- 22 Jun, 2005 40 commits
-
-
Benjamin Herrenschmidt authored
This patch kills the whole embedded System.map mecanism and the bootloader-passed System.map that was used to provide symbol resolution in xmon. Instead, xmon now uses kallsyms like ppc64 does. No hurry getting that in Linus tree, let it be tested in -mm for a while first and make sure it doesn't break various embedded configs. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Jakub Bogusz authored
This patch avoids recursive crash (leading to kernel stack overflow) in die() on CHRP/PReP machines when CONFIG_PMAC_BACKLIGHT=y. set_backlight_* functions are placed in pmac section, which is discarded when _machine != _MACH_Pmac. Signed-off-by:
Jakub Bogusz <qboosh@pld-linux.org> Acked-by:
-
Kumar Gala authored
Fight the Good Fight: Limit prom.h header creep. Signed-off-by:
Jon Loeliger <jdl@freescale.com> Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Kumar Gala authored
4xx and Book-E PPC's have several exception levels. The code to handle each level is fairly regular. Turning the code into macro's will ease the handling of future exception levels (debug) in forth coming chips. Signed-off-by:
-
Kumar Gala authored
Made the number of TLB CAM entries private and converted the board consumers to use num_tlbcam_entries which is setup at boot time from configuration registers. This way the only consumers of the #define NUM_TLBCAMS are the arrays used to manage the TLB. Signed-off-by:
-
Kumar Gala authored
The MPC8548 has 48 internal interrupts and 12 external interrupts. The previous generation PowerQUICC III devices only had 32 internal and 12 external interrupts on the primary interrupt controller. Expanded the number of internal interrupts to 48 for all PowerQUICC III processors and moved the interrupt numbers for the external after the 48 internal interrupt lines, rather than putting the 12 new internal interrupts at the end and ifdef'ng the whole mess. As parted of this created a macro which represents the internal interrupt senses since they are the same on all PQ3 processors. Signed-off-by:
-
Matt Porter authored
Removes ppc4xx_kgdb.c which is no longer being used. Pointed out by Andrei Konovalov. Signed-off-by:
Matt Porter <mporter@kernel.crashing.org> Signed-off-by:
-
Kumar Gala authored
Added platform device initialization for the two 8250 style UARTs that exist on the MPC8245. Additionally, updated the Sandpoint code to enable one of these UARTs if an MPC8245 is connected to it. Signed-off-by:
Matt McClintock <msm@freescale.com> Signed-off-by:
-
Matt Porter authored
This patch is virtually identical to my previous 44x one. It removes 0x8000'0000 TASK_SIZE hardcoded assumption from head_4xx.S. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
-
Matt Porter authored
Adds SCC2 pin routing specific to the GP3 board. Signed-off-by:
-
Kumar Gala authored
Converted the MPC10x bridge support (used by MPC10x and 8240/1/5) to used the standard platform device model. Signed-off-by:
-
Kumar Gala authored
Previously we needed CONFIG_CPM2 enabled to get the proper IRQ ifdef's for CPM interrupts. Recent changes have caused that to be no longer necessary. Signed-off-by:
-
Kumar Gala authored
Adds support for using the MPC8548 processor on the CDS reference board. Currently all the major busses (PCI, PCI-X, PCI-Express, sRIO) and eTSEC3 and eTSEC4 are not supported. Signed-off-by:
-
Kumar Gala authored
Added descriptions of the new MPC8548 family processors, e500 core and peripherals. Signed-off-by:
-
Gerald Schaefer authored
There is a memory leak during mount when SELinux is active and mount options are specified. Signed-off-by:
Gerald Schaefer <geraldsc@de.ibm.com> Acked-by:
Stephen Smalley <sds@epoch.ncsc.mil> Signed-off-by:
-
Gerald Schaefer authored
There is a memory leak during mount when CONFIG_SECURITY is enabled and mount options are specified. Signed-off-by:
James Morris <jmorris@redhat.com> Signed-off-by:
-
Coywolf Qi Hunt authored
I am always trying to make sure I've booted the right kernel after a new install. Too paranoid maybe. But I guess there're other people like me. So let's make kbuild display the compile version number at the end to give us a hint. I know we may be booting vmlinux someday, but don't care about it for now. Signed-off-by:
Coywolf Qi Hunt <coywolf@lovecn.org> Signed-off-by:
-
John W. Linville authored
Remove the superfluous test of "if (vortex_debug > 3)" inside the "if (vortex_debug > 6)" clause early in boomerang_start_xmit. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Denis Vlasenko authored
OOM killer prints a stray newline. Signed-off-by:
-
Abhijit Karmarkar authored
It's common practice to msync a large address range regularly, in which often only a few ptes have actually been dirtied since the previous pass. sync_pte_range then goes much faster if it tests whether pte is dirty before locating and accessing each struct page cacheline; and it is hardly slowed by ptep_clear_flush_dirty repeating that test in the opposite case, when every pte actually is dirty. But beware, s390's pte_dirty always says false, since its dirty bit is kept in the storage key, located via the struct page address. So skip this optimization in its case: use a pte_maybe_dirty macro which just says true if page_test_and_clear_dirty is implemented. Signed-off-by:
Abhijit Karmarkar <abhijitk@veritas.com> Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Hugh Dickins authored
Remember that ironic get_user_pages race? when the raised page_count on a page swapped out led do_wp_page to decide that it had to copy on write, so substituted a different page into userspace. 2.6.7 onwards have Andrea's solution, where try_to_unmap_one backs out if it finds page_count raised. Which works, but is unsatisfying (rmap.c has no other page_count heuristics), and was found a few months ago to hang an intensive page migration test. A year ago I was hesitant to engage page_mapcount, now it seems the right fix. So remove the page_count hack from try_to_unmap_one; and use activate_page in unuse_mm when dropping lock, to replace its secondary effect of helping swapoff to make progress in that case. Simplify can_share_swap_page (now called only on anonymous pages) to check page_mapcount + page_swapcount == 1: still needs the page lock to stabilize their (pessimistic) sum, but does not need swapper_space.tree_lock for that. In do_swap_page, move swap_free and unlock_page below page_add_anon_rmap, to keep sum on the high side, and correct when can_share_swap_page called. Signed-off-by:
-
Hugh Dickins authored
A small optimization to do_wp_page's check for whether to avoid copy by reusing the page already mapped. It can never share a cached file page, nor can it share a reserved page (often the empty zero page), so it's a waste of time to lock and unlock in those cases. Which nowadays can both be neatly excluded by a preliminary PageAnon test. Christoph has reported that a preliminary page_count test proved valuable for scalability here, but PageAnon covers more common cases all at once. Signed-off-by:
-
Hugh Dickins authored
Since its birth, get_user_pages has been calling a misguided get_page_map function. follow_page has already returned NULL if the pfn is invalid, we cannot reach an invalid pfn from a validated struct page. Remove get_page_map, and the messy rewind in get_user_pages to cope with its failure. Oh, and could we please call that "struct page *page" like everywhere else, instead of "struct page *map"? Signed-off-by:
-
Hugh Dickins authored
rme96xx busmaster_malloc miscalculates and fails to set PageReserved on any page of char *buf; but busmaster_free does it right, so do the same (I don't have the card, just noticed this while sifting for rmap BUGs). Signed-off-by:
-
Hugh Dickins authored
Since free_pages_check complains if PG_reclaim or PG_slab is set, bad_page ought to clear them to avoid repetitive reports (Nikita noticed this too). Let prep_new_page check page_count and PG_slab as free_pages_check does. Signed-off-by:
-
Hugh Dickins authored
Remove part of comment on linking new vma in dup_mmap: since anon_vma rmap came in, try_to_unmap_one knows the vma without needing find_vma. But add a comment to note that here vma is inserted without mmap_sem. Signed-off-by:
-
Hugh Dickins authored
Strict mbind's check for currently mapped pages being on node has been using a slow loop which re-evaluates pgd, pud, pmd, pte for each entry: replace that by a standard four-level page table walk like others in mm. Since mmap_sem is held for writing, page_table_lock can be taken at the inner level to limit latency. Signed-off-by:
-
Hugh Dickins authored
Strict mbind's check that pages already mapped are on right node has been using pte_page without checking if pfn_valid, and without page_table_lock to prevent spurious failures when try_to_unmap_one intervenes between the pte_present and the pte_page. Signed-off-by:
-
Bob Picco authored
pfn_to_nid is undefined. We haven't had this interface on ia64. The sys_mbind patches need it. Oh, the paddr_to_nid call could fail when DISCONTIG+NUMA is configured because there isn't any ACPI SRAT NUMA information. Signed-off-by:
Bob Picco <bob.picco@hp.com> Acked-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Hugh Dickins authored
To improve shmem scalability, we allowed tmpfs instances which don't need their blocks or inodes limited not to count them, and not to allocate any sbinfo. Which was okay when the only use for the sbinfo was accounting blocks and inodes; but since then a couple of unrelated projects extending tmpfs want to store other data in the sbinfo. Whether either extension reaches mainline is beside the point: I'm guilty of a bad design decision, and should restore sbinfo to make any such future extensions easier. So, once again allocate a shmem_sb_info for every shmem/tmpfs instance, and now let max_blocks 0 indicate unlimited blocks, and max_inodes 0 unlimited inodes. Brent Casavant verified (many months ago) that this does not perceptibly impact the scalability (since the unlimited sbinfo cacheline is repeatedly accessed but only once dirtied). And merge shmem_set_size into its sole caller shmem_remount_fs. Signed-off-by:
-
Jes Sorensen authored
This patch contains the bits to make the XPC code use the uncached allocator rather than calling into the mspec driver. It also includes the mspec.h header which is required to build the XPC modules. Signed-off-by:
Jes Sorensen <jes@wildopensource.com> Signed-off-by:
-
Jes Sorensen authored
This patch contains the ia64 uncached page allocator and the generic allocator (genalloc). The uncached allocator was formerly part of the SN2 mspec driver but there are several other users of it so it has been split off from the driver. The generic allocator can be used by device driver to manage special memory etc. The generic allocator is based on the allocator from the sym53c8xx_2 driver. Various users on ia64 needs uncached memory. The SGI SN architecture requires it for inter-partition communication between partitions within a large NUMA cluster. The specific user for this is the XPC code. Another application is large MPI style applications which use it for synchronization, on SN this can be done using special 'fetchop' operations but it also benefits non SN hardware which may use regular uncached memory for this purpose. Performance of doing this through uncached vs cached memory is pretty substantial. This is handled by the mspec driver which I will push out in a seperate patch. Rather than creating a specific allocator for just uncached memory I came up with genalloc which is a generic purpose allocator that can be used by device drivers and other subsystems as they please. For instance to handle onboard device memory. It was derived from the sym53c7xx_2 driver's allocator which is also an example of a potential user (I am refraining from modifying sym2 right now as it seems to have been under fairly heavy development recently). On ia64 memory has various properties within a granule, ie. it isn't safe to access memory as uncached within the same granule as currently has memory accessed in cached mode. The regular system therefore doesn't utilize memory in the lower granules which is mixed in with device PAL code etc. The uncached driver walks the EFI memmap and pulls out the spill uncached pages and sticks them into the uncached pool. Only after these chunks have been utilized, will it start converting regular cached memory into uncached memory. Hence the reason for the EFI related code additions. Signed-off-by:
-
Christoph Lameter authored
Reduce size of the huge per_cpu_pageset structure in __initdata introduced into mm1 with the pageset localization patchset. Use one specially configured pageset per cpu for all zones and nodes during bootup. - Avoid duplication of pageset initialization code. - do the adding to the pageset list before potential free_pages_bulk in free_hot_cold_page (otherwise we would have to hold a page in a pageset during the period that the boot pagesets are in use). - remove mistaken __cpuinitdata attribute and revert back to __initdata for the boot pageset. A boot pageset is not necessary for cpu hotplug. Tested for UP SMP NUMA on x86_64 (2.6.12-rc6-mm1): UP SMP NUMA Tested on IA64 (2.6.12-rc5-mm2): NUMA (2.6.12-rc6-mm1 broken for IA64 because of sparsemem patches) Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Christoph Lameter authored
The pageset array can potentially acquire a huge amount of memory on large NUMA systems. F.e. on a system with 512 processors and 256 nodes there will be 256*512 pagesets. If each pageset only holds 5 pages then we are talking about 655360 pages.With a 16K page size on IA64 this results in potentially 10 Gigabytes of memory being trapped in pagesets. The typical cases are much less for smaller systems but there is still the potential of memory being trapped in off node pagesets. Off node memory may be rarely used if local memory is available and so we may potentially have memory in seldom used pagesets without this patch. The slab allocator flushes its per cpu caches every 2 seconds. The following patch flushes the off node pageset caches in the same way by tying into the slab flush. The patch also changes /proc/zoneinfo to include the number of pages currently in each pageset. Signed-off-by:
-
Janet Morgan authored
This patch provides more debug info when the system is OOM. It displays memory stats (basically sysrq-m info) from __alloc_pages() when page allocation fails and during OOM kill. Thanks to Dave Jones for coming up with the idea. Signed-off-by:
Janet Morgan <janetmor@us.ibm.com> Signed-off-by:
-
Benjamin LaHaise authored
By making the offset argument of __read_page_state an unsigned long instead of unsigned, we can avoid forcing the compiler to sign extend a usually constant argument. This saves 1 instruction on x86-64. Signed-off-by:
Benjamin LaHaise <benjamin.c.lahaise@intel.com> Signed-off-by:
-
Benjamin LaHaise authored
By making the offset argument of __mod_page_state an unsigned long instead of unsigned, we can avoid forcing the compiler to sign extend a usually constant argument. This saves 1 instruction on x86-64. Signed-off-by:
-
Darren Hart authored
try_to_free_pages accepts a third argument, order, but hasn't used it since before 2.6.0. The following patch removes the argument and updates all the calls to try_to_free_pages. Signed-off-by:
Darren Hart <dvhltc@us.ibm.com> Signed-off-by:
-
Badari Pulavarty authored
Remove PG_highmem, to save a page flag. Use is_highmem() instead. It'll generate a little more code, but we don't use PageHigheMem() in many places. Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by:
-
Chris Wright authored
The topdown changes in 2.6.12-rc1 can cause large allocations with large stack limit to fail, despite there being space available. The mmap_base-len is only valid when len >= mmap_base. However, nothing in topdown allocator checks this. It's only (now) caught at higher level, which will cause allocation to simply fail. The following change restores the fallback to bottom-up path, which will allow large allocations with large stack limit to potentially still succeed. Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
-
