This is a base for the DT updates, merged through the arm-soc
cleanup branch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'nomadik-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Merge "Nomadik updates for the v3.19 series" from Linus Walleij:

Nomadik changes for the v3.19 development series:
- Rearrange the DTS files to make a pure SoC-specific file and
  a pure board file for S8815.
- Add the device tree for the NDK15 board.
- Update the defconfig and configure in the STMPE expander by
  default on the Nomadik.

* tag 'nomadik-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: configure in STMPE support
  ARM: update Nomadik config
  ARM: nomadik: device tree for NHK15 board
  ARM: nomadik: push ethernet down to board
  ARM: nomadik: set up MCDATDIR2
  ARM: nomadik: move GPIO I2C to S8815 board file
  ARM: nomadik: disable chrystals in top level board files
  ARM: nomadik: move MMC/SD card detect GPIO to board DTS
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "at91: dt for 3.19 #1" from Nicolas Ferre:

"Very little DT update for AT91. More will come but I want to send this first
batch soon so it doesn't get in the way of larger modifications."

First DT batch for 3.19:
- CAN device nodes for at91sam9263 and at91sam9x5
- at91sam9x5 DMA definitions for usart

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: at91/dt: at91sam9263: Add CAN device nodes
  ARM: at91/dt: at91sam9x5: Add CAN device nodes
  ARM: at91/dt/trivial: at91sam9x5_can.dtsi: comment and whitespace fixes
  ARM: at91: at91sam9x5 dt: add usart dma definitions to dt
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "ARM: berlin: DT changes for v3.19 (round 1)" from Sebastian Hesselbarth:

"This is Berlin DT changes for v3.19 and contains those patches that missed
the v3.18 merge window plus corresponding patches to catch-up with Antoine's
BG2Q improvements for BG2 and BG2CD. We now have working SDHCI and Ethernet
on all SoCs (well, BG2CD has HDMI HEC only), SATA PHY support for BG2 is still
pending."

Berlin DT changes for v3.19 (round 1)
- AHCI and SATA PHY nodes for BG2Q
- Reset controller binding docs
- Ethernet nodes for BG2, BG2CD
- SDHCI nodes for BG2, BG2CD
- Corresponding board changes to enable AHCI, Ethernet, SDHCI

* tag 'berlin-dt-3.19-1' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: dts: berlin: Enable eMMC on Sony NSZ-GS7
  ARM: dts: berlin: Enable WiFi on Google Chromecast
  ARM: dts: berlin: Add SDHCI controller nodes to BG2/BG2CD
  ARM: dts: berlin: Enable ethernet on Sony NSZ-GS7
  ARM: dts: berlin: Add phy-connection-type to BG2Q Ethernet
  ARM: dts: berlin: Add BG2CD ethernet DT nodes
  ARM: dts: berlin: Add BG2 ethernet DT nodes
  ARM: dts: berlin: Add GPIO leds to Google Chromecast
  ARM: dts: berlin: enable timer 1 for sched_clock
  ARM: dts: berlin: add a required reset property in the chip controller node
  Documentation: bindings: add reset bindings docs for Marvell Berlin SoCs
  ARM: dts: berlin: enable the eSATA interface on the BG2Q DMP
  ARM: dts: berlin: add the AHCI node for the BG2Q
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "STi DT updates for v3.19, round 1" from Maxime Coquelin:

Highlights:
-----------
 - Add SDHCI support for STiH41x B2020 boards
 - Add reset controllers to STiH407 SoC
 - Add MiPHY & SATA support to STiH416
 - Add Thermal supportto STiH416
 - Add Clock support to STiH407 SoC

This tag also includes STiH407 bindings definitions for reset controller.

* tag 'sti-dt-for-v3.19-1' of git://git.stlinux.com/devel/kernel/linux-sti:
  ARM: STi: DT: STiH407: Fix: clk-tmds-hdmi clock is missing
  ARM: STi: DT: STiH407: Add all defines for STiH407 DT clocks
  ARM: STi: DT: STiH407: 407 DT Entry for clockgenA9
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen D0/D2/D3
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen C0
  ARM: STi: DT: STiH407: 407 DT Entry for clockgen A0
  ARM: DT: STi: STiH416: Add DT node for ST's SATA device
  ARM: DT: STi: STiH416: Add DT node for MiPHY365x
  ARM: STi: DT: STiH416: Supply Thermal Controller Device Tree nodes
  ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards.
  ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs
  ARM: STi: DT: Add sdhci controller for stih415
  ARM: STi: DT: Add sdhci pin configuration for stih415
  ARM: STi: DT: Add sdhci controller for stih416
  ARM: STi: DT: Add sdhci pins for stih416
  ARM: sti: Add STiH407 reset controller support.
  ARM: sti: Add STiH407 Kconfig entry to select STIH407_RESET
  ARM: STi: DT: STiH41x: Convert all uppercase non-defines to lowercase
  reset: stih407: Add reset controllers DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge "Broadcom Cygnus SoC Device Tree changes" from Florian Fianelli:

This patchset contains initial support for Broadcom's Cygnus SoC based on our
iProc architecture. Initial support is minimal and includes just the mach
platform code, clock driver, and a basic device tree configuration. Peripheral
drivers will be submitted soon, as will device tree configurations for other
Cygnus board variants.

These are the Device Tree changes

* tag 'arm-soc/for-3.18/cygnus-dts-v9' of http://github.com/brcm/linux:
  ARM: dts: Enable Broadcom Cygnus SoC
  dt-bindings: Document Broadcom Cygnus SoC and clocks
Signed-off-by: Olof Johansson <olof@lixom.net>

This enables the STMPE MFD, GPIO and keypad support by default on
the Nomadik builds. This expander is used on the NDK 15 board.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This updates the Nomadik (NHK8815) defconfig to what saveconfig
produces after some recent changes to Kconfig fragments here
and there.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-dt-clocksource-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Clocksource Updates for v3.19" from Simon
Horman:

* sh_mtu2: Drop incorrect SoC family name
* sh_tmu: Document r8a7778 and r8a7740 bindings

* tag 'renesas-dt-clocksource-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  clocksource: sh_mtu2: Drop incorrect SoC family name
  clocksource: sh_tmu: Document r8a7778 binding
  clocksource: sh_tmu: Document R-Mobile r8a7740 binding
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v3.19-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Merge "first bunch on Rockchip dt changes" from Heiko Stübner:

First hunk of rockchip devicetree patches, containing:
- cpu operating points and supplies
- dma support for spi controllers
- i2s on rk3066 and rk3188
- default core clock settings for rk3288

* tag 'v3.19-rockchip-dts1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add SPI DMA into rk3288.dtsi
  ARM: dts: rockchip: enable init rate for clock
  ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188
  ARM: dts: rockchip: enable DMA on SPI for rk3066 and rk3188
  ARM: dts: rockchip: add cpu supplies to boards
  ARM: dts: rockchip: add operating points and armclk references
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-r8a73a4-dt-timers-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC r8a73a4 DT Timers Updates for v3.19" from Simon
Horman:

* Initialise CMT1 timer using DT

* tag 'renesas-r8a73a4-dt-timers-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a73a4: Remove empty r8a73a4_add_dt_devices
  ARM: shmobile: ape6evm-reference: Initialise CMT1 device using DT
  ARM: shmobile: r8a73a4: Rename cmt registration helper
  ARM: shmobile: r8a73a4: Add CMT1 node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-cleanups-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Merge "Renesas ARM Based SoC DT Cleanups for v3.19" from Simon Horman:

* Add chosen/stdout-path to DTS files for shmobile boards
* Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY
  - The corresponding board file has already been removed
* Sort dts nodes by address
* Sort SHMOBILE dtbs alphabetically in Makefile

* tag 'renesas-dt-cleanups-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: kzm9d dts: Add chosen/stdout-path
  ARM: shmobile: kzm9g-reference dts: Add chosen/stdout-path
  ARM: shmobile: alt dts: Add chosen/stdout-path
  ARM: shmobile: koelsch dts: Add chosen/stdout-path
  ARM: shmobile: henninger dts: Add chosen/stdout-path
  ARM: shmobile: lager dts: Add chosen/stdout-path
  ARM: shmobile: marzen dts: Add chosen/stdout-path
  ARM: shmobile: bockw-reference dts: Add chosen/stdout-path
  ARM: shmobile: armadillo800eva dts: Add chosen/stdout-path
  ARM: shmobile: ape6evm-reference dts: Add chosen/stdout-path
  ARM: shmobile: genmai dts: Add chosen/stdout-path
  ARM: shmobile: emev2 dtsi: Add uart* labels for easier referencing
  ARM: shmobile: emev2 dtsi: Use generic names for device nodes
  ARM: shmobile: r7s72100: Remove r7s72100-genmai.dtb for ARCH_SHMOBILE_LEGACY
  ARM: shmobile: r8a73a4: sort dtsi file by address
  ARM: shmobile: kzm9d: sort dts file by address
  ARM: shmobile: r7s72100: sort dtsi file by address
  ARM: shmobile: r8a73a4: Remove spurious dma-multiplexer base addresses
  ARM: dts: Sort SHMOBILE dtbs alphabetically
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt

Merge "RealView DeviceTree support for v3.19" from Linus Walleij:

- Device Tree implementation for the ARM RealView boards
- DTS file for the ARM RealView PB1176
- Updates on top of the same DTS file

* tag 'arm-realview-dt-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: add MMCI to the PB1176 DTS
  ARM: realview: add KMIs to the PB1176 DTS
  ARM: realview: add FPGA UART4 to PB1176 DTS
  ARM: realview: add PL022 SSP/SPI block to PB1176 DTS
  ARM: realview: add RTC clocks to device tree
  ARM: realview: add charlcd to PB1176 device tree
  ARM: realview: add PL061 GPIO to the PB1176 DTS
  ARM: realview: move DT GIC to FPGA node
  ARM: realview: add device tree and bindings for PB1176
  ARM: realview: basic device tree implementation
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt

Merge "1st Round of Samsung DT updates for v3.19" from Kukjin Kim:

Samsung DT updates for v3.19

- add CPU nodes for exynos4210, exynos4212, exynos4412

- exynos4x12-pinctrl: add utility macro to define pin sleep states
- exynos4412-trats2: add Maxim77693 PMIC node, add sleep mode pin
  configuration and keep eMMC regulators soft-disabled

- add new exynos5250-spring DT

- cleanup exynos5250-arndale, exynos5250-smdk5250 and exynos5250-snow

- exynos5250-arndale: fix apparent GPIO typo and simplify USB3503
- exynos5250-snow and exynos Peach boards: add rtc_src clock for RTC

- correct mmc0 capability string exynos5420-peach-pit and exynos5800-
  peach-pi

- exynos3250: add MFC codec nodes

- s3c64xx: enable PWM node by default

* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: dts: add CPU nodes for Exynos4 SoCs
  ARM: dts: add MFC codec device node for exynos3250
  ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2
  ARM: dts: Add sleep mode pin configuration for exynos4412-trats2
  ARM: dts: Add utility macro to define pin sleep states for exynos4x12-pinctrl
  ARM: dts: Keep eMMC regulators soft-disabled for exynos4412-trats2
  ARM: dts: correct the mmc0 capability string for exynos Peach boards
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos5250-snow
  ARM: dts: Add rtc_src clk for s3c-rtc on exynos Peach boards
  ARM: dts: Enable PWM node by default for s3c64xx
  ARM: dts: Add exynos5250-spring device tree
  ARM: dts: Simplify USB3503 on exynos5250-arndale
  ARM: dts: Fix apparent GPIO typo in exynos5250-arndale
  ARM: dts: Clean up exynos5250-arndale
  ARM: dts: Clean up exynos5250-smdk5250
  ARM: dts: Fill in bootargs for exynos5250-snow
  ARM: dts: Clean up exynos5250-snow
  ARM: dts: Prepare node labels for exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>

Add the missing CAN devices node including their pin muxing. The required
clock node already exists.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add the missing CAN devices node including their pin muxing to the shared
.dtsi for at91sam9x5. Actually include this file.
Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

This patch adds usart dma definitions to both dtsi for sam9x5 chips. Without
usage of dma it's unable to catch all bytes on usart receiver.
Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Pull MTD fixes from Brian Norris:
 "Three main MTD fixes for 3.18:

   - A regression from 3.16 which was noticed in 3.17.  With the
     restructuring of the m25p80.c driver and the SPI NOR library
     framework, we omitted proper listing of the SPI device IDs.  This
     means m25p80.c wouldn't auto-load (modprobe) properly when built as
     a module.  For now, we duplicate the device IDs into both modules.

   - The OMAP / ELM modules were depending on an implicit link ordering.
     Use deferred probing so that the new link order (in 3.18-rc) can
     still allow for successful probing.

   - Fix suspend/resume support for LH28F640BF NOR flash"

* tag 'for-linus-20141102' of git://git.infradead.org/linux-mtd:
  mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chips
  mtd: omap: fix mtd devices not showing up
  mtd: m25p80,spi-nor: Fix module aliases for m25p80
  mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id
  mtd: m25p80: get rid of spi_get_device_id

Pull SCSI fixes from James Bottomley:
 "This is a set of six patches consisting of:
   - two MAINTAINER updates
   - two scsi-mq fixs for the old parallel interface (not every request
     is tagged and we need to set the right flags to populate the SPI
     tag message)
   - a fix for a memory leak in scatterlist traversal caused by a
     preallocation update in 3.17
   - an ipv6 fix for cxgbi"

[ The scatterlist fix also came in separately through the block layer tree ]

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  MAINTAINERS: ufs - remove self
  MAINTAINERS: change hpsa and cciss maintainer
  libcxgbi : support ipv6 address host_param
  scsi: set REQ_QUEUE for the blk-mq case
  Revert "block: all blk-mq requests are tagged"
  lib/scatterlist: fix memory leak with scsi-mq

Pull drm fixes from Dave Airlie:
 "Nothing too astounding or major: radeon, i915, vmwgfx, armada and
  exynos.

  Biggest ones:
   - vmwgfx has one big locking regression fix
   - i915 has come displayport fixes
   - radeon has some stability and a memory alloc failure
   - armada and exynos have some vblank fixes"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits)
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs
  drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.
  drm/vmwgfx: Fix hash key computation
  drm/vmwgfx: fix lock breakage
  drm/i915/dp: only use training pattern 3 on platforms that support it
  drm/radeon: remove some buggy dead code
  drm/i915: Ignore VBT backlight check on Macbook 2, 1
  drm/radeon: remove invalid pci id
  drm/radeon: dpm fixes for asrock systems
  radeon: clean up coding style differences in radeon_get_bios()
  drm/radeon: Use drm_malloc_ab instead of kmalloc_array
  drm/radeon/dpm: disable ulv support on SI
  drm/i915: Fix GMBUSFREQ on vlv/chv
  drm/i915: Ignore long hpds on eDP ports
  ...

Pull ARM fixes from Russell King:
 - add the new bpf syscall to ARM.
 - drop a redundant return statement in __iommu_alloc_remap()
 - fix a performance issue noticed by Thomas Petazzoni with
   kmap_atomic().
 - fix an issue with the L2 cache OF parsing code which caused it to
   incorrectly print warnings on each boot, and make the warning text
   more consistent with the rest of the code

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn()
  ARM: 8183/1: l2c: Improve l2c310_of_parse() error message
  ARM: 8181/1: Drop extra return statement
  ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int'
  ARM: enable bpf syscall

Pull kvm fixes from Paolo Bonzini:
 "A small set of x86 fixes.  The most serious is an SRCU lockdep fix.

  A bit late - needed some time to test the SRCU fix, which only came in
  on Friday"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: vmx: defer load of APIC access page address during reset
  KVM: nVMX: Disable preemption while reading from shadow VMCS
  KVM: x86: Fix far-jump to non-canonical check
  KVM: emulator: fix execution close to the segment limit
  KVM: emulator: fix error code for __linearize

Merge branch 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes

This pull-request includes some bug fixes and code cleanups.
Especially, this fixes the bind failure issue occurred when it tries
to re-bind Exynos drm driver after unbound, and the modetest failure
issue incurred by not having a pair to vblank on and off requests.

* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: correct connector->dpms field before resuming
  drm/exynos: enable vblank after DPMS on
  drm/exynos: init kms poll at the end of initialization
  drm/exynos: propagate plane initialization errors
  drm/exynos: vidi: fix build warning
  drm/exynos: remove explicit encoder/connector de-initialization
  drm/exynos: init vblank with real number of crtcs

Pull VFS fixes from Al Viro:
 "A bunch of assorted fixes, most of them followups to overlayfs merge"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ovl: initialize ->is_cursor
  Return short read or 0 at end of a raw device, not EIO
  isofs: don't bother with ->d_op for normal case
  isofs_cmp(): we'll never see a dentry for . or ..
  overlayfs: fix lockdep misannotation
  ovl: fix check for cursor
  overlayfs: barriers for opening upper-layer directory
  rcu: Provide counterpart to rcu_dereference() for non-RCU situations
  staging: android: logger: Fix log corruption regression

The sk_prot is irda's own set of protocol handlers, so irda should
statically know what that function is anyway, without using an indirect
pointer.  And as it happens, we know *exactly* what that pointer is
statically: it's NULL, because irda doesn't define a disconnect
operation.

So calling that function is doubly wrong, and will just cause an oops.
Reported-by: Martin Lang <mlg.hessigheim@gmail.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During system suspend after connector switch off its dpms field
is set to connector previous dpms state. To properly resume dpms field
should be set to its actual state (off) before resuming to previous dpms state.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Before DPMS off driver disables vblank.
It should be balanced by vblank enable after DPMS on.
The patch fixes issue with page_flip ioctl not being able
to acquire vblank counter introduced by patch:
drm: Always reject drm_vblank_get() after drm_vblank_off()
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

HPD events can be generated by components even if drm_dev is not fully
initialized, to skip such events kms poll initialization should
be performed at the end of load callback followed directly by forced
connection detection.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

In case of error during plane initialization load callback
incorrectly return success, this patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

encoder object isn't used anymore so remove it.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

All KMS objects are destroyed by drm_mode_config_cleanup in proper order
so component drivers should not care about it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Initialization of vblank with MAX_CRTC caused attempts
to disabling vblanks for non-existing crtcs in case
drm used fewer crtcs. The patch fixes it.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Most call paths to vmx_vcpu_reset do not hold the SRCU lock.  Defer loading
the APIC access page to the next vmentry.

This avoids the following lockdep splat:

[ INFO: suspicious RCU usage. ]
3.18.0-rc2-test2+ #70 Not tainted
-------------------------------
include/linux/kvm_host.h:474 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by qemu-system-x86/2371:
 #0:  (&vcpu->mutex){+.+...}, at: [<ffffffffa037d800>] vcpu_load+0x20/0xd0 [kvm]

stack backtrace:
CPU: 4 PID: 2371 Comm: qemu-system-x86 Not tainted 3.18.0-rc2-test2+ #70
Hardware name: Dell Inc. OptiPlex 9010/0M9KCM, BIOS A12 01/10/2013
 0000000000000001 ffff880209983ca8 ffffffff816f514f 0000000000000000
 ffff8802099b8990 ffff880209983cd8 ffffffff810bd687 00000000000fee00
 ffff880208a2c000 ffff880208a10000 ffff88020ef50040 ffff880209983d08
Call Trace:
 [<ffffffff816f514f>] dump_stack+0x4e/0x71
 [<ffffffff810bd687>] lockdep_rcu_suspicious+0xe7/0x120
 [<ffffffffa037d055>] gfn_to_memslot+0xd5/0xe0 [kvm]
 [<ffffffffa03807d3>] __gfn_to_pfn+0x33/0x60 [kvm]
 [<ffffffffa0380885>] gfn_to_page+0x25/0x90 [kvm]
 [<ffffffffa038aeec>] kvm_vcpu_reload_apic_access_page+0x3c/0x80 [kvm]
 [<ffffffffa08f0a9c>] vmx_vcpu_reset+0x20c/0x460 [kvm_intel]
 [<ffffffffa039ab8e>] kvm_vcpu_reset+0x15e/0x1b0 [kvm]
 [<ffffffffa039ac0c>] kvm_arch_vcpu_setup+0x2c/0x50 [kvm]
 [<ffffffffa037f7e0>] kvm_vm_ioctl+0x1d0/0x780 [kvm]
 [<ffffffff810bc664>] ? __lock_is_held+0x54/0x80
 [<ffffffff812231f0>] do_vfs_ioctl+0x300/0x520
 [<ffffffff8122ee45>] ? __fget+0x5/0x250
 [<ffffffff8122f0fa>] ? __fget_light+0x2a/0xe0
 [<ffffffff81223491>] SyS_ioctl+0x81/0xa0
 [<ffffffff816fed6d>] system_call_fastpath+0x16/0x1b
Reported-by: Takashi Iwai <tiwai@suse.de>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Tested-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Fixes: 38b99173Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

In order to access the shadow VMCS, we need to load it. At this point,
vmx->loaded_vmcs->vmcs and the actually loaded one start to differ. If
we now get preempted by Linux, vmx_vcpu_put and, on return, the
vmx_vcpu_load will work against the wrong vmcs. That can cause
copy_shadow_to_vmcs12 to corrupt the vmcs12 state.

Fix the issue by disabling preemption during the copy operation.
copy_vmcs12_to_shadow is safe from this issue as it is executed by
vmx_vcpu_run when preemption is already disabled before vmentry.

This bug is exposed by running Jailhouse within KVM on CPUs with
shadow VMCS support.  Jailhouse never expects an interrupt pending
vmexit, but the bug can cause it if, after copy_shadow_to_vmcs12
is preempted, the active VMCS happens to have the virtual interrupt
pending flag set in the CPU-based execution controls.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit d1442d85 ("KVM: x86: Handle errors when RIP is set during far
jumps") introduced a bug that caused the fix to be incomplete.  Due to
incorrect evaluation, far jump to segment with L bit cleared (i.e., 32-bit
segment) and RIP with any of the high bits set (i.e, RIP[63:32] != 0) set may
not trigger #GP.  As we know, this imposes a security problem.

In addition, the condition for two warnings was incorrect.

Fixes: d1442d85Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
[Add #ifdef CONFIG_X86_64 to avoid complaints of undefined behavior. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

A critical 3.18 regression fix from Rob, (thanks!)
A fix to avoid advertizing modes we can't support from Sinclair
  (welcome Sinclair!)
and a fix for an incorrect  hash key computation from me that is
  completely harmless, but can wait 'til the next merge window if necessary.
  (I can't really bother stable with this one).

* 'vmwgfx-fixes-3.18' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Filter out modes those cannot be supported by the current VRAM size.
  drm/vmwgfx: Fix hash key computation
  drm/vmwgfx: fix lock breakage

Pull staging fixes from Greg KH:
 "Here are some staging driver fixes for 3.18-rc3.  Mostly iio and
  comedi driver fixes for issues reported by people.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: fix memory leak / bad pointer freeing for chanlist
  staging: comedi: Kconfig: fix config COMEDI_ADDI_APCI_3120 dependants
  staging: comedi: widen subdevice number argument in ioctl handlers
  staging: rtl8723au: Fix alignment of mac_addr for ether_addr_copy() usage
  drivers/staging/comedi/Kconfig: Let COMEDI_II_PCI20KC depend on HAS_IOMEM
  staging: comedi: (regression) channel list must be set for COMEDI_CMD ioctl
  iio: adc: mxs-lradc: Disable the clock on probe failure
  iio: st_sensors: Fix buffer copy
  staging:iio:ad5933: Drop "raw" from channel names
  staging:iio:ad5933: Fix NULL pointer deref when enabling buffer

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 3.18-rc3.

  Mostly usb-serial device ids and gadget fixes for issues that have
  been reported.  Full details are in the shortlog.

  All of these have been in linux-next for a while"

* tag 'usb-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits)
  usb: chipidea: Fix oops when removing the ci_hdrc module
  usb: gadget: function: Fixed the return value on error path
  usb: dwc2: gadget: disable phy before turning off power regulators
  usb: gadget: function: Remove redundant usb_free_all_descriptors
  usb: dwc3: gadget: Properly initialize LINK TRB
  usb: dwc2: gadget: fix gadget unregistration in udc_stop() function
  usb: dwc2: Bits in bitfield should add up to 32
  usb: dwc2: gadget: sparse warning of context imbalance
  usb: gadget: udc: core: fix kernel oops with soft-connect
  usb: musb: musb_dsps: fix NULL pointer in suspend
  usb: musb: dsps: start OTG timer on resume again
  usb: gadget: loopback: don't queue requests to bogus endpoints
  usb: ffs: fix regression when quirk_ep_out_aligned_size flag is set
  usb: gadget: f_fs: remove redundant ffs_data_get()
  usb: gadget: udc: USB_GADGET_XILINX should depend on HAS_DMA
  Revert "usb: dwc3: dwc3-omap: Disable/Enable only wrapper interrupts in prepare/complete"
  usb: gadget: composite: enable BESL support
  usb: musb: cppi41: restart hrtimer only if not yet done
  usb: dwc3: ep0: fix Data Phase for transfer sizes aligned to wMaxPacketSize
  usb: serial: ftdi_sio: add "bricked" FTDI device PID
  ...