- 29 Oct, 2023 3 commits
-
-
Lucas De Marchi authored
intel_cx0_phy.[ch] should contain the details about C10/C20, not leaking it to the rest of the driver. Start abstracting this by exporting a single PLL hw readout that handles the differences between C20 and C10 internally to that compilation unit. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Gustavo Sousa <gustavo.sousa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231018222831.4132968-2-lucas.demarchi@intel.com
-
Lucas De Marchi authored
With MTL adding PICA between the port and the real phy, the path add for DG2 stopped being followed and newer platforms are simply using the older path for TC phys. LNL is no different than MTL in this aspect, so just add it to the mess. In future the phy and port designation and deciding if it's TC should better be cleaned up. To make it just a bit better, also change intel_phy_is_snps() to show this is DG2-only. Signed-off-by:
-
Lucas De Marchi authored
For Lunar Lake, DDI-A is connected to C10 PHY, while TC1-TC3 are connected to C20 phy, like in Meteor Lake. Update the check in intel_is_c10phy() accordingly. This reverts the change in commit e388ae97 ("drm/i915/display: Eliminate IS_METEORLAKE checks") that turned that into a display engine version check. The phy <-> port connection is very SoC-specific and not related to that version. IS_LUNARLAKE() is defined to 0 in i915 as it's expected that the (upcoming) xe driver is the one defining the platform, with i915 only driving the display side. Bspec: 70818 Reviewed-by:
-
- 27 Oct, 2023 1 commit
-
-
Jani Nikula authored
Move sprite_name() where its only user is, and convert it to a function, removing the implicit dev_priv usage. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231011202259.1090131-1-jani.nikula@intel.com
-
- 26 Oct, 2023 25 commits
-
-
Mika Kahola authored
Every know and then we receive the following error when running for example IGT test kms_flip. [drm] *ERROR* PHY G Read 0d80 failed after 3 retries. [drm] *ERROR* PHY G Write 0d81 failed after 3 retries. Since the error is sporadic in nature, the patch proposes to reset the message bus after every successful or unsuccessful read or write operation. v2: Add FIXME's to indicate the experimental nature of this workaround (Rodrigo) v3: Dropping the additional delay as moving reset to *_read_once() and *_write_once() functions seem unnecessary delay Signed-off-by:Mika Kahola <mika.kahola@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016125544.719963-1-mika.kahola@intel.com
-
Vinod Govindapillai authored
Display device and display runtime info is exposed as part of i915_display_capabilities debugfs entry. Remove this information from i915_ capabilities as it is now reduntant. Signed-off-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Acked-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231024124109.384973-24-jouni.hogander@intel.com
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
v2: Change device parameter permissions to 0400 Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jouni Högander authored
Also make module parameter as non writable. Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Move enable_ips module parameter under display and change it as boolean. v2: - Change enable_ip as boolean - Fix copy paste error (i915_param -> intel_display_param) Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Move enable_sagv module parameter under display and change the parameter permissions to non-writblase (0400) v2: Change permissions to 0400 Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
Move psr related module parameters under display. Also fix error in enable_psr2_sel_fetch module parameter descrtiption. It was saying disabled by default while it's vice versa. Also psr_safest_params was missing default value in description. This is now added. v2: - Fix enable_psr2_sel_fetch description. - Add default value into psr_safest_params description. Signed-off-by:
-
Jouni Högander authored
Signed-off-by:
-
Jouni Högander authored
GPU error dump contained all module parameters. If we are moving display parameters to intel_display_params.[ch] they are not dumped into GPU error dump. This patch is adding moved display parameters back to GPU error dump. Display parameters are also included in i915_capabilities v2: Add parameters to i915_capabilities as well Signed-off-by:
-
Jouni Högander authored
Currently all module parameters are handled by i915_param.c/h. This is a problem for display parameters when Xe driver is used. Add a mechanism to add parameters specific to the display. This is mainly copied from i915_[debugfs]_params.[ch]. Parameters are not yet moved. This is done by subsequent patches. v2: - Drop unused predefinition (dentry) - Clarify need for empty INTEL_DISPLAY_PARAMS_FOR_EACH in comment Signed-off-by:
-
- 25 Oct, 2023 1 commit
-
-
Vinod Govindapillai authored
Create a separate debugfs entry to list the display capabilities IGT can rely on this debugfs entry for tests that depend on display device and display runtime info for both xe and i915 drivers. v2: rename the entry to i915_display_capabilities (Chaitanya) Signed-off-by:
-
- 23 Oct, 2023 6 commits
-
-
Jani Nikula authored
Remove an unnecessary include. Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231011162102.1030354-1-jani.nikula@intel.com
-
Jani Nikula authored
No reason to stick to dev_priv, rename to i915. Signed-off-by:
Nirmoy Das <nirmoy.das@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231011201533.1081368-2-jani.nikula@intel.com
-
Jani Nikula authored
Add separate macros for VLV/CHV registers without the implicit dev_priv, and with the display MMIO base baked in. A number of implicitly used dev_priv local variables can be removed. Signed-off-by:
-
Jani Nikula authored
No longer needed after commit 94bcf876 ("drm/i915/mtl: Drop Wa_14017240301"). Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231011142704.985867-1-jani.nikula@intel.com
-
Jouni Högander authored
Xe and i915 objects have differing implementation. Use intel_bo_to_drm_bo instead of obj->base as xe_bo doesn't have base pointer. Signed-off-by:
Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231012072158.4115795-3-jouni.hogander@intel.com
-
Jouni Högander authored
As a preparation for Xe we want to remove all i915_gem_object details away from frontbuffer tacking code. Due to this move releasing gem object reference to i915_gem_object_set_frontbuffer. Signed-off-by:
-
- 18 Oct, 2023 1 commit
-
-
Radhakrishna Sripada authored
Meteor Lake has demonstrated consistent stability for some time. All user-space API modifications tide to its core platform functions are operational. The necessary firmware components are set up and comprehensive testing has been condused over a period. Given the recent faborable CI results, as well, we believe it's time to eliminate the 'force_probe' prerequisite and activate the platform by default. Signed-off-by:
Aditya Chauhan <aditya.chauhan@intel.com> Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
Chris Wilson <chris.p.wilson@linux.intel.com> Signed-off-by:
Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Signed-off-by:
Jonathan Cavitt <jonathan.cavitt@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Lee Shawn C <shawn.c.lee@intel.com> Tested-by:
Karthik B S <karthik.b.s@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231008164824.919262-1-andi.shyti@linux.intel.com
-
- 16 Oct, 2023 3 commits
-
-
Ville Syrjälä authored
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Signed-off-by: -
Ville Syrjälä authored
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Signed-off-by: -
Ville Syrjälä authored
Just use a simple {} to zero initialize arrays/structs instead of the hodgepodge of stuff we are using currently. Signed-off-by:
-
