1. 28 Jun, 2012 2 commits
  2. 25 Jun, 2012 2 commits
  3. 12 Jun, 2012 9 commits
  4. 24 May, 2012 1 commit
  5. 21 May, 2012 1 commit
  6. 11 May, 2012 17 commits
    • Viresh Kumar's avatar
      Input: spear-keyboard - add device tree bindings · 829c4f96
      Viresh Kumar authored
      This adds simple DT bindings for spear-keyboard controller.
      Signed-off-by: default avatarViresh Kumar <viresh.kumar@st.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      829c4f96
    • Dmitry Torokhov's avatar
      Input: matrix-keymap - wire up device tree support · b45c8f35
      Dmitry Torokhov authored
      When platform keymap is not supplied to matrix_keypad_build_keymap()
      and device tree support is enabled, try locating specified property
      and load keymap from it. If property name is not defined, try using
      "linux,keymap".
      
      Based on earlier patch by Viresh Kumar <viresh.kumar@st.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      b45c8f35
    • Dmitry Torokhov's avatar
      Input: matrix-keymap - uninline and prepare for device tree support · 1932811f
      Dmitry Torokhov authored
      Change matrix-keymap helper to be out-of-line, like sparse keymap,
      allow the helper perform basic keymap validation and return errors,
      and prepare for device tree support.
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      1932811f
    • Jean-François Dagenais's avatar
    • Poddar, Sourav's avatar
      Input: omap-keypad - dynamically handle register offsets · f77621cc
      Poddar, Sourav authored
      Hi Dmitry,
      
      On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote:
      > Hi Dmitry,
      >
      > I did some minor fixes to the patch which you suggested above and
      > the keypad is functional now.
      >
      > Changes:
      > - Move "pm_runtime_enable" before using "pm_runtime_get_sync".
      >
      > Sending the patch inlined..(also attached).
      >
      > From: G, Manjunath Kondaiah <manjugk@ti.com>
      > Date: Mon, 10 Oct 2011 20:52:05 +0530
      > Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets
      >
      > Keypad controller register offsets are different for omap4
      > and omap5. Handle these offsets through static mapping and
      > assign these mappings during run time.
      >
      > Tested on omap4430 sdp with 3.4-rc3.
      > Tested on omap5430evm with 3.1-custom kernel.
      >
      > Cc: Andrew Morton <akpm@linux-foundation.org>
      > Signed-off-by: Felipe Balbi <balbi@ti.com>
      > Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
      > Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
      > Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
      > ---
      >  drivers/input/keyboard/Kconfig        |    4 +-
      >  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++-------
      >  2 files changed, 95 insertions(+), 29 deletions(-)
      >
      > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
      > index f354813..33bbdee 100644
      > --- a/drivers/input/keyboard/Kconfig
      > +++ b/drivers/input/keyboard/Kconfig
      > @@ -512,9 +512,9 @@ config KEYBOARD_OMAP
      >          module will be called omap-keypad.
      >
      >  config KEYBOARD_OMAP4
      > -       tristate "TI OMAP4 keypad support"
      > +       tristate "TI OMAP4+ keypad support"
      >        help
      > -         Say Y here if you want to use the OMAP4 keypad.
      > +         Say Y here if you want to use the OMAP4+ keypad.
      >
      >          To compile this driver as a module, choose M here: the
      >          module will be called omap4-keypad.
      > diff --git a/drivers/input/keyboard/omap4-keypad.c
      > b/drivers/input/keyboard/omap4-keypad.c
      > index e809ac0..d7102e8 100644
      > --- a/drivers/input/keyboard/omap4-keypad.c
      > +++ b/drivers/input/keyboard/omap4-keypad.c
      > @@ -68,19 +68,52 @@
      >
      >  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
      >
      > +enum {
      > +       KBD_REVISION_OMAP4 = 0,
      > +       KBD_REVISION_OMAP5,
      > +};
      > +
      >  struct omap4_keypad {
      >        struct input_dev *input;
      >
      >        void __iomem *base;
      > -       int irq;
      > +       unsigned int irq;
      >
      >        unsigned int rows;
      >        unsigned int cols;
      > +       u32 reg_offset;
      > +       u32 irqreg_offset;
      >        unsigned int row_shift;
      >        unsigned char key_state[8];
      >        unsigned short keymap[];
      >  };
      >
      > +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
      > +{
      > +       return __raw_readl(keypad_data->base +
      > +                               keypad_data->reg_offset + offset);
      > +}
      > +
      > +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
      > +{
      > +       __raw_writel(value,
      > +                    keypad_data->base + keypad_data->reg_offset + offset);
      > +}
      > +
      > +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
      > +{
      > +       return __raw_readl(keypad_data->base +
      > +                               keypad_data->irqreg_offset + offset);
      > +}
      > +
      > +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
      > +                            u32 offset, u32 value)
      > +{
      > +       __raw_writel(value,
      > +                    keypad_data->base + keypad_data->irqreg_offset + offset);
      > +}
      > +
      > +
      >  /* Interrupt handler */
      >  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
      >  {
      > @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int
      > irq, void *dev_id)
      >        u32 *new_state = (u32 *) key_state;
      >
      >        /* Disable interrupts */
      > -       __raw_writel(OMAP4_VAL_IRQDISABLE,
      > -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      > +                        OMAP4_VAL_IRQDISABLE);
      >
      > -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
      > -       *(new_state + 1) = __raw_readl(keypad_data->base
      > -                                               + OMAP4_KBD_FULLCODE63_32);
      > +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
      > +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
      >
      >        for (row = 0; row < keypad_data->rows; row++) {
      >                changed = key_state[row] ^ keypad_data->key_state[row];
      > @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int
      > irq, void *dev_id)
      >                sizeof(keypad_data->key_state));
      >
      >        /* clear pending interrupts */
      > -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
      > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
      > +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
      >
      >        /* enable interrupts */
      > -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
      > -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      > +               OMAP4_DEF_IRQENABLE_EVENTEN |
      > +                               OMAP4_DEF_IRQENABLE_LONGKEY);
      >
      >        return IRQ_HANDLED;
      >  }
      > @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
      >
      >        disable_irq(keypad_data->irq);
      >
      > -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
      > -                       keypad_data->base + OMAP4_KBD_CTRL);
      > -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
      > -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
      > -       __raw_writel(OMAP4_VAL_IRQDISABLE,
      > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
      > -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
      > -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
      > -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
      > -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
      > +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
      > +                       OMAP4_VAL_FUNCTIONALCFG);
      > +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
      > +                       OMAP4_VAL_DEBOUNCINGTIME);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
      > +                       OMAP4_VAL_IRQDISABLE);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      > +                       OMAP4_DEF_IRQENABLE_EVENTEN |
      > +                               OMAP4_DEF_IRQENABLE_LONGKEY);
      > +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
      > +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
      >
      >        enable_irq(keypad_data->irq);
      >
      > @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
      >        disable_irq(keypad_data->irq);
      >
      >        /* Disable interrupts */
      > -       __raw_writel(OMAP4_VAL_IRQDISABLE,
      > -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      > +                        OMAP4_VAL_IRQDISABLE);
      >
      >        /* clear pending interrupts */
      > -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
      > -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
      > +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
      > +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
      >
      >        enable_irq(keypad_data->irq);
      >
      > @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct
      > platform_device *pdev)
      >        struct resource *res;
      >        resource_size_t size;
      >        unsigned int row_shift, max_keys;
      > +       int rev;
      >        int irq;
      >        int error;
      >
      > @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct
      > platform_device *pdev)
      >        keypad_data->rows = pdata->rows;
      >        keypad_data->cols = pdata->cols;
      >
      > +       /*
      > +       * Enable clocks for the keypad module so that we can read
      > +       * revision register.
      > +       */
      > +       pm_runtime_enable(&pdev->dev);
      > +       error = pm_runtime_get_sync(&pdev->dev);
      > +       if (error) {
      > +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
      > +               goto err_unmap;
      > +       }
      > +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
      > +       rev &= 0x03 << 30;
      > +       rev >>= 30;
      > +       switch (rev) {
      > +       case KBD_REVISION_OMAP4:
      > +               keypad_data->reg_offset = 0x00;
      > +               keypad_data->irqreg_offset = 0x00;
      > +               break;
      > +       case KBD_REVISION_OMAP5:
      > +               keypad_data->reg_offset = 0x10;
      > +               keypad_data->irqreg_offset = 0x0c;
      > +               break;
      > +       default:
      > +               dev_err(&pdev->dev,
      > +                       "Keypad reports unsupported revision %d", rev);
      > +               error = -EINVAL;
      > +               goto err_pm_put_sync;
      > +       }
      > +
      >        /* input device allocation */
      >        keypad_data->input = input_dev = input_allocate_device();
      >        if (!input_dev) {
      >                error = -ENOMEM;
      > -               goto err_unmap;
      > +               goto err_pm_put_sync;
      >        }
      >
      >        input_dev->name = pdev->name;
      > @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct
      > platform_device *pdev)
      >                        input_dev->keycode, input_dev->keybit);
      >
      >        error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
      > -                            IRQF_TRIGGER_RISING,
      > +                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
      Sorry, " IRQF_DISABLED" got included by mistake.
      Removing this stray change and sending it again.
      
      >                             "omap4-keypad", keypad_data);
      >        if (error) {
      >                dev_err(&pdev->dev, "failed to register interrupt\n");
      >                goto err_free_input;
      >        }
      >
      > -       pm_runtime_enable(&pdev->dev);
      > +       pm_runtime_put_sync(&pdev->dev);
      >
      >        error = input_register_device(keypad_data->input);
      >        if (error < 0) {
      > @@ -296,6 +360,8 @@ err_pm_disable:
      >        free_irq(keypad_data->irq, keypad_data);
      >  err_free_input:
      >        input_free_device(input_dev);
      > +err_pm_put_sync:
      > +       pm_runtime_put_sync(&pdev->dev);
      >  err_unmap:
      >        iounmap(keypad_data->base);
      >  err_release_mem:
      >
      >
      > ~Sourav
      >
      > On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov
      > <dmitry.torokhov@gmail.com> wrote:
      >>> Hi Dmitry ,
      >>>
      >>>
      >>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov
      >>> <dmitry.torokhov@gmail.com> wrote:
      >>> > Ho Sourav,
      >>> >
      >>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote:
      >>> >>
      >>> >> -config KEYBOARD_OMAP4
      >>> >> -     tristate "TI OMAP4 keypad support"
      >>> >> +config KEYBOARD_OMAP4+
      >>> >
      >>> > I think this works purely by accident - '+' sign getting dropped by
      >>> > parser...
      >>> >
      >>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input)
      >>> >>
      >>> >>       disable_irq(keypad_data->irq);
      >>> >>
      >>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
      >>> >> -                     keypad_data->base + OMAP4_KBD_CTRL);
      >>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
      >>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
      >>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE,
      >>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS);
      >>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
      >>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE);
      >>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
      >>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
      >>> >> +     keypad_data->revision = kbd_read_revision(keypad_data,
      >>> >> +                     OMAP4_KBD_REVISION);
      >>> >> +     switch (keypad_data->revision) {
      >>> >> +     case 1:
      >>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c;
      >>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c;
      >>> >> +             keypad_data->reg_offset = 0x10;
      >>> >> +             break;
      >>> >
      >>> > This should be done in probe().
      >>> >
      >>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying
      >>> to read the keypad revision register.?
      >>
      >> Ah, indeed, but I think not pm_runtime_get_sync() but
      >> pm_runtime_set_active().
      >>
      >> Not sure if this will fix the crash...
      >>
      >> --
      >> Dmitry
      >>
      >>
      >> Input: omap-keypad - dynamically handle register offsets
      >>
      >> From: G, Manjunath Kondaiah <manjugk@ti.com>
      >>
      >> Keypad controller register offsets are different for omap4
      >> and omap5. Handle these offsets through static mapping and
      >> assign these mappings during run time.
      >>
      >> Tested on omap4430 sdp with 3.4-rc3.
      >> Tested on omap5430evm with 3.1-custom kernel.
      >>
      >> Signed-off-by: Felipe Balbi <balbi@ti.com>
      >> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
      >> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
      >> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
      >> ---
      >>
      >>  drivers/input/keyboard/Kconfig        |    4 +
      >>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++-------
      >>  2 files changed, 94 insertions(+), 27 deletions(-)
      >>
      >>
      >> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
      >> index 20a3753..84ee155 100644
      >> --- a/drivers/input/keyboard/Kconfig
      >> +++ b/drivers/input/keyboard/Kconfig
      >> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP
      >>          module will be called omap-keypad.
      >>
      >>  config KEYBOARD_OMAP4
      >> -       tristate "TI OMAP4 keypad support"
      >> +       tristate "TI OMAP4+ keypad support"
      >>        help
      >> -         Say Y here if you want to use the OMAP4 keypad.
      >> +         Say Y here if you want to use the OMAP4+ keypad.
      >>
      >>          To compile this driver as a module, choose M here: the
      >>          module will be called omap4-keypad.
      >> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
      >> index e809ac0..c9fd0df 100644
      >> --- a/drivers/input/keyboard/omap4-keypad.c
      >> +++ b/drivers/input/keyboard/omap4-keypad.c
      >> @@ -68,19 +68,52 @@
      >>
      >>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
      >>
      >> +enum {
      >> +       KBD_REVISION_OMAP4 = 0,
      >> +       KBD_REVISION_OMAP5,
      >> +};
      >> +
      >>  struct omap4_keypad {
      >>        struct input_dev *input;
      >>
      >>        void __iomem *base;
      >> -       int irq;
      >> +       unsigned int irq;
      >>
      >>        unsigned int rows;
      >>        unsigned int cols;
      >> +       u32 reg_offset;
      >> +       u32 irqreg_offset;
      >>        unsigned int row_shift;
      >>        unsigned char key_state[8];
      >>        unsigned short keymap[];
      >>  };
      >>
      >> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
      >> +{
      >> +       return __raw_readl(keypad_data->base +
      >> +                               keypad_data->reg_offset + offset);
      >> +}
      >> +
      >> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
      >> +{
      >> +       __raw_writel(value,
      >> +                    keypad_data->base + keypad_data->reg_offset + offset);
      >> +}
      >> +
      >> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
      >> +{
      >> +       return __raw_readl(keypad_data->base +
      >> +                               keypad_data->irqreg_offset + offset);
      >> +}
      >> +
      >> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
      >> +                            u32 offset, u32 value)
      >> +{
      >> +       __raw_writel(value,
      >> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
      >> +}
      >> +
      >> +
      >>  /* Interrupt handler */
      >>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
      >>  {
      >> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
      >>        u32 *new_state = (u32 *) key_state;
      >>
      >>        /* Disable interrupts */
      >> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
      >> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      >> +                        OMAP4_VAL_IRQDISABLE);
      >>
      >> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
      >> -       *(new_state + 1) = __raw_readl(keypad_data->base
      >> -                                               + OMAP4_KBD_FULLCODE63_32);
      >> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
      >> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
      >>
      >>        for (row = 0; row < keypad_data->rows; row++) {
      >>                changed = key_state[row] ^ keypad_data->key_state[row];
      >> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
      >>                sizeof(keypad_data->key_state));
      >>
      >>        /* clear pending interrupts */
      >> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
      >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
      >> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
      >>
      >>        /* enable interrupts */
      >> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
      >> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      >> +               OMAP4_DEF_IRQENABLE_EVENTEN |
      >> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
      >>
      >>        return IRQ_HANDLED;
      >>  }
      >> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
      >>
      >>        disable_irq(keypad_data->irq);
      >>
      >> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
      >> -                       keypad_data->base + OMAP4_KBD_CTRL);
      >> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
      >> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
      >> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
      >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
      >> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
      >> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
      >> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
      >> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
      >> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
      >> +                       OMAP4_VAL_FUNCTIONALCFG);
      >> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
      >> +                       OMAP4_VAL_DEBOUNCINGTIME);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
      >> +                       OMAP4_VAL_IRQDISABLE);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      >> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
      >> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
      >> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
      >> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
      >>
      >>        enable_irq(keypad_data->irq);
      >>
      >> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
      >>        disable_irq(keypad_data->irq);
      >>
      >>        /* Disable interrupts */
      >> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
      >> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
      >> +                        OMAP4_VAL_IRQDISABLE);
      >>
      >>        /* clear pending interrupts */
      >> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
      >> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
      >> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
      >> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
      >>
      >>        enable_irq(keypad_data->irq);
      >>
      >> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
      >>        struct resource *res;
      >>        resource_size_t size;
      >>        unsigned int row_shift, max_keys;
      >> +       int rev;
      >>        int irq;
      >>        int error;
      >>
      >> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
      >>        keypad_data->rows = pdata->rows;
      >>        keypad_data->cols = pdata->cols;
      >>
      >> +       /*
      >> +        * Mark device as active (and wake up its parent) so we can read
      >> +        * revision register.
      >> +        */
      >> +       error = pm_runtime_set_active(&pdev->dev);
      >> +       if (error) {
      >> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n");
      >> +               goto err_unmap;
      >> +       }
      >> +
      >> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
      >> +       rev &= 0x03 << 30;
      >> +       rev >>= 30;
      >> +       switch (rev) {
      >> +       case KBD_REVISION_OMAP4:
      >> +               keypad_data->reg_offset = 0x00;
      >> +               keypad_data->irqreg_offset = 0x00;
      >> +               break;
      >> +       case KBD_REVISION_OMAP5:
      >> +               keypad_data->reg_offset = 0x10;
      >> +               keypad_data->irqreg_offset = 0x0c;
      >> +               break;
      >> +       default:
      >> +               dev_err(&pdev->dev,
      >> +                       "Keypad reports unsupported revision %d", rev);
      >> +               error = -EINVAL;
      >> +               goto err_pm_suspended;
      >> +       }
      >> +
      >>        /* input device allocation */
      >>        keypad_data->input = input_dev = input_allocate_device();
      >>        if (!input_dev) {
      >>                error = -ENOMEM;
      >> -               goto err_unmap;
      >> +               goto err_pm_suspended;
      >>        }
      >>
      >>        input_dev->name = pdev->name;
      >> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
      >>        }
      >>
      >>        pm_runtime_enable(&pdev->dev);
      >> +       pm_runtime_put_sync(&pdev->dev);
      >>
      >>        error = input_register_device(keypad_data->input);
      >>        if (error < 0) {
      >> @@ -296,6 +361,8 @@ err_pm_disable:
      >>        free_irq(keypad_data->irq, keypad_data);
      >>  err_free_input:
      >>        input_free_device(input_dev);
      >> +err_pm_suspended:
      >> +       pm_runtime_set_suspended(&pdev->dev);
      >>  err_unmap:
      >>        iounmap(keypad_data->base);
      >>  err_release_mem:
      
      From: G, Manjunath Kondaiah <manjugk@ti.com>
      Date: Mon, 10 Oct 2011 20:52:05 +0530
      Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets
      
      Keypad controller register offsets are different for omap4
      and omap5. Handle these offsets through static mapping and
      assign these mappings during run time.
      
      Tested on omap4430 sdp with 3.4-rc3.
      Tested on omap5430evm with 3.1-custom kernel.
      
      Cc: Andrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
      Signed-off-by: default avatarG, Manjunath Kondaiah <manjugk@ti.com>
      Signed-off-by: default avatarSourav Poddar <sourav.poddar@ti.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      f77621cc
    • JJ Ding's avatar
      Input: synaptics - fix compile warning · 1a49a0a0
      JJ Ding authored
      Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of
      a compile warning when we don't select synaptics support.
      
      drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function]
      Signed-off-by: default avatarJJ Ding <dgdunix@gmail.com>
      Reviewed-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      1a49a0a0
    • Dmitry Torokhov's avatar
      MAINTAINERS: adjust input-related patterns · f4eea7e2
      Dmitry Torokhov authored
      Add pattens for input-related headers to MAINTAINERS file.
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      f4eea7e2
    • Dmitry Torokhov's avatar
      Input: ALPS - switch to using input_mt_report_finger_count · 616575c2
      Dmitry Torokhov authored
      Instead of open-coded reporting number of fingers on the touchpad
      let's use input_mt_report_finger_count() helper.
      Acked-by: default avatarSeth Forshee <seth.forshee@canonical.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      616575c2
    • George Pantalos's avatar
      Input: ALPS - add semi-MT support for v4 protocol · 3b7e09fa
      George Pantalos authored
      This patch adds semi-MT support for ALPS v4 protocol touchpads.
      It is based on the work by Seth Forshee for ALPS v3 and v4 protocol
      support. Three packets are required to assemble and process the MT
      data. ST events are reported at once to avoid latency. If there
      were two contacts or more, report MT data instead of ST events.
      
      Thanks to Seth Forshee for providing most of the code, guidance
      and insight for producing this patch.
      Signed-off-by: default avatarGeorge Pantalos <gpantalos@gmail.com>
      Acked-by: default avatarSeth Forshee <seth.forshee@canonical.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      3b7e09fa
    • Paul Parsons's avatar
      Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver · ae99ea56
      Paul Parsons authored
      This driver adds support for the Synaptics NavPoint touchpad connected
      to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
      a tap or tap-and-a-half drag gesture emulates the left mouse button.
      For example, use the xf86-input-evdev driver for an X pointing device.
      Signed-off-by: default avatarPaul Parsons <lost.distance@yahoo.com>
      Tested-by: default avatarPhilipp Zabel <philipp.zabel@gmail.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      ae99ea56
    • Daniel Kurtz's avatar
      Input: atmel_mxt_ts - dump each message on just 1 line · 6ee3dbf9
      Daniel Kurtz authored
      Helps ensure all bytes for a single message together in the system log.
      Signed-off-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
      Reviewed-by: default avatarJoonyoung Shim <jy0922.shim@samsung.com>
      Acked-by: default avatarNick Dyer <nick.dyer@itdev.co.uk>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      6ee3dbf9
    • Daniel Kurtz's avatar
      Input: atmel_mxt_ts - do not read extra (checksum) byte · 822115ff
      Daniel Kurtz authored
      atmel_mxt devices will send a checksum byte at the end of a message if
      the MSB of the object address is set.
      However, since this driver does not set this bit, the checksum byte
      isn't actually sent, so don't even try to read it.
      Signed-off-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      822115ff
    • Daniel Kurtz's avatar
      Input: atmel_mxt_ts - verify object size in mxt_write_object · d1ff320f
      Daniel Kurtz authored
      Don't allow writing past the length of an object.
      Signed-off-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      d1ff320f
    • Daniel Kurtz's avatar
      Input: atmel_mxt_ts - only allow root to update firmware · 71b3e938
      Daniel Kurtz authored
      Restrict permissions on the update_fw sysfs entry to read only for root
      only.
      
      Also, update object permission to use a macro S_IRUGO macro instead of
      hard coded 0444.
      Signed-off-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
      Reviewed-by: default avatarJoonyoung Shim <jy0922.shim@samsung.com>
      Acked-by: default avatarNick Dyer <nick.dyer@itdev.co.uk>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      71b3e938
    • Daniel Kurtz's avatar
      Input: atmel_mxt_ts - use CONFIG_PM_SLEEP · 3a73c816
      Daniel Kurtz authored
      Simple cleanup to use newer PM APIs.
      Signed-off-by: default avatarDaniel Kurtz <djkurtz@chromium.org>
      Reviewed-by: default avatarJoonyoung Shim <jy0922.shim@samsung.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      3a73c816
    • Tai-hwa Liang's avatar
      Input: sentelic - report device's production serial number · d3132c5c
      Tai-hwa Liang authored
      Hardware since Cx supports an unique identity (used to identify OEM vendors
      and released lot number) which is very helpful for diagnostic purpose.
      This revision tries to make it as a part of driver boot up message.
      
      Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of
      absolute coordinates output.
      Signed-off-by: default avatarTai-hwa Liang <avatar@sentelic.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      d3132c5c
    • Peter Ujfalusi's avatar
      Input: tl6040-vibra - Device Tree support · 9ac7b1a3
      Peter Ujfalusi authored
      Enable DT based probing of the vibra driver.
      
      Example of dts section to load the twl6040-vibra driver:
      twl6040: twl6040@4b {
      	...
      	twl6040_vibra: twl6040@1 {
      		compatible = "ti,twl6040-vibra";
      		interrupts = <4>;
      		vddvibl-supply = <&vbat>;
      		vddvibr-supply = <&vbat>;
      		vibldrv_res = <8>;
      		vibrdrv_res = <3>;
      		viblmotor_res = <10>;
      		vibrmotor_res = <10>;
      	};
      };
      
      [Sasha Levin <levinsasha928@gmail.com>: fixed build error]
      Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
      Signed-off-by: default avatarDmitry Torokhov <dtor@mail.ru>
      9ac7b1a3
  7. 02 May, 2012 7 commits
  8. 30 Apr, 2012 1 commit