- 17 Aug, 2023 4 commits
-
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-6.5-2023-08-16' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.5-2023-08-16: amdgpu: - SMU 13.x fixes - Fix mcbp parameter for gfx9 - SMU 11.x fixes - Temporary fix for large numbers of XCP partitions - S0ix fixes - DCN 2.0 fix Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230816200226.10771-1-alexander.deucher@amd.com
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
One EPROBE_DEFER handling fix for the JDI LT070ME05000, a timing fix for the AUO G121EAN01 panel, an integer overflow and a memory leak fixes for the qaic accel, a use-after-free fix for nouveau and a revert for an alleged fix in EDID parsing. Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-intel-fixes-2023-08-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix the flow for ignoring GuC SLPC efficient frequency selection (Vinay) - Fix SDVO panel_type initialization (Jani) - Fix display probe for IVB Q and IVB D GT2 server (Jani) Signed-off-by:
-
Jani Nikula authored
This reverts commit ca62297b. Commit ca62297b ("drm/edid: Fix csync detailed mode parsing") fixed EDID detailed mode sync parsing. Unfortunately, there are quite a few displays out there that have bogus (zero) sync field that are broken by the change. Zero means analog composite sync, which is not right for digital displays, and the modes get rejected. Regardless, it used to work, and it needs to continue to work. Revert the change. Rejecting modes with analog composite sync was the part that fixed the gitlab issue 8146 [1]. We'll need to get back to the drawing board with that. [1] https://gitlab.freedesktop.org/drm/intel/-/issues/8146 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8789 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8930 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9044 Fixes: ca62297b ("drm/edid: Fix csync detailed mode parsing") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.4+ Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Acked-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230815101907.2900768-1-jani.nikula@intel.com
-
- 16 Aug, 2023 10 commits
-
-
Karol Herbst authored
We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit. Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/ Fixes: 95983aea ("drm/nouveau/disp: add connector class") Signed-off-by:
Karol Herbst <kherbst@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com
-
Alex Deucher authored
This reverts commit 27dd79c0. It appears MPC_SPLIT_DYNAMIC still causes problems with multiple displays on DCN2.0 hardware. Switch back to MPC_SPLIT_AVOID_MULT_DISP. This increases power usage with multiple displays, but avoids hangs. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2475 Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.4.x
-
Mario Limonciello authored
DCN 3.1.4 is reported to hang on s2idle entry if graphics activity is happening during entry. This is because GFXOFF was scheduled as delayed but RLC gets disabled in s2idle entry sequence which will hang GFX IP if not already in GFXOFF. To help this problem, flush any delayed work for GFXOFF early in s2idle entry sequence to ensure that it's off when RLC is changed. commit 4b31b92b ("drm/amdgpu: complete gfxoff allow signal during suspend without delay") modified power gating flow so that if called in s0ix that it ensured that GFXOFF wasn't put in work queue but instead processed immediately. This is dead code due to commit 10cb67eb ("drm/amdgpu: skip CG/PG for gfx during S0ix") because GFXOFF will now not be explicitly called as part of the suspend entry code. Remove that dead code. Signed-off-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
Tim Huang <tim.huang@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Tim Huang authored
GFX v11.0.1 reported fence fallback timer expired issue on SDMA and GFX rings after S0ix resume. This is generated by EOP interrupts are disabled when S0ix suspend but fails to re-enable when resume because of the GFX is in GFXOFF. [ 203.349571] [drm] Fence fallback timer expired on ring sdma0 [ 203.349572] [drm] Fence fallback timer expired on ring gfx_0.0.0 [ 203.861635] [drm] Fence fallback timer expired on ring gfx_0.0.0 For S0ix, GFX is in GFXOFF state, avoid to touch the GFX registers to configure the fence driver interrupts for rings that belong to GFX. The interrupts configuration will be restored by GFXOFF exit. Signed-off-by:
-
James Zhu authored
Return 0 when drm device alloc failed with -ENOSPC in order to allow amdgpu drive loading. But the xcp without drm device node assigned won't be visiable in user space. This helps amdgpu driver loading on system which has more than 64 nodes, the current limitation. The proposal to add more drm nodes is discussed in public, which will support up to 2^20 nodes totally. kernel drm: https://lore.kernel.org/lkml/20230724211428.3831636-1-michal.winiarski@intel.com/T/ libdrm: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/305Signed-off-by:
James Zhu <James.Zhu@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Asad Kamal authored
Update addresses of PCIE link width registers, & link width format used to populate gpu metrics table for smu v13.0.6 v2: Removed ESM register update v3: Updated patch subject and message Signed-off-by:
Asad Kamal <asad.kamal@amd.com> Reviewed-by:
-
Lijo Lazar authored
Temperature needs to be reported in millidegree Celsius. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Signed-off-by:
-
Umio Yasuno authored
Use the right metrics table version based on the firmware. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2720Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
Umio Yasuno <coelacanth_dream@protonmail.com> Signed-off-by:
-
Jiadong Zhu authored
The parameter amdgpu_mcbp shall have priority against the default value calculated from the chip version. User could disable mcbp by setting the parameter mcbp as zero. v2: do not trigger preemption in sw ring muxer when mcbp is disabled. Signed-off-by:
Jiadong Zhu <Jiadong.Zhu@amd.com> Acked-by:
-
Kenneth Feng authored
drm/amd/pm: disallow the fan setting if there is no fan on smu 13.0.0 V2: depend on pm.no_fan to check Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Reviewed-by:
-
- 15 Aug, 2023 2 commits
-
-
Dan Carpenter authored
The encode_dma() function has some validation on in_trans->size but it would be more clear to move those checks to find_and_map_user_pages(). The encode_dma() had two checks: if (in_trans->addr + in_trans->size < in_trans->addr || !in_trans->size) return -EINVAL; The in_trans->addr variable is the starting address. The in_trans->size variable is the total size of the transfer. The transfer can occur in parts and the resources->xferred_dma_size tracks how many bytes we have already transferred. This patch introduces a new variable "remaining" which represents the amount we want to transfer (in_trans->size) minus the amount we have already transferred (resources->xferred_dma_size). I have modified the check for if in_trans->size is zero to instead check if in_trans->size is less than resources->xferred_dma_size. If we have already transferred more bytes than in_trans->size then there are negative bytes remaining which doesn't make sense. If there are zero bytes remaining to be copied, just return success. The check in encode_dma() checked that "addr + size" could not overflow and barring a driver bug that should work, but it's easier to check if we do this in parts. First check that "in_trans->addr + resources->xferred_dma_size" is safe. Then check that "xfer_start_addr + remaining" is safe. My final concern was that we are dealing with u64 values but on 32bit systems the kmalloc() function will truncate the sizes to 32 bits. So I calculated "total = in_trans->size + offset_in_page(xfer_start_addr);" and returned -EINVAL if it were >= SIZE_MAX. This will not affect 64bit systems. Fixes: 129776ac ("accel/qaic: Add control path") Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by:
Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by:
-
Pranjal Ramajor Asha Kanojiya authored
The temporary buffer storing slicing configuration data from user is only freed on error. This is a memory leak. Free the buffer unconditionally. Fixes: ff13be83 ("accel/qaic: Add datapath") Signed-off-by:
Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by:
-
- 14 Aug, 2023 5 commits
-
-
Jani Nikula authored
The current display probe is unable to differentiate between IVB Q and IVB D GT2 server, as they both have the same device id, but different subvendor and subdevice. This leads to the latter being misidentified as the former, and should just end up not having a display. However, the no display case returns a NULL as the display device info, and promptly oopses. As the IVB Q case is rare, and we're anyway moving towards GMD ID, handle the identification requiring subvendor and subdevice as a special case first, instead of unnecessarily growing the intel_display_ids[] array with subvendor and subdevice. [ 5.425298] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 5.426059] #PF: supervisor read access in kernel mode [ 5.426810] #PF: error_code(0x0000) - not-present page [ 5.427570] PGD 0 P4D 0 [ 5.428285] Oops: 0000 [#1] PREEMPT SMP PTI [ 5.429035] CPU: 0 PID: 137 Comm: (udev-worker) Not tainted 6.4.0-1-amd64 #1 Debian 6.4.4-1 [ 5.429759] Hardware name: HP HP Z220 SFF Workstation/HP Z220 SFF Workstation, BIOS 4.19-218-gb184e6e0a1 02/02/2023 [ 5.430485] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.431338] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.432920] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.433707] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.434494] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.435277] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.436055] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.436867] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.437646] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.438434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.439218] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 [ 5.440009] Call Trace: [ 5.440824] <TASK> [ 5.441611] ? __die+0x23/0x70 [ 5.442394] ? page_fault_oops+0x17d/0x4c0 [ 5.443173] ? exc_page_fault+0x7f/0x180 [ 5.443949] ? asm_exc_page_fault+0x26/0x30 [ 5.444756] ? intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.445652] ? intel_device_info_driver_create+0xea/0x120 [i915] [ 5.446545] i915_driver_probe+0x7f/0xb60 [i915] [ 5.447431] ? drm_privacy_screen_get+0x15c/0x1a0 [drm] [ 5.448240] local_pci_probe+0x45/0xa0 [ 5.449013] pci_device_probe+0xc7/0x240 [ 5.449748] really_probe+0x19e/0x3e0 [ 5.450464] ? __pfx___driver_attach+0x10/0x10 [ 5.451172] __driver_probe_device+0x78/0x160 [ 5.451870] driver_probe_device+0x1f/0x90 [ 5.452601] __driver_attach+0xd2/0x1c0 [ 5.453293] bus_for_each_dev+0x88/0xd0 [ 5.453989] bus_add_driver+0x116/0x220 [ 5.454672] driver_register+0x59/0x100 [ 5.455336] i915_init+0x25/0xc0 [i915] [ 5.456104] ? __pfx_i915_init+0x10/0x10 [i915] [ 5.456882] do_one_initcall+0x5d/0x240 [ 5.457511] do_init_module+0x60/0x250 [ 5.458126] __do_sys_finit_module+0xac/0x120 [ 5.458721] do_syscall_64+0x60/0xc0 [ 5.459314] ? syscall_exit_to_user_mode+0x1b/0x40 [ 5.459897] ? do_syscall_64+0x6c/0xc0 [ 5.460510] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 5.461082] RIP: 0033:0x7febd20b0eb9 [ 5.461648] Code: 08 89 e8 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 2f 1f 0d 00 f7 d8 64 89 01 48 [ 5.462905] RSP: 002b:00007fffabb1ba78 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 5.463554] RAX: ffffffffffffffda RBX: 0000561e6304f410 RCX: 00007febd20b0eb9 [ 5.464201] RDX: 0000000000000000 RSI: 00007febd2244f0d RDI: 0000000000000015 [ 5.464869] RBP: 00007febd2244f0d R08: 0000000000000000 R09: 000000000000000a [ 5.465512] R10: 0000000000000015 R11: 0000000000000246 R12: 0000000000020000 [ 5.466124] R13: 0000000000000000 R14: 0000561e63032b60 R15: 000000000000000a [ 5.466700] </TASK> [ 5.467271] Modules linked in: i915(+) drm_buddy video crc32_pclmul sr_mod hid_generic wmi crc32c_intel i2c_algo_bit sd_mod cdrom drm_display_helper cec usbhid rc_core ghash_clmulni_intel hid sha512_ssse3 ttm sha512_generic xhci_pci ehci_pci xhci_hcd ehci_hcd nvme ahci drm_kms_helper nvme_core libahci t10_pi libata psmouse aesni_intel scsi_mod crypto_simd i2c_i801 scsi_common crc64_rocksoft_generic cryptd i2c_smbus drm lpc_ich crc64_rocksoft crc_t10dif e1000e usbcore crct10dif_generic usb_common crct10dif_pclmul crc64 crct10dif_common button [ 5.469750] CR2: 0000000000000000 [ 5.470364] ---[ end trace 0000000000000000 ]--- [ 5.470971] RIP: 0010:intel_device_info_driver_create+0xf1/0x120 [i915] [ 5.471699] Code: 48 8b 97 80 1b 00 00 89 8f c0 1b 00 00 48 89 b7 b0 1b 00 00 48 89 97 b8 1b 00 00 0f b7 fd e8 76 e8 14 00 48 89 83 50 1b 00 00 <48> 8b 08 48 89 8b c4 1b 00 00 48 8b 48 08 48 89 8b cc 1b 00 00 8b [ 5.473034] RSP: 0018:ffffb8254044fb98 EFLAGS: 00010206 [ 5.473698] RAX: 0000000000000000 RBX: ffff923076e80000 RCX: 0000000000000000 [ 5.474371] RDX: 0000000000000260 RSI: 0000000100001000 RDI: 000000000000016a [ 5.475045] RBP: 000000000000016a R08: ffffb8254044fb00 R09: 0000000000000000 [ 5.475725] R10: ffff922d02761de8 R11: 00657361656c6572 R12: ffffffffc0e5d140 [ 5.476405] R13: ffff922d00b720d0 R14: 0000000076e80000 R15: ffff923078c0cae8 [ 5.477124] FS: 00007febd19a18c0(0000) GS:ffff92307c000000(0000) knlGS:0000000000000000 [ 5.477811] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.478499] CR2: 0000000000000000 CR3: 000000010256e002 CR4: 00000000001706f0 Fixes: 69d43981 ("drm/i915/display: Make display responsible for probing its own IP") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8991 Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
Luca Coelho <luciano.coelho@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Jani Nikula authored
Commit 3f9ffce5 ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") started using -1 as the value for unset panel_type. It gets initialized in intel_panel_init_alloc(), but the SDVO code never calls it. Call intel_panel_init_alloc() to initialize the panel, including the panel_type. Reported-by:
Tomi Leppänen <tomi@tomin.site> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8896 Fixes: 3f9ffce5 ("drm/i915: Do panel VBT init early if the VBT declares an explicit panel type") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: <stable@vger.kernel.org> # v6.1+ Reviewed-by:
Uma Shankar <uma.shankar@intel.com> Tested-by:
-
Vinay Belgaumkar authored
This should be done before the soft min/max frequencies are restored. When we disable the "Ignore efficient frequency" flag, GuC does not actually bring the requested freq down to RPn. Specifically, this scenario- - ignore efficient freq set to true - reduce min to RPn (from efficient) - suspend - resume (includes GuC load, restore soft min/max, restore efficient freq) - validate min freq has been resored to RPn This will fail if we didn't first restore(disable, in this case) efficient freq flag before setting the soft min frequency. v2: Bring the min freq down to RPn when we disable efficient freq (Rodrigo) Also made the change to set the min softlimit to RPn at init. Otherwise, we were storing RPe there. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8736 Fixes: 55f9720d ("drm/i915/guc/slpc: Provide sysfs for efficient freq") Fixes: 95ccf312 ("drm/i915/guc/slpc: Allow SLPC to use efficient frequency") Signed-off-by:
Vinay Belgaumkar <vinay.belgaumkar@intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230726010044.3280402-1-vinay.belgaumkar@intel.com (cherry picked from commit 28e67111) Signed-off-by:
-
Luca Ceresoli authored
Commit 03e909ac ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") added support for this panel model, but the timings it implements are very different from what the datasheet describes. I checked both the G121EAN01.0 datasheet from [0] and the G121EAN01.4 one from [1] and they all have the same timings: for example the LVDS clock typical value is 74.4 MHz, not 66.7 MHz as implemented. Replace the timings with the ones from the documentation. These timings have been tested and the clock frequencies verified with an oscilloscope to ensure they are correct. Also use struct display_timing instead of struct drm_display_mode in order to also specify the minimum and maximum values. [0] https://embedded.avnet.com/product/g121ean01-0/ [1] https://embedded.avnet.com/product/g121ean01-4/ Fixes: 03e909ac ("drm/panel: simple: Add support for AUO G121EAN01.4 panel") Signed-off-by:
Luca Ceresoli <luca.ceresoli@bootlin.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
David Heidelberg authored
Use the dev_err_probe() helper to simplify error handling during probe. This also handle scenario, when EDEFER is returned and useless error is printed. Fixes error: panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517 Signed-off-by:
David Heidelberg <david@ixit.cz> Reviewed-by:
-
- 13 Aug, 2023 9 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Clear errno before calling getline() - Fix a modpost warning for ARCH=alpha * tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: alpha: remove __init annotation from exported page_is_ram() scripts/kallsyms: Fix build failure by setting errno before calling getline()
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Hans de Goede: - lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4 on some Thinkbook models, fix this - A set of small fixes for mlx-platform - Other small fixes and hw-id additions * tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type platform: mellanox: Change register offset addresses platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask platform: mellanox: mlx-platform: Fix signals polarity and latch mask platform: mellanox: Fix order in exit flow platform/x86: ISST: Reduce noise for missing numa information in logs platform/x86: msi-ec: Fix the build ACPI: scan: Create platform device for CS35L56 platform/x86/amd/pmf: Fix unsigned comparison with less than zero
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Eleven small fixes, ten in drivers. Of the two fixes marked core, one is in the raid helper class (used by some raid device drivers) and the other one is the /proc/scsi/scsi parsing fix for potential reads beyond the end of the buffer" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedf: Fix firmware halt over suspend and resume scsi: qedi: Fix firmware halt over suspend and resume scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock scsi: lpfc: Remove reftag check in DIF paths scsi: ufs: renesas: Fix private allocation scsi: snic: Fix possible memory leak if device_add() fails scsi: core: Fix possible memory leak if device_add() fails scsi: core: Fix legacy /proc parsing buffer overflow scsi: 53c700: Check that command slot is not NULL scsi: fnic: Replace return codes in fnic_clean_pending_aborts() scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
-
Hans de Goede authored
The lenovo-ymc driver is causing the keyboard + touchpad to stop working on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9. The problem is that there are YMC WMI GUID methods in the ACPI tables of these laptops, despite them not being Yogas and lenovo-ymc loading causes libinput to see a SW_TABLET_MODE switch with state 1. This in turn causes libinput to ignore events from the builtin keyboard and touchpad, since it filters those out for a Yoga in tablet mode. Similar issues with false-positive SW_TABLET_MODE=1 reporting have been seen with the intel-hid driver. Copy the intel-hid driver approach to fix this and only bind to the WMI device on machines where the DMI chassis-type indicates the machine is a convertible. Add a 'force' module parameter to allow overriding the chassis-type check so that users can easily test if the YMC interface works on models which report an unexpected chassis-type. Fixes: e82882cd ("platform/x86: Add driver for Yoga Tablet Mode switch") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373 Cc: André Apitzsch <git@apitzsch.eu> Cc: stable@vger.kernel.org Tested-by:
Andrew Kallmeyer <kallmeyeras@gmail.com> Tested-by:
Gergő Köteles <soyer@irl.hu> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com
-
Vadim Pasternak authored
Move debug register offsets to different location due to hardware changes. Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Reviewed-by:
Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.comSigned-off-by:
-
Vadim Pasternak authored
Use kernel_power_off() instead of kernel_halt() to pass through machine_power_off() -> pm_power_off(), otherwise axillary power does not go off. Change "power down" bitmask. Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by:
-
Vadim Pasternak authored
Change polarity of chassis health and power signals and fix latch reset mask for L1 switch. Fixes: dd635e33 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by:
-
Vadim Pasternak authored
Fix exit flow order: call mlxplat_post_exit() after mlxplat_i2c_main_exit() in order to unregister main i2c driver before to "mlxplat" driver. Fixes: 0170f616 ("platform: mellanox: Split initialization procedure") Signed-off-by:
-
- 12 Aug, 2023 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "More fixes, some of them going back to older releases and there are fixes for hangs in stress tests regarding space caching: - fixes and progress tracking for hangs in free space caching, found by test generic/475 - writeback fixes, write pages in integrity mode and skip writing pages that have been written meanwhile - properly clear end of extent range after an error - relocation fixes: - fix race betwen qgroup tree creation and relocation - detect and report invalid reloc roots" * tag 'for-6.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: set cache_block_group_error if we find an error btrfs: reject invalid reloc tree root keys with stack dump btrfs: exit gracefully if reloc roots don't match btrfs: avoid race between qgroup tree creation and relocation btrfs: properly clear end of the unreserved range in cow_file_range btrfs: don't wait for writeback on clean pages in extent_write_cache_pages btrfs: don't stop integrity writeback too early btrfs: wait for actual caching progress during allocation -
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linuxLinus Torvalds authored
Pull gpio fixes from Bartosz Golaszewski: - mark virtual chips exposed by gpio-sim as ones that can sleep (callbacks must not be called from interrupt context) - fix an off-by-one error in gpio-ws16c48 * tag 'gpio-fixes-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ws16c48: Fix off-by-one error in WS16C48 resource region extent gpio: sim: mark the GPIO chip as a one that can sleep
-
Mateusz Guzik authored
The only remaining consumer is new_inode, where it showed up in 2001 as commit c37fa164 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1] with a changelog which does not mention it. Since then the line got only touched up to keep compiling. While it may have been of benefit back in the day, it is guaranteed to at best not get in the way in the multicore setting -- as the code performs *a lot* of work between the prefetch and actual lock acquire, any contention means the cacheline is already invalid by the time the routine calls spin_lock(). It adds spurious traffic, for short. On top of it prefetch is notoriously tricky to use for single-threaded purposes, making it questionable from the get go. As such, remove it. I admit upfront I did not see value in benchmarking this change, but I can do it if that is deemed appropriate. Removal from new_inode and of the entire thing are in the same patch as requested by Linus, so whatever weird looks can be directed at that guy. Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1] Signed-off-by:
Mateusz Guzik <mjguzik@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char / misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 6.5-rc6 that resolve some reported issues. Included in here are: - bunch of iio driver fixes for reported problems - interconnect driver fixes - counter driver build fix - cardreader driver fixes - binder driver fixes - other tiny driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) misc: tps6594-esm: Disable ESM for rev 1 PMIC misc: rtsx: judge ASPM Mode to set PETXCFG Reg binder: fix memory leak in binder_init() iio: cros_ec: Fix the allocation size for cros_ec_command tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure iio: imu: lsm6dsx: Fix mount matrix retrieval iio: adc: meson: fix core clock enable/disable moment iio: core: Prevent invalid memory access when there is no parent iio: frequency: admv1013: propagate errors from regulator_get_voltage() counter: Fix menuconfig "Counter support" submenu entries disappearance dt-bindings: iio: adi,ad74115: remove ref from -nanoamp iio: adc: ina2xx: avoid NULL pointer dereference on OF device match iio: light: bu27008: Fix intensity data type iio: light: bu27008: Fix scale format iio: light: bu27034: Fix scale format iio: adc: ad7192: Fix ac excitation feature interconnect: qcom: sa8775p: add enable_mask for bcm nodes interconnect: qcom: sm8550: add enable_mask for bcm nodes interconnect: qcom: sm8450: add enable_mask for bcm nodes interconnect: qcom: Add support for mask-based BCMs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for reported problems. Included in here are: - thunderbolt driver memory leak fix - thunderbolt display flicker fix - usb dwc3 driver fix - usb gadget uvc disconnect crash fix - usb typec Kconfig build dependency fix - usb typec small fixes - usb-con-gpio bugfix - usb-storage old driver bugfix All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request() usb: dwc3: Properly handle processing of pending events usb-storage: alauda: Fix uninit-value in alauda_check_media() usb: common: usb-conn-gpio: Prevent bailing out if initial role is none USB: Gadget: core: Help prevent panic during UVC unconfigure usb: typec: mux: intel: Add dependency on USB_COMMON usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe() usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment usb: typec: tcpm: Fix response to vsafe0V event thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Do not parse the confidential computing blob on non-AMD hardware as it leads to an EFI config table ending up unmapped - Use the correct segment selector in the 32-bit version of getcpu() in the vDSO - Make sure vDSO and VVAR regions are placed in the 47-bit VA range even on 5-level paging systems - Add models 0x90-0x91 to the range of AMD Zenbleed-affected CPUs * tag 'x86_urgent_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Enable Zenbleed fix for AMD Custom APU 0405 x86/mm: Fix VDSO and VVAR placement on 5-level paging machines x86/linkage: Fix typo of BUILD_VDSO in asm/linkage.h x86/vdso: Choose the right GDT_ENTRY_CPUNODE for 32-bit getcpu() on 64-bit kernel x86/sev: Do not try to parse for the CC blob on non-AMD hardware
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mitigation fixes from Borislav Petkov: "The first set of fallout fixes after the embargo madness. There will be another set next week too. - A first series of cleanups/unifications and documentation improvements to the SRSO and GDS mitigations code which got postponed to after the embargo date - Fix the SRSO aliasing addresses assertion so that the LLVM linker can parse it too" * tag 'x86_bugs_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: driver core: cpu: Fix the fallback cpu_show_gds() name x86: Move gds_ucode_mitigated() declaration to header x86/speculation: Add cpu_show_gds() prototype driver core: cpu: Make cpu_show_not_affected() static x86/srso: Fix build breakage with the LLVM linker Documentation/srso: Document IBPB aspect and fix formatting driver core: cpu: Unify redundant silly stubs Documentation/hw-vuln: Unify filename specification in index -
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmddLinus Torvalds authored
Pull tpm irq fixes from Jarkko Sakkinen: "These change the probing and enabling of interrupts advertised by the platform firmware (i.e. ACPI, Device Tree) to be an opt-in for tpm_tis, which can be set from the kernel command-line. Note that the opt-in change is only for the PC MMIO tpm_tis module. It does not affect other similar drivers using IRQs, like tpm_tis_spi and synquacer" * tag 'tpmdd-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm_tis: Opt-in interrupts tpm: tpm_tis: Fix UPX-i11 DMI_MATCH condition
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "A few small bugs: - Fix longstanding mlx5 bug where ODP would fail with certain MR alignments - cancel work to prevent a hfi1 UAF - MAINTAINERS update - UAF, missing mutex_init and an error unwind bug in bnxt_re" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/bnxt_re: Initialize dpi_tbl_lock mutex RDMA/bnxt_re: Fix error handling in probe failure path RDMA/bnxt_re: Properly order ib_device_unalloc() to avoid UAF MAINTAINERS: Remove maintainer of HiSilicon RoCE IB/hfi1: Fix possible panic during hotplug remove RDMA/umem: Set iova in ODP flow -
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefsLinus Torvalds authored
Pull zonefs fix from Damien Le Moal: - The switch to using iomap for executing a direct synchronous write to sequential files using a zone append BIO overlooked cases where the BIO built by iomap is too large and needs splitting, which is not allowed with zone append. Fix this by using regular write commands instead. The use of zone append commands will be reintroduced later with proper support from iomap. * tag 'zonefs-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix synchronous direct writes to sequential files
-
