Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, bpf and wireguard.

  Current release - regressions:

   - nvme-tcp: fix comma-related oops after sendpage changes

  Current release - new code bugs:

   - ptp: make max_phase_adjustment sysfs device attribute invisible
     when not supported

  Previous releases - regressions:

   - sctp: fix potential deadlock on &net->sctp.addr_wq_lock

   - mptcp:
      - ensure subflow is unhashed before cleaning the backlog
      - do not rely on implicit state check in mptcp_listen()

  Previous releases - always broken:

   - net: fix net_dev_start_xmit trace event vs skb_transport_offset()

   - Bluetooth:
      - fix use-bdaddr-property quirk
      - L2CAP: fix multiple UaFs
      - ISO: use hci_sync for setting CIG parameters
      - hci_event: fix Set CIG Parameters error status handling
      - hci_event: fix parsing of CIS Established Event
      - MGMT: fix marking SCAN_RSP as not connectable

   - wireguard: queuing: use saner cpu selection wrapping

   - sched: act_ipt: various bug fixes for iptables <> TC interactions

   - sched: act_pedit: add size check for TCA_PEDIT_PARMS_EX

   - dsa: fixes for receiving PTP packets with 8021q and sja1105 tagging

   - eth: sfc: fix null-deref in devlink port without MAE access

   - eth: ibmvnic: do not reset dql stats on NON_FATAL err

  Misc:

   - xsk: honor SO_BINDTODEVICE on bind"

* tag 'net-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
  nfp: clean mc addresses in application firmware when closing port
  selftests: mptcp: pm_nl_ctl: fix 32-bit support
  selftests: mptcp: depend on SYN_COOKIES
  selftests: mptcp: userspace_pm: report errors with 'remove' tests
  selftests: mptcp: userspace_pm: use correct server port
  selftests: mptcp: sockopt: return error if wrong mark
  selftests: mptcp: sockopt: use 'iptables-legacy' if available
  selftests: mptcp: connect: fail if nft supposed to work
  mptcp: do not rely on implicit state check in mptcp_listen()
  mptcp: ensure subflow is unhashed before cleaning the backlog
  s390/qeth: Fix vipa deletion
  octeontx-af: fix hardware timestamp configuration
  net: dsa: sja1105: always enable the send_meta options
  net: dsa: tag_sja1105: fix MAC DA patching from meta frames
  net: Replace strlcpy with strscpy
  pptp: Fix fib lookup calls.
  mlxsw: spectrum_router: Fix an IS_ERR() vs NULL check
  net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
  xsk: Honor SO_BINDTODEVICE on bind
  ptp: Make max_phase_adjustment sysfs device attribute invisible when not supported
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this cycle, we've mainly investigated the zoned block device
  support along with patches such as correcting write pointers between
  f2fs and storage, adding asynchronous zone reset flow, and managing
  the number of open zones.

  Other than them, f2fs adds another mount option, "errors=x" to specify
  how to handle when it detects an unexpected behavior at runtime.

  Enhancements:
   - support 'errors=remount-ro|continue|panic' mount option
   - enforce some inode flag policies
   - allow .tmp compression given extensions
   - add some ioctls to manage the f2fs compression
   - improve looped node chain flow
   - avoid issuing small-sized discard commands during checkpoint
   - implement an asynchronous zone reset

  Bug fixes:
   - fix deadlock in xattr and inode page lock
   - fix and add sanity check in some error paths
   - fix to avoid NULL pointer dereference f2fs_write_end_io() along
     with put_super
   - set proper flags to quota files
   - fix potential deadlock due to unpaired node_write lock use
   - fix over-estimating free section during FG GC
   - fix the wrong condition to determine atomic context

  As usual, also there are a number of patches with code refactoring and
  minor clean-ups"

* tag 'f2fs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (46 commits)
  f2fs: fix to do sanity check on direct node in truncate_dnode()
  f2fs: only set release for file that has compressed data
  f2fs: fix compile warning in f2fs_destroy_node_manager()
  f2fs: fix error path handling in truncate_dnode()
  f2fs: fix deadlock in i_xattr_sem and inode page lock
  f2fs: remove unneeded page uptodate check/set
  f2fs: update mtime and ctime in move file range method
  f2fs: compress tmp files given extension
  f2fs: refactor struct f2fs_attr macro
  f2fs: convert to use sbi directly
  f2fs: remove redundant assignment to variable err
  f2fs: do not issue small discard commands during checkpoint
  f2fs: check zone write pointer points to the end of zone
  f2fs: add f2fs_ioc_get_compress_blocks
  f2fs: cleanup MIN_INLINE_XATTR_SIZE
  f2fs: add helper to check compression level
  f2fs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  f2fs: do more sanity check on inode
  f2fs: compress: fix to check validity of i_compress_flag field
  f2fs: add sanity compress level check for compressed file
  ...

Pull more xfs updates from Darrick Wong:

 - Fix some ordering problems with log items during log recovery

 - Don't deadlock the system by trying to flush busy freed extents while
   holding on to busy freed extents

 - Improve validation of log geometry parameters when reading the
   primary superblock

 - Validate the length field in the AGF header

 - Fix recordset filtering bugs when re-calling GETFSMAP to return more
   results when the resultset didn't previously fit in the caller's
   buffer

 - Fix integer overflows in GETFSMAP when working with rt volumes larger
   than 2^32 fsblocks

 - Fix GETFSMAP reporting the undefined space beyond the last rtextent

 - Fix filtering bugs in GETFSMAP's log device backend if the log ever
   becomes longer than 2^32 fsblocks

 - Improve validation of file offsets in the GETFSMAP range parameters

 - Fix an off by one bug in the pmem media failure notification
   computation

 - Validate the length field in the AGI header too

* tag 'xfs-6.5-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Remove unneeded semicolon
  xfs: AGI length should be bounds checked
  xfs: fix the calculation for "end" and "length"
  xfs: fix xfs_btree_query_range callers to initialize btree rec fully
  xfs: validate fsmap offsets specified in the query keys
  xfs: fix logdev fsmap query result filtering
  xfs: clean up the rtbitmap fsmap backend
  xfs: fix getfsmap reporting past the last rt extent
  xfs: fix integer overflows in the fsmap rtbitmap and logdev backends
  xfs: fix interval filtering in multi-step fsmap queries
  xfs: fix bounds check in xfs_defer_agfl_block()
  xfs: AGF length has never been bounds checked
  xfs: journal geometry is not properly bounds checked
  xfs: don't block in busy flushing when freeing extents
  xfs: allow extent free intents to be retried
  xfs: pass alloc flags through to xfs_extent_busy_flush()
  xfs: use deferred frees for btree block freeing
  xfs: don't reverse order of items in bulk AIL insertion
  xfs: remove redundant initializations of pointers drop_leaf and save_leaf

Merge tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "There's a little bit of everything in here: we've got various
  improvements and cleanups to drivers, some fixes across the board and
  a bit of new hardware support"

* tag 'pwm/for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (22 commits)
  dt-bindings: pwm: convert pwm-bcm2835 bindings to YAML
  pwm: Add Renesas RZ/G2L MTU3a PWM driver
  pwm: mtk_disp: Fix the disable flow of disp_pwm
  dt-bindings: pwm: restrict node name suffixes
  pwm: pca9685: Switch i2c driver back to use .probe()
  pwm: ab8500: Fix error code in probe()
  MAINTAINERS: add pwm to PolarFire SoC entry
  pwm: add microchip soft ip corePWM driver
  pwm: sysfs: Do not apply state to already disabled PWMs
  pwm: imx-tpm: force 'real_period' to be zero in suspend
  pwm: meson: make full use of common clock framework
  pwm: meson: don't use hdmi/video clock as mux parent
  pwm: meson: switch to using struct clk_parent_data for mux parents
  pwm: meson: remove not needed check in meson_pwm_calc
  pwm: meson: fix handling of period/duty if greater than UINT_MAX
  pwm: meson: modify and simplify calculation in meson_pwm_get_state
  dt-bindings: pwm: Add R-Car V3U device tree bindings
  dt-bindings: pwm: imx: add i.MX8QXP compatible
  pwm: mediatek: Add support for MT7981
  dt-bindings: pwm: mediatek: Add mediatek,mt7981 compatible
  ...

Pull more devicetree updates from Rob Herring:

 - Whitespace clean-ups in binding examples

 - Restrict node name suffixes to "-[0-9]+" for cases of multiple
   instances which don't have unit-addresses

 - Convert brcm,kona-wdt and cdns,wdt-r1p2 watchdog bindings to DT
   schema

* tag 'devicetree-for-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: soc: qcom: stats: Update maintainer email
  dt-bindings: cleanup DTS example whitespaces
  dt-bindings: timestamp: restrict node name suffixes
  dt-bindings: slimbus: restrict node name suffixes
  dt-bindings: watchdog: restrict node name suffixes
  dt-bindings: watchdog: brcm,kona-wdt: convert txt file to yaml
  dt-bindings: watchdog: cdns,wdt-r1p2: Convert cadence watchdog to yaml

When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.

Now use `__dev_mc_unsync` to clean mc addresses when closing port.

Fixes: e20aa071 ("nfp: fix schedule in atomic context when sync mc address")
Cc: stable@vger.kernel.org
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Message-ID: <20230705052818.7122-1-louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-07-05

We've added 2 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 16 insertions(+), 4 deletions(-).

The main changes are:

1) Fix BTF to warn but not returning an error for a NULL BTF to still be
   able to load modules under CONFIG_DEBUG_INFO_BTF, from SeongJae Park.

2) Fix xsk sockets to honor SO_BINDTODEVICE in bind(), from Ilya Maximets.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xsk: Honor SO_BINDTODEVICE on bind
  bpf, btf: Warn but return no error for NULL btf from __register_btf_kfunc_id_set()
====================

Link: https://lore.kernel.org/r/20230705171716.6494-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull soundwire updates from Vinod Koul:

 - Stream handling and slave alert handling

 - Qualcomm Soundwire v2.0.0 controller support

 - Intel ACE2.x initial support and code reorganization

* tag 'soundwire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (55 commits)
  soundwire: stream: Make master_list ordered to prevent deadlocks
  soundwire: bus: Prevent lockdep asserts when stream has multiple buses
  soundwire: qcom: fix storing port config out-of-bounds
  soundwire: intel_ace2x: fix SND_SOC_SOF_HDA_MLINK dependency
  soundwire: debugfs: Add missing SCP registers
  soundwire: stream: Remove unnecessary gotos
  soundwire: stream: Invert logic on runtime alloc flags
  soundwire: stream: Remove unneeded checks for NULL bus
  soundwire: bandwidth allocation: Remove pointless variable
  soundwire: cadence: revisit parity injection
  soundwire: intel/cadence: update hardware reset sequence
  soundwire: intel_bus_common: enable interrupts last
  soundwire: intel_bus_common: update error log
  soundwire: amd: Improve error message in remove callback
  soundwire: debugfs: fix unbalanced pm_runtime_put()
  soundwire: qcom: fix unbalanced pm_runtime_put()
  soundwire: qcom: set clk stop need reset flag at runtime
  soundwire: qcom: add software workaround for bus clash interrupt assertion
  soundwire: qcom: wait for fifo to be empty before suspend
  soundwire: qcom: drop unused struct qcom_swrm_ctrl members
  ...

Pull media updates from Mauro Carvalho Chehab:

 - Lots of improvement at atomisp driver, which is starting to look in
   good shape

 - Mediatek vcodec driver has gained support for av1 and hevc stateless
   codecs

 - New sensor driver: ov01a10

 - verisilicon driver has gained AV1 entropy helpers

 - tegra-video has gained support for Tegra20 parallel input

 - dvb core has gained an extra property to better support DVB-S2X

 - as usual, lots of cleanups, fixes and improvements on media drivers

* tag 'media/v6.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (253 commits)
  media: wl128x: fix a clang warning
  media: dvb: mb86a20s: get rid of a clang-15 warning
  media: cec: i2c: ch7322: also select REGMAP
  media: add HAS_IOPORT dependencies
  media: tc358746: select CONFIG_GENERIC_PHY
  media: mediatek: vcodec: Add dbgfs help function
  media: mediatek: vcodec: Add encode to support dbgfs
  media: mediatek: vcodec: Change dbgfs interface to support encode
  media: mediatek: vcodec: Get each instance format type
  media: mediatek: vcodec: Get each context resolution information
  media: mediatek: vcodec: Add a debugfs file to get different useful information
  media: mediatek: vcodec: Add debug params to control different log level
  media: mediatek: vcodec: Add debugfs interface to get debug information
  media: mediatek: vcodec: support stateless AV1 decoder
  media: verisilicon: Conditionally ignore native formats
  media: verisilicon: Enable AV1 decoder on rk3588
  media: verisilicon: Add film grain feature to AV1 driver
  media: verisilicon: Add Rockchip AV1 decoder
  media: verisilicon: Add AV1 entropy helpers
  media: verisilicon: Compute motion vectors size for AV1 frames
  ...

Pull tracing tooling updates from Steven Rostedt:

 - Add cgroup support for rtla via the -C option

 - Add --house-keeping option that tells rtla where to place the
   housekeeping threads

 - Have rtla/timerlat have its own tracing instance instead of using the
   top level tracing instance that is the default for other tracing
   users to use

 - Add auto analysis to timerlat_hist

 - Have rtla start the tracers after creating the instances

 - Reduce rtla hwnoise down to 75% from 100% as it runs with preemption
   disabled and can cause system instability at 100%

 - Add support to run timerlat_top and timerlat_hist threads in
   user-space instead of just using the kernel tasks

 - Some minor clean ups and documentation changes

* tag 'trace-tools-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation: Add tools/rtla timerlat -u option documentation
  rtla/timerlat_hist: Add timerlat user-space support
  rtla/timerlat_top: Add timerlat user-space support
  rtla/hwnoise: Reduce runtime to 75%
  rtla: Start the tracers after creating all instances
  rtla/timerlat_hist: Add auto-analysis support
  rtla/timerlat: Give timerlat auto analysis its own instance
  rtla: Automatically move rtla to a house-keeping cpu
  rtla: Change monitored_cpus from char * to cpu_set_t
  rtla: Add --house-keeping option
  rtla: Add -C cgroup support

Merge tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux

Pull more parisc architecture updates from Helge Deller:

 -  Fix all compiler warnings in arch/parisc and drivers/parisc when
    compiled with W=1

* tag 'parisc-for-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: syscalls: Avoid compiler warnings with W=1
  parisc: math-emu: Avoid compiler warnings with W=1
  parisc: Raise minimal GCC version to 12.0.0
  parisc: unwind: Avoid missing prototype warning for handle_interruption()
  parisc: smp: Add declaration for start_cpu_itimer()
  parisc: pdt: Get prototype for arch_report_meminfo()

I added a warning about about GUP no longer expanding the stack in
commit a425ac53 ("gup: add warning if some caller would seem to want
stack expansion"), but didn't really expect anybody to hit it.

And it's true that nobody seems to have hit a _real_ case yet, but we
certainly have a number of reports of false positives.  Which not only
causes extra noise in itself, but might also end up hiding any real
cases if they do exist.

So let's tighten up the warning condition, and replace the simplistic

	vma = find_vma(mm, start);
	if (vma && (start < vma->vm_start)) {
		WARN_ON_ONCE(vma->vm_flags & VM_GROWSDOWN);

with a

	vma = gup_vma_lookup(mm, start);

helper function which works otherwise like just "vma_lookup()", but with
some heuristics for when to warn about gup no longer causing stack
expansion.

In particular, don't just warn for "below the stack", but warn if it's
_just_ below the stack (with "just below" arbitrarily defined as 64kB,
because why not?).  And rate-limit it to at most once per hour, which
means that any false positives shouldn't completely hide subsequent
reports, but we won't be flooding the logs about it either.

The previous code triggered when some GUP user (chromium crashpad)
accessing past the end of the previous vma, for example.  That has never
expanded the stack, it just causes GUP to return early, and as such we
shouldn't be warning about it.

This is still going trigger the randomized testers, but to mitigate the
noise from that, use "dump_stack()" instead of "WARN_ON_ONCE()" to get
the kernel call chain.  We'll get the relevant information, but syzbot
shouldn't get too upset about it.

Also, don't even bother with the GROWSUP case, which would be using
different heuristics entirely, but only happens on parisc.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: John Hubbard <jhubbard@nvidia.com>
Reported-by: syzbot+6cf44e127903fdf9d929@syzkaller.appspotmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace my email.

Cc: devicetree@vger.kernel.org
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230703092026.4923-1-quic_mkshah@quicinc.comSigned-off-by: Rob Herring <robh@kernel.org>

The DTS code coding style expects spaces around '=' sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20230702182308.7583-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Rob Herring <robh@kernel.org>

Matthieu Baerts says:

====================
mptcp: fixes for v6.5

Here is a first batch of fixes for v6.5 and older.

The fixes are not linked to each others.

Patch 1 ensures subflows are unhashed before cleaning the backlog to
avoid races. This fixes another recent fix from v6.4.

Patch 2 does not rely on implicit state check in mptcp_listen() to avoid
races when receiving an MP_FASTCLOSE. A regression from v5.17.

The rest fixes issues in the selftests.

Patch 3 makes sure errors when setting up the environment are no longer
ignored. For v5.17+.

Patch 4 uses 'iptables-legacy' if available to be able to run on older
kernels. A fix for v5.13 and newer.

Patch 5 catches errors when issues are detected with packet marks. Also
for v5.13+.

Patch 6 uses the correct variable instead of an undefined one. Even if
there was no visible impact, it can help to find regressions later. An
issue visible in v5.19+.

Patch 7 makes sure errors with some sub-tests are reported to have the
selftest marked as failed as expected. Also for v5.19+.

Patch 8 adds a kernel config that is required to execute MPTCP
selftests. It is valid for v5.9+.

Patch 9 fixes issues when validating the userspace path-manager with
32-bit arch, an issue affecting v5.19+.
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>

When using pm_nl_ctl to validate userspace path-manager's behaviours, it
was failing on 32-bit architectures ~half of the time.

pm_nl_ctl was not reporting any error but the command was not doing what
it was expected to do. As a result, the expected linked event was not
triggered after and the test failed.

This is due to the fact the token given in argument to the application
was parsed as an integer with atoi(): in a 32-bit arch, if the number
was bigger than INT_MAX, 2147483647 was used instead.

This can simply be fixed by using strtoul() instead of atoi().

The errors have been seen "by chance" when manually looking at the
results from LKFT.

Fixes: 9a0b3650 ("selftests: mptcp: support MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Fixes: ecd2a77d ("selftests: mptcp: support MPTCP_PM_CMD_REMOVE")
Fixes: cf8d0a6d ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_CREATE")
Fixes: 57cc361b ("selftests: mptcp: support MPTCP_PM_CMD_SUBFLOW_DESTROY")
Fixes: ca188a25 ("selftests: mptcp: userspace PM support for MP_PRIO signals")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

MPTCP selftests are using TCP SYN Cookies for quite a while now, since
v5.9.

Some CIs don't have this config option enabled and this is causing
issues in the tests:

  # ns1 MPTCP -> ns1 (10.0.1.1:10000      ) MPTCP     (duration   167ms) sysctl: cannot stat /proc/sys/net/ipv4/tcp_syncookies: No such file or directory
  # [ OK ]./mptcp_connect.sh: line 554: [: -eq: unary operator expected

There is no impact in the results but the test is not doing what it is
supposed to do.

Fixes: fed61c4b ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

A message was mentioning an issue with the "remove" tests but the
selftest was not marked as failed.

Directly exit with an error like it is done everywhere else in this
selftest.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834f ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

"server4_port" variable is not set but "app4_port" is the server port in
v4 and the correct variable name to use.

The port is optional so there was no visible impact.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ca188a25 ("selftests: mptcp: userspace PM support for MP_PRIO signals")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an error was detected when checking the marks, a message was
correctly printed mentioning the error but followed by another one
saying everything was OK and the selftest was not marked as failed as
expected.

Now the 'ret' variable is directly set to 1 in order to make sure the
exit is done with an error, similar to what is done in other functions.
While at it, the error is correctly propagated to the caller.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPTables commands using 'iptables-nft' fail on old kernels, at least
on v5.15 because it doesn't see the default IPTables chains:

  $ iptables -L
  iptables/1.8.2 Failed to initialize nft: Protocol not supported

As a first step before switching to NFTables, we can use iptables-legacy
if available.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: dc65fe82 ("selftests: mptcp: add packet mark test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

In case of "external" errors when preparing the environment for the
TProxy tests, the subtests were marked as skipped.

This is fine but it means these errors are ignored. On MPTCP Public CI,
we do want to catch such issues and mark the selftest as failed if there
are such issues. We can then use mptcp_lib_fail_if_expected_feature()
helper that has been recently added to fail if needed.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9c ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since the blamed commit, closing the first subflow resets the first
subflow socket state to SS_UNCONNECTED.

The current mptcp listen implementation relies only on such
state to prevent touching not-fully-disconnected sockets.

Incoming mptcp fastclose (or paired endpoint removal) unconditionally
closes the first subflow.

All the above allows an incoming fastclose followed by a listen() call
to successfully race with a blocking recvmsg(), potentially causing the
latter to hit a divide by zero bug in cleanup_rbuf/__tcp_select_window().

Address the issue explicitly checking the msk socket state in
mptcp_listen(). An alternative solution would be moving the first
subflow socket state update into mptcp_disconnect(), but in the long
term the first subflow socket should be removed: better avoid relaying
on it for internal consistency check.

Fixes: b29fcfb5 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/414Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

While tacking care of the mptcp-level listener I unintentionally
moved the subflow level unhash after the subflow listener backlog
cleanup.

That could cause some nasty race and makes the code harder to read.

Address the issue restoring the proper order of operations.

Fixes: 57fc0f1c ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change boolean parameter of function "qeth_l3_vipa_store" inside the
"qeth_l3_dev_vipa_del4_store" function from "true" to "false" because
"true" is used for adding a virtual ip address and "false" for deleting.

Fixes: 2390166a ("s390/qeth: clean up L3 sysfs code")
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 534066a9.

It's actively detrimental in that it hides files that shouldn't be
hidden.

If I have some b4 mbx file in my git directory, it either was already
applied with "git am" and is now stale, or maybe it's waiting for that
to happen.  In neither case is "ignore it" the right option.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull scope-based resource management infrastructure from Peter Zijlstra:
 "These are the first few patches in the Scope-based Resource Management
  series that introduce the infrastructure but not any conversions as of
  yet.

  Adding the infrastructure now allows multiple people to start using
  them.

  Of note is that Sparse will need some work since it doesn't yet
  understand this attribute and might have decl-after-stmt issues"

* tag 'core_guards_for_6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peterz/queue:
  kbuild: Drop -Wdeclaration-after-statement
  locking: Introduce __cleanup() based infrastructure
  apparmor: Free up __cleanup() name
  dmaengine: ioat: Free up __cleanup() name

When an AFS FS.StoreData RPC call is made, amongst other things it is
given the resultant file size to be.  On the server, this is processed
by truncating the file to new size and then writing the data.

Now, kafs has a lock (vnode->io_lock) that serves to serialise
operations against a specific vnode (ie.  inode), but the parameters for
the op are set before the lock is taken.  This allows two writebacks
(say sync and kswapd) to race - and if writes are ongoing the writeback
for a later write could occur before the writeback for an earlier one if
the latter gets interrupted.

Note that afs_writepages() cannot take i_mutex and only takes a shared
lock on vnode->validate_lock.

Also note that the server does the truncation and the write inside a
lock, so there's no problem at that end.

Fix this by moving the calculation for the proposed new i_size inside
the vnode->io_lock.  Also reset the iterator (which we might have read
from) and update the mtime setting there.

Fixes: bd80d8a8 ("afs: Use ITER_XARRAY for writing")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/3526895.1687960024@warthog.procyon.org.uk/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAC block on CN10K (RPM) supports hardware timestamp configuration. The
previous patch which added timestamp configuration support has a bug.
Though the netdev driver requests to disable timestamp configuration,
the driver is always enabling it.

This patch fixes the same.

Fixes: d1489208 ("octeontx2-af: cn10k: RPM hardware timestamp configuration")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more overlayfs updates from Amir Goldstein:
 "This is a small 'move code around' followup by Christian to his work
  on porting overlayfs to the new mount api for 6.5. It makes things a
  bit cleaner and simpler for the next development cycle when I hand
  overlayfs back over to Miklos"

* tag 'ovl-update-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
  ovl: move all parameter handling into params.{c,h}

Pull gfs2 updates from Andreas Gruenbacher:

 - Move the freeze/thaw logic from glock callback context to process /
   worker thread context to prevent deadlocks

 - Fix a quota reference couting bug in do_qc()

 - Carry on deallocating inodes even when gfs2_rindex_update() fails

 - Retry filesystem-internal reads when they are interruped by a signal

 - Eliminate kmap_atomic() in favor of kmap_local_page() /
   memcpy_{from,to}_page()

 - Get rid of noop_direct_IO

 - And a few more minor fixes and cleanups

* tag 'gfs2-v6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (23 commits)
  gfs2: Add quota_change type
  gfs2: Use memcpy_{from,to}_page where appropriate
  gfs2: Convert remaining kmap_atomic calls to kmap_local_page
  gfs2: Replace deprecated kmap_atomic with kmap_local_page
  gfs: Get rid of unnucessary locking in inode_go_dump
  gfs2: gfs2_freeze_lock_shared cleanup
  gfs2: Replace sd_freeze_state with SDF_FROZEN flag
  gfs2: Rework freeze / thaw logic
  gfs2: Rename SDF_{FS_FROZEN => FREEZE_INITIATOR}
  gfs2: Reconfiguring frozen filesystem already rejected
  gfs2: Rename gfs2_freeze_lock{ => _shared }
  gfs2: Rename the {freeze,thaw}_super callbacks
  gfs2: Rename remaining "transaction" glock references
  gfs2: retry interrupted internal reads
  gfs2: Fix possible data races in gfs2_show_options()
  gfs2: Fix duplicate should_fault_in_pages() call
  gfs2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  gfs2: Don't remember delete unless it's successful
  gfs2: Update rl_unlinked before releasing rgrp lock
  gfs2: Fix gfs2_qa_get imbalance in gfs2_quota_hold
  ...

Vladimir Oltean says:

====================
dsa: Fix mangled link-local MAC DAs with SJA1105 DSA

The SJA1105 hardware tagging protocol is weird and will put DSA
information (source port, switch ID) in the MAC DA of the packets sent
to the CPU, and then send some additional (meta) packets which contain
the original bytes from the previous packet's MAC DA.

The tagging protocol driver contains logic to handle this, but the meta
frames are optional functionality, and there are configurations when
they aren't received (no PTP RX timestamping). Thus, the MAC DA from
packets sent to the stack is not correct in all cases.

Also, during testing it was found that the MAC DA patching procedure was
incorrect.

The investigation comes as a result of this discussion with Paolo:
https://lore.kernel.org/netdev/f494387c8d55d9b1d5a3e88beedeeb448f2e6cc3.camel@redhat.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

incl_srcpt has the limitation, mentioned in commit b4638af8 ("net:
dsa: sja1105: always enable the INCL_SRCPT option"), that frames with a
MAC DA of 01:80:c2:xx:yy:zz will be received as 01:80:c2:00:00:zz unless
PTP RX timestamping is enabled.

The incl_srcpt option was initially unconditionally enabled, then that
changed with commit 42824463 ("net: dsa: sja1105: Limit use of
incl_srcpt to bridge+vlan mode"), then again with b4638af8 ("net:
dsa: sja1105: always enable the INCL_SRCPT option"). Bottom line is that
it now needs to be always enabled, otherwise the driver does not have a
reliable source of information regarding source_port and switch_id for
link-local traffic (tag_8021q VLANs may be imprecise since now they
identify an entire bridging domain when ports are not standalone).

If we accept that PTP RX timestamping (and therefore, meta frame
generation) is always enabled in hardware, then that limitation could be
avoided and packets with any MAC DA can be properly received, because
meta frames do contain the original bytes from the MAC DA of their
associated link-local packet.

This change enables meta frame generation unconditionally, which also
has the nice side effects of simplifying the switch control path
(a switch reset is no longer required on hwtstamping settings change)
and the tagger data path (it no longer needs to be informed whether to
expect meta frames or not - it always does).

Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SJA1105 manual says that at offset 4 into the meta frame payload we
have "MAC destination byte 2" and at offset 5 we have "MAC destination
byte 1". These are counted from the LSB, so byte 1 is h_dest[ETH_HLEN-2]
aka h_dest[4] and byte 2 is h_dest[ETH_HLEN-3] aka h_dest[3].

The sja1105_meta_unpack() function decodes these the other way around,
so a frame with MAC DA 01:80:c2:11:22:33 is received by the network
stack as having 01:80:c2:22:11:33.

Fixes: e53e18a6 ("net: dsa: sja1105: Receive and decode meta frames")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

PPTP uses pppox sockets (struct pppox_sock). These sockets don't embed
an inet_sock structure, so it's invalid to call inet_sk() on them.

Therefore, the ip_route_output_ports() call in pptp_connect() has two
problems:

  * The tos variable is set with RT_CONN_FLAGS(sk), which calls
    inet_sk() on the pppox socket.

  * ip_route_output_ports() tries to retrieve routing flags using
    inet_sk_flowi_flags(), which is also going to call inet_sk() on the
    pppox socket.

While PPTP doesn't use inet sockets, it's actually really layered on
top of IP and therefore needs a proper way to do fib lookups. So let's
define pptp_route_output() to get a struct rtable from a pptp socket.
Let's also replace the ip_route_output_ports() call of pptp_xmit() for
consistency.

In practice, this means that:

  * pptp_connect() sets ->flowi4_tos and ->flowi4_flags to zero instead
    of using bits of unrelated struct pppox_sock fields.

  * pptp_xmit() now respects ->sk_mark and ->sk_uid.

  * pptp_xmit() now calls the security_sk_classify_flow() security
    hook, thus allowing to set ->flowic_secid.

  * pptp_xmit() now passes the pppox socket to xfrm_lookup_route().

Found by code inspection.

Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxsw_sp_crif_alloc() function returns NULL on error.  It doesn't
return error pointers.  Fix the check.

Fixes: 78126cfd ("mlxsw: spectrum_router: Maintain CRIF for fallback loopback RIF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more power management updates from Rafael Wysocki:
 "These add support for new hardware (ap807 and AM62A7), fix several
  issues in cpufreq drivers and in the operating performance points
  (OPP) framework, fix up intel_idle after recent changes and add
  documentation.

  Specifics:

   - Add missing __init annotation to one function in the intel_idle
     drvier (Rafael Wysocki)

   - Make intel_pstate use a correct scaling factor when mapping HWP
     performance levels to frequency values on hybrid-capable systems
     with disabled E-cores (Srinivas Pandruvada)

   - Fix Kconfig dependencies of the cpufreq-dt-platform driver (Viresh
     Kumar)

   - Add support to build cpufreq-dt-platdev as a module (Zhipeng Wang)

   - Don't allocate Sparc's cpufreq_driver dynamically (Viresh Kumar)

   - Add support for TI's AM62A7 platform (Vibhore Vardhan)

   - Add support for Armada's ap807 platform (Russell King (Oracle))

   - Add support for StarFive JH7110 SoC (Mason Huo)

   - Fix voltage selection for Mediatek Socs (Daniel Golle)

   - Fix error handling in Tegra's cpufreq driver (Christophe JAILLET)

   - Document Qualcomm's IPQ8074 in DT bindings (Robert Marko)

   - Don't warn for disabling a non-existing frequency for imx6q cpufreq
     driver (Christoph Niedermaier)

   - Use dev_err_probe() in Qualcomm's cpufreq driver (Andrew Halaney)

   - Simplify performance state related logic in the OPP core (Viresh
     Kumar)

   - Fix use-after-free and improve locking around lazy_opp_tables
     (Viresh Kumar, Stephan Gerhold)

   - Minor cleanups - using dev_err_probe() and rate-limiting debug
     messages (Andrew Halaney, Adrián Larumbe)"

* tag 'pm-6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits)
  cpufreq: intel_pstate: Fix scaling for hybrid-capable systems with disabled E-cores
  cpufreq: Make CONFIG_CPUFREQ_DT_PLATDEV depend on OF
  intel_idle: Add __init annotation to matchup_vm_state_with_baremetal()
  OPP: Properly propagate error along when failing to get icc_path
  OPP: Use dev_err_probe() when failing to get icc_path
  cpufreq: qcom-cpufreq-hw: Use dev_err_probe() when failing to get icc paths
  cpufreq: mediatek: correct voltages for MT7622 and MT7623
  cpufreq: armada-8k: add ap807 support
  OPP: Simplify the over-designed pstate <-> level dance
  OPP: pstate is only valid for genpd OPP tables
  OPP: don't drop performance constraint on OPP table removal
  OPP: Protect `lazy_opp_tables` list with `opp_table_lock`
  OPP: Staticize `lazy_opp_tables` in of.c
  cpufreq: dt-platdev: Support building as module
  opp: Fix use-after-free in lazy_opp_tables after probe deferral
  dt-bindings: cpufreq: qcom-cpufreq-nvmem: document IPQ8074
  cpufreq: dt-platdev: Blacklist ti,am62a7 SoC
  cpufreq: ti-cpufreq: Add support for AM62A7
  OPP: rate-limit debug messages when no change in OPP is required
  cpufreq: imx6q: don't warn for disabling a non-existing frequency
  ...

Pull more clk updates from Stephen Boyd:
 "Another set of clk driver updates and fixes for the merge window. The
  driver updates needed more time to bake in linux-next.

  Updates:
   - Support for more clk controllers in Qualcomm SoCs such as SM8350,
     SM8450, SDX75, SC8280XP, and IPQ9574
   - Runtime PM enablement of some more Qualcomm clk controllers
   - Various fixes to Qualcomm clk driver data to use correct clk_ops
     and to check halt bits properly
   - AT91 updates to modernize with clk_parent_data structures

  Fixes:
   - Remove 'syscon' from dt binding fix for ti,j721e-system-controller
   - Fix determine rate in the Tegra driver that got wrecked by the
     refactorting of muxes this merge window"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (69 commits)
  clk: tegra: Avoid calling an uninitialized function
  dt-bindings: mfd: ti,j721e-system-controller: Remove syscon from example
  clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id
  clk: at91: sama7g5: switch to parent_hw and parent_data
  clk: at91: sckc: switch to parent_data/parent_hw
  clk: at91: clk-sam9x60-pll: add support for parent_hw
  clk: at91: clk-utmi: add support for parent_hw
  clk: at91: clk-system: add support for parent_hw
  clk: at91: clk-programmable: add support for parent_hw
  clk: at91: clk-peripheral: add support for parent_hw
  clk: at91: clk-master: add support for parent_hw
  clk: at91: clk-generated: add support for parent_hw
  clk: at91: clk-main: add support for parent_data/parent_hw
  clk: qcom: gcc-sc8280xp: Add runtime PM
  clk: qcom: gpucc-sc8280xp: Add runtime PM
  clk: qcom: mmcc-msm8974: fix MDSS_GDSC power flags
  clk: qcom: gpucc-sm6375: Enable runtime pm
  dt-bindings: clock: sm6375-gpucc: Add VDD_GX
  clk: qcom: gcc-sm6115: Add missing PLL config properties
  clk: qcom: clk-alpha-pll: Add a way to update some bits of test_ctl(_hi)
  ...

Pull firewire updates from Takashi Sakamoto:
 "This consist of three parts; UAPI update, OHCI driver update, and
  several bug fixes.

  Firstly, the 1394 OHCI specification defines method to retrieve
  hardware time stamps for asynchronous communication, which was
  previously unavailable in user space. This adds new events to the
  UAPI, allowing applications to retrieve the time when asynchronous
  packet are received and sent. The new events are tested in the
  bleeding edge of libhinawa and look to work well. The new version of
  libhinawa will be released after current merge window is closed:

    https://git.kernel.org/pub/scm/libs/ieee1394/libhinawa.git/

  Secondly, the FireWire stack includes a PCM device driver for 1394
  OHCI hardware, This change modernizes the driver by managed resource
  (devres) framework.

  Lastly, bug fixes for firewire-net and firewire-core"

* tag 'firewire-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (25 commits)
  firewire: net: fix use after free in fwnet_finish_incoming_packet()
  firewire: core: obsolete usage of GFP_ATOMIC at building node tree
  firewire: ohci: release buffer for AR req/resp contexts when managed resource is released
  firewire: ohci: use devres for content of configuration ROM
  firewire: ohci: use devres for IT, IR, AT/receive, and AT/request contexts
  firewire: ohci: use devres for list of isochronous contexts
  firewire: ohci: use devres for requested IRQ
  firewire: ohci: use devres for misc DMA buffer
  firewire: ohci: use devres for MMIO region mapping
  firewire: ohci: use devres for PCI-related resources
  firewire: ohci: use devres for memory object of ohci structure
  firewire: fix warnings to generate UAPI documentation
  firewire: fix build failure due to missing module license
  firewire: cdev: implement new event relevant to phy packet with time stamp
  firewire: cdev: add new event to notify phy packet with time stamp
  firewire: cdev: code refactoring to dispatch event for phy packet
  firewire: cdev: implement new event to notify response subaction with time stamp
  firewire: cdev: add new event to notify response subaction with time stamp
  firewire: cdev: code refactoring to operate event of response
  firewire: core: implement variations to send request and wait for response with time stamp
  ...