- 29 Nov, 2022 33 commits
-
-
Aric Cyr authored
This version brings along following fixes: -Program output transfer function when required -Fix arthmetic errror in MALL size caluclations for subvp -DCC Meta pitch used for MALL allocation -Debugfs entry to tell if connector is DPIA link -Use largest vready_offset in pipe group -Fixes race condition in DPIA Aux transfer Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Jasdeep Dhillon <jdhillon@amd.com> Signed-off-by:
Aric Cyr <Aric.Cyr@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Wesley Chalmers authored
[WHY] Corruption can occur in LB if vready_offset is not large enough. DML calculates vready_offset for each pipe, but we currently select the top pipe's vready_offset, which is not necessarily enough for all pipes in the group. [HOW] Wherever program_global_sync is currently called, iterate through the entire pipe group and find the highest vready_offset. Reviewed-by:
Dillon Varone <Dillon.Varone@amd.com> Acked-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by:
-
Xiongfeng Wang authored
As comment of pci_get_class() says, it returns a pci_device with its refcount increased and decreased the refcount for the input parameter @from if it is not NULL. If we break the loop in radeon_atrm_get_bios() with 'pdev' not NULL, we need to call pci_dev_put() to decrease the refcount. Add the missing pci_dev_put() to avoid refcount leak. Fixes: d8ade352 ("drm/radeon: handle non-VGA class pci devices with ATRM") Fixes: c61e2775 ("drm/radeon: split ATRM support out from the ATPX handler (v3)") Signed-off-by:
Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by:
-
Dan Carpenter authored
We re-arranged this code recently so "ret" is always zero at this point. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by:
-
Yu Songping authored
The logical operator '&&' will make smu->ppt_funcs->set_gfx_power_up_by_imu segment fault when smu->ppt_funcs is NULL. Signed-off-by:
Yu Songping <yusongping@huawei.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Yushan Zhou authored
release_firmware() checks whether firmware pointer is NULL. Remove the redundant NULL check in psp_sw_fini(). Signed-off-by:
Yushan Zhou <katrinzhou@tencent.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
Veerabadhran Gopalakrishnan authored
Corrected the typo in the 4K resolution parameters. Fixes: b3a24461 ("amdgpu/nv.c - Added codec query for Beige Goby") Fixes: 9075096b ("amdgpu/nv.c - Optimize code for video codec support structure") Fixes: 9ac0edaa ("drm/amdgpu: add vcn_4_0_0 video codec query") Signed-off-by:
Veerabadhran Gopalakrishnan <veerabadhran.gopalakrishnan@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Liang He authored
In amdgpu_get_xgmi_hive(), we should not call kfree() after kobject_put() as the PUT will call kfree(). In amdgpu_device_ip_init(), we need to check the returned *hive* which can be NULL before we dereference it. Signed-off-by:
Liang He <windhl@126.com> Reviewed-by:
-
Tim Huang authored
Enable PSP FW loading for PSP IP v13.0.11 Signed-off-by:
Tim Huang <tim.huang@amd.com> Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
-
Saleemkhan Jamadar authored
This enable VCN PG, CG and JPEG PG, CG Signed-off-by:
Saleemkhan Jamadar <saleemkhan.jamadar@amd.com> Reviewed-by:
Leo Liu <leo.liu@amd.com> Signed-off-by:
-
Yifan Zhang authored
this patch is to enable nbio support for NBIO v7.7.1. Signed-off-by:
-
Tim Huang authored
The SMU IP v13.0.4 ppt interface is shared by IP v13.0.11, they use the different mailbox register offset. So use the specific mailbox registers offset for v13.0.4. Signed-off-by:
-
Tim Huang authored
Set the default reset method to mode2 for SMU IP v13.0.11 Signed-off-by:
-
Yifan Zhang authored
Enable the SMU IP v13.0.11 GFXOFF control Signed-off-by:
-
Yifan Zhang authored
this patch to add smu 13 support for smu 13.0.11. Signed-off-by:
-
Yifan Zhang authored
Add the entry to set the ppt functions for SMU IP v13.0.11. Signed-off-by:
-
Yifan Zhang authored
Add initial support for GC 11.0.4 in KFD compute driver. Signed-off-by:
-
Yifan Zhang authored
Add gmc v11 support for GC 11.0.4. Signed-off-by:
-
Yifan Zhang authored
Add common soc21 ip block support for GC 11.0.4. Signed-off-by:
-
Yifan Zhang authored
this patch to add GC 11.0.4 gfx support to gfx11 implementation. Signed-off-by:
-
Yifan Zhang authored
Set the APU flag appropriately for GC 11.0.4. Signed-off-by:
-
Yifan Zhang authored
this patch is to set GC 11.0.4 family. Signed-off-by:
-
Tim Huang authored
Add PSP IP v13.0.11 ip discovery support. Signed-off-by:
-
Yifan Zhang authored
this patch is to enable mes for GC 11.0.4. Signed-off-by:
-
Yifan Zhang authored
Enable gfx v11 for GC 11.0.4. Signed-off-by:
-
Yifan Zhang authored
Enable gmc (graphic memory controller) v11 for GC 11.0.4. Signed-off-by:
-
Yifan Zhang authored
Enable soc21 common for GC 11.0.4. Signed-off-by:
-
Likun Gao authored
vram_usagebyfirmware v2_2 is only used in SRIOV case, skip the related settings in bare-metal case currently. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
Guchun Chen authored
Add an explicit printing to tell when finishing rpm execution in amdgpu. Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
-
Guchun Chen authored
After executing BACO exit, driver needs to poll the status to ensure FW has completed BACO exit sequence to prevent timing issue. v2: use usleep_range to replace msleep to fix checkpatch.pl warnings Signed-off-by:
-
Guchun Chen authored
Return true early if ASIC is in BACO state already, no need to talk to SMU. It can fix the issue that driver was not calling BACO exit at all in runtime pm resume, and a timing issue leading to a PCI AER error happened eventually. Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Suggested-by:
-
Tong Liu01 authored
For vram_usagebyfirmware_v2_2, fw_vram_reserve is not used. So fw_vram_usage_va is NULL, and cannot do virt data exchange anymore. Should add drv_vram_usage_va to do virt data exchange in vram_usagebyfirmware_v2_2 case. And refine some code style checks in pre add vram reservation logic patch Signed-off-by:
Tong Liu01 <Tong.Liu01@amd.com> Acked-by:
-
James Zhu authored
-v2: 1. rename variable to redue confuse 2. optimize the code -v3: move new define out of the middle of the code -v4: squash in minmax error fix (Luben) When applications try to allocate large system (more than > 128GB), "stall cpu" is reported. for such large system memory, walk_page_range takes more than 20s usually. The warning message can be removed when splitting hmm range into smaller ones which is not more 64GB for each walk_page_range. [ 164.437617] amdgpu:amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu:1753: amdgpu: create BO VA 0x7f63c7a00000 size 0x2f16000000 domain CPU [ 164.488847] amdgpu:amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu:1785: amdgpu: creating userptr BO for user_addr = 7f63c7a00000 [ 185.439116] rcu: INFO: rcu_sched self-detected stall on CPU [ 185.439125] rcu: 8-....: (20999 ticks this GP) idle=e22/1/0x4000000000000000 softirq=2242/2242 fqs=5249 [ 185.439137] (t=21000 jiffies g=6325 q=1215) [ 185.439141] NMI backtrace for cpu 8 [ 185.439143] CPU: 8 PID: 3470 Comm: kfdtest Kdump: loaded Tainted: G O 5.12.0-0_fbk5_zion_rc1_5697_g2c723fb88626 #1 [ 185.439147] Hardware name: HPE ProLiant XL675d Gen10 Plus/ProLiant XL675d Gen10 Plus, BIOS A47 11/06/2020 [ 185.439150] Call Trace: [ 185.439153] <IRQ> [ 185.439157] dump_stack+0x64/0x7c [ 185.439163] nmi_cpu_backtrace.cold.7+0x30/0x65 [ 185.439165] ? lapic_can_unplug_cpu+0x70/0x70 [ 185.439170] nmi_trigger_cpumask_backtrace+0xf9/0x100 [ 185.439174] rcu_dump_cpu_stacks+0xc5/0xf5 [ 185.439178] rcu_sched_clock_irq.cold.97+0x112/0x38c [ 185.439182] ? tick_sched_handle.isra.21+0x50/0x50 [ 185.439185] update_process_times+0x8c/0xc0 [ 185.439189] tick_sched_timer+0x63/0x70 [ 185.439192] __hrtimer_run_queues+0xff/0x250 [ 185.439195] hrtimer_interrupt+0xf4/0x200 [ 185.439199] __sysvec_apic_timer_interrupt+0x51/0xd0 [ 185.439201] sysvec_apic_timer_interrupt+0x69/0x90 [ 185.439206] </IRQ> [ 185.439207] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 185.439211] RIP: 0010:clear_page_rep+0x7/0x10 [ 185.439214] Code: e8 fe 7c 51 00 44 89 e2 48 89 ee 48 89 df e8 60 ff ff ff c6 03 00 5b 5d 41 5c c3 cc cc cc cc cc cc cc cc b9 00 02 00 00 31 c0 <f3> 48 ab c3 0f 1f 44 00 00 31 c0 b9 40 00 00 00 66 0f 1f 84 00 00 [ 185.439218] RSP: 0018:ffffc9000f58f818 EFLAGS: 00000246 [ 185.439220] RAX: 0000000000000000 RBX: 0000000000000881 RCX: 000000000000005c [ 185.439223] RDX: 0000000000100dca RSI: 0000000000000000 RDI: ffff88a59e0e5d20 [ 185.439225] RBP: ffffea0096783940 R08: ffff888118c35280 R09: ffffea0096783940 [ 185.439227] R10: ffff888000000000 R11: 0000160000000000 R12: ffffea0096783980 [ 185.439228] R13: ffffea0096783940 R14: ffff88b07fdfdd00 R15: 0000000000000000 [ 185.439232] prep_new_page+0x81/0xc0 [ 185.439236] get_page_from_freelist+0x13be/0x16f0 [ 185.439240] ? release_pages+0x16a/0x4a0 [ 185.439244] __alloc_pages_nodemask+0x1ae/0x340 [ 185.439247] alloc_pages_vma+0x74/0x1e0 [ 185.439251] __handle_mm_fault+0xafe/0x1360 [ 185.439255] handle_mm_fault+0xc3/0x280 [ 185.439257] hmm_vma_fault.isra.22+0x49/0x90 [ 185.439261] __walk_page_range+0x692/0x9b0 [ 185.439265] walk_page_range+0x9b/0x120 [ 185.439269] hmm_range_fault+0x4f/0x90 [ 185.439274] amdgpu_hmm_range_get_pages+0x24f/0x260 [amdgpu] [ 185.439463] amdgpu_ttm_tt_get_user_pages+0xc2/0x190 [amdgpu] [ 185.439603] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x49f/0x7a0 [amdgpu] [ 185.439774] kfd_ioctl_alloc_memory_of_gpu+0xfb/0x410 [amdgpu] Signed-off-by:James Zhu <James.Zhu@amd.com> Reviewed-by:
-
- 23 Nov, 2022 7 commits
-
-
Alex Deucher authored
This partially reverts 20543be9. Calling drm_connector_update_edid_property() in amdgpu_connector_free_edid() causes a noticeable pause in the system every 10 seconds on polled outputs so revert this part of the change. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2257 Cc: Claudio Suarez <cssk@net-c.es> Acked-by:
-
Alex Deucher authored
The driver is MIT, so add the licenses. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2265Acked-by:
-
Tao Zhou authored
Configure related settings to enable it. Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Signed-off-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Felix Kuehling authored
Move the topology-locked part of kfd_topology_add_device into a separate function to simlpify error handling and release the topology lock consistently. Reported-by:
Felix Kuehling <felix.kuehling@gmail.com> Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Reviewed-by:
-
Tao Zhou authored
Prepare for enableing VCN RAS poison. v2: move SHIFT and MASK definitions to related sh_mask.h file. Signed-off-by:
-
Shikang Fan authored
- in device_resume, sriov configure interrupt should be in full access, so release_full_gpu should be done after kfd_resume. - remove the previous workaround solution for sriov. Fixes: ec4927d4 ("drm/amdgpu: fix for suspend/resume sequence under sriov") Signed-off-by:
Shikang Fan <shikang.fan@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
[Why&How] If the timing generator isnt running, it does not make sense to trigger a sync on the corresponding OTG. Check this condition before starting. Otherwise, this will cause error like: *ERROR* GSL: Timeout on reset trigger! Fixes: dc55b106 ("drm/amd/display: Disable phantom OTG after enable for plane disable") Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
-
