We have architectures where the size of page_to_pfn and pfn_to_page are
significant enough to overall image size that they wish to push them out of
line.  However, in the process we have grown a second copy of the
implementation of each of these routines for each memory model.  Share the
implmentation exposing it either inline or out-of-line as required.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In current code, zonelist is considered to be build once, no modification.
But MemoryHotplug can add new zone/pgdat.  It must be updated.

This patch modifies build_all_zonelists().  By this, build_all_zonelist() can
reconfig pgdat's zonelists.

To update them safety, this patch use stop_machine_run().  Other cpus don't
touch among updating them by using it.

In old version (V2 of node hotadd), kernel updated them after zone
initialization.  But present_page of its new zone is still 0, because
online_page() is not called yet at this time.  Build_zonelists() checks
present_pages to find present zone.  It was too early.  So, I changed it after
online_pages().
Signed-off-by: Yasunori Goto     <y-goto@jp.fujitsu.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Wait_table is initialized according to zone size at boot time.  But, we cannot
know the maixmum zone size when memory hotplug is enabled.  It can be
changed....  And resizing of wait_table is hard.

So kernel allocate and initialzie wait_table as its maximum size.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] wait_table and zonelist initializing for memory hotadd: add return code for init_current_empty_zone

When add_zone() is called against empty zone (not populated zone), we have to
initialize the zone which didn't initialize at boot time.  But,
init_currently_empty_zone() may fail due to allocation of wait table.  So,
this patch is to catch its error code.

Changes against wait_table is in the next patch.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

[PATCH] wait_table and zonelist initializing for memory hotadd: change to meminit for build_zonelist

Change definitions of some functions and data from __init to __meminit.

These functions and data can be used after bootup by this patch to be used for
hot-add codes.
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is just to rename from wait_table_size() to wait_table_hash_nr_entries().
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove two unnecessary PageSwapCache checks.  The page refcount is raised
and therefore page migration cannot occur in both functions.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Clean up slab allocator page mapping a bit.  The memory allocated for a
slab is physically contiguous so it is okay to assume struct pages are too
so kill the long-standing comment.  Furthermore, rename set_slab_attr to
slab_map_pages and add a comment explaining why its needed.
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

As Nick points out, only ia64 uses PG_uncached.  So we can push it up into the
higher bits of the lower half of page->flags and make room for another flag on
32-bit machines.

Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Jesse Barnes <jbarnes@sgi.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move alien object freeing to cache_free_alien() to reduce #ifdef clutter in
__cache_free().
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It is better to redo the complete fault if do_swap_page() finds that the
page is not in PageSwapCache() because the page migration code may have
replaced the swap pte already with a pte pointing to valid memory.

do_swap_page() may interpret an invalid swap entry without this patch
because we do not reload the pte if we are looping back.  The page
migration code may already have reused the swap entry referenced by our
local swp_entry.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The buddy allocator has a requirement that boundaries between contigious
zones occur aligned with the the MAX_ORDER ranges.  Where they do not we
will incorrectly merge pages cross zone boundaries.  This can lead to pages
from the wrong zone being handed out.

Originally the buddy allocator would check that buddies were in the same
zone by referencing the zone start and end page frame numbers.  This was
removed as it became very expensive and the buddy allocator already made
the assumption that zones boundaries were aligned.

It is clear that not all configurations and architectures are honouring
this alignment requirement.  Therefore it seems safest to reintroduce
support for non-aligned zone boundaries.  This patch introduces a new check
when considering a page a buddy it compares the zone_table index for the
two pages and refuses to merge the pages where they do not match.  The
zone_table index is unique for each node/zone combination when
FLATMEM/DISCONTIGMEM is enabled and for each section/zone combination when
SPARSEMEM is enabled (a SPARSEMEM section is at least a MAX_ORDER size).
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu.
in xfs.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Enable XFS to limit the statfs() results to the project quota covering the
dentry used as a base for call.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Give the statfs superblock operation a dentry pointer rather than a superblock
pointer.

This complements the get_sb() patch.  That reduced the significance of
sb->s_root, allowing NFS to place a fake root there.  However, NFS does
require a dentry to use as a target for the statfs operation.  This permits
the root in the vfsmount to be used instead.

linux/mount.h has been added where necessary to make allyesconfig build
successfully.

Interest has also been expressed for use with the FUSE and XFS filesystems.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Extend the get_sb() filesystem operation to take an extra argument that
permits the VFS to pass in the target vfsmount that defines the mountpoint.

The filesystem is then required to manually set the superblock and root dentry
pointers.  For most filesystems, this should be done with simple_set_mnt()
which will set the superblock pointer and then set the root dentry to the
superblock's s_root (as per the old default behaviour).

The get_sb() op now returns an integer as there's now no need to return the
superblock pointer.

This patch permits a superblock to be implicitly shared amongst several mount
points, such as can be done with NFS to avoid potential inode aliasing.  In
such a case, simple_set_mnt() would not be called, and instead the mnt_root
and mnt_sb would be set directly.

The patch also makes the following changes:

 (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount
     pointer argument and return an integer, so most filesystems have to change
     very little.

 (*) If one of the convenience function is not used, then get_sb() should
     normally call simple_set_mnt() to instantiate the vfsmount. This will
     always return 0, and so can be tail-called from get_sb().

 (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the
     dcache upon superblock destruction rather than shrink_dcache_anon().

     This is required because the superblock may now have multiple trees that
     aren't actually bound to s_root, but that still need to be cleaned up. The
     currently called functions assume that the whole tree is rooted at s_root,
     and that anonymous dentries are not the roots of trees which results in
     dentries being left unculled.

     However, with the way NFS superblock sharing are currently set to be
     implemented, these assumptions are violated: the root of the filesystem is
     simply a dummy dentry and inode (the real inode for '/' may well be
     inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries
     with child trees.

     [*] Anonymous until discovered from another tree.

 (*) The documentation has been adjusted, including the additional bit of
     changing ext2_* into foo_* in the documentation.

[akpm@osdl.org: convert ipath_fs, do other stuff]
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

I have seen the cdrom drive appearing confused on using kdump on certain
x86_64 systems.  During the booting up of the second kernel, the following
message would keep flooding the console, and the booting would not proceed
any further.

hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01)

In this patch, whenever we are hitting a confused state in the interrupt
handler with the DRQ set, we end the request and return ide_stopped.  Using
this I dont see the status error.
Signed-off-by: Rachita Kothiyal <rachita@in.ibm.com>
Acked-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  [PATCH] Driver core: fix locking issues with the devices that are attached to classes
  [PATCH] USB: get USB suspend to work again

Doh, that was foolish...
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Yeah, it's a hack, but it is only temporary until Alan's patches
reworking this area make it in.  We really should not care what devices
below us are doing, especially when we do not really know what type of
devices they are.  This patch relies on the fact that the endpoint
devices do not have a driver assigned to us.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-mmc:
  [ARM] 3565/1: AT91RM9200 MMC update
  [MMC] Convert all hosts except mmci to use data->blksz

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits)
  [ARM] 3629/1: S3C24XX: fix missing bracket in regs-dsc.h
  [ARM] 3537/1: Rework DMA-bounce locking for finer granularity
  [ARM] 3601/1: i.MX/MX1 DMA error handling for signaled channels only
  [ARM] 3597/1: ixp4xx/nslu2: Board support for new LED subsystem
  [ARM] 3595/1: ixp4xx/nas100d: Board support for new LED subsystem
  [ARM] 3626/1: ARM EABI: fix syscall restarting
  [ARM] 3628/1: S3C24XX: add get_rate call to struct clk
  [ARM] 3627/1: S3C24XX: split s3c2410 clocks from core clocks
  [ARM] 3613/1: S3C2410: Add sysdev and sysclass
  [ARM] 3624/1: Report true modem control line states
  [ARM] 3620/2: ixp23xx: add uengine loader support
  [ARM] 3618/1: add defconfig for logicpd pxa270 card engine
  [ARM] 3617/1: ep93xx: fix slightly incorrect timer tick rate
  [ARM] 3616/1: fix timer handler wrap logic for a number of platforms
  [ARM] 3615/1: ixp23xx: use platform devices for physmap flash
  [ARM] 3614/1: ep93xx: use platform devices for physmap flash
  [ARM] 3621/1: fix compilation breakage for pnx4008
  [ARM] 3623/1: pnx4008: move GPIO-related defines to gpio.h
  [ARM] 3622/1: pnx4008: remove clk_use/clk_unuse
  [ARM] Enable VFP to be built when non-VFP capable CPUs are selected
  ...

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-serial:
  [ARM] 3600/1: increase amba-pl010 UART_NR to 8
  [ARM] 3571/1: netX: serial driver for Hilscher netX

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix ondemand vs suspend deadlock
  [CPUFREQ] Fix powernow-k8 SMP kernel on UP hardware bug.
  [PATCH] redirect speedstep-centrino maintainer mail to cpufreq list
  [CPUFREQ] correct powernow-k8 fid/vid masks for extended parts
  [CPUFREQ] Clarify powernow-k8 cpu_family statements

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (33 commits)
  [PATCH] myri10ge - drop workaround pci_save_state() disabling MSI
  [PATCH] myri10ge - drop workaround for the missing AER ext cap on nVidia CK804
  via-velocity: the link is not correctly detected when the device starts
  [PATCH] add b44 to maintainers
  [PATCH] WAN: ioremap() failure checks in drivers
  [PATCH] WAN: register_hdlc_device() doesn't need dev_alloc_name()
  [PATCH] skb_padto()-area fixes in 8390, wavelan
  [PATCH] make drivers/net/forcedeth.c:nv_update_pause() static
  [PATCH] network driver for Hilscher netx
  [PATCH] Dereference in tokenring/olympic.c
  [PATCH] Array overrun in drivers/net/wireless/wavelan.c
  [PATCH] Remove useless check in drivers/net/pcmcia/xirc2ps_cs.c
  [PATCH] 8139cp: add ethtool eeprom support
  [PATCH] 8139cp: fix eeprom read command length
  [PATCH] b44: update b44 Kconfig entry
  [PATCH] b44: update version to 1.01
  [PATCH] b44: add wol for old nic
  [PATCH] b44: add parameter
  [PATCH] b44: add wol
  [PATCH] b44: fix manual speed/duplex/autoneg settings
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits)
  [POWERPC] re-enable OProfile for iSeries, using timer interrupt
  [POWERPC] support ibm,extended-*-frequency properties
  [POWERPC] Extra sanity check in EEH code
  [POWERPC] Dont look for class-code in pci children
  [POWERPC] Fix mdelay badness on shared processor partitions
  [POWERPC] disable floating point exceptions for init
  [POWERPC] Unify ppc syscall tables
  [POWERPC] mpic: add support for serial mode interrupts
  [POWERPC] pseries: Print PCI slot location code on failure
  [POWERPC] spufs: one more fix for 64k pages
  [POWERPC] spufs: fail spu_create with invalid flags
  [POWERPC] spufs: clear class2 interrupt status before wakeup
  [POWERPC] spufs: fix Makefile for "make clean"
  [POWERPC] spufs: remove stop_code from struct spu
  [POWERPC] spufs: fix spu irq affinity setting
  [POWERPC] spufs: further abstract priv1 register access
  [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts
  [POWERPC] spufs: dont try to access SPE channel 1 count
  [POWERPC] spufs: use kzalloc in create_spu
  [POWERPC] spufs: fix initial state of wbox file
  ...

Manually resolved conflicts in:
	drivers/net/phy/Makefile
	include/asm-powerpc/spu.h

We don't need to restore the state right after saving it for later recovery
since commit 99dc804d (PCI: disable msi mode
in pci_disable_device) now prevents pci_save_state() from disabling MSI.
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

We don't need to hardcode the AER capability of the nVidia CK804 chipset
anymore since commit cf34a8e0 (PCI: nVidia
quirk to make AER PCI-E extended capability visible) now makes sure that
this cap will be available to pci_find_ext_capability().
Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Add b44 to the MAINTAINERS file.
Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Eric Sesterhenn found that pci200syn initialization lacks return
statement in ioremap() error path (coverity bug id #195). It looks
like more WAN drivers have problems with ioremap().
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

David Boggs noticed that register_hdlc_device() no longer needs
to call dev_alloc_name() as it's called by register_netdev().
register_hdlc_device() is currently equivalent to register_netdev().

hdlc_setup() is now EXPORTed as per David's request.
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Ar Iau, 2006-06-22 am 21:29 +1000, ysgrifennodd Herbert Xu:
> Alan Cox <alan@lxorguk.ukuu.org.uk> wrote:
> >
> > The 8390 change (corrected version) also makes 8390.c faster so should
> > be applied anyway, and the orinoco one fixes some code that isn't even
> > needed and someone forgot to remove long ago. Otherwise the skb_padto
>
> Yeah I agree totally.  However, I haven't actually seen the fixed 8390
> version being posted yet or at least not to netdev :)

Ah the resounding clang of a subtle hint ;)
Signed-off-by: Alan Cox <alan@redhat.com>

- Return 8390.c to the old way of handling short packets (which is also
faster)

- Remove the skb_padto from orinoco. This got left in when the padding bad
write patch was added and is actually not needed. This is fixing a merge
error way back when.

- Wavelan can also use the stack based buffer trick if you want
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This patch makes the needlessly global nv_update_pause() static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

This is a patch for the Hilscher netx builtin ethernet ports. The
netx board support was merged into 2.6.17-git2.
The netx is a arm926 based SoC.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

--
 drivers/net/Kconfig             |   11
 drivers/net/Makefile            |    1
 drivers/net/netx-eth.c          |  516 ++++++++++++++++++++++++++++++++++++++++
 include/asm-arm/arch-netx/eth.h |   27 ++
 4 files changed, 555 insertions(+)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

hi,

coverity found (bug id #225) that we might call free_netdev()
with NULL argument, when alloc_trdev() fails. This patch
changes the goto, so we dont call free_netdev() for
dev == NULL.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

hi,

this is another array overrun spotted by coverity (#id 507)
we should check the index against array size before using it.
Not sure why the driver doesnt use ARRAY_SIZE instead of its
own macro.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

hi,

coverity choked at this check (id #223), assuming that
skb might be NULL and used anyways later. Since
start_hard_xmit() always gets called with a valid
skb, the check is useless and this patch removes it.
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Implement the ethtool eeprom operations for the 8139cp driver.
Tested on x86 and big-endian ARM.
Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

The read command for the 93C46/93C56 EEPROMS should be 3 bits plus
the address.  This doesn't appear to affect the operation of the
read command, but similar errors for write commands do cause failures.
Signed-off-by: Philip Craig <philipc@snapgear.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>