move toeplitz.sh/toeplitz_client.sh under TEST_PROGS_EXTENDED. ==================== Signed-off-by: -
Hangbin Liu authored
When generating the selftests to another folder, the toeplitz.sh and toeplitz_client.sh are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Making them under TEST_PROGS_EXTENDED as they test NIC hardware features and are not intended to be run from kselftests. Fixes: 5ebfb4cc ("selftests/net: toeplitz test") Reviewed-by:Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
When generating the selftests to another folder, the vrf_strict_mode_test.sh test will miss as it is not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Fixes: 8735e6ea ("selftests: add selftest for the VRF strict mode") Signed-off-by: -
Hangbin Liu authored
When generating the selftests to another folder, the SRv6 tests are missing as they are not in Makefile, e.g. make -C tools/testing/selftests/ install \ TARGETS="net" INSTALL_PATH=/tmp/kselftests Fixes: 03a0b567 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior") Fixes: 2195444e ("selftests: add selftest for the SRv6 End.DT4 behavior") Fixes: 2bc03553 ("selftests: add selftest for the SRv6 End.DT6 (VRF) behavior") Signed-off-by:
-
