- 19 Nov, 2019 3 commits
-
-
Thomas Zimmermann authored
There are no callers of drm_fb_helper_unlink_fbi() left. Remove the function. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
The udl driver can use the generic fbdev implementation. Convert it. v5: * initialize console after registering device v4: * hardcode console bpp to 16 v3: * remove module parameter fb_bpp in favor of fbdev's video * call drm_fbdev_generic_setup() directly; remove udl_fbdev_init() * use default for struct drm_mode_config_funcs.output_poll_changed * use default for struct drm_driver.lastclose Signed-off-by:
-
komeda/komeda_event.c: In function ‘komeda_sprintf’: komeda/komeda_event.c:31:2: warning: function ‘komeda_sprintf’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format] num = vsnprintf(str->str + str->len, free_sz, fmt, args); v2: Update the comment msg. Reviewed-by:
Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by:
james qian wang (Arm Technology China) <james.qian.wang@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114100421.30510-1-james.qian.wang@arm.com
-
- 18 Nov, 2019 2 commits
-
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/gma500/cdv_intel_dp.c: In function cdv_intel_dp_complete_link_train: drivers/gpu/drm/gma500/cdv_intel_dp.c:1596:7: warning: variable channel_eq set but not used [-Wunused-but-set-variable] It is never used, so remove it. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1573902268-117518-1-git-send-email-zhengbin13@huawei.com
-
Manasi Navare authored
In case of tiled displays, if we hotplug just one connector, fbcon currently just selects the preferred mode and if it is tiled mode then that becomes a problem if rest of the tiles are not present. So in the fbdev driver on hotplug when we probe the client modeset, if we dont find all the connectors for all tiles, then on a connector with one tile, just fallback to the first available non tiled mode to display over a single connector. On the hotplug of the consecutive tiled connectors, if the tiled mode no longer exists because of fbcon size limitation, then return no modes for consecutive tiles but retain the non tiled mode on the 0th tile. Use the same logic in case of connected boot case as well. This has been tested with Dell UP328K tiled monitor. v2: * Set the modes on consecutive hotplugged tiles to no mode if tiled mode is pruned (Dave) v1: * Just handle the 1st connector hotplug case * v1 Reviewed-by: Dave Airlie <airlied@redhat.com> Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
Dave Airlie <airlied@redhat.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
- 15 Nov, 2019 4 commits
-
-
Jean Delvare authored
It is fine for displays without audio functionality to not implement CEA v3 extension in their EDID. Do not return an error in that case, instead return 0 as if there was a CEA v3 extension with no audio or speaker block. This fixes the second half of bug fdo#107825: https://bugs.freedesktop.org/show_bug.cgi?id=107825Signed-off-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set: drivers/gpu/drm/gma500/cdv_intel_display.c:594:7: warning: variable is_hdmi set but not used [-Wunused-but-set-variable] drivers/gpu/drm/gma500/cdv_intel_display.c: In function cdv_intel_crtc_mode_set: drivers/gpu/drm/gma500/cdv_intel_display.c:593:7: warning: variable is_crt set but not used [-Wunused-but-set-variable] They are not used since commit acd7ef92 ("gma500: Update the Cedarview clock handling") Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/gma500/psb_irq.c: In function psb_sgx_interrupt: drivers/gpu/drm/gma500/psb_irq.c:210:6: warning: variable error set but not used [-Wunused-but-set-variable] It is introduced by commit 64a4aff2 ("drm/gma500: Add support for SGX interrupts"), but never used, so remove it. Reported-by:
-
zhengbin authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/gma500/oaktrail_hdmi.c: In function htotal_calculate: drivers/gpu/drm/gma500/oaktrail_hdmi.c:160:6: warning: variable htotal set but not used [-Wunused-but-set-variable] It is introduced by commit 39ec748f ("gma600: Enable HDMI support"), but never used, so remove it. Reported-by:
-
- 14 Nov, 2019 14 commits
-
-
Linus Walleij authored
This adds device tree bindings for the Sony ACX424AKP panel. Let's use YAML. Cc: devicetree@vger.kernel.org Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191114131525.3988-1-linus.walleij@linaro.org
-
Thomas Zimmermann authored
Both callbacks are deprecated. Remove them and call functions explicitly. Signed-off-by:
-
Thomas Zimmermann authored
Both functions are deprecated. Open-code them them in preparation of removing struct drm_driver.{load,unload}. Signed-off-by: -
Jani Nikula authored
In preparation for adding struct drm_device based logging, group the existing functions by prink or struct device based logging. No functional changes. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/51c70d80e7dd06c49ba3be56fbb6ae70edddc102.1572258936.git.jani.nikula@intel.com
-
Jani Nikula authored
Mostly for improved documentation, convert the debug category macros into an enum. Drop unused DRM_UT_NONE. Document previously undocumented categories. Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by:
-
Jani Nikula authored
We don't want people calling the functions directly. No functional changes. Reviewed-by:
-
Jani Nikula authored
drm_debug_enabled() is the way to check. __drm_debug is now reserved for drm print code only. No functional changes. v2: Rebase on move unlikely() to drm_debug_enabled() Acked-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Eric Engestrom <eric@engestrom.ch> Acked-by:
-
Jani Nikula authored
Allow better abstraction of the drm_debug global variable in the future. No functional changes. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David (ChunMing) Zhou <David1.Zhou@amd.com> Cc: amd-gfx@lists.freedesktop.org Acked-by:
-
Jani Nikula authored
Allow better abstraction of the drm_debug global variable in the future. No functional changes. v2: move unlikely() to drm_debug_enabled() Cc: Ben Skeggs <bskeggs@redhat.com> Cc: nouveau@lists.freedesktop.org Acked-by:
-
Jani Nikula authored
Allow better abstraction of the drm_debug global variable in the future. No functional changes. Reviewed-by:
-
Lowry Li (Arm Technology China) authored
Adds gamma and color-transform support for DOU-IPS. Adds two caps members fgamma_coeffs and ctm_coeffs to komeda_improc_state. If color management changed, set gamma and color-transform accordingly. v5: Rebase with drm-misc-next Signed-off-by:
Lowry Li (Arm Technology China) <lowry.li@arm.com> Signed-off-by:
-
This function is for converting drm_color_ctm matrix to komeda hardware required required Q2.12 2's complement CSC matrix. v2: Move the fixpoint conversion function s31_32_to_q2_12() to drm core as a shared helper. Signed-off-by:
-
This function is used to convert drm color lut to komeda HW required curve coeffs values. Signed-off-by:
-
Add a new helper function drm_color_ctm_s31_32_to_qm_n() for driver to convert S31.32 sign-magnitude to Qm.n 2's complement that supported by hardware. V4: Address Mihai, Daniel and Ilia's review comments. V5: Includes the sign bit in the value of m (Qm.n). V6: Allows m = 0 according to Mihail's comments. V7: Address Mihail's comments. V8: Use type 'u32' to replace 'uint32_t' V9: Rebase. Signed-off-by:
-
- 13 Nov, 2019 3 commits
-
-
Daniel Vetter authored
Not sure we don't yet have this as a patch somewhere ... Motivation is that the automatic lifetime management of the generic fbdev code is quite tricky, and it'll get even more tricky. Allowing drivers to just use the fb_probe looks like a recipe for disaster. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Maxime Ripard authored
The driver assumes that the platform uses the device tree, and thus relies on some fields (of_node) being declared in some structures (drm_bridge). This isn't true for all platforms, so make sure we can only compile the ANX6345 on platforms where DT support is selected. Cc: Torsten Duwe <duwe@lst.de> Fixes: 6aa19269 ("drm/bridge: Add Analogix anx6345 support") Acked-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20191112204551.541449-1-maxime@cerno.tech
-
Fix the build errors lead by 'commit 4039f029 ("drm/komeda: Add option to print WARN- and INFO-level IRQ events")' Signed-off-by:
-
- 12 Nov, 2019 7 commits
-
-
Torsten Duwe authored
The anx6345 driver originally was copied from anx78xx.c, which has meanwhile seen a few changes. In particular, the removal of drm_dp_link helpers and the discontinuation to include drm_bridge.h from drm_crtc.h breaks compilation in linux-5.5. Apply equivalents of these changes to anx6345.c. Fixes: 6aa19269 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by:
Torsten Duwe <duwe@suse.de> Signed-off-by:
-
Chuhong Yuan authored
drm_put_dev also calls drm_dev_unregister, so dev will be unregistered twice. Replace it with drm_dev_put to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Mihail Atanassov authored
It's possible to get multiple events in a single frame/flip, so add an option to print them all. Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Mihail Atanassov authored
Extra detail (normally off) almost never hurts. Reviewed-by:
-
Mihail Atanassov authored
It's potentially useful information when diagnosing error/warn IRQs, so dump it to dmesg with a drm_info_printer. Hide this extra debug dumping behind another komeda_dev->err_verbosity bit. Note that there's not much sense in dumping it for INFO events, since the VSYNC event will swamp the log. Reviewed-by:
-
Mihail Atanassov authored
Now that there's a debugfs node to control the same, remove the config option. Reviewed-by:
-
Mihail Atanassov authored
Named 'err_verbosity', currently with only 1 active bit in that replicates the existing level - print error events once per flip. Reviewed-by:
-
- 09 Nov, 2019 7 commits
-
-
Stephan Gerhold authored
Disabling the display using MCDE currently results in a warning together with a delay caused by some timeouts: mcde a0350000.mcde: MCDE display is disabled ------------[ cut here ]------------ WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4 Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support) Workqueue: events drm_mode_rmfb_work_fn [<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14) [<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98) [<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4) [<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4) [<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4) [<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c) [<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c) [<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128) [<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428) [<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48) [<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c) [<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c) [<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150) [<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xeb14dfb0 to 0xeb14dff8) dfa0: 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 314909bcd4c7d50c ]--- [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out The reason for this is that there is a vblank event pending, but we never handle it after disabling the vblank interrupts. Check if there is an vblank event pending when disabling the display, and clear it by sending a fake vblank event in that case. Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Tested-by:
-
Stephan Gerhold authored
The DSI initialization sequence incorrectly assumes that the mode_set() function of the DRM bridge is always called when (re-)enabling the display. This is not necessarily the case. Keeping the device idle in the framebuffer console for a while results in the display being turned off using the disable() function. However, as soon as any key is pressed only (pre_)enable() are called. mode_set() is skipped because the mode has not been changed. In this case, the DSI HS/LP clocks are never turned back on, preventing the display from working. Fix this by moving a part of the initialization sequence from mode_set() to pre_enable(). Keep most of the video mode setup in mode_set() since most of the registers are only dependent on the mode that is set for the panel - there is no need to write them again each time we re-enable the display. Signed-off-by:
-
Stephan Gerhold authored
Using a (single) DSI display with MCDE currently results in two "connected" connectors: Connector: DSI-1 id : 34 encoder id : 0 conn : connected size : 0x0 (mm) count_modes : 0 count_props : 5 props : 1 2 5 6 4 count_encoders : 1 encoders : 33 Connector: DSI-2 id : 35 encoder id : 33 conn : connected size : 53x89 (mm) count_modes : 1 count_props : 5 props : 1 2 5 6 4 count_encoders : 1 encoders : 33 Mode: "480x800" 480x800 60 Although both show up as connected, the first one does not have any size and no available modes. This confuses userspace tools (e.g. kmscube) who look for available modes for the first connector. The reason for the duplicated connector is that mcde_dsi.c and the DRM panel bridge helper both set up a DSI connector, with more or less the same code. The connector set up by the DRM panel bridge is the one that is correctly set up in the example above. Therefore we can just remove the connector setup from mcde_dsi.c and let the DRM core handle all the hard work. Signed-off-by: -
Stephan Gerhold authored
The initialization order for DSI video mode is important - if we enable the video stream generator (VSG) before the MCDE DSI formatter starts sending pixel data, it will immediately run into an error and disable itself again. Avoid this problem by delaying the activation of the VSG until the MCDE DSI formatter is properly set up and running (i.e. when mcde_dsi_bridge_enable() is called). Signed-off-by:
-
Stephan Gerhold authored
Triggering an error conditions in DSI video mode only results in a very generic "some video mode error status" error message at the moment. Make this more clear by adding separate error messages for each bit. Signed-off-by:
-
Stephan Gerhold authored
The MCDE driver differentiates only between "te_sync" (for hardware TE0 sync) and software sync (i.e. manually triggered updates) at the moment. However, none of these options work correctly for video mode panels. Therefore, we need to make some changes to make them work correctly: - Select hardware sync coming from the (DSI) formatter. - Keep the FIFO permanently enabled (otherwise MCDE will stop feeding data to the panel). - Skip manual software sync (this is not necessary in video mode). Automatically detect if the connected panel is using video mode and enable the necessary changes in that case. Signed-off-by: -
Stephan Gerhold authored
At the moment, vblank handling is only enabled together with TE synchronization. However, the vblank IRQ is also working with on displays without TE synchronization (e.g. DSI video mode panels). It seems like the vblank IRQ is actually generated by the MCDE hardware for the channel. Therefore, the vblank handling should be working correctly in all the cases and we can enable it unconditionally. Signed-off-by:
-
