- 28 Feb, 2018 40 commits
-
-
Huang Rui authored
commit 400b6afb upstream. MMHUB power gating still has issue, and doesn't work on raven at current. So disable it for the moment. Signed-off-by:
Huang Rui <ray.huang@amd.com> Acked-by:
Hawking Zhang <Hawking.Zhang@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit b8ff1802 upstream. During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489da ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.11+ Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180219113543.8010-1-chris@chris-wilson.co.ukSigned-off-by:
-
Daniel Vetter authored
commit 745fd50f upstream. In the past the ast driver relied upon the fbdev emulation helpers to call ->load_lut at boot-up. But since commit b8e2b019 Author: Peter Rosin <peda@axentia.se> Date: Tue Jul 4 12:36:57 2017 +0200 drm/fb-helper: factor out pseudo-palette that's cleaned up and drivers are expected to boot into a consistent lut state. This patch fixes that. Fixes: b8e2b019 ("drm/fb-helper: factor out pseudo-palette") Cc: Peter Rosin <peda@axenita.se> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <stable@vger.kernel.org> # v4.14+ References: https://bugzilla.kernel.org/show_bug.cgi?id=198123Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180131110450.22153-1-daniel.vetter@ffwll.chSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 17aa31f1 upstream. This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3 ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: <stable@vger.kernel.org> # v3.19+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Jack Pham authored
commit 675272d0 upstream. In commit 2bfa0719 ("usb: gadget: function: f_fs: pass companion descriptor along") there is a pointer arithmetic bug where the comp_desc is obtained as follows: comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + USB_DT_ENDPOINT_SIZE); Since ds is a pointer to usb_endpoint_descriptor, adding 7 to it ends up going out of bounds (7 * sizeof(struct usb_endpoint_descriptor), which is actually 7*9 bytes) past the SS descriptor. As a result the maxburst value will be read incorrectly, and the UDC driver will also get a garbage comp_desc (assuming it uses it). Since Felipe wrote, "Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though", let's finally do it. This allows the other usb_ep fields to be properly populated, such as maxpacket and mult. It also eliminates the awkward speed-based descriptor lookup since config_ep_by_speed() does that already using the ones found in struct usb_function. Fixes: 2bfa0719 ("usb: gadget: function: f_fs: pass companion descriptor along") Cc: stable@vger.kernel.org Signed-off-by:
Jack Pham <jackp@codeaurora.org> Signed-off-by:
-
Jack Pham authored
commit 6cf439e0 upstream. During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by:
Mayank Rana <mrana@codeaurora.org> Signed-off-by:
-
Bin Liu authored
commit 44eb5e12 upstream. This reverts commit dbac5d07. commit dbac5d07 ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212 ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: stable@vger.kernel.org # v4.7+ Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Karsten Koop authored
commit 52ad2bd8 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by:
Karsten Koop <kkoop@ld-didactic.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Thinh Nguyen authored
commit f035d139 upstream. DWC3 tracks TRB counter for each ep0 direction separately. In control read transfer completion handler, the driver needs to reset the TRB enqueue counter for ep0 IN direction. Currently the driver only resets the TRB counter for control OUT endpoint. Check for the data direction and properly reset the TRB counter from correct control endpoint. Cc: stable@vger.kernel.org Fixes: c2da2ff0 ("usb: dwc3: ep0: don't use ep0in for transfers") Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Thinh Nguyen authored
commit 61800263 upstream. There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@vger.kernel.org Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by:
-
Peter Chen authored
commit 02a10f06 upstream. commit a8c06e40 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e40 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by:
Peter Chen <peter.chen@nxp.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Kai-Heng Feng authored
commit 06998a75 upstream. Similar to commit e10aec65 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by:
-
Jack Stocker authored
commit 7a1646d9 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by:
Jack Stocker <jackstocker.93@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Will Deacon authored
commit be68a8aa upstream. Our field definitions for CTR_EL0 suffer from a number of problems: - The IDC and DIC fields are missing, which causes us to enable CTR trapping on CPUs with either of these returning non-zero values. - The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as FTR_HIGHER_SAFE so that applications can use it to avoid false sharing. - [nit] A RES1 field is described as "RAO" This patch updates the CTR_EL0 field definitions to fix these issues. Cc: <stable@vger.kernel.org> Cc: Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Michael Weiser authored
commit 5ee39a71 upstream. aarch64 unhandled signal kernel messages are very verbose, suggesting them to be more of a debugging aid: sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046, in sigsegv[400000+71000] CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3 Hardware name: linux,dummy-virt (DT) pstate: 60000000 (nZCv daif -PAN -UAO) pc : 0x4003f4 lr : 0x4006bc sp : 0000fffffe94a060 x29: 0000fffffe94a070 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 00000000004001b0 x23: 0000000000486ac8 x22: 00000000004001c8 x21: 0000000000000000 x20: 0000000000400be8 x19: 0000000000400b30 x18: 0000000000484728 x17: 000000000865ffc8 x16: 000000000000270f x15: 00000000000000b0 x14: 0000000000000002 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000000 x10: 0008000020008008 x9 : 000000000000000f x8 : ffffffffffffffff x7 : 0004000000000000 x6 : ffffffffffffffff x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000004003e4 x2 : 0000fffffe94a1e8 x1 : 000000000000000a x0 : 0000000000000000 Disable them by default, so they can be enabled using /proc/sys/debug/exception-trace. Cc: <stable@vger.kernel.org> Signed-off-by:
Michael Weiser <michael.weiser@gmx.de> Signed-off-by:
-
Michael Weiser authored
commit 1962682d upstream. Stop printing a (ratelimited) kernel message for each instance of an unimplemented syscall being called. Userland making an unimplemented syscall is not necessarily misbehaviour and to be expected with a current userland running on an older kernel. Also, the current message looks scary to users but does not actually indicate a real problem nor help them narrow down the cause. Just rely on sys_ni_syscall() to return -ENOSYS. Cc: <stable@vger.kernel.org> Acked-by:
-
AMAN DEEP authored
usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() commit 46408ea5 upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by:
Aman Deep <aman.deep@samsung.com> Signed-off-by:
Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by:
-
Shigeru Yoshida authored
commit b2685bda upstream. Running io_watchdog_func() while ohci_urb_enqueue() is running can cause a race condition where ohci->prev_frame_no is corrupted and the watchdog can mis-detect following error: ohci-platform 664a0800.usb: frame counter not updating; disabled ohci-platform 664a0800.usb: HC died; cleaning up Specifically, following scenario causes a race condition: 1. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 2. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 3. ohci_urb_enqueue() sets ohci->prev_frame_no to a frame number read by ohci_frame_no(ohci) 4. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 5. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section 6. Later, ohci_urb_enqueue() is called 7. ohci_urb_enqueue() calls spin_lock_irqsave(&ohci->lock, flags) and enters the critical section 8. The timer scheduled on step 4 expires and io_watchdog_func() runs 9. io_watchdog_func() calls spin_lock_irqsave(&ohci->lock, flags) and waits on it because ohci_urb_enqueue() is already in the critical section on step 7 10. ohci_urb_enqueue() calls timer_pending(&ohci->io_watchdog) and it returns false 11. ohci_urb_enqueue() sets ohci->prev_frame_no to new frame number read by ohci_frame_no(ohci) because the frame number proceeded between step 3 and 6 12. ohci_urb_enqueue() schedules io_watchdog_func() with mod_timer() 13. ohci_urb_enqueue() calls spin_unlock_irqrestore(&ohci->lock, flags) and exits the critical section, then wake up io_watchdog_func() which is waiting on step 9 14. io_watchdog_func() enters the critical section 15. io_watchdog_func() calls ohci_frame_no(ohci) and set frame_no variable to the frame number 16. io_watchdog_func() compares frame_no and ohci->prev_frame_no On step 16, because this calling of io_watchdog_func() is scheduled on step 4, the frame number set in ohci->prev_frame_no is expected to the number set on step 3. However, ohci->prev_frame_no is overwritten on step 11. Because step 16 is executed soon after step 11, the frame number might not proceed, so ohci->prev_frame_no must equals to frame_no. To address above scenario, this patch introduces a special sentinel value IO_WATCHDOG_OFF and set this value to ohci->prev_frame_no when the watchdog is not pending or running. When ohci_urb_enqueue() schedules the watchdog (step 4 and 12 above), it compares ohci->prev_frame_no to IO_WATCHDOG_OFF so that ohci->prev_frame_no is not overwritten while io_watchdog_func() is running. Signed-off-by:
Shigeru Yoshida <Shigeru.Yoshida@windriver.com> Signed-off-by:
Haiqing Bai <Haiqing.Bai@windriver.com> Acked-by:
-
Casey Leedom authored
commit 7dcf688d upstream. We've run into a problem where our device is attached to a Virtual Machine and the use of the new pci_set_vpd_size() API doesn't help. The VM kernel has been informed that the accesses are okay, but all of the actual VPD Capability Accesses are trapped down into the KVM Hypervisor where it goes ahead and imposes the silent denials. The right idea is to follow the kernel.org commit 1c7de2b4 ("PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored to establish a PCI Quirk for our T3-based adapters. This commit extends that PCI Quirk to cover Chelsio T4 devices and later. The advantage of this approach is that the VPD Size gets set early in the Base OS/Hypervisor Boot and doesn't require that the cxgb4 driver even be available in the Base OS/Hypervisor. Thus PF4 can be exported to a Virtual Machine and everything should work. Fixes: 67e65879 ("cxgb4: Set VPD size so we can read both VPD structures") Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
Casey Leedom <leedom@chelsio.com> Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Matt Redfearn authored
commit 285cb4f6 upstream. Commit 7778c4b2 ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") removed the read of the hardware mask register when handling shared interrupts, instead using the driver's shadow pcpu_masks entry as the effective mask. Unfortunately this did not take account of the write to pcpu_masks during gic_shared_irq_domain_map, which effectively unmasks the interrupt early. If an interrupt is asserted, gic_handle_shared_int decodes and processes the interrupt even though it has not yet been unmasked via gic_unmask_irq, which also sets the appropriate bit in pcpu_masks. On the MIPS Boston board, when a console command line of "console=ttyS0,115200n8r" is passed, the modem status IRQ is enabled in the UART, which is immediately raised to the GIC. The interrupt has been mapped, but no handler has yet been registered, nor is it expected to be unmasked. However, the write to pcpu_masks in gic_shared_irq_domain_map has effectively unmasked it, resulting in endless reports of: [ 5.058454] irq 13, desc: ffffffff80a7ad80, depth: 1, count: 0, unhandled: 0 [ 5.062057] ->handle_irq(): ffffffff801b1838, [ 5.062175] handle_bad_irq+0x0/0x2c0 Where IRQ 13 is the UART interrupt. To fix this, just remove the write to pcpu_masks in gic_shared_irq_domain_map. The existing write in gic_unmask_irq is the correct place for what is now the effective unmasking. Cc: stable@vger.kernel.org Fixes: 7778c4b2 ("irqchip: mips-gic: Use pcpu_masks to avoid reading GIC_SH_MASK*") Signed-off-by:
Matt Redfearn <matt.redfearn@mips.com> Reviewed-by:
Paul Burton <paul.burton@mips.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Shanker Donthineni authored
commit 21ec30c0 upstream. A DMB instruction can be used to ensure the relative order of only memory accesses before and after the barrier. Since writes to system registers are not memory operations, barrier DMB is not sufficient for observability of memory accesses that occur before ICC_SGI1R_EL1 writes. A DSB instruction ensures that no instructions that appear in program order after the DSB instruction, can execute until the DSB instruction has completed. Cc: stable@vger.kernel.org Acked-by: Will Deacon <will.deacon@arm.com>, Signed-off-by:
Shanker Donthineni <shankerd@codeaurora.org> Signed-off-by:
-
Huang Ying authored
commit 7ba71669 upstream. It was reported by Sergey Senozhatsky that if THP (Transparent Huge Page) and frontswap (via zswap) are both enabled, when memory goes low so that swap is triggered, segfault and memory corruption will occur in random user space applications as follow, kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000] #0 0x00007fc08889ae0d _int_malloc (libc.so.6) #1 0x00007fc08889c2f3 malloc (libc.so.6) #2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt) #3 0x0000560e6005e75c n/a (urxvt) #4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt) #5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt) #6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt) #7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt) #8 0x0000560e6005cb55 ev_run (urxvt) #9 0x0000560e6003b9b9 main (urxvt) #10 0x00007fc08883af4a __libc_start_main (libc.so.6) #11 0x0000560e6003f9da _start (urxvt) After bisection, it was found the first bad commit is bd4c82c2 ("mm, THP, swap: delay splitting THP after swapped out"). The root cause is as follows: When the pages are written to swap device during swapping out in swap_writepage(), zswap (fontswap) is tried to compress the pages to improve performance. But zswap (frontswap) will treat THP as a normal page, so only the head page is saved. After swapping in, tail pages will not be restored to their original contents, causing memory corruption in the applications. This is fixed by refusing to save page in the frontswap store functions if the page is a THP. So that the THP will be swapped out to swap device. Another choice is to split THP if frontswap is enabled. But it is found that the frontswap enabling isn't flexible. For example, if CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if zswap itself isn't enabled. Frontswap has multiple backends, to make it easy for one backend to enable THP support, the THP checking is put in backend frontswap store functions instead of the general interfaces. Link: http://lkml.kernel.org/r/20180209084947.22749-1-ying.huang@intel.com Fixes: bd4c82c2 ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by:
"Huang, Ying" <ying.huang@intel.com> Reported-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Arnd Bergmann authored
commit 85c615eb upstream. GCC-8 shows a warning for the x86 oprofile code that copies per-CPU data from CPU 0 to all other CPUs, which when building a non-SMP kernel turns into a memcpy() with identical source and destination pointers: arch/x86/oprofile/nmi_int.c: In function 'mux_clone': arch/x86/oprofile/nmi_int.c:285:2: error: 'memcpy' source argument is the same as destination [-Werror=restrict] memcpy(per_cpu(cpu_msrs, cpu).multiplex, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ per_cpu(cpu_msrs, 0).multiplex, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(struct op_msr) * model->num_virt_counters); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/oprofile/nmi_int.c: In function 'nmi_setup': arch/x86/oprofile/nmi_int.c:466:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] arch/x86/oprofile/nmi_int.c:470:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] I have analyzed a number of such warnings now: some are valid and the GCC warning is welcome. Others turned out to be false-positives, and GCC was changed to not warn about those any more. This is a corner case that is a false-positive but the GCC developers feel it's better to keep warning about it. In this case, it seems best to work around it by telling GCC a little more clearly that this code path is never hit with an IS_ENABLED() configuration check. Cc:stable as we also want old kernels to build cleanly with GCC-8. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Jessica Yu <jeyu@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Sebor <msebor@gcc.gnu.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: oprofile-list@lists.sf.net Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20180220205826.2008875-1-arnd@arndb.de Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=84095Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 101110f6 upstream. Build testing with LTO found a couple of files that get compiled differently depending on whether asm/byteorder.h gets included early enough or not. In particular, include/asm-generic/qrwlock_types.h is affected by this, but there are probably others as well. The symptom is a series of LTO link time warnings, including these: net/netlabel/netlabel_unlabeled.h:223: error: type of 'netlbl_unlhsh_add' does not match original declaration [-Werror=lto-type-mismatch] int netlbl_unlhsh_add(struct net *net, net/netlabel/netlabel_unlabeled.c:377: note: 'netlbl_unlhsh_add' was previously declared here include/net/ipv6.h:360: error: type of 'ipv6_renew_options_kern' does not match original declaration [-Werror=lto-type-mismatch] ipv6_renew_options_kern(struct sock *sk, net/ipv6/exthdrs.c:1162: note: 'ipv6_renew_options_kern' was previously declared here net/core/dev.c:761: note: 'dev_get_by_name_rcu' was previously declared here struct net_device *dev_get_by_name_rcu(struct net *net, const char *name) net/core/dev.c:761: note: code may be misoptimized unless -fno-strict-aliasing is used drivers/gpu/drm/i915/i915_drv.h:3377: error: type of 'i915_gem_object_set_to_wc_domain' does not match original declaration [-Werror=lto-type-mismatch] i915_gem_object_set_to_wc_domain(struct drm_i915_gem_object *obj, bool write); drivers/gpu/drm/i915/i915_gem.c:3639: note: 'i915_gem_object_set_to_wc_domain' was previously declared here include/linux/debugfs.h:92:9: error: type of 'debugfs_attr_read' does not match original declaration [-Werror=lto-type-mismatch] ssize_t debugfs_attr_read(struct file *file, char __user *buf, fs/debugfs/file.c:318: note: 'debugfs_attr_read' was previously declared here include/linux/rwlock_api_smp.h:30: error: type of '_raw_read_unlock' does not match original declaration [-Werror=lto-type-mismatch] void __lockfunc _raw_read_unlock(rwlock_t *lock) __releases(lock); kernel/locking/spinlock.c:246:26: note: '_raw_read_unlock' was previously declared here include/linux/fs.h:3308:5: error: type of 'simple_attr_open' does not match original declaration [-Werror=lto-type-mismatch] int simple_attr_open(struct inode *inode, struct file *file, fs/libfs.c:795: note: 'simple_attr_open' was previously declared here All of the above are caused by include/asm-generic/qrwlock_types.h failing to include asm/byteorder.h after commit e0d02285 ("locking/qrwlock: Use 'struct qrwlock' instead of 'struct __qrwlock'") in linux-4.15. Similar bugs may or may not exist in older kernels as well, but there is no easy way to test those with link-time optimizations, and kernels before 4.14 are harder to fix because they don't have Babu's patch series We had similar issues with CONFIG_ symbols in the past and ended up always including the configuration headers though linux/kconfig.h. This works around the issue through that same file, defining either __BIG_ENDIAN or __LITTLE_ENDIAN depending on CONFIG_CPU_BIG_ENDIAN, which is now always set on all architectures since commit 4c97a0c8 ("arch: define CPU_BIG_ENDIAN for all fixed big endian archs"). Link: http://lkml.kernel.org/r/20180202154104.1522809-2-arnd@arndb.deSigned-off-by:
-
Lars-Peter Clausen authored
commit f027e0b3 upstream. The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f ("staging:iio: Add common ADIS library") Reported-by:
Robin Getz <Robin.Getz@analog.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Stefan Windfeldt-Prytz authored
commit 4cd140bd upstream. If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: stable@vger.kernel.org Signed-off-by:
Stefan Windfeldt-Prytz <stefan.windfeldt@axis.com> Signed-off-by:
-
Andreas Klinger authored
commit 511051d5 upstream. Functions for triggered buffer support are needed by this module. If they are not defined accidentally by another driver, there's an error thrown out while linking. Add a select of IIO_BUFFER and IIO_TRIGGERED_BUFFER in the Kconfig file. Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Fixes: a8319593 ("iio: srf08: add triggered buffer support") Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Fabrice Gasnier authored
commit a3b5655e upstream. Error handling in stm32h7_adc_enable routine doesn't unwind enable sequence correctly. ADEN can only be cleared by hardware (e.g. by writing one to ADDIS). It's also better to clear ADRDY just after it's been set by hardware. Fixes: 95e339b6 ("iio: adc: stm32: add support for STM32H7") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
Leon Romanovsky authored
commit 5d4c05c3 upstream. ================================================================== BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs+0x6f2/0x8c0 Read of size 4 at addr ffff88006476a198 by task syzkaller697701/265 CPU: 0 PID: 265 Comm: syzkaller697701 Not tainted 4.15.0+ #90 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ? show_regs_print_info+0x17/0x17 ? lock_contended+0x11a0/0x11a0 print_address_description+0x83/0x3e0 kasan_report+0x18c/0x4b0 ? copy_ah_attr_from_uverbs+0x6f2/0x8c0 ? copy_ah_attr_from_uverbs+0x6f2/0x8c0 ? lookup_get_idr_uobject+0x120/0x200 ? copy_ah_attr_from_uverbs+0x6f2/0x8c0 copy_ah_attr_from_uverbs+0x6f2/0x8c0 ? modify_qp+0xd0e/0x1350 modify_qp+0xd0e/0x1350 ib_uverbs_modify_qp+0xf9/0x170 ? ib_uverbs_query_qp+0xa70/0xa70 ib_uverbs_write+0x7f9/0xef0 ? attach_entity_load_avg+0x8b0/0x8b0 ? ib_uverbs_query_qp+0xa70/0xa70 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? sched_clock_cpu+0x18/0x200 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? _raw_spin_unlock_irq+0x29/0x40 ? time_hardirqs_on+0x27/0x670 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? _raw_spin_unlock_irq+0x29/0x40 ? finish_task_switch+0x1bd/0x7a0 ? finish_task_switch+0x194/0x7a0 ? prandom_u32_state+0xe/0x180 ? rcu_read_unlock+0x80/0x80 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x433c29 RSP: 002b:00007ffcf2be82a8 EFLAGS: 00000217 Allocated by task 62: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc+0x141/0x480 dup_fd+0x101/0xcc0 copy_process.part.62+0x166f/0x4390 _do_fork+0x1cb/0xe90 kernel_thread+0x34/0x40 call_usermodehelper_exec_work+0x112/0x260 process_one_work+0x929/0x1aa0 worker_thread+0x5c6/0x12a0 kthread+0x346/0x510 ret_from_fork+0x3a/0x50 Freed by task 259: kasan_slab_free+0x71/0xc0 kmem_cache_free+0xf3/0x4c0 put_files_struct+0x225/0x2c0 exit_files+0x88/0xc0 do_exit+0x67c/0x1520 do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b The buggy address belongs to the object at ffff88006476a000 which belongs to the cache files_cache of size 832 The buggy address is located 408 bytes inside of 832-byte region [ffff88006476a000, ffff88006476a340) The buggy address belongs to the page: page:ffffea000191da80 count:1 mapcount:0 mapping: (null) index:0x0 compound_mapcount: 0 flags: 0x4000000000008100(slab|head) raw: 4000000000008100 0000000000000000 0000000000000000 0000000100080008 raw: 0000000000000000 0000000100000001 ffff88006bcf7a80 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88006476a080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88006476a100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88006476a180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88006476a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88006476a280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: 44c58487 ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types") Reported-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
commit 1ff5325c upstream. Avoid circular locking dependency by calling to uobj_alloc_commit() outside of xrcd_tree_mutex lock. ====================================================== WARNING: possible circular locking dependency detected 4.15.0+ #87 Not tainted ------------------------------------------------------ syzkaller401056/269 is trying to acquire lock: (&uverbs_dev->xrcd_tree_mutex){+.+.}, at: [<000000006c12d2cd>] uverbs_free_xrcd+0xd2/0x360 but task is already holding lock: (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ucontext->uobjects_lock){+.+.}: __mutex_lock+0x111/0x1720 rdma_alloc_commit_uobject+0x22c/0x600 ib_uverbs_open_xrcd+0x61a/0xdd0 ib_uverbs_write+0x7f9/0xef0 __vfs_write+0x10d/0x700 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 entry_SYSCALL_64_fastpath+0x1e/0x8b -> #0 (&uverbs_dev->xrcd_tree_mutex){+.+.}: lock_acquire+0x19d/0x440 __mutex_lock+0x111/0x1720 uverbs_free_xrcd+0xd2/0x360 remove_commit_idr_uobject+0x6d/0x110 uverbs_cleanup_ucontext+0x2f0/0x730 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120 ib_uverbs_close+0xf2/0x570 __fput+0x2cd/0x8d0 task_work_run+0xec/0x1d0 do_exit+0x6a1/0x1520 do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ucontext->uobjects_lock); lock(&uverbs_dev->xrcd_tree_mutex); lock(&ucontext->uobjects_lock); lock(&uverbs_dev->xrcd_tree_mutex); *** DEADLOCK *** 3 locks held by syzkaller401056/269: #0: (&file->cleanup_mutex){+.+.}, at: [<00000000c9f0c252>] ib_uverbs_close+0xac/0x570 #1: (&ucontext->cleanup_rwsem){++++}, at: [<00000000b6994d49>] uverbs_cleanup_ucontext+0xf6/0x730 #2: (&ucontext->uobjects_lock){+.+.}, at: [<00000000da010f09>] uverbs_cleanup_ucontext+0x168/0x730 stack backtrace: CPU: 0 PID: 269 Comm: syzkaller401056 Not tainted 4.15.0+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ? uverbs_cleanup_ucontext+0x168/0x730 ? console_unlock+0x502/0xbd0 print_circular_bug.isra.24+0x35e/0x396 ? print_circular_bug_header+0x12e/0x12e ? find_usage_backwards+0x30/0x30 ? entry_SYSCALL_64_fastpath+0x1e/0x8b validate_chain.isra.28+0x25d1/0x40c0 ? check_usage+0xb70/0xb70 ? graph_lock+0x160/0x160 ? find_usage_backwards+0x30/0x30 ? cyc2ns_read_end+0x10/0x10 ? print_irqtrace_events+0x280/0x280 ? __lock_acquire+0x93d/0x1630 __lock_acquire+0x93d/0x1630 lock_acquire+0x19d/0x440 ? uverbs_free_xrcd+0xd2/0x360 __mutex_lock+0x111/0x1720 ? uverbs_free_xrcd+0xd2/0x360 ? uverbs_free_xrcd+0xd2/0x360 ? __mutex_lock+0x828/0x1720 ? mutex_lock_io_nested+0x1550/0x1550 ? uverbs_cleanup_ucontext+0x168/0x730 ? __lock_acquire+0x9a9/0x1630 ? mutex_lock_io_nested+0x1550/0x1550 ? uverbs_cleanup_ucontext+0xf6/0x730 ? lock_contended+0x11a0/0x11a0 ? uverbs_free_xrcd+0xd2/0x360 uverbs_free_xrcd+0xd2/0x360 remove_commit_idr_uobject+0x6d/0x110 uverbs_cleanup_ucontext+0x2f0/0x730 ? sched_clock_cpu+0x18/0x200 ? uverbs_close_fd+0x1c0/0x1c0 ib_uverbs_cleanup_ucontext.constprop.3+0x52/0x120 ib_uverbs_close+0xf2/0x570 ? ib_uverbs_remove_one+0xb50/0xb50 ? ib_uverbs_remove_one+0xb50/0xb50 __fput+0x2cd/0x8d0 task_work_run+0xec/0x1d0 do_exit+0x6a1/0x1520 ? fsnotify_first_mark+0x220/0x220 ? exit_notify+0x9f0/0x9f0 ? entry_SYSCALL_64_fastpath+0x5/0x8b ? entry_SYSCALL_64_fastpath+0x5/0x8b ? trace_hardirqs_on_thunk+0x1a/0x1c ? time_hardirqs_on+0x27/0x670 ? time_hardirqs_off+0x27/0x490 ? syscall_return_slowpath+0x6c/0x460 ? entry_SYSCALL_64_fastpath+0x5/0x8b do_group_exit+0xe8/0x380 SyS_exit_group+0x1e/0x20 entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x431ce9 Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd3c7904 ("IB/core: Change idr objects to use the new schema") Reported-by:
-
Leon Romanovsky authored
commit 5c2e1c4f upstream. There is no matching lock for this mutex. Git history suggests this is just a missed remnant from an earlier version of the function before this locking was moved into uverbs_free_xrcd. Originally this lock was protecting the xrcd_table_delete() ===================================== WARNING: bad unlock balance detected! 4.15.0+ #87 Not tainted ------------------------------------- syzkaller223405/269 is trying to release lock (&uverbs_dev->xrcd_tree_mutex) at: [<00000000b8703372>] ib_uverbs_close_xrcd+0x195/0x1f0 but there are no more locks to release! other info that might help us debug this: 1 lock held by syzkaller223405/269: #0: (&uverbs_dev->disassociate_srcu){....}, at: [<000000005af3b960>] ib_uverbs_write+0x265/0xef0 stack backtrace: CPU: 0 PID: 269 Comm: syzkaller223405 Not tainted 4.15.0+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ? ib_uverbs_write+0x265/0xef0 ? console_unlock+0x502/0xbd0 ? ib_uverbs_close_xrcd+0x195/0x1f0 print_unlock_imbalance_bug+0x131/0x160 lock_release+0x59d/0x1100 ? ib_uverbs_close_xrcd+0x195/0x1f0 ? lock_acquire+0x440/0x440 ? lock_acquire+0x440/0x440 __mutex_unlock_slowpath+0x88/0x670 ? wait_for_completion+0x4c0/0x4c0 ? rdma_lookup_get_uobject+0x145/0x2f0 ib_uverbs_close_xrcd+0x195/0x1f0 ? ib_uverbs_open_xrcd+0xdd0/0xdd0 ib_uverbs_write+0x7f9/0xef0 ? cyc2ns_read_end+0x10/0x10 ? ib_uverbs_open_xrcd+0xdd0/0xdd0 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? cyc2ns_read_end+0x10/0x10 ? sched_clock_cpu+0x18/0x200 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? __fget+0x358/0x5d0 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x1e/0x8b RIP: 0033:0x4335c9 Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: fd3c7904 ("IB/core: Change idr objects to use the new schema") Reported-by:
-
Leon Romanovsky authored
commit 3f802b16 upstream. The command number is not bounds checked against the command mask before it is shifted, resulting in an ubsan hit. This does not cause malfunction since the command number is eventually bounds checked, but we can make this ubsan clean by moving the bounds check to before the mask check. ================================================================================ UBSAN: Undefined behaviour in drivers/infiniband/core/uverbs_main.c:647:21 shift exponent 207 is too large for 64-bit type 'long long unsigned int' CPU: 0 PID: 446 Comm: syz-executor3 Not tainted 4.15.0-rc2+ #61 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ? dma_virt_map_sg+0x22c/0x22c ubsan_epilogue+0xe/0x81 __ubsan_handle_shift_out_of_bounds+0x293/0x2f7 ? debug_check_no_locks_freed+0x340/0x340 ? __ubsan_handle_load_invalid_value+0x19b/0x19b ? lock_acquire+0x440/0x440 ? lock_acquire+0x19d/0x440 ? __might_fault+0xf4/0x240 ? ib_uverbs_write+0x68d/0xe20 ib_uverbs_write+0x68d/0xe20 ? __lock_acquire+0xcf7/0x3940 ? uverbs_devnode+0x110/0x110 ? cyc2ns_read_end+0x10/0x10 ? sched_clock_cpu+0x18/0x200 ? sched_clock_cpu+0x18/0x200 __vfs_write+0x10d/0x700 ? uverbs_devnode+0x110/0x110 ? kernel_read+0x170/0x170 ? __fget+0x35b/0x5d0 ? security_file_permission+0x93/0x260 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x448e29 RSP: 002b:00007f033f567c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f033f5686bc RCX: 0000000000448e29 RDX: 0000000000000060 RSI: 0000000020001000 RDI: 0000000000000012 RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000056a0 R14: 00000000006e8740 R15: 0000000000000000 ================================================================================ Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.5 Fixes: 2dbd5186 ("IB/core: IB/core: Allow legacy verbs through extended interfaces") Reported-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
-
Leon Romanovsky authored
commit 6623e3e3 upstream. The race is between lookup_get_idr_uobject and uverbs_idr_remove_uobj -> uverbs_uobject_put. We deliberately do not call sychronize_rcu after the idr_remove in uverbs_idr_remove_uobj for performance reasons, instead we call kfree_rcu() during uverbs_uobject_put. However, this means we can obtain pointers to uobj's that have already been released and must protect against krefing them using kref_get_unless_zero. ================================================================== BUG: KASAN: use-after-free in copy_ah_attr_from_uverbs.isra.2+0x860/0xa00 Read of size 4 at addr ffff88005fda1ac8 by task syz-executor2/441 CPU: 1 PID: 441 Comm: syz-executor2 Not tainted 4.15.0-rc2+ #56 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 Call Trace: dump_stack+0x8d/0xd4 print_address_description+0x73/0x290 kasan_report+0x25c/0x370 ? copy_ah_attr_from_uverbs.isra.2+0x860/0xa00 copy_ah_attr_from_uverbs.isra.2+0x860/0xa00 ? uverbs_try_lock_object+0x68/0xc0 ? modify_qp.isra.7+0xdc4/0x10e0 modify_qp.isra.7+0xdc4/0x10e0 ib_uverbs_modify_qp+0xfe/0x170 ? ib_uverbs_query_qp+0x970/0x970 ? __lock_acquire+0xa11/0x1da0 ib_uverbs_write+0x55a/0xad0 ? ib_uverbs_query_qp+0x970/0x970 ? ib_uverbs_query_qp+0x970/0x970 ? ib_uverbs_open+0x760/0x760 ? futex_wake+0x147/0x410 ? sched_clock_cpu+0x18/0x180 ? check_prev_add+0x1680/0x1680 ? do_futex+0x3b6/0xa30 ? sched_clock_cpu+0x18/0x180 __vfs_write+0xf7/0x5c0 ? ib_uverbs_open+0x760/0x760 ? kernel_read+0x110/0x110 ? lock_acquire+0x370/0x370 ? __fget+0x264/0x3b0 vfs_write+0x18a/0x460 SyS_write+0xc7/0x1a0 ? SyS_read+0x1a0/0x1a0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0x85 RIP: 0033:0x448e29 RSP: 002b:00007f443fee0c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007f443fee16bc RCX: 0000000000448e29 RDX: 0000000000000078 RSI: 00000000209f8000 RDI: 0000000000000012 RBP: 000000000070bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000008e98 R14: 00000000006ebf38 R15: 0000000000000000 Allocated by task 1: kmem_cache_alloc_trace+0x16c/0x2f0 mlx5_alloc_cmd_msg+0x12e/0x670 cmd_exec+0x419/0x1810 mlx5_cmd_exec+0x40/0x70 mlx5_core_mad_ifc+0x187/0x220 mlx5_MAD_IFC+0xd7/0x1b0 mlx5_query_mad_ifc_gids+0x1f3/0x650 mlx5_ib_query_gid+0xa4/0xc0 ib_query_gid+0x152/0x1a0 ib_query_port+0x21e/0x290 mlx5_port_immutable+0x30f/0x490 ib_register_device+0x5dd/0x1130 mlx5_ib_add+0x3e7/0x700 mlx5_add_device+0x124/0x510 mlx5_register_interface+0x11f/0x1c0 mlx5_ib_init+0x56/0x61 do_one_initcall+0xa3/0x250 kernel_init_freeable+0x309/0x3b8 kernel_init+0x14/0x180 ret_from_fork+0x24/0x30 Freed by task 1: kfree+0xeb/0x2f0 mlx5_free_cmd_msg+0xcd/0x140 cmd_exec+0xeba/0x1810 mlx5_cmd_exec+0x40/0x70 mlx5_core_mad_ifc+0x187/0x220 mlx5_MAD_IFC+0xd7/0x1b0 mlx5_query_mad_ifc_gids+0x1f3/0x650 mlx5_ib_query_gid+0xa4/0xc0 ib_query_gid+0x152/0x1a0 ib_query_port+0x21e/0x290 mlx5_port_immutable+0x30f/0x490 ib_register_device+0x5dd/0x1130 mlx5_ib_add+0x3e7/0x700 mlx5_add_device+0x124/0x510 mlx5_register_interface+0x11f/0x1c0 mlx5_ib_init+0x56/0x61 do_one_initcall+0xa3/0x250 kernel_init_freeable+0x309/0x3b8 kernel_init+0x14/0x180 ret_from_fork+0x24/0x30 The buggy address belongs to the object at ffff88005fda1ab0 which belongs to the cache kmalloc-32 of size 32 The buggy address is located 24 bytes inside of 32-byte region [ffff88005fda1ab0, ffff88005fda1ad0) The buggy address belongs to the page: page:00000000d5655c19 count:1 mapcount:0 mapping: (null) index:0xffff88005fda1fc0 flags: 0x4000000000000100(slab) raw: 4000000000000100 0000000000000000 ffff88005fda1fc0 0000000180550008 raw: ffffea00017f6780 0000000400000004 ffff88006c803980 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88005fda1980: fc fc fb fb fb fb fc fc fb fb fb fb fc fc fb fb ffff88005fda1a00: fb fb fc fc fb fb fb fb fc fc 00 00 00 00 fc fc ffff88005fda1a80: fb fb fb fb fc fc fb fb fb fb fc fc fb fb fb fb ffff88005fda1b00: fc fc 00 00 00 00 fc fc fb fb fb fb fc fc fb fb ffff88005fda1b80: fb fb fc fc fb fb fb fb fc fc fb fb fb fb fc fc ==================================================================@ Cc: syzkaller <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # 4.11 Fixes: 38321256 ("IB/core: Add support for idr types") Reported-by:
-
Hans de Goede authored
commit 0434352d upstream. Some other drivers may be waiting for our extcon to show-up, exiting their probe methods with -EPROBE_DEFER until we show up. These drivers will typically get the cable state directly after getting the extcon, this commit changes the int3496 code to wait for the initial processing of the id-pin to complete before exiting probe() with 0, which will cause devices waiting on the defered probe to get reprobed. This fixes a race where the initial work might still be running while other drivers were already calling extcon_get_state(). Fixes: 2f556bdb ("extcon: int3496: Add Intel INT3496 ACPI ... driver") Cc: stable@vger.kernel.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Eric Biggers authored
commit 29f4a67c upstream. If there is a blacklisted certificate in a SignerInfo's certificate chain, then pkcs7_verify_sig_chain() sets sinfo->blacklisted and returns 0. But, pkcs7_verify() fails to handle this case appropriately, as it actually continues on to the line 'actual_ret = 0;', indicating that the SignerInfo has passed verification. Consequently, PKCS#7 signature verification ignores the certificate blacklist. Fix this by not considering blacklisted SignerInfos to have passed verification. Also fix the function comment with regards to when 0 is returned. Fixes: 03bb7931 ("PKCS#7: Handle blacklisted certificates") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Eric Biggers authored
commit 971b42c0 upstream. When pkcs7_verify_sig_chain() is building the certificate chain for a SignerInfo using the certificates in the PKCS#7 message, it is passing the wrong arguments to public_key_verify_signature(). Consequently, when the next certificate is supposed to be used to verify the previous certificate, the next certificate is actually used to verify itself. An attacker can use this bug to create a bogus certificate chain that has no cryptographic relationship between the beginning and end. Fortunately I couldn't quite find a way to use this to bypass the overall signature verification, though it comes very close. Here's the reasoning: due to the bug, every certificate in the chain beyond the first actually has to be self-signed (where "self-signed" here refers to the actual key and signature; an attacker might still manipulate the certificate fields such that the self_signed flag doesn't actually get set, and thus the chain doesn't end immediately). But to pass trust validation (pkcs7_validate_trust()), either the SignerInfo or one of the certificates has to actually be signed by a trusted key. Since only self-signed certificates can be added to the chain, the only way for an attacker to introduce a trusted signature is to include a self-signed trusted certificate. But, when pkcs7_validate_trust_one() reaches that certificate, instead of trying to verify the signature on that certificate, it will actually look up the corresponding trusted key, which will succeed, and then try to verify the *previous* certificate, which will fail. Thus, disaster is narrowly averted (as far as I could tell). Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
-
Eric Biggers authored
commit 4b34968e upstream. The asymmetric key type allows an X.509 certificate to be added even if its signature's hash algorithm is not available in the crypto API. In that case 'payload.data[asym_auth]' will be NULL. But the key restriction code failed to check for this case before trying to use the signature, resulting in a NULL pointer dereference in key_or_keyring_common() or in restrict_link_by_signature(). Fix this by returning -ENOPKG when the signature is unsupported. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled and keyctl has support for the 'restrict_keyring' command: keyctl new_session keyctl restrict_keyring @s asymmetric builtin_trusted openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: a511e1af ("KEYS: Move the point of trust determination to __key_link()") Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
-
Eric Biggers authored
commit 437499ee upstream. The X.509 parser mishandles the case where the certificate's signature's hash algorithm is not available in the crypto API. In this case, x509_get_sig_params() doesn't allocate the cert->sig->digest buffer; this part seems to be intentional. However, public_key_verify_signature() is still called via x509_check_for_self_signed(), which triggers the 'BUG_ON(!sig->digest)'. Fix this by making public_key_verify_signature() return -ENOPKG if the hash buffer has not been allocated. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled: openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Reported-by:
Paolo Valente <paolo.valente@linaro.org> Cc: Paolo Valente <paolo.valente@linaro.org> Cc: <stable@vger.kernel.org> # v4.7+ Signed-off-by:
-
Eric Anholt authored
commit fe32a815 upstream. We were leaving them in the power on state (or the state the firmware had set up for some client, if we were taking over from them). The boot state was 30 core clocks, when we actually want to sample some time after (to make sure that the new input bit has actually arrived). Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org Signed-off-by:
-
Ben Gardner authored
commit fba4adbb upstream. One I2C bus on my Atom E3845 board has been broken since 4.9. It has two devices, both declared by ACPI and with built-in drivers. There are two back-to-back transactions originating from the kernel, one targeting each device. The first transaction works, the second one locks up the I2C controller. The controller never recovers. These kernel logs show up whenever an I2C transaction is attempted after this failure. i2c-designware-pci 0000:00:18.3: timeout in disabling adapter i2c-designware-pci 0000:00:18.3: timeout waiting for bus ready Waiting for the I2C controller status to indicate that it is enabled before programming it fixes the issue. I have tested this patch on 4.14 and 4.15. Fixes: commit 2702ea7d ("i2c: designware: wait for disable/enable only if necessary") Cc: linux-stable <stable@vger.kernel.org> #4.13+ Signed-off-by:
Ben Gardner <gardner.ben@gmail.com> Acked-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
